- Stewarts & Lloyds
Stewarts & Lloyds was a steel tube manufacturer with its headquarters based at
Corby, Northamptonshire, England. The company was created in 1903 by the amalgamation of two of the largest iron and steel makers in Britain, A. & J. Stewart & Menzies Ltd, Coatbridge, North Lanarkshire, Scotland and Lloyd & Lloyd Ltd, Birmingham, England.
History: Stewart & Menzies Ltd
A. & J. Stewart & Menzies Ltd. was founded as A. & J. Stewart. Andrew Stewart was originally employed as a salesman by Eadies of Dalmarnock, South Lanarkshire, specialists in the manufacture of lap-welded and loose flange tubes. Stewart saw a market for gas pipe but the company would not acknowledge his proposals. In 1862, along with his brother James, Andrew set up business as a maker of butt-welded and lap-welded tubes establishing a small works at St. Enochs, Glasgow. The company met with rapid success and in 1867 moved to a large site at Coatbridge, North Lanarkshire, where they built the Clyde Tube Works. In 1882 the company was incorporated with limited liability as A. & J. Stewart Ltd.
In 1889 Andrew saw his sons set up their own business in Glasgow as tube manufacturers under the name of Stewart Brothers.In a rationalisation of the tube making industry in Scotland, A. & J. Stewart Ltd merged with Stewart Brothers and the Clydesdale Iron & Steel Company becoming A. & J. Stewart & Clydesdale Ltd. but in 1898, the company took on another new name when it acquired the business of James Menzies & Company becoming A. & J. Stewart & Menzies Ltd. From 1 January 1903 the company merged with English counterparts Lloyd & Lloyd Ltd.
History: Lloyd & Lloyd Ltd
The history of Lloyd & Lloyd Ltd closely paralleled that of A. & J. Stewart, establishing itself as one of the largest iron and steel tube manufacturers in England.
Iron orehad been mined in the Corby, Northamptonshirearea for some time, when Samuel Lloyd came to the village in 1880 and negotiated the purchase of the mineral rights for the Manor of Corby. Extraction commenced in the following year and the ore was then transported by rail to the Albion Works in the West Midlands. Lloyds Ironstone Company, who erected two blast furnaces on the edge of the village in 1910, started iron production but the main problems was the extraction of the ore itself, the physical act of getting the ore from the ground was in need of mechanization and before the end of the 19th century a mechanical digger, with a bucket capable of holding 11 cubic yards arrived in the mines. To increase production further a steam shovel, after finishing work on the construction of the Panama Canal, was brought to Corby. Its bucket could hold nearly three times the amount of its earlier, smaller brother.
The Clydeside Tube Co. Ltd., makers of weldless tubes was acquired by Lloyd & Lloyd in 1900 and was also brought into the merger.
History: Stewarts & Lloyds
The newly merged company, now named Stewarts & Lloyds Ltd set about to establish its position and extending its interests. In 1908 the company became colliery owners when they acquired the control of Robert Addie & Sons (Collieries) Ltd., although this interest was sold in 1924. Before the outbreak of World War I the company bought the British Welding Co of Motherwell, manufacturers of hydraulic welded tubes and established a new works at Tollcross, Glasgow. Following the end of the war the company gained control of the North Lincolnshire Iron Co Ltd, followed shortly afterwards by Alfred Hickman, steel makers, Bilston, Midlothian and their subsidiaries.
Increasing the sphere of the company continued in the latter 1920s, gaining control of the
VictaulicCo Ltd, producers of “ Victaulic” joints and Johnson couplings for pipelines, the Pothero Steel Tube Co Ltd and then the Birmingham steelworks of John Russell & Company.
Further colliery interests were acquired, when in 1923 the company gained control of
Kilnhurst Collieryin the South Yorkshire coalfield, although this was sub-leased to Sheffield steelmakers John Brown & Co. This interest was sold, along with its adjoining brickworks, to the Tinsley Park Colliery Company of Sheffieldin 1936.
In 1930, Stewarts & Lloyds Ltd entered into an agreement with
Tube Investments Ltd, of Abingdon, Oxon., which controlled a large number of tube making firms in the Midlands. Although this was to “facilitate exchange of information and technology” it resulted in S & L gaining a half interest in the Bromford Tube Co of Erdington, Birmingham, England, acquiring the other half in 1945; and in Howell & Co Ltd, Sheffield, this being given up in 1938.
The company decided to move to Corby, Northamptonshire in November 1932, enabling them to make use of the local iron ore to feed their blast furnaces and Bessemer steel converters. The new construction was carried out to a very tight timetable, from the clearing of the site in 1933 the first of the Corby blast furnaces was lit in May the following year. This was followed by coke from the new
coke ovensthe following month and the ore preparation and sinter plants in September. No.2 blast furnace was lit in November and the first steel came from the Bessemer converters on 27 December. The last of the originally planned blast furnaces (No.3) was lit in October 1935. Following a rebuild to increase capacity of No.2 furnace Corby works became the third cheapest pig ironproducing plant in the world.
From the late 1800's both founding companies had been represented in Australia as distributors of tube. Growing demand in Australia eventually led to the formation of a jointly owned company with Broken Hill Proprietary Limited (BHP) to be known as Buttweld Pty Ltd, and the establishment of Australia's first tubemaking plant at Newcastle in 1935. This company ultimately became
Tubemakers of Australia.
Looking for greater capacity, in 1936, a fourth blast furnace, a second sinter plant, a new Bessemer plant and new coking capacty, six new ovens being added to the existing battery and a new battery of 21 ovens, were constructed and in operation by the end of 1937.
To add to steel production two electric arc furnaces were built in 1941. The ingots cast from the electric furnace were of a different shape and size to any others and were shipped to Bilston for further processing.
By 1953, the company, making use of its original 8 work sites, became the main producer of steel tubes in Scotland producing around 250,000 tons of tubing, the bulk of which were used at the Corby site.
Further developments took place after World War II, an open-hearth steel making facility being commissioned in 1949. The Glebe coke ovens were extended to their maximum number of 141 in 1953 and plans for No. 6 coke oven battery were formulated shortly after. These were to be built on old quarry workings to the north of the Open-Hearth building and enough land was levelled to accommodate a complete blast furnace plant as well as for the coke ovens by-products plant and gasholder. No. 6 battery of 51 ovens was commissioned in 1961, however, after the footings were installed for the blast furnace, the rest of the construction was put "temporarily on hold", work was never continued.
In an attempt to make the Bessemer plant more efficient it was trialled with a blast enriched with oxygen, but when a
Basic oxygen steelmakingtest plant was built in 1960, a major change in steel production at the works was signalled. Trials were conducted using the LD process and in 1965, with a three vessel plant coming on stream the Bessemer plant closed, having produced almost 18 million tons of steel since 1934.
The end of Stewarts & Lloyds ownership ceased in 1967 when the steel industry was nationalised for the second time, and they became part of the
British SteelCorperation. Due to the high cost and low quality of local iron ore steel production at Corby was set to close in November 1979. This was delayed until 21 May 1980, due to a national steel strike, when the last coil came off the mill. In nearly 40 year of steel production they had produced almost 2.5 million tons of steel. Tubemaking continues to this day, initially based on steel supplied from Teessideand today CorusTubes is the largest customer of steel from South Wales.
Stewarts & Lloyds was formally dissolved in 1997.
The "War Effort"
In common with other steel producers, from the outbreak of
World War II, much of the output went to war-related usage. Possibly the biggest, and certainly the best-known, contribution of the works to the war effort was PLUTO, the Pipe Line Under The Ocean, a pipeline built, following the D-Daylandings to supply fuel for the invading forces. Almost 1,000 miles of steel tubes went into the project.
Another large contribution was the 15,000 miles of tube, used for the construction of beach defences, and which was covered with barbed wire, and other, more dangerous obstructions, known as "Wallace Swords". A total of over 275,000 miles (about 2,5 million tons) of tube were produced for war-related work during the 1939-45 period. Other works in the S & L group provided steel for shell forgings, finished shells and shot.
“Notes on the History and Development of Stewarts & Lloyds Ltd”, Charles C Smith (1954), Glasgow University.
Wikimedia Foundation. 2010.
Look at other dictionaries:
Scotland — For other uses, see Scotland (disambiguation). Scotland (English/Scots) Alba (Scottish Gaelic) … Wikipedia