Toyota A engine

Toyota A engine

Infobox Automobile engine


name= A series engine family
manufacturer=Toyota

The A Series engines are a family of straight-4 internal combustion engines with displacement from 1.3 L to 1.8 L produced by Toyota Motor Corporation. The series has cast iron engine blocks and aluminum cylinder heads. The series began in the late 1970s with the 1A, an SOHC engine with a displacement of 1.5 L. Toyota joint venture partner Tianjin FAW Xiali still produces 1.3 L 8A and recently restarted production of the 5A. In between, many interesting variations were produced, including one of the first 5-valve engines (the 4A) and the 170 hp (127 kW) supercharged 4A-GZE.

1A

The 1.5 L (1452 cc) 1A was produced in 1978 and 1979. It was a 2-valve SOHC engine.

2A

The 1.3 L (1295 cc) 2A was produced from 1979 through 1986. Cylinder bore was 75 mm (2.99 in) and stroke was 71.4 mm (2.81 in). It was a 2-valve SOHC design like its predecessor.

Output ranged from 65-75 hp) at 3000-3100 rpm

3A

The 1.5 L (1452 cc) 3A was produced from 1979 through 1988. Cylinder bore was 77.5 mm (3.05 in) and stroke was 77 mm (3.03 in). It was a 2-valve SOHC like the 1A and 2A. There were California-spec (3A-C), Japan-spec (3A-U), transverse (3A-L), and swirl-intake (3A-S) versions of the same basic design.

Power output ranged from just 62 hp (46 kW) at 4800 rpm all the way to 90 hp (67 kW) at 6000 rpm. Torque was less spread from 75 ft·lbf (101 N·m) at 2800 rpm to 89 ft·lbf (120 N·m) at 4000 rpm.

Toyota models that had this engine:
AE85 Corolla
AL25 Tercel

4A

The 4A was produced from 1980 through 1998. All 4A engines have a displacement of 1.6 L (1587 cc). Cylinder bore was enlarged from the previous 3A engines at 81 mm (3.19 in), but stroke remained the same as the 3A at 77 mm (3.03 in), giving it an oversquare bore/stroke ratio which favoured high revs.

Numerous variations of the basic 4A design were produced, from SOHC 2-valve all the way to DOHC 5-valve versions. Power was also extremely varied, from 70 hp (52 kW) at 4800 rpm in the basic California-spec 4A-C to 170 hp (127 kW) at 6400 rpm in the supercharged 4A-GZE.

4A-C

The 4A-C was a SOHC inline four (I4) 8-valve carburettor motor which produced 78-90hp (58-67kW) @ 4800 rpm, torque: 85 ft·lbf (115 N·m) @ 2800 rpm* (may vary). power and torque figures vary from different regions of the world.

North American market engines:
* 4A-C 1.6 L I4, 8-valve SOHC, carb, 90 hp (67 kW) European market engines:
* 4A-C 1.6 L, I4, 8-valve SOHC, carb, 84 hp (63 kW) Australian market engines:
* 4A-C 1.6 L, I4, 8-valve SOHC, carb, 78 hp (58 kW)

Toyota models that had this engine:

* Corolla AE71 RWD
* Corolla AE86 RWD (Australian model)
* Corolla AE82 FWD

4A-E

Fuel injection was added for the 1981 through 1988 4A-E. This pushed output to 78 hp (58 kW) at 5600 rpm and 87 ft·lbf (117 N·m) at 4000 rpm in export form.

A special Japan-spec transverse 4A-ELU was also produced in 1986. Output for this engine was 100 hp (75 kW) at 5600 rpm and 101 ft·lbf (136 N·m) at 4000 rpm.

4A-F

A narrow-valve (22.3°) DOHC 16-valve carb version, the 4A-F, was produced from 1987 through 1990. Output was 96 hp (67 kW) at 6000 rpm and 95 ft·lbf (128 N·m) at 3600 rpm.Toyota models that had this engine:

* Corolla AE92 SR5: FWD
* Corolla AE92 sedan: FWD
* Corolla AE92 Break: FWD

4A-FE

The 1987–1998 4A-FE is the descendant of the carbureted 4A-F. This version, although from the same series and the same generation as the 4A-GE, is different from its "brother" in terms of performance and power. Although both have the same displacement and are DOHC, they were optimized for different uses. The first obvious difference are the valves, the engine's intake and exhaust valves were placed 22.3° apart (compared to 50° in the G-Engines). The second is that it employed a "slave cam system", the camshafts being geared together and driven off one camshaft's sprocket (both camshafts' sprockets on the G-Engine are rotated by the timing belt). Some of the less directly visible differences were poorly shaped ports in the earlier versions, a slow burning combustion chamber with heavily shrouded valves, less aggressive camshaft profiles, ports of a small cross sectional area, a very restrictive intake manifold with long runners joined to a small displacement plenum and other changes. Even though the valve angle is closer to what is considered in some racing circles to be ideal for power (approximately 25 degrees), its other design differences and the intake which is tuned for a primary harmonic resonance at low revs means that it has about 20% less power compared to the 4A-GE. The plus side of this design is that it improved fuel efficiency and torque, the down side is that it compromises power. Power rating varies during certain generations that had the engine.

The difference between the two generations of this engine can be identified by the external shape of the engine, the first generation (1987–1993) have a more rugged look, a plate on the head which read "16valve EFI", and the fuel injectors in the head. The second generation had a higher profile cams design in the head, the cam cover having ribs throughout its length and the injectors in the intake manifold runners. The second generation engine was produced from 1992 until 1998.cite web|url=http://www.toyoland.com/engines/4A-F.html|title=toyoland.com 4af and 7af engines|accessdate=2007-07-18]

Toyota designed this engine with fuel economy in mind. The 4A-FE is basically the same as the 4A-F (introduced in the previous generation of Corollas), the most apparent difference being the fuel delivery system. The 4A-F used a carburetor, while the 4A-FE used electronic fuel injection system (notice the "E"). Also, the 4A-FE had extra power. The engine was succeeded by the 3ZZ-FE, a 1.6-liter engine with VVT-i technology.

* Engine displacement: 1.6 liters (1587 cc)
* Layout: DOHC Inline-4 (Straight-4)
* Valves: 16, 4 for each cylinder
* Power: 105 hp (77 kW) @ 5800 rpm(Europe/Japan spec: 115 hp (84 kW) @ 6000 rpm)
* Torque: 101 ft·lbf (137 N·m) @ 4800 rpm
* Redline: 6300 rpm
* Fuel Delivery System: MPFI"Note: power and torque specs are from the 1988–1992 North American Corollas."

Although not as powerful as the 4A-GE, both engines are renowned for the power they produce from such a low displacement (relative to other engines). Toyota engineers had skillfully optimized the power and torque from the company's relatively low-displacement engines.

The engine was used in the Toyota Corolla Sedan from 1988 to 1998 and in the 5th Generation Celica ST models from 1989 to 1993 both in North America and Europe. European Camry used this engine from '87 to '91.

4A-G (16-valve)

The next major modification was the high-performance 4A-G, with the fuel injected version, the 4A-GE, being the most powerful. It is speculated that the 4A-GE is actually a road-going version of the Ford Cosworth BDA racing engine, reverse engineered by Toyota as the bore and stroke dimensions are similar and there are many similarities in the engine design, making it a reliable engine for motorsports applications. The reliability and performance of these engines has earned them a fair number of enthusiasts and a fan base as they are a popular choice for an engine swap in to other Toyota cars such as the KE70 and KP61. New performance parts are still available for sale even today because of its strong fan base. Production of the various models of this version lasted for five generations, from 1983 through 1991 for 16-valve versions and the 5-valve 4A-GE lasted through 1998.

The first-generation 4A-GE which was introduced in 1983 replaced the "2T-G" in most applications. This engine was identifiable via silver cam covers with the lettering on the upper cover painted black and blue, as well as the presence of three reinforcement ribs on the back side of the block. It was extremely light and strong for a production engine using an all-iron block, and produced Convert|112|hp|kW|0|abbr=on at 6600 rpm and 97 ft·lbf (131N·m) of torque at 4800 rpm in the American market. The use of an air flow meter (MAF) sensor, which restricted air flow slightly but produced cleaner emissions that conformed to the U.S. regulations, limited the power to 112 hp whereas the Japanese model — which used a manifold absolute pressure (MAP) sensor — produced Convert|130|PS|kW|0|abbr=on. The 4A-GE was one of the earliest inline-4 engines to have both a DOHC 16 valve configuration (four valves per cylinder, two inlet, two exhaust) and electronic fuel injection (EFI).

Toyota designed the engine for performance; the valve angle was a relatively wide 50 degrees, which at the time was believed to be ideal for high power production. Today, it is to be noted that more modern high reving engines have since closed up the valve angle to 20 to 25 degrees, which is now believed to be ideal for high reving engines with high power per litre. The first generation 4AGE is nicknamed the "bigport" engine because it had inlet ports of a very large cross sectional area. While the port cross section was suitable for a very highly modified engine at very high revs it caused a considerable drop in low down torque due to the decreased air speeds at those revs. To compansate for the reduced air speed the first-generation engines included the TVIS feature, in which dual intake runners are fitted with butterfly valves that opened at approxmently 4200 RPM. The effect was that at lower revs where the airspeed would normally be slow, four of the eight runners were closed, this forced all the engine to draw in all its air through half the runners in the manifold. This raised the airspeed which caused better cylinder filling and also better fuel atomisation. This enabled the torque curve to still be intact at lower engine speeds, allowing for better performance across the entire speed band and a broad, flat torque curve around the crossover point. During rising engine speed, a slight lurch can occur at the crossover point and an experienced driver will be able to detect the shift in performance. Production of the first-generation engine model lasted through 1987.

The second-generation 4A-GE produced from 1987 to 1989 featured larger diameter bearings for the con-rod big ends (42mm) and added four additional reinforcement ribs on the back of the engine block, for a total of seven. The TVIS feature is maintained. It is visually similar to the first-generation engine and the power output is unchanged, but the upper cam cover now featured red and black lettering. The first- and second-generation engines are very popular with racers and tuners because of the ease of modification, simple design, and lightness. The TVIS equipped model is an ideal candidate for a turbocharging overhaul because it contains the so-called "big-port head", meaning the head had the large cross sectional area intlet ports.

The third-generation appeared in 1989 and was in production until 1991. This engine has the silver cam covers with the words only written in red, hence the nickname "red top". Toyota increased the compression ratios from 9.4:1 to 10.3:1. To correct the air-speed problems of the earlier generations of engine the heads inlet ports were redesigned to have smaller cross section inlet ports, and hence has been nickanmed as the "smallport head". This change in the intlet ports negated the need to have the need for the earlier twin runner manifold and was replaced with a single runner manifold. Additional engine modifications to extend life and the reliability included under piston cooling oil squirters, thicker connecting rods and other components. Also of note the pistons were changed to accept a 20mm fully floating gudgen pin unlike the 18mm pressed in pins of the earlier versions. All non-US market 4A-GEs continued to use a MAP sensor, while all of the US-market Toyota 4A-GE came with a MAF sensor. The only exception was the US-market 1990-91 Geo Prizm GSi, which was equipped with the MAP. This engine revision upped the power to 138 hp (103 kW) at 7200 rpm with a torque of 110 ft·lbf (149 N·m) at 4800 RPM..

The 4A-GE was first introduced in the 1983 Sprinter Trueno AE86 and the Corolla Levin AE86 sports version. The AE86 marked the end of the 4A-GE as a rear wheel drive (RWD or FR) mounted engine, alongside the RWD AE86/AE85 coupes a front wheel drive (FWD or FF) corolla (the AE82) was produced and future Corollas/Sprinters were all based around the FF layout. The engine was retired from North American Corollas in 1991, although it continued to be available in the Geo Prizm GSi (sold through Chevrolet dealerships) from 1990 to 1992.

Clarification: In the U.S. market, the 4A-GE engine was first used in the 1985 model year Corolla GT-S only, which is identified as an "AE88" in the VIN but uses the AE86 chassis code on the firewall as the AE88 is a "sub" version of the AE86. The 4A-GE engines for the 1985 model year are referred to as "blue top" as opposed to the later "red top" engines, because the paint color on the valve covers is different, to show the different engine revision, using different port sizes, different airflow metering, and other minor differences on the engine.

The American Spec AE86 (VIN AE88, or GT-S) carried the 4A-GE engine. In other markets, other designations were used. Much confusion exists, even among dealers, as to which models contained what equipment, especially since Toyota split the Corolla line into both RWD and FWD versions, and the GT-S designation was only well known as a Celica version at that time.

Toyota models that have had this engine:
*Toyota MR2 AW11: Mid-engine RWD
*Corolla AE86 GT-S: RWD (often referred to as generic AE86 chassis group)
*Corolla AE82 FX-16: FWD
*Corolla AE92 GT-S: FWD
*SE Sedan (North America): (RWD from 1983-87 and FWD from 1988-91)

Other models equipped with the 4A-GE:

*Chevrolet Nova (based on Toyota AE82 chassis; 1984–1988—these 4A-GE cars were exceptionally rare)
*Geo Prizm GSi (based on Toyota AE92 chassis; 1990–1992)

Specifications:
*Engine displacement: 1.6 litres (1587 cc)
*Layout: DOHC Inline-4 (Straight-4)
*Bore and Stroke: 81 mm × 77 mm
*Valves: 16, 4 per each cylinder
*Power: 115–140 hp (96–103 kW) @ 6600 rpm
*Torque: 109 ft·lbf (148 N·m) @ 5800 rpm
*Redline: 7600 rpm
*Fuel Delivery System: MPFI

Toyota sponsored the Champ Car Atlantic Championship from 1990 to 2005. A kit version of the 4A-GE from Toyota Racing Development was used to power Formula Atlantic cars during this period. This engine used a modified 16-valve head and produced approximately 240 horsepower at 8400 rpm, revving out to 10-12,000rpm.

4A-GE (20-valve)

Fourth Generation "Silver-Top""
The fourth-generation 4A-GE was produced from 1991 to 1995. It has silver cam covers with chrome letters, hence the nick name "silver top". This engine yet again features a completely revamped head where the 16-valve design is replaced with a 20-valve design. The Toyota Variable Valve Timing (VVT) is used in the intake cam for improved low rpm torque and economy, increased compression ratio (10.5:1), the valve angle was closed up to 37.5 degrees from the previous 50 degrees and the inlet system was replaced with a short manifold and four individual throttle bodies governed by an air flow sensor. Another large change from the previous 4A-GE engines was the inlet port angle, while the previous engines used an old fasioned curved inlet port the 20 valve engines used a very upright straight port. This engine produces 158 hp (118 kW) at 7400 rpm with 162 N·m at 5200 rpm of torque.

Applications:
* 1992 Toyota Levin/Trueno "AE101": GT Apex, GT-V Models
* 1992 Toyota Corolla "AE101": GT, FX Models

Fith Generation "Black-Top""
The fifth-generation 4A-GE was produced from 1995 to 1998 is the final version of the 4A-GE and has black cam covers. This engine is fondly known as the "black top" yet again features even higher compression ratio (11:1), the air flow sensor is replaced with a MAP sensor, the diameter of the four individual throttle bodies was increased from 42 mm to 45 mm, the exhaust port diameter was increased, the inlet cam lift was increased from 7.9mm to 8.2mm and the inlet ports were significantly improved in shape, contour and also the width at opening at the head was increased, . This revision upped the power to 162 hp (121 kW) at 7800 rpm with 162 N·m at 5200 rpm of torque.

Applications:
* 1995 Toyota Levin/Trueno "AE111": BZG, BZR, BZV Models
* 1998 Toyota Corolla "AE111": GT, Carib BZ, RSi Models

4A-GZE

The 4A-GZE (produced in various forms from 1986 through 1995) was the supercharged version. Based on the same block and head, the 4A-GZE was equipped with a roots-type supercharger and therefore the compression ratio, valve timing and ports were modified. It was used in the supercharged AW11 Toyota MR2, rated at 145 hp (108 kW) and 140 ft·lbf (190 N·m). Later versions of this engine are rated 165 hp (127 kW) and 155 ft·lbf (210 N·m) for the AE92 and AE101 Corolla.

These engines are also popular for a turbo conversion, as many parts do not need to be modified to support the extra boost. [ [http://www.toysport.com/Technical%20Information/4ag_tech_notes.htm 4AG Tech Notes] .]

5A

A smaller 1.5 L (1498 cc) 5A-F was produced in 1987 and the fuel injected 5A-FE was produced that year and again from 1995 through 1998. Both used a cylinder bore of 78.7 mm (3.1 in) and a stroke of 77 mm (3.0 in). Both had 4 valves per cylinder with DOHC heads and used the narrow 22.3° valve angle.

Toyota joint venture partner Tianjin FAW Xiali now produces the 5A-FE (dubbed 5A+) for its Vela and Weizhi (C1) subcompact sedans.

Output for the carb version was 85 hp (63 kW) at 6000 rpm and 90 ft·lbf (122 N·m) at 3600 rpm. Output for the 1987 FI version was 104 hp (78 kW) at 6000 rpm and 97 ft·lbf (131 N·m) at 4800 rpm. The later one produced 100 hp (75 kW) at 5600 rpm and 102 ft·lbf (138 N·m) @ 4400 rpm. The version now produced by Xiali produces 100 hp (75 kW) at 6000 rpm and 96 ft·lbf (130 N·m) @ 4400 rpm.

6A

The 1.4 L (1397 cc) 6A-FC was the only 1.4 variant, produced from 1989 through 1992. Output was 82 hp (61 kW) at rpm and 87 ft·lbf (117 N·m) at rpm. Cylinder bore was 76 mm (3 in) and stroke was 77 mm (3.03 in) for this 4-valve DOHC engine.

7A

The largest A-series engine was the 1.8 L (1762 cc) 7A-FE. Produced from 1993 to 1998, it was a 4-valve DOHC narrow-valve-angle economy engine. Cylinder bore was 81 mm (3.19 in) and stroke was 85.5 mm (3.37 in).

An early Canadian version produced 115 hp (86 kW) at 5600 rpm and 110 ft·lbf (149 N·m) at 2800 rpm. The most common version is rated at 115 hp (86 kW) at 5600 rpm and 115 ft·lbf (155 N·m) at 2800 rpm engine.

In the United States, the 7A-FE's most common application was in the 1993–1997 Toyota Corolla (7th generation). The engine was also used in some 1994–1999 Toyota Celicas (6th generation) at the base ST trim level, as well as the Toyota Corolla's clone, the Geo Prizm.

Since the 7A shares the same layout as the 4A it is possible to create a 7A-G(Z)E out of a 7A-FE bottom and a 4A-G(Z)E head and pistons. Since the 7A is a very common engine the upgrade from 4A-G(Z)E to 7A-G(Z)E should be relatively cheap. This is a popular upgrade amongst drifters (mostly AE86 drivers) who are always in need of more torque.

The Indonesian and Russian version of 7A-FE has strongest output, 120 hp (89 kW) at 6000 rpm and 16 kgf·m (157 N·m) at 4400 rpm, with 9.5 compression ratio. It appears in the 8th generation Corolla (AE112).

It is a non-interference type engine.

8A

A 1.3 L (1342 cc) 8A is now produced by Tianjin FAW Xiali for its Daihatsu and Toyota-based subcompacts. It uses the same cylinder bore of 78.7 mm (3.1 in) as the 5A with a reduced stroke of 69 mm (2.7 in) and a 4 valves per cylinder DOHC head.

Output is 86 hp (64 kW) at 6000 rpm and 81 ft·lbf (110 N·m) @ 5200 rpm.

See also

* List of Toyota engines

References

External links

* [http://www.4age.net/ 4AGE.net] —Articles & photos of 4AGE engined vehicles
* [http://www.aeu86.org/index/engine-4age-to-7age-conversion/cat/9/topic=4156/post=60902 "4AGE to 7AGE conversion"] —A good how-to
* [http://www.aeu86.org/index/engine-4a-ge-engine-rebuild-by-rschita/cat/9/topic=4156/post=60939 "4A-GE engine rebuild by RSChita"]
* [http://www.geocities.com/MotorCity/Pit/9975/dataBySubject/EngineCodes.html Toyota engine codes]
* [http://www.toysport.com/Technical%20Information/4ag_tech_notes.htm 4A-GE tech notes]
* [http://shell.deru.com/~sgn1/AW11/4age.htm 4A-GE Overview]
* [http://shell.deru.com/~sgn1/AW11/4agze.htm 4A-GZE Overview]
* [http://www.mr2mk1club.com/engohaul.html 4A-GE Engine Overhaul] —Well documented
* [http://www.billzilla.org/4agstock.htm The Stock 4AGE Description Page]
* [http://www.rollaclub.com/board/index.php?showtopic=14024 "Sam-q's 20v Rwd Cooling System Guide"] —Converting a 20V cooling system to RWD
* [http://home.clear.net.nz/pages/phil.bradshaw/4AGE%20into%20RWD.htm Phil Bradshaw's 4A-GE info page]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Toyota M engine — Infobox Automobile engine name=Toyota M engine manufacturer=Toyota Motor Corporation production=1965 ndash;1993Toyota Motor Corporation s M family of engines were a longitudinally mounted straight 6 engine design. They were used from the 1960s… …   Wikipedia

  • Toyota JZ engine — Infobox Automobile engine name=Toyota JZ engine manufacturer=Toyota Motor Corporation production=1990 ndash;2005 predecessor=Toyota M engine class=inline 6The Toyota JZ engine family is a series of inline 6 automobile engines. A replacement for… …   Wikipedia

  • Toyota ZZ engine — The Toyota ZZ engine family is a straight 4 piston engine series. The ZZ series uses an aluminum engine block and aluminum DOHC 4 valve cylinder heads, a first for Toyota. The valve camshafts are chain driven. The two 1.8 L members of the family …   Wikipedia

  • Toyota VZ engine — Infobox Automobile engine name=Toyota VZ engine manufacturer=Toyota Motor Corporation production=1988 ndash; predecessor=Toyota G engine successor=Toyota MZ engine class=DOHC 60° 24 valve V6 similar=Chrysler LH V6 GM 54° V6 Mazda K engine Nissan… …   Wikipedia

  • Toyota GR engine — Infobox Automobile engine name=Toyota GR engine manufacturer=Toyota Motor Corporation production=2002 ndash; class=DOHC 60° V6 predecessor=Toyota MZ engine Toyota M engine Toyota JZ engine Toyota VZ engine Toyota G engine similar=Chrysler SOHC V6 …   Wikipedia

  • Toyota AZ engine — Infobox Automobile engine name=Toyota AZ engine manufacturer=Toyota Motor Corporation production=2000–presentThe Toyota AZ engine family is a straight 4 piston engine series. The AZ series uses an aluminium engine block with cast iron cylinder… …   Wikipedia

  • Toyota S engine — Infobox Automobile engine name=Toyota S engine manufacturer=Toyota Motor Corporation production=1982 ndash;The Toyota S Series engines are a family of straight 4 engines with displacement from 1.8 L to 2.2 L produced by Toyota Motor Corporation.… …   Wikipedia

  • Toyota E engine — The Toyota E engine family is a straight 4 piston engine series, utilizing a timing belt rather than a chain. Like many of Toyota s other engine designs, the E engine series features a cast iron block, along with an aluminum cylinder head. The… …   Wikipedia

  • Toyota MZ engine — Infobox Automobile engine name=Toyota MZ engine manufacturer=Toyota Motor Corporation production=1994 ndash; class=V6 successor=Toyota GR engineThe Toyota MZ engine family is a V6 piston engine series. The MZ series has an aluminium engine block… …   Wikipedia

  • Toyota T engine — The Toyota T series is a family of inline 4 automobile engines manufactured by Toyota beginning in 1970 and ending in 1985. It started as a Pushrod Overhead Valve (OHV) design and later, performance oriented Dual Overhead Cam (DOHC) variants were …   Wikipedia

  • Toyota UZ engine — Infobox Automobile engine name=Toyota UZ engine manufacturer=Toyota Motor Corporation production=1989 ndash; class=DOHC 90° V8 similar=Jaguar AJ V8 Ford Modular V8 Ford/Yamaha V8 GM Premium V Mercedes Benz M113/M155 BMW M62 BMW N62 Nissan VH… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”