European Aviation Safety Agency

European Aviation Safety Agency

Infobox European Union agency
name=European Aviation
Safety Agency



image size=120px



x = 91
y = 138
location=Cologne, Germany
pillar=European Community
signdate=15 July 2002
establish=28 September 2003
director=Patrick Goudou
administrative director= [http://www.easa.europa.eu/home/dir_ad_en.html Markku Junkkari]
website= [http://www.easa.europa.eu/home/index.html easa.europa.eu]

European Aviation Safety Agency (EASA) is an agency of the European Union (EU) with offices in Cologne, Germany, which has been given specific regulatory and executive tasks in the field of civilian aviation safety. It was created on 28 September 2003, and will reach full functionality in 2008, taking over functions of the JAA (Joint Aviation Authorities). EFTA countries have been granted participation in the agency.The agency’s responsibilities include:
* expert advice to the European Union for drafting new legislation;
* implementing and monitoring safety rules, including inspections in the Member States;
* type-certification of aircraft and components, as well as the approval of organisations involved in the design, manufacture and maintenance of aeronautical products;
* authorization of third-country (non EU) operators;
* safety analysis and research.

EASA/JAA differences. The JAA was headquartered at Hoofddorp, Amsterdam. One difference between EASA and JAA is that EASA has legal regulatory authority within the European Union (EU) through the enactment of its regulations through the European Commission, Council of the European Union and European Parliament, while most of the JAA regulatory products were harmonized codes without direct force of law. Also, some JAA nations such as Turkey were outside the EU whereas by definition, EASA is an agency of the EU and other nations adopt its rules and procedures on a voluntary basis.

EASA jurisdiction. EASA has jurisdiction over new type certificates and other design-related airworthiness approvals for aircraft, engines, propellers and parts. EASA works with the National Aviation Authorities (NAAs) of the EU members but has taken over many of their functions in the interest of aviation standardisation across the EU. EASA is also responsible for assisting the European Commission in negotiating international harmonisation agreements with the Rest Of the World (ROW) on behalf of the EU member states and also concludes technical agreements at a working level directly with its counterparts around the world such as the US Federal Aviation Administration (FAA). EASA also sets policy for aeronautical repair stations (Part 145 organizations in Europe and the US - also known as Part 571 organizations in Canada) and issues repair station certificates for repair stations located outside the EU (which permits foreign repair stations to perform work acceptable to the European Union on EU aircraft). EASA has developed regulations for air operations, flight crew licensing and non-EU aircraft used in the EU and these shall apply after the required European legislation to expand the Agency's remit enters into force (the legislation was published on 19 March 2008 [http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2008:079:0001:0049:EN:PDF] )

EASA Regulations

EASA Part-66 Certifying Staff

In Europe, Aircraft Maintenance Certifying Personnel have to comply to [http://www.easa.europa.eu/home/index.html part-66 Certifying Staff] of the EASA.

Part 66 is based on the older JAR system and the required training level follows the ATA 104 system. There are 3 levels of authorization:

Category A (Line Maintenance Mechanic): Basic A category License + Task Training (Level depends on Task Complexity) + Company Certification Authorization for specific Tasks ("A category A aircraft maintenance licence permits the holder to issue certificates of release to service following minor scheduled line maintenance and simple defect rectification within the limits of tasks specifically endorsed on the authorisation. The certification privileges shall be restricted to work that the licence holder has personally performed in a Part-145 organisation"),

Category B1 (Mechanical) and/or B2(Avionics) (Line Maintenance Technician): Basic B1/B2 category License + Type Training (i.e. Line & Base Maintenance i.a.w. ATA 104 Level III) + Company Certification Authorization ("A category B1 aircraft maintenance licence shall permit the holder to issue certificates of release to service following maintenance, including aircraft structure, powerplant and mechanical and electrical systems. Replacement of avionic line replaceable units, requiring simple tests to prove their serviceability, shall also be included inthe privileges. Category B1 shall automatically include the appropriate A subcategory", "A category B2 aircraft maintenance licence shall permit the holder to issue certificates of release to service following maintenance on avionic and electrical systems").

Category C (Base Maintenance Engineer): Basic C category license + Type Training (Line & Base Maintenance i.a.w. ATA 104 Level III for the first Type Rating and ATA 104 Level I training for subsequent Aircraft Types of similar technology, otherwise Level III training) + Company Certification Authorization ("A category C aircraft maintenance licence shall permit the holder to issue certificates of release to service following base maintenance on aircraft. The privileges apply to the aircraft in its entirety in a Part-145 organisation").

A significant difference between the US and the European systems is that in the United States, aircraft maintenance technicians (Part 65 Airframe and Powerplant Mechanics) are permitted to work under their own certificates and approve their own work for return to service. European Part 66 certificate holders are required to perform their functions under the aegis of a Part 145 organization for Transport Category and Large (MTOM>5700 kg) Airplanes. The part 145 organization in the EASA system has the authority to approve for return to service. Many non-European countries have been moving toward the European approach, most notably Canada (See Part 571 of the Canadian Aviation Regulations).

EASA Part-145 Maintenance Organisation Approval

To obtain approval to be an aeronautical repair station, an organisation must write, submit and keep updated a 'Maintenance Organisation Exposition (MOE). To support their MOE they must have a documented set of procedures. Thirdly the organisation must have a compliance matrix to show how they meet the requirements of Part-145.

EASA Part-M Continuing Airworthiness

EASA Part-M consists of several subparts. The noteworthy subparts are F (Maintenance for aircraft below 5700kg in non commercial environment), G (Continuing Airworthiness Management Organization = CAMO, coordinating the compliance of aircraft with maintenance program, airworthiness directives and service bulletins) - the airworthiness code is available on the EASA website ( [easa.europa.eu] ) in the regulations section.

EASA Part-147 Training Organisation Requirements

To go with Part-66 on the issuing of licenses is the larger area of setting up and gaining approval for a training school for aircraft mechanics. Part-147 governs the larger situation of establishing such a training school.

EASA Part-21 Subpart J Design Organisation

'design organisation' means an organisation responsible for the design of aircraft, aircraft engines, propellers, auxiliary power units, or related parts and appliances, and holding, or applying for, type-certificates, supplemental type-certificates, changes or repairs design approvals or ETSO Authorisations. A design organisation holds DOA, Design Organisation Approval. A DOA-List enlisting all companies holding DO Approval with their capabilities can be downloaded from the EASA web-site.Part 21 requirements for Design Organisation Approvals and Production Organisation Approvals, as described in Regulation (EC) 1702/2003 on 'Implementing Rules'

EASA Part-21 Subpart G Production Organisation

A company holding Production Organisation Approval (POA), has the approval to built and certify aircraft parts when a DOA POA agreement is in place.A part built for an aircraft can be certificated with an EASA Form One as approved for a particular aircraft type once is has been installed as prototype to an aircraft and has been certificated by a Design Organisation with a Minor Change Approval, a Supplemental Type Certificate (STC) or a Type Certificate (TC).

EASA Safety Analysis & Research activities

The work of the European Aviation Safety Agency centres on ensuring the highest levels of civil aviation safety, through certification of aviation products, approval of organisations to provide aviation services, development and implementation of a standardised European regulatory framework.

These tasks are supported by:
* coordination of internal and external safety improvement initiatives. For instance the [http://easa.europa.eu/essi/webapp/essi/www/index.php European Strategic Safety Initiative (ESSI) ] is an aviation safety partnership between EASA, other regulators and the industry aiming to further enhance safety for citizens in Europe and worldwide through safety analysis, implementation of cost effective action plans, and coordination with other safety initiatives worldwide.
* providing reports concerning the safety of European and worldwide aviation,
* focal point for coordination of aviation accident investigation safety recommendations.

EASA Certification

On 28 September 2003, the EASA took over responsibility for the airworthiness and environmental certification of all aeronautical products, parts, and appliances designed, manufactured, maintained or used by persons under the regulatory oversight of EU Member States.

The Certification work also includes all post-certification activities, such as the approval of changes to, and repairs of, aeronautical products and their components, as well as the issuing of airworthiness directives to correct any potentially unsafe situation.

All type-certificates are therefore now issued by the EASA and are valid throughout the European Union. It also carries out the same role for foreign organisations involved in the manufacture or maintenance of such products. The EASA relies on national aviation authorities who have historically filled this role and concludes contractual arrangements to this effect.

Notes and references

ee also

* EUROCONTROL
* Civil Aviation Authority
* FAA
* ICAO

External links

* [http://easa.europa.eu/ EASA Website]
* [http://www.easa.eu.int/ws_prod/g/g_links.php EASA Member States]
* [http://easa.europa.eu/essi/ European Strategic Safety Initiative]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • European Aviation Safety Agency — Sitz der EASA in Köln Die Europäische Agentur für Flugsicherheit, (European Aviation Safety Agency; EASA), ist die Luftsicherheitsbehörde der Europäischen Union. Sie wurde am 15. Juli 2002 auf Beschluss des Europäischen Rates gegründet und hat… …   Deutsch Wikipedia

  • Agency of the European Union — European Union This article is part of the series: Politics and government of the European Union …   Wikipedia

  • European Union acronyms, jargon and working practices — European Union (EU) acronyms and jargon is a terminology set that has developed as a form of shorthand, to quickly express a (formal) EU process, an (informal) institutional working practice, or an EU body, function or decision, and which is… …   Wikipedia

  • Aviation accidents and incidents — Thunderbird 1st year Capt. Christopher Stricklin ejected from his USAF F 16 aircraft at an airshow at Mountain Home Air Force Base, Idaho, on September 14, 2003. While performing a Reverse Half Cuban Eight, Stricklin realized he could not pull up …   Wikipedia

  • European Organisation for the Safety of Air Navigation — The goal for EUROCONTROL is to develop, coordinate and plan for implementation of pan European air traffic management strategies and their associated action plans in an effort involving national authorities, air navigation service providers,… …   Wikipedia

  • European Cockpit Association — Infobox Union name= ECA country= European Union affiliation= members= 34 organisations; 38,100 pilots and flight engineers full name= European Cockpit Association native name= founded= 1991 current= head= dissolved date= dissolved state= merged… …   Wikipedia

  • European Civil Aviation Conference — The European Civil Aviation Conference (ECAC) or Conférence Européenne de l Aviation Civile (CEAC) is an international organization with close ties to the United Nations, the International Civil Aviation Organization, the Council of Europe and… …   Wikipedia

  • Aviation regulations — Most countries administrations have regulatory authorities devoted to producing and publishing regulations for aeronautical operations.Countries, organizations and publicationsIn Canada, the publication is called Canadian Aviation Regulations ,… …   Wikipedia

  • Aviation Medical Examiner — An Aviation Medical Examiner (AME), in the United States and other countries, is a physician designated by the local aviation authority given the authority to perform physical examinations and issue aviation medical certificates.The International …   Wikipedia

  • Directorate-General for Mobility and Transport (European Commission) — European Union This article is part of the series: Politics and government of the European Union …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”