Vertical axis wind turbine

Vertical axis wind turbine

Vertical-axis wind turbines (VAWT) are a type of wind turbine where the main rotor shaft runs vertically. Among the advantages of this arrangement are that generators and gearboxes can be placed close to the ground, and that VAWT do not need to be pointed into the wind. Major drawbacks for the early designs (savonius, darrieus, giromill and cycloturbine) included the pulsatory torque that can be produced during each revolution and the huge bending moments on the blades. Later designs like turby, quietrevolution and aerotecture solved the torque issue by using the helical twist of the blades, similar to Gorlov's water turbines.

Drag-type VAWT, such as the Savonius rotor, typically operate at lower tipspeed ratios than lift-based VAWT such as Darrieus rotors and cycloturbines.

General Aerodynamics

The forces and the velocities acting in a Darrieus turbine are depicted in figure 1. The resultant velocity vector, vec{W}, is the vectorial sum of the undisturbed upstream air velocity, vec{U}, and the velocity vector of the advancing blade, -vec{omega } imesvec{R}.

vec{W}=vec{U}+left( -vec{omega } imesvec{R} ight)

Thus, the oncoming fluid velocity varies, the maximum is found for heta =0{}^circ and the minimum is found for heta =180{}^circ , where heta is the azimutal or orbital blade position. The angle of attack, alpha , is the angle between the oncoming air speed,W, and the blade's chord. The resultant airflow creates a varying, positive angle of attack to the blade in the upstream zone of the machine which switch sign in the downstream zone of the machine. From geometrical considerations, the resultant airspeed flow and the incidence angle are calculated as follows:

W=Usqrt{1+2lambda cos heta +lambda ^{2

alpha = an ^{-1}left( frac{sin heta }{cos heta +lambda } ight)

where lambda =frac{omega R}{U} is the tip speed ratio parameter.

The resultant aerodynamic force is decomposed either in lift (L) - drag (D) components or normal (N) - tangential (T) components. The forces are considered acting at 1/4 chord from the leading edge, in order to minimise the pitching moment. The aeronautical terms lift and drag are, strictly speaking, forces across and along the approaching net relative airflow respectively. The tangential force is acting along the blade's velocity and, thus, pulling the blade around, and the normal force is acting radially, and, thus, is acting against the bearings. The lift and the drag force are useful when dealing with the aerodynamic behaviour around each blade, i.e. dynamic stall, boundary layer, etc; while when dealing with global performance, fatigue loads, etc., it is more convenient to have a normal-tangential frame. The lift and the drag coefficients are usually normalized by the dynamic pressure of the relative airflow, while the normal and the tangential coefficients are usually normalized by the dynamic pressure of undisturbed upstream fluid velocity.

C_{L}=frac{L}1}/{2}; ho SW^{2 ext{ }; ext{ }C_{D}=frac{D}1}/{2}; ho SW^{2 ext{ }; ext{ }C_{T}=frac{T}1}/{2}; ho SU^{2 ext{ }; ext{ }C_{N}=frac{N}1}/{2}; ho SU^{2

References

ee also

*PacWind
*Windstar turbine


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Vertical-Axis Wind Turbine — (VAWT)   A type of wind turbine in which the axis of rotation is perpendicular to the wind stream and the ground …   Energy terms

  • Vertical-axis wind turbine — (VAWT)   A type of wind turbine in which the axis of rotation is perpendicular to the windstream and the ground.   U.S. Dept. of Energy, Energy Information Administration s Energy Glossary …   Energy terms

  • Wind turbine — Offshore wind farm using 5MW turbines REpower 5M in the North Sea off Belgium This article discusses wind powered electrical generators. See windmill for wind powered machinery used to grind grain or pump water. A wind turbine is a device that… …   Wikipedia

  • Wind turbine design — An example of a wind turbine, this 3 bladed turbine is the classic design of modern wind turbines Wind turbines History Design …   Wikipedia

  • Darrieus wind turbine — Fig. 1: A Darrieus wind turbine once used to generate electricity on the Magdalen Islands The Darrieus wind turbine is a type of vertical axis wind turbine (VAWT) used to generate electricity from the energy carried in the wind. The turbine… …   Wikipedia

  • Savonius wind turbine — Savonius wind turbines are a type of vertical axis wind turbine (VAWT), used for converting the power of the wind into torque on a rotating shaft. They were invented by the Finnish engineer Sigurd J. Savonius in 1922. Johann Ernst Elias Bessler… …   Wikipedia

  • Airborne wind turbine — An airborne wind turbine is a design concept for a wind turbine that is supported in the air without a tower. [cite web | title=Windmills in the Sky | work=Wired News: Windmills in the Sky | author=David Cohn | publisher=San Francisco: Wired News …   Wikipedia

  • Nacelle (wind turbine) — Components of a horizontal axis wind turbine (gearbox, rotor shaft and brake assembly) being lifted into the nacelle …   Wikipedia

  • Wind power — Wind power: worldwide installed capacity [1] …   Wikipedia

  • Turbine (disambiguation) — A turbine is a rotary engine that extracts energy from a fluid flow.Other pages about turbinesTypes of turbines*Gas turbine:*Jet engine:*Turbojet:*Turbofan:*Turbocharger:*Turboshaft*Steam turbine:*Compound turbine*Wind turbine:*Vertical axis wind …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”