- Robotic telescope
A robotic telescope is an astronomical
telescopeand detector system that makes observations without the intervention of a human. In astronomical disciplines, a telescope qualifies as robotic if it makes those observations without being operated by a human, even if a human has to initiate the observations at the beginning of the night, or end them in the morning. A robotic telescope is distinct from a remote telescope, though an instrument can be both robotic and remote.
Robotic telescopes are complex systems that typically incorporate a number of subsystems. These subsystems include devices that provide telescope pointing capability, operation of the detector (typically a CCD camera), control of the dome or telescope enclosure, control over the telescope's focuser, detection of
weatherconditions, and other capabilities. Frequently these varying subsystems are presided over by a master control system, which is almost always a software component.
Robotic telescopes operate under closed loop or open loop principles. In an open loop system, a robotic telescope system points itself and collects its data without inspecting the results of its operations to ensure it is operating properly. An open loop telescope is sometimes said to be operating on faith, in that if something goes wrong, there is no way for the control system to detect it and compensate.
A closed loop system has the capability to evaluate its operations through redundant inputs to detect errors. A common such input would be position encoders on the telescope's axes of motion, or the capability of evaluating the system's images to ensure it was pointed at the correct
field of viewwhen they were exposed.
Most robotic telescopes are
small telescopes. While large observatory instruments may be highly automated, few are operated without attendants.
History of professional robotic telescopes
Robotic telescopes were first developed by
astronomers after electromechanicalinterfaces to computers became common at observatories. Early examples were expensive, had limited capabilities, and included a large number of unique subsystems, both in hardware and software. This contributed to a lack of progress in the development of robotic telescopes early in their history.
By the early 1980s, with the availability of cheap computers, several viable robotic telescope projects were conceived, and a few were developed. The 1985 book, "Microcomputer Control of Telescopes", by Mark Trueblood and Russell M. Genet, was a landmark engineering study in the field. One of this book's achievements was pointing out many reasons, some quite subtle, why telescopes could not be reliably pointed using only basic astronomical calculations. The concepts explored in this book share a common heritage with the telescope mount error modeling software called
Tpoint, which emerged from the first generation of large automated telescopes in the 1970s, notably the 3.9m Anglo-Australian Telescope.
Since the late 1980s, the
University of Iowahas been in the forefront of robotic telescope development on the professional side. The Automated Telescope Facility(ATF), developed in the early 1990s, was located on the roof of the physics building at the University of Iowa in Iowa City. They went on to complete the Iowa Robotic Observatory, a robotic and remote telescope at the private Winer Observatoryin 1997. This system successfully observed variable stars and contributed observations to dozens of scientific papers. In May 2002, they completed the Rigel Telescope. Each of these was a progression toward a more automated and utilitarian observatory.
One of the largest current networks of robotic telescopes is
RoboNet, operated by a consortium of UK universities. The Lincoln Near-Earth Asteroid Research(LINEAR) Project is another example of a professional robotic telescope. LINEAR's competitors, the Lowell Observatory Near-Earth-Object Search, Catalina Sky Survey, Spacewatch, and others, have also developed varying levels of automation.
In 2002, the RAPid Telescopes for Optical Response (RAPTOR) project pushed the envelope of automated robotic astronomy by becoming the first fully autonomous closed–loop robotic telescope. RAPTOR was designed in 2000 and began full deployment in 2002. Its first light on one of the wide field instruments was in late 2001, with the second wide field system coming online in early 2002. Closed loop operations began in 2002. Originally the goal of RAPTOR was to develop a system of ground-based telescopes that would reliably respond to satellite triggers and more importantly, identify transients in real-time and generate alerts with source locations to enable follow-up observations with other, larger, telescopes. It has achieved both of these goals quite successfully. Now RAPTOR has been re-tuned to be the key hardware element of the [http://www.thinkingtelescopes.lanl.gov/ Thinking Telescopes Technologies Project] . Its new mandate will be the monitoring of the night sky looking for interesting and anomalous behaviors in persistent sources using some of the most advanced robotic software ever deployed. The two wide field systems are comprised of a mosaic of CCD cameras. The mosaic covers and area of approximately 1500 square degrees to a depth of 12th magnitude. Centered in each wide field array is a single fovea system with a field of view of 4 degrees and depth of 16th magnitude. The wide field systems are separated by a 38km baseline. Supporting these wide field systems are two other operational telescopes. The first of these is a cataloging patrol instrument with a mosaic 16 square degree field of view down to 16 magnitude. The other system is a .4m OTA with a yielding a depth of 19-20th magnitude and a coverage of .35 degrees. Three additional systems are currently undergoing development and testing and deployment will be staged over the next two years. All of the systems are mounted on custom manufactured, fast-slewing mounts capable of reaching any point in the sky in 3 seconds. The RAPTOR System is located on site at Los Alamos National Laboratory (USA) and has been supported through the Laboratory's Directed Research and Development funds.
In 2004, some professional robotic telescopes were characterized by a lack of design creativity and a reliance on
closed sourceand proprietary software. The software is usually unique to the telescope it was designed for and cannot be used on any other system. Often, robotic telescope software developed at universities becomes impossible to maintain and ultimately obsolete because the graduate students who wrote it move on to new positions, and their institutions lose their knowledge. Large telescope consortia or government funded laboratories don't tend to have this same loss of developers as experienced by universities. Professional systems generally feature very high observing efficiency and reliability. There is also an increasing tendency to adopt ASCOM technology at a few professional facilities (see following section). The need for proprietary software is usually driven by the competition for research dollars between institutions.
History of amateur robotic telescopes
In 2004, most robotic telescopes are in the hands of amateur astronomers. A prerequisite for the explosion of amateur robotic telescopes was the availability of relatively inexpensive CCD cameras, which appeared on the commercial market in the early 1990s. These cameras not only allowed amateur astronomers to make pleasing images of the night sky, but also encouraged more sophisticated amateurs to pursue research projects in cooperation with professional astronomers. The main motive behind the development of amateur robotic telescopes has been the tedium of making research-oriented astronomical observations, such as taking endlessly repetitive images of a variable star.
Following coverage of ASCOM in "
Sky & Telescope" magazine several months later, ASCOM architects such as Bob Denny, Doug George, Tim Long, and others later influenced ASCOM into becoming a set of codified interface standards for freeware device drivers for telescopes, CCD cameras, telescope focusers, and astronomical observatory domes. As a result amateur robotic telescopes have become increasingly more sophisticated and reliable, while software costs have plunged. ASCOM has also been adopted for some professional robotic telescopes.
Meanwhile, ASCOM users designed ever more capable master control systems. Papers presented at the
Minor Planet Amateur-Professional Workshops (MPAPW) in 1999, 2000, and 2001 and the International Amateur-Professional Photoelectric PhotometryConferences of 1998, 1999, 2000, 2001, 2002, and 2003 documented increasingly sophisticated master control systems. Some of the capabilities of these systems included automatic selection of observing targets, the ability to interrupt observing or rearrange observing schedules for targets of opportunity, automatic selection of guide stars, and sophisticated error detection and correction algorithms.
Remote telescope system development started in 1999, with first test runs on real telescope hardware in early 2000. RTS2 was primary intended for
Gamma ray burstfollow-up observations, so ability to interrupt observation was core part of its design. During development, it became an integrated observatory management suite. Other additions included use of the Postgresqldatabase for storing targets and observation logs, ability to perform image processing including astrometry and performance of the real-time telescope corrections and a web-based user interface. RTS2 was from the beginning designed as a completely open sourcesystem, without any proprietary components. In order to support growing list of mounts, sensors, CCDs and roof systems, it uses own, text based communication protocol. The RTS2 system is described in papers appearing in 2004 and 2006.
Instrument Neutral Distributed Interface(INDI) was started in 2003. In comparison to the Microsoft Windowscentric ASCOM standard, INDI is a platform independent protocol developed by Elwood C. Downey of ClearSky Institute to support control, automation, data acquisition, and exchange among hardware devices and software frontends.
By 2004, robotic observations accounted for an overwhelming percentage of the published scientific information on asteroid
orbits and discoveries, variable star studies, supernova light curves and discoveries, comet orbits and gravitational microlensing observations.
All early phase
Gamma ray burstobservations were carried by robotic telescopes.
Remote Telescope Markup Language
* Robotic telescopes
** [http://www.skylive.it/ Skylive, Realtime astronomy] with instruments in Italy and Australia
** [http://www.astro.physik.uni-goettingen.de/~hessman/MONET/links.html List] of professional robotic telescopes (with map and statistics).
** [http://www.thinkingtelescopes.lanl.gov/ the Thinking Telescopes Technologies Project] at Los Alamos National Laboratory.
** [http://www.raptor.lanl.gov/ RAPTOR] network of robotic telescopes.
** [http://pairitel.org PAIRITEL] The Peters Automated Infrared Imaging Telescope (Mt Hopkins, AZ). The largest aperture (1.3m) telescope devoted to observing infrared transients.
** [http://www.astro.livjm.ac.uk/RoboNet/ The RoboNet] network of robotic telescopes.
** [http://www.slooh.com/ Slooh] , Commercial robotic telescopes with live viewing.
** [http://www.faulkes-telescope.com Faulkes Telescope] , An educational outreach program giving educators and their students access to world class robotic telescopes
** [http://www.bareket-astro.com/ Bareket observatory | Israel] . An educational program that give remote telescope access (web based) access for teachers and students.
** [http://www.telescope.org/index2.php Bradford Robotic Telescope] . A robotic telescope in the Canary Islands operated by the University of Bradford in England. It is available to schools, teachers, and the public.
** [http://www.global-rent-a-scope.com/ Global Rent-a-Scope] . A growing network of publicly available robotic telescopes. The public can rent time on these scopes and gather data.
* Standards-developing bodies
** [http://www.ivoa.net/twiki/bin/view/IVOA/IvoaVOEvent VOEvent] , International Virtual Observatory standard for observation notification
** [http://www.telescope-networks.org/wiki/index.php/Main_Page HTN] The Heterogeneous Telescope Network - standards for telescope intercommunications
** [http://ascom-standards.org/ ASCOM Initiative] , not for profit standards-developing body for ASCOM technology.
** [http://www.lcogt.net Las Cumbres Observatory] , A non profit organization deploying a global network of robotic telescopes for science and education
** [http://indi.sourceforge.net/ INDI] , The Instrument-Neutral-Distributed-Interface project.
* Robotic telescope software
** [http://www.audela.org/english_audela.php Audela] , A free and open source astronomy software intended for digital observations
** [http://rts-2.sourceforge.net RTS2] , Remote Telescope System, open source observatory manager
Wikimedia Foundation. 2010.
Look at other dictionaries:
Bradford Robotic Telescope — Das Bradford Robotic Telescope ist ein vollautomatisches Teleskop, welches auf Teneriffa steht. Es arbeitet Aufträge automatisch ab, die zuvor über den Browser eingegeben wurden. Dieser Service ist kostenlos und kann von jedem genutzt werden … Deutsch Wikipedia
Telescope — A telescope is an instrument designed for the observation of remote objects and the collection of electromagnetic radiation. The first known practically functioning telescopes were invented in the Netherlands at the beginning of the 17th century … Wikipedia
Robotic spacecraft — An artist s interpretation of the MESSENGER spacecraft at Mercury A robotic spacecraft is a spacecraft with no humans on board, that is usually under telerobotic control. A robotic spacecraft designed to make scientific research measurements is… … Wikipedia
Liverpool Telescope — Infobox Telescope bgcolour = name = Liverpool Telescope caption = organization = Liverpool John Moores University location = Observatorio del Roque de Los Muchachos, La Palma coords = altitude = weather = wavelength = built = website = style =… … Wikipedia
Faulkes Telescope Project — The Faulkes Telescope Project is supported by Las Cumbres Observatory Global Telescope Network (LCOGTN) and Dill Faulkes Educational Trust. It provides access to the Faulkes Telescopes (North and South) for schools and groups involved with… … Wikipedia
Las Cumbres Observatory Global Telescope — (LCOGT) is a non profit private operating foundation directed by the technologist Wayne Rosing. It aims to build a global network of longitudinally spaced robotic telescopes for scientific and educational use. At present, the nascent network… … Wikipedia
Remote Telescope Markup Language — The Remote Telescope Markup Language (RTML) is an XML dialect for controlling remote and/or robotic telescopes.It was created by UC Berkeley s Hands On Universe project in 1999.External links* http://hou.lbl.gov/rtml/ *… … Wikipedia
James Webb Space Telescope — General information Organization NASA, with significant contributions from ESA and CSA … Wikipedia
Hubble Space Telescope — Infobox Space telescope name = Hubble Space Telescope (HST) caption = The Hubble Space Telescope as seen from Space Shuttle Discovery during its second servicing mission (STS 82) organization = NASAESASTScI alt names = nssdc id =… … Wikipedia
Optical telescope — Eight Inch refracting telescope (Chabot Space and Science Center) An optical telescope is a telescope which is used to gather and focus light mainly from the visible part of the electromagnetic spectrum for directly viewing a magnified image for… … Wikipedia