Train horn

Train horn
Nathan model M5 locomotive air horn

Train horns are audible warning devices found on most diesel and electric locomotives. Their primary purpose is to alert persons and animals to the presence of a train, especially when approaching a grade crossing. They are also used for acknowledging signals given by railroad employees (i.e. during switching operations).

Contents

History and background

As diesel locomotives began to replace steam on most railroads, it was realized that the new locomotives were unable to efficiently utilize the steam whistles then in use.

Early internal combustion locomotives were initially fitted with small truck horns or exhaust-powered whistles, but these were found to be unsuitable and so the air horn design was scaled up and modified for railroad use.

Operation

Diagram of a typical locomotive air horn power chamber, showing operation

Train horns are operated by compressed air, typically 125-140 psi (8.6-9.6 bar), and fed from a locomotive main air reservoir. The flow of air throughout the horn produces an action known as oscillation. Oscillation in a train horn is accomplished via a diaphragm assembly enclosed within the power chamber. When air is applied to the horn, the diaphragm vibrates against a nozzle. The oscillation of the diaphragm against the nozzle produces sound.

The configuration and overall dimensions of the bell ("bell" being the correct term for the trumpet assembly) determine the fundamental and frequency produced (measured in hertz).

North American diesel locomotives manufactured prior to the 1990s utilized an air valve actuated by the engineer through the manipulation of a lever or pull cord. Use of this method made possible a practice known as "feathering", meaning that modulation of the horn's volume was possible through finer regulation of the air valve.

Many locomotives manufactured during the 1990s made use of pushbutton controls. In addition, several North American locomotives incorporated a sequencer pedal built into the cab floor beneath the operators position; that when depressed, sounded the grade crossing sequence.

Locomotives of European origin have featured pushbutton control of air horns since the mid-1960s.

Current production locomotives from GE Transportation Systems and Electro-Motive Diesel have utilized a lever-actuated solenoid valve.

Train horn manufacturers worldwide

North America

There have been several manufacturers of air horns for railroad use in North America over the years.

AirChime, Ltd.

AirChime, Ltd. traces their beginnings through the work of Robert Swanson in 1949. Prior to the early 1950s, locomotives were equipped with airhorns that sounded but a single note.

Swanson sought to develop an air horn which would mimic the sound of a classic steam whistle. Using ancient Chinese musical theory, Swanson produced the six-note model 'H6'. This was impractical for railroad use, due to its relatively large size. Railroad equipment operates over routes restricted by loading gauge, a difference of only a few inches may prohibit that equipment from operating on the line in question.

Swanson would later refine his 'H6' into the model 'H5'. As the numeric designation indicates, the horn sounds a five-note chord.

In 1950, AirChime introduced the 'M' series, a further improvement on the earlier horns through elimination of unnecessary moving parts. Among the earliest customers of the AirChime 'M' was the Southern Railway, who sought replacement horns for their motive power. In a public relations effort, the company announced this program through the placement of a full-page advertisement in the May 25, 1951 edition of the Washington Times-Herald.

Refurbished Nathan-AirChime model P5

Under Swanson's guidance, AirChime would focus on ease of mass production, low maintenance, and reliability in their air horn design, with the development of the 'P' (1953), and 'K' (1954) series.

AirChime model K3L, shown here in an Auburn University-inspired livery

As of recent, AirChime has been sold to their American licensee, Nathan Manufacturing, Inc., a division of Micro Precision Group, Inc, in Windham, Connecticut.[1]

Buell Air Horns

An air horn manufactured by the American Strombos Co., used on early locomotives as well as trucks

Originally founded in 1912 as The American Strombos Co. of Philadelphia, PA, Buell sold modified truck horns for rail use. They were often installed on small locomotives, electric interurban equipment. and railcars (for example the Doodlebugs).

Buell has recently made available a line of air horns specific for railroad equipment.[2]

Gustin Bacon Mfg. Co.

The Gustin Bacon Mfg. Co. of Kansas City, MO offered airhorns for use on railroad equipment prior to the Second World War.

Leslie Co.

Leslie Tyfon model A200 air horn, used on many first-generation diesel locomotives

The Leslie Company (originally of Lyndhurst, New Jersey, later Parsippany, finally relocating to Tampa, Florida in 1985) began horn production by obtaining the rights to manufacture the Kockums Mekaniska Verkstad product line of "Tyfon" brand airhorns, marketing these for railroad use beginning in the 1930s. Their model A200 series would later grace the rooftops of countless locomotives, such as the legendary Pennsylvania Railroad GG1, as well as thousands of EMD E and F-units. Leslie eventually introduced their own line of multi-note airhorns, known as the "Chime-Tone" series, in direct competition with AirChime.

Poor sales of the Chime-Tones (due to the horns requiring an ample volume of air) led the Leslie Company to introduce a new line of air horns utilizing interchangeable components while using less air to produce greater sound volume than the earlier "Tyfon" series. Developed by Kockums, this horn utilized a back-pressure power chamber design in order to enhance diaphragm oscillation. Known as the "SuperTyfon" series, these horns would eventually supplant the "Tyfon" in railroad service.

Leslie SuperTyfon model S-5T, regarded by many aficionados as the 'king of horns'

"SuperTyfon" horns were offered in single,[3] dual,[4] triple,[5] quad,[6] and five note[7] configurations.

Today, the company is known as Leslie Controls, Inc., and continues to manufacture "SuperTyfon" air horns for the railroad industry.[8]

Prime Manufacturing, Inc.

Prime model PM-990 locomotive air horn

Prime Manufacturing, Inc. had produced locomotive appliances for many years prior to their entry into the air horn market in 1972. Their line of "Pneumatic Horns" was basically a derivative of the Leslie SuperTyfon design (having taken advantage of a patent expiration at the time), though their horns employed heavier castings than equivalents from Leslie, and sounding a somewhat richer timbre as a result.

Sales were brisk (railroads such as Union Pacific and the Burlington Northern were notable customers), but ultimately disappointing. Finding themselves increasingly unable to compete in a niche market dominated by Leslie and AirChime, Prime ceased air horn production c. 1999.

Westinghouse Air Brake Co.

Westinghouse model E2-B1 locomotive air horn. Note how this horn consists of three 'singles' bolted onto a common plate.

Westinghouse Air Brake Company (known throughout the 19th and 20th Century as WABCO) was the first to offer air horns specifically for use with railroad equipment, as early as the 1910s. Their model E2 was recognized by many for the deep, commanding tone it produced.

In response to the Leslie multi-note "Chime-Tone" series, Westinghouse offered a bracket to which three of their single-note "honkers" could be bolted onto, achieving the same result as what the Chime-Tones did for Leslie.

Overshadowed later on by Leslie and AirChime, WABCO eventually ceased production of most horns for the North American market.

At present, the company is known as Wabtec, Inc., and continues to offer their line of 'Pneumatic horns' for the export market.[9]

Australia

Railways in Australia often utilize the same type of air horns as their North American counterparts. Examples from both the Leslie Co. and AirChime Ltd. can be found there.

United States

On April 27, 2005, the Federal Railroad Administration (FRA), which enforces rail safety regulations, published the final rule on the use of locomotive horns at highway-rail grade crossings.[10] Effective June 24, 2005, the rule requires that locomotive horns be sounded at all public grade crossings at least 15 seconds, but not more than 20 seconds before entering a crossing. This rule applies when the train speed is below 45 mph (70 km/h). At 45 mph or above, trains are still required to sound their horn at the designated location (usually denoted with a whistle post).

The pattern for blowing the horn remains two long, one short, and one long. This is to be repeated as necessary until the lead locomotive fully occupies the crossing. Locomotive engineers retain the authority to vary this pattern as necessary for crossings in close proximity, and are allowed to sound the horn in emergency situations no matter where the location.

A ban on sounding locomotive horns in Florida was ordered removed by the FRA after it was shown that the accident rate doubled during the ban. The new ruling preempts any state or local laws regarding the use of the train horn at public crossings. This also provides public authorities the option to maintain and/or establish quiet zones provided certain supplemental or alternative safety measures are in place, and the crossing accident rate meets government standards.

The following are the required horn signals listed in the operating rules of most North American railroads, along with their meanings. Signals are illustrated by an "o" for short sounds, and "" for longer sounds. (Note that these signals and their indications are updated to reflect modern practice.) Those rules marked with an asterisk (*) must be sounded when and/or where applicable. Those signals without an asterisk convey information to employees; they must be used when voice communication is not available.

Rule    Sequence Indication
14 (a) o Applying air brakes while standing.
14 (b) * – – Proceeding. Releasing air brakes.
14 (f) * o o – Acknowledging a flagman's stop signal.
14 (g) * o o Acknowledging any signal not otherwise provided for.
14 (h) * o o o Backing up.
14 (j) o o o o Calling for signals.
14 (l) * – – o – 1. Trains or engines approaching public highway grade crossings shall sound the horn at least 15 seconds, but no more than 20 seconds before the lead engine enters the crossing. Trains or engines travelling at speeds greater than 45 mph shall begin sounding the horn at or about, but not more than, one-quarter mile (1,320 feet) in advance of the nearest public crossing. Even if the advance warning provided by the horn will be less than 15 seconds in duration. This signal is to be prolonged or repeated until the engine or train occupies the crossing; or, where multiple crossing are involved, until the last crossing is occupied. 2. Approaching tunnels, yards, or other points where railroad workers may be at work. 3. Passing standing trains.
14 (m) * o Approaching passenger station.
14 (o) o – Inspect train for a leak in brake pipe system or for brakes sticking.
14 (p) * Succession of sounds Warning to people and/or animals.
14 (q) * – o When running against the current of traffic: 1. Approaching stations, curves, or other points where view may be obscured: and 2. Approaching passenger or freight trains and when passing freight trains.

Exception: Engine horn signals required by rules 14 (b) and 14 (h) do not apply after momentary stops in continuous switching movements.

Germany

Horn signals are regulated in the Zp category of the Eisenbahn-Bau- und Betriebsordnung. Their most common use today is when approaching a level crossing that lacks barriers, and for warning purposes.

Whistle posts are labeled with the letter "P" (for 'Pfeifen'). Common signals are:[11]

Sequence Meaning
_ Zp 1 - Generic "Attention" signal.
o Zp 2 - Tighten handbrakes.
o o Zp 3 - Strongly tighten handbrakes.
_ _ Zp 4 - Loosen handbrakes
ooo ooo ooo Zp 5 - Emergency. Brake immediately.
_ o _ Zp 11 - Come. Used to call out for train staff.

France

Train horns are sounded where a whistle post (marked with the letter "S" for "siffler") is present. If the whistle post is labelled "J" (meaning "jour"), the horn is only to be sounded between 0700 and 2000. Horns must also be sounded when passing an oncoming train, and shortly before reaching the last car of the train.

India

Locomotive horns are sounded before trains enter a station and upon departure, passing over bridges as well as road crossings.

United Kingdom

UK diesel and electric locomotives are usually fitted with two-tone horns and, in the past, both tones were routinely used. However, because of noise complaints, new rules were introduced in 2007:[12]

  1. The introduction of a night time quiet period, between 2300 and 0700 when trains will no longer routinely sound their horns at whistle boards (they will always sound their horns when people are seen on the track)
  2. That where the technology is available, drivers should only use the low tone from the two tone horn at whistle boards.
  3. For all new or replacement train horns on trains capable of travelling up to 160 km/h a much lower minimum sound pressure level has been established – and a maximum sound level has been introduced (min 101dB and max 106dB)

Placement on locomotives

As many individuals do with their personal vehicles, railroads order locomotives with different options in order to suit their operating practices. Air horns are no exception, and railroad mechanical forces mount these on locomotives where they are deemed most effective at projecting sound, and for ease of maintenance.

Below are a few images depicting the most common mounting applications:



Train horns and popular culture

In railroad use

Due to the encroachment of development, some suburban dwellers (known derisively as NIMBYs and CAVE People) have opposed railroad use of the air horn as a trackside warning device.[13] Residents in some communities have attempted to establish quiet zones, in which train crews are instructed not to sound their horns, except in case of emergency.[14] Given train velocity, as well as the disparity in mass between railroad equipment and an automobile, truck, or pedestrian, collisions often occur with little or no allowance for preventative action to be taken by the train crew. The effects of a train colliding with an automobile have been likened to that same automobile striking an empty soda can.[15]

Recent years have seen an increase of horn theft from railroad property.[16] It is believed that the majority of these crimes are perpetrated for the benefit of vehicle customizers and truckers.

In non-railroad use

Chevrolet Astro modified with the addition of a locomotive horn and bell.

Some people collect train horns for their rarity and nostalgic value. Enthusiasts often attend organized events, where specially modified motor vehicles (actual railroad locomotives in some instances) perform runbys. This differs from those who use air horns as a public nuisance, in that permission is often secured from local property owners to conduct such events.[17]

In the world of sports, train horns are often used as goal horns in ice hockey.

Audio samples

The following are samples of select air horns as used in North American railroad service:[18]

See also

Train horn being fitted to a vintage EMD GP30 diesel locomotive at the 2006 Oak Ridge Horn Honk and Collectors Meet.

References

  1. ^ "Micro Precision Group, Inc.". http://www.microprecisiongroup.com/. Retrieved 2010-01-06. 
  2. ^ "Buell Air Horns". http://www.buellairhorns.com/rail-c-75.html. Retrieved 2009-06-10. 
  3. ^ "Five Chime Consultants: Leslie S-25". http://atsf.railfan.net/airhorns/s25.html. Retrieved 2008-11-20. 
  4. ^ "Five Chime Consultants: Leslie S-2B". http://atsf.railfan.net/airhorns/s2b.html. Retrieved 2008-11-20. 
  5. ^ "Five Chime Consultants: Leslie S-3L". http://atsf.railfan.net/airhorns/s3l.html. Retrieved 2008-11-20. 
  6. ^ "Five Chime Consultants: Leslie SL-4T". http://atsf.railfan.net/airhorns/sl4t.html. Retrieved 2008-11-19. 
  7. ^ "Five Chime Consultants: Leslie S-5T". http://atsf.railfan.net/airhorns/s5t.html. Retrieved 2008-11-20. 
  8. ^ "Leslie Controls, Inc.". http://www.lesliecontrols.com/Products/airwhistles.htm. Retrieved 2008-11-19. 
  9. ^ "Wabtec, Inc.". http://www.wabtec.com/home.asp. Retrieved 2010-01-06. 
  10. ^ "Federal Railroad Administration". http://www.fra.dot.gov/us/content/1318. Retrieved 2008-11-19. 
  11. ^ "www.stellwerke.de - Signalsystem in Deutschland". http://www.stellwerke.de/signal/deutsch/zp.html. Retrieved 2007-02-05.  (German)
  12. ^ http://www.rssb.co.uk/Pages/Train_Horns.aspx
  13. ^ "Noise Abatement Society". http://www.noiseabatementsociety.com. Retrieved 2007-03-28. 
  14. ^ "Rockland Quiet Zone". http://www.rocklandquietzone.com/. Retrieved 2008-11-19. 
  15. ^ "Brunswick Fire Department". http://www.brunswickme.org/fire/2006%20Events/train_and_vehicle_crash_on_may_9.htm. Retrieved 2008-03-11. 
  16. ^ "SMRF Archives". http://listserv.dartmouth.edu/scripts/wa.exe?A2=ind0512C&L=smrf&P=7062. Retrieved 2008-01-28. 
  17. ^ "Official Oak Ridge Horn Honk website". http://www.oakridgehornhonk.org/. Retrieved 2009-02-21. 
  18. ^ "Locomotivehorns.info". http://Locomotivehorns.info. Retrieved 2008-11-03. 

External links

  • Five Chime Consultants - The original online spotters' guide to diesel locomotive horns as used throughout the United States and Canada. Fully illustrated with audio samples and background information on each horn.
  • Locomotive Horns - Extensive guide to collecting diesel locomotive air horns, recommended viewing for new and established collectors alike.

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Horn — may refer to: * Horn (anatomy), the pointed projection of the skin of various animals, as an organ or its material * Horn (surname)In music and sound * Horn (instrument), sometimes called a French horn, a brass musical instrument constructed of… …   Wikipedia

  • Train whistle — A train whistle or air whistle, (originally referred to as a steam trumpet), is an audible signaling device on a steam locomotive used to warn that the train is approaching, and to communicate with rail workers.The older steam whistles were… …   Wikipedia

  • Horn (acoustic) — A horn is a tapered sound guide designed to provide an acoustic impedance match between a sound source and free air. This has the effect of maximising the efficiency with which sound waves from the particular source are transferred to the air.… …   Wikipedia

  • Train event recorder — A Train event recorder (also called an On train monitoring recorder (OTMR)) is similar to the flight data recorder found on aircraft. It records data about the operation of train controls and performance in response to those controls and other… …   Wikipedia

  • Horn Expedition — The Horn Scientific Expedition was the first primarily scientific expedition to study the natural history of central Australia. It took place from May to August 1894, with expedition members first traveling by train from Adelaide to the railhead… …   Wikipedia

  • Train Home (Chris Smither album) — Infobox Album Name = Train Home Type = album Artist = Chris Smither Released = July 8, 2003 Recorded = Genre = Blues, Folk Length = Label = Hightone Records Producer = David Goodrich Reviews = * Allmusic Rating|3|5 [http://www.allmusic.com/cg/amg …   Wikipedia

  • Air horn — The air horn is a device designed to create an extremely loud noise. It is usually composed of a pressurized air source coupled to a horn through a valve which allows the device to be turned on and off. Air horns have been installed on large semi …   Wikipedia

  • Dinosaur Train — Title screen logo Also known as Jim Henson s Dinosaur Train Genre Children s CGI animated cartoon Created by Craig …   Wikipedia

  • Vehicle horn — Klaxon redirects here. For the English dance punk band, see Klaxons. A single reed bulb horn. A vehicle horn is a sound making device used to warn others of the approach of the vehicle or of its presence. Automobiles, trucks, ships, and trains… …   Wikipedia

  • Bataille de Little Big Horn — Pour les articles homonymes, voir Horn. 45°34′12″N 107°25′55″O / …   Wikipédia en Français

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”