Compaq SystemPro

Compaq SystemPro
Compaq SystemPro

The SystemPro from Compaq was arguably the first true PC based server. It had a support for Intel's latest 486 chip, a 32-bit bus, RAID disk and dual-processor support well before its main rivals.[who?]

Contents

Innovative features

The SystemPro, along with the simultaneously released Compaq Deskpro 486, was one of the first two commercially available computer systems containing the new EISA bus. The SystemPro was also one of the first PC-style systems specifically designed as a network server, and as such was built from the ground up to take full advantage of the EISA bus. It included such features as multiprocessing (the original systems were asymmetric-only), hardware RAID, and bus-mastering network cards. All models of SystemPro used a full-height tower configuration, with eight internal hard drive bays.

Multiprocessing

CPU-board closeup

At its initial release in November 1989, the SystemPro supported up to two 33 MHz 386 processors, but early in 1990 33 MHz 486 processors became an option (the processors were housed on proprietary daughterboards). Because the system was asymmetric, 386 and 486 processors could be mixed. Single processor configurations were also available.

The only operating system which fully supported the SystemPro's asymmetric multiprocessing was a custom version of SCO Unix, sold by Compaq. However, when running OS/2, certain applications (notably Sybase SQL Server) could be offloaded to the second processor, and later, Novell NetWare SFT-III was able to offload its I/O engine. It is worth noting that the original versions of Windows NT (3.1) included a hardware abstraction layer specifically for the SystemPro; despite NT's symmetric multiprocessing design, this HAL could offload some kernel tasks to the second CPU. This made Windows NT 3.1 the only version of Windows to support multiprocessor 386-based machines.

System/Memory Architecture

The system used a state-of-the-art shared memory bus design, called Tri-Flex Architecture, to facilitate its multiprocessing capabilities.[citation needed] The original SystemPro shipped with 4MB 80ns DRAM, expandable up to 256MB using proprietary memory modules.

RAID

RAID-Controller closeup

The SystemPro also offered one of the first implementations of RAID (including RAID 5) available on a PC-based system. The original RAID card, called the IDA (Intelligent Drive Array) used a proprietary form of IDE, supporting up to 4 drives internally. At its release, the largest drive available was 210 MB. Two IDA cards could be installed, allowing all 8 hard drive bays to be filled (each IDA controller array would appear as a separate logical drive to the operating system, however), providing a grand total of 1.2 GB using RAID 5, or 1.6 GB using non-redundant striping (RAID 0). Another option called the IDA Expansion Array provided support for up to 7 drives in a single array (housed in an external tower chassis looking virtually identical to the SystemPro itself), using an early (and very proprietary) form of differential SCSI. Note that all hard drives in the SystemPro or the Expansion Array were internally mounted drives; hot swapping was not an option.

Market

The SystemPro was marketed for very high-end IT departments — generally those who had scaled up to the top end of LAN hardware, or those who were scaling down from minicomputers — and its pricing was set accordingly.[citation needed] At the time of launch, the "low-end" SystemPro (a single 33-MHz 386 CPU, 4 MB RAM, and two 120-MB hard drives) listed for $15,999 (USD); the same machine with 840 MB of storage (four 210-MB hard drives) listed for $25,999 (USD). A second 386 processor card cost $3,500 (USD), and an additional 32 MB of RAM was $21,999 (USD).

Legacy

The SystemPro line continued for several years, ending with the SystemPro XL (the only model that supported symmetric multiprocessing). It was replaced by the Compaq Proliant line, which introduced hot swappable drives and the rack mount chassis now popular in data centers. However, the SystemPro is notable for having established the PC-based server market, and setting a high watermark for the servers that followed.

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Compaq — Computer Corporation Industry PDA and Computer Hardware Founded February 1982 Headquarters Unincorpo …   Wikipedia

  • Compaq — Computer Corporation Листинг …   Википедия

  • Compaq Presario — Compaq Logo de Compaq Création Février 1982 Fondateur(s) Rod Canion, Jim Harris, Bill Murto …   Wikipédia en Français

  • Compaq Deskpro — EN Developer HP/Compaq CPU Intel Pentium III 300 MHz 500 MHz Memory 128 MB …   Wikipedia

  • Compaq Presario — Presario is a series of desktop computers and notebooks from Compaq. The Presario family of computers was launched for the consumer marketplace in September 1993. Although HP has since acquired Compaq, the Presario name was not discontinued due… …   Wikipedia

  • Compaq Evo — A Compaq Evo D510 Desktop Computer The Compaq Evo was a series of business desktop and laptop PCs and thin clients made by Compaq and Hewlett Packard (following the 2002 merger). The Evo brand was introduced by Compaq in May 2001 as a business… …   Wikipedia

  • Compaq — Logo de Compaq Création Février 1982 Fondateurs Rod Canion, Jim Harris, Bill Murto …   Wikipédia en Français

  • List of Hewlett-Packard products — The following is a partial list of products manufactured under the Hewlett Packard brand. Contents 1 Printers 1.1 LaserJet printers (color and monochrome) 1.2 ColorJet printers 1.3 …   Wikipedia

  • Hewlett-Packard — Coordinates: 37°24′49″N 122°08′42″W / 37.413579°N 122.14508°W / 37.413579; 122.14508 HP red …   Wikipedia

  • КОМПАК — (полн. Compaq Computer (Компак компьютер) американская фирма, поставщик портативных и настольных компьютеров, серверов и сетевого оборудования. Головной офис находится в Хьюстоне (Техас). В названии компании сочетаются два слова COMPAtability и… …   Энциклопедический словарь

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”