Acousto-optics is a branch of
physicsthat studies the interactions between sound waves and light waves, especially the diffractionof laser lightby ultrasoundor soundin general.
Optics has had a very long and full history, from
ancient Greece, through the renaissanceand modern times. [cite web
title =Optics Highlights: 1. Ancient History
accessdate =2007-08-07 ] As with optics, acoustics has a history of similar duration, again starting with the ancient Greeks. [cite web
title =The History of Acoustics
accessdate =2007-08-07 ] In contrast, the acousto-optic effect has had a relatively short history, beginning with Brillouin predicting the
diffraction of lightby an acoustic wave, being propagated in a medium of interaction, in 1922. [cite journal
title =Diffusion of Light and X-rays by a Transparent Homogeneous Body
journal =Ann. Phys. (Paris)
year =1922] This was then confirmed with experimentation in 1932 by Debye and Sears, [Citation
title =On the scattering of light by supersonic waves
journal =Proc. Nat. Acad. Sci. USA
year =1932 ] and also by Lucas and Biquard. [Citation
title =Optical properties of solid and liquid medias subjected to high-frequency elastic vibrations
journal =Journal Phys.
The particular case of diffraction on the first order, under a certain
angle of incidence, (also predicted by Brillouin), has been observed by Rytow in 1935. Raman and Nath (1937) have designed a general ideal model of interaction taking into account several orders. This model was developed by Phariseau (1956) for diffraction including only one diffraction order.
In general, acousto-optic effects are based on the change of the
refractive indexof a medium due to the presence of sound waves in that medium. Sound waves produce a refractive index grating in the material, and it is this grating that is “seen” by the light wave. [cite paper
author =Gal, M.
title =Modulation and switching of light
version =Lecture Notes on Optoelectronics
publisher =The University of New South Wales
date =2005 ] These variations in the refractive index, due to the pressure fluctuations, may be detected optically by refraction, diffraction, and interference effects,cite book
coauthors =Drain, L.E.
title =Laser Ultrasonics: Techniques and Applications
publisher =Taylor & Francis
date =January 1, 1990
isbn =978-0750300506 ] reflection may also be used.
The acousto-optic effect is extensively used in the measurement and study of ultrasonic waves. However, the growing principal area of interest is in acousto-optical devices for the deflection,
modulation, signal processingand frequency shifting of light beams. This is due to the increasing availability and performance of lasers, which have made the acousto-optic effect easier to observe and measure. Technical progresses in both crystal growthand high frequency piezoelectric transducers have brought valuable benefits to acousto-optic components' improvements.
Along with the current applications, acousto-optics presents interesting possible application. Its can be used in
nondestructive testing, structural health monitoringand biomedicalapplications, where optically generated and optical measurements of ultrasound gives a non-contact method of imaging.
The Acousto-optic effect
The acousto-optic effect is a specific case of
photoelasticity, where there is a change of a materials permittivity, , due to a mechanicalstrain . Photoelasticity is the variation of the optical indicatrix coefficients caused by the strain given bycite web
title =Acousto-optic effect
accessdate = 2007-08-07 ] ,
where is the photoelastic
tensorwith components, , = 1,2,…,6.
Specifically in the acousto-optic effect, the strains are a result of the acoustic wave which has been excited with in a transparent medium. This then gives rise to the variation of the refractive index. For a plane acoustic wave propagating along the z axis, the change in the refractive index can be expressed as,
The generated refractive index, (2), gives a
diffraction gratingmoving with the velocitygiven by the spread on the sound wave in the medium. Light which then passes through the transparent material, is diffracted due to this generated refraction index, forming a prominent diffraction pattern. This diffraction pattern correspond with a conventional diffraction grating at angles from the original direction, and is given by,
where is the
wavelengthof the optical wave, is the wave length of the acoustic wave and is the integer order maximum.
Light diffracted by an acoustic wave of a single
frequencyproduces two distinguished diffraction types. These are Raman-Nath diffractionand Bragg diffraction.
Raman-Nath diffraction is observed with relatively low acoustic frequencies, typically less than 10MHz, and with a small acousto-optic interaction length, l, which is typically less than 1cm. This type of diffraction occurs at arbitrary angle of incidence, .
In contrast, Bragg diffraction occurs at higher acoustic frequencies, usually exceeding 100MHz. The observed diffraction pattern generally consists of two diffraction maxima; these are the zeroth and the first orders. However, even these two maxima only appear at definite incidence angles close to the Bragg angle, . The first order maximum or the Bragg maximum is formed due to a selective reflection of the light from the wave fronts of ultrasonic wave. The Bragg angle is given by the expression,
where is the wavelength of the incident light wave (in a vacuum), is the acoustic frequency, is the velocity of the acoustic wave, is the refractive index for the incident optical wave, and is the refractive index for the diffracted optical waves.
In general, there is no point at which
Bragg diffractiontakes over from Raman-Nath diffraction. It is simply a fact that as the acoustic frequency increases, the number of observed maxima is gradually reduced due to the angular selectivity of the acousto-optic interaction increasing Traditionally, the type of diffraction, Bragg or Raman-Nath, is determined by the conditions Q >> 1 and Q << 1 respectively, where Q is given by,
which is known as the Klein-Cook parameter. Since, in general, only the first order diffraction maximum is used in acousto-optic devices,
Bragg diffractionis preferable due to the lower optical losses. However, the acousto-optic requirements for Bragg diffractionlimit the frequency range of acousto-optic interaction. As a consequence, the speed of operation of acousto-optic devices is also limited.
Three categories of acousto-optic devices will be discussed. They include the acousto-optic modulator, filter and deflector.
By varying the parameters of the acoustic wave, including the
amplitude, phase, frequency and polarization, properties of the optical wave may be modulated. The acousto-optic interaction also makes it possible to modulate the optical beam by both temporal and spatial modulation.
A simple method of modulating the optical beam travelling through the acousto-optic device is done by switching the acoustic field on and off. When off the light beam is undiverted, the intensity of light directed at the Bragg diffraction angle is zero. When switched on and Bragg diffraction occurs, the intensity at the Bragg angle increases. So the acousto-optic device is modulating the output along the Bragg diffraction angle, switching it on and off. The device is operated as a modulator by keeping the acoustic wavelength (frequency) fixed and varying the drive power to vary the amount of light in the deflected beam. [cite web
title =ELECTRO-OPTIC AND ACOUSTO-OPTIC DEVICES
accessdate =2004-10-28 ]
There are several limitations associated with the design and performance of acousto-optic modulators. The acousto-optic medium must be designed carefully to provide maximum light intensity in a single diffracted beam. The time taken for the acoustic wave to travel across the diameter of the light beam gives a limitation on the switching speed, and hence limits the modulation bandwidth. The finite velocity of the acoustic wave means the light cannot be fully switched on or off until the acoustic wave has travel across the light beam. So to increase the bandwidth the light must be focused to a small diameter at the location of the acousto-optic interaction. This minimum focused size of the beam represents the limit for the bandwidth.
The principle behind the operation of acousto-optic filters is based on the wavelength of the diffracted light being dependent on the acoustic frequency. By tuning the frequency of the acoustic wave, the desired wavelength of the optical wave can be diffracted acousto-optically.
There are two types of the acousto-optic filters, the collinear and non-collinear filters. The type of filter depends on geometry of acousto-optic interaction.
The polarization of the incident light can be either ordinary or extraordinary. For the definition, we assume ordinary polarization. Here the following list of symbols is used,cite web
title =Acousto-optic effect: Filters
accessdate = 2007-08-07 ]
: the angle between the acoustic wave vector and the crystallographic axis z of the crystal;
: the wedge angle between the input and output faces of the filter cell (the wedge angle is necessary for eliminating the angular shift of the diffracted beam caused by frequency changing);
: the angle between the incident light wave vector and  axis of the crystal;
: the angle between the input face of the cell and acoustic wave vector;
: the angle between deflected and non-deflected light at the central frequency;
Refractive indices of the ordinary () and extraordinary () polarized beams are determined by taking into account their dispersive dependence.
An acousto-optic deflector spatially controls the optical beam. In the operation of an acousto-optic deflector the power driving the acoustic transducer is kept on, at a constant level, while the acoustic frequency is varied to deflect the beam to different angular positions. The acousto-optic deflector makes use of the acoustic frequency dependent diffraction angle, where a change in the angle as a function of the change in frequency given as, [cite web
title =Acousto-optic effect: Deflector
accessdate = 2007-08-07 ]
where and are the acoustic wavelength and velocity of the acoustic wave respectively.
AOD technology has made practical the
Bose-Einstein condensationfor which the 2001 Nobel Prize in Physicswas awarded to Eric A. Cornell, Wolfgang Ketterle and Carl E. Wieman. [ [http://nobelprize.org/nobel_prizes/physics/laureates/2001/illpres/ The Nobel Prize in Physics 2001 ] ] Another application of acoustic-optical deflection is optical trapping of small molecules.
AODs are essentially the same as acousto-optic modulators (AOMs). In an AOM, only the amplitude of the sound wave is modulated (to modulate the intensity of the diffracted laser beam), whereas in an AOD, both the amplitude and frequency are adjusted, making the engineering requirements tighter for an AOD than an AOM.
Some materials displaying acousto-optic effect include
fused silica, arsenic trisulfide, tellurium dioxideand tellurite glasses, lead silicate, Ge55As12S33, mercury(I) chloride, lead(II) bromide, and other materials.
Wikimedia Foundation. 2010.
Look at other dictionaries:
acousto-optics — akustooptika statusas T sritis fizika atitikmenys: angl. acousto optics; optoacoustics vok. Akustooptik, f; Optoakustik, f; Schalloptik, f rus. акустооптика, f pranc. acousto optique, f; optique acoustique, f; opto acoustique, f … Fizikos terminų žodynas
acousto-optics — akustooptika statusas T sritis Standartizacija ir metrologija apibrėžtis Fizikos šaka, tirianti elektromagnetinių ir ultragarso bangų sąveiką kietuosiuose kūnuose ir skysčiuose, kurianti akustooptinius tyrimo metodus. atitikmenys: angl. acousto… … Penkiakalbis aiškinamasis metrologijos terminų žodynas
acousto-optics — akustooptika statusas T sritis Standartizacija ir metrologija apibrėžtis Technikos šaka, kurianti įvairius įtaisus, kurių veikimas grindžiamas akustooptiniais reiškiniais. atitikmenys: angl. acousto optics vok. Akustooptik, f; Schalloptik, f rus … Penkiakalbis aiškinamasis metrologijos terminų žodynas
acousto-optics — akustooptika statusas T sritis chemija apibrėžtis Mokslas, tiriantis elektromagnetinių bangų ir garso bangų sąveiką kietuosiuose kūnuose ir skysčiuose. atitikmenys: angl. acousto optics rus. акустооптика … Chemijos terminų aiškinamasis žodynas
Acousto-Optic Deflector — Acousto Optic deflectors= An acousto optic deflector spatially controls the optical beam. In the operation of an acousto optic deflector the power driving the acoustic transducer is kept on, at a constant level, while the acoustic frequency is… … Wikipedia
acousto-optique — akustooptika statusas T sritis fizika atitikmenys: angl. acousto optics; optoacoustics vok. Akustooptik, f; Optoakustik, f; Schalloptik, f rus. акустооптика, f pranc. acousto optique, f; optique acoustique, f; opto acoustique, f … Fizikos terminų žodynas
Acousto Optical Spectrometer — The principle of an AOS is based on the diffraction of light at ultrasonic waves. A piecoelectric transducer, driven by the RF signal (from the receiver), generates an acoustic wave in a crystal (the so called Bragg cell). This acoustic wave… … Wikipedia
Index of optics articles — Optics is the branch of physics which involves the behavior and properties of light, including its interactions with matter and the construction of instruments that use or detect it. Optics usually describes the behavior of visible,… … Wikipedia
Nonlinear optics — (NLO) is the branch of optics that describes the behaviour of light in nonlinear media, that is, media in which the dielectric polarization P responds nonlinearly to the electric field E of the light. This nonlinearity is typically only observed… … Wikipedia
Active optics — is a relatively new technology for reflecting telescopes developed in the 1980s, which has more recently enabled the construction of a generation of telescopes with 8 metre primary mirrors. Active optics works by actively adjusting the telescope… … Wikipedia