Chinese telegraph code

Chinese telegraph code

The Chinese Telegraph Code, Chinese Telegraphic Code, or Chinese Commercial Code (simplified Chinese: 中文电码; traditional Chinese: 中文電碼; pinyin: Zhōngwén diànmǎ or simplified Chinese: 中文电报码; traditional Chinese: 中文電報碼; pinyin: Zhōngwén diànbàomǎ)[1] is a four-digit decimal code (character encoding) for electrically telegraphing messages written with Chinese characters.

Contents

Encoding and decoding

A codebook is provided for encoding and decoding the Chinese telegraph code. It shows one-to-one correspondence between Chinese characters and four-digit numbers from 0000 to 9999. Chinese characters are arranged and numbered in dictionary order according to their radicals and strokes. Each page of the book shows 100 pairs of a Chinese character and a number in a 10×10 table. The most significant two digits of a code matches the page number, the next digit matches the row number, and the least significant digit matches the column number. For example, the code 0022 for the character (zhōng), meaning “center,” is given in page 00, row 2, column 2 of the codebook, and the code 2429 for the character (wén), meaning “script,” is given in page 24, row 2, column 9. The PRC’s Standard Telegraph Codebook (Ministry of Post and Telecommunications 2002) provides codes for approximately 7,000 Chinese characters.

Senders convert their messages written with Chinese characters to a sequence of digits according to the codebook. For instance, the phrase 中文信息 (Zhōngwén xìnxī), meaning “information in Chinese,” is rendered into the code as 0022 2429 0207 1873. It is transmitted using the Morse code. Receivers decode the Morse code to get a sequence of digits, chop it into an array of quadruplets, and then decode them one by one referring to the book.

Senders may translate their messages into numbers by themselves, or pay a small charge to have them translated by a telegrapher.[2] Chinese expert telegraphers used to remember several thousands of codes of the most frequent use.

The Standard Telegraph Codebook gives alternative three-letter code (AAA, AAB, …) for Chinese characters. It compresses telegram messages and cuts international fees by 25% as compared to the four-digit code.[3] The codebook also defines codes for Zhuyin alphabet, Latin alphabet, Cyrillic alphabet, and various symbols including special symbols for months, days in a month, and hours.

Use

Looking up a character given a number is straightforward: page, row, column. However, looking up a number given a character is more difficult, as it requires analyzing the character. The four corner method was developed in the 1920s to allow people to more easily look up characters by the shape, and remains in use today as a Chinese input method for computers.

History

Viguier’s Chinese telegraph codes from 0001 to 0200 (Viguier 1872). These codes are obsolete and should not be used today.

The first telegraph code for Chinese was brought into use soon after the Great Northern Telegraph Company (大北電報公司 / 大北电报公司 Dàběi Diànbào Gōngsī) introduced telegraphy to China in 1871. Septime Auguste Viguier, a Frenchman and customs officer in Shanghai, published a codebook (Viguier 1872), succeeding Danish astronomer Hans Carl Frederik Christian Schjellerup’s earlier work.

In consideration of the former code’s insufficiency and disorder of characters, Zheng Guanying (鄭 觀應 / 郑 观应 Zhèng Guānyīng) compiled a new codebook in 1881. It remained in effect until the Ministry of Transportation and Communications printed a new book in 1929. In 1933, a supplement was added to the book.

After the establishment of the People’s Republic of China in 1949, the codebook forked into two different versions, due to revisions made in the Mainland China and Taiwan independently from each other. The Mainland version, the Standard Telegraph Codebook, adopted the simplified Chinese characters in 1981.

Application

The Chinese telegraph code can be used for a Chinese input method for computers. Ordinary computer users today hardly master it because it needs a lot of rote memorization. However, the related four corner method, which allows one to look up characters by shape, is used.

The Hong Kong residents’ identification cards have the Chinese telegraph code for the holder’s Chinese name (Immigration Department of Hong Kong 2006). Business forms provided by the government and corporations in Hong Kong often require filling out telegraph codes for Chinese names. The codes help inputting Chinese characters to a computer.

Chinese telegraph code is used extensively in law enforcement investigations worldwide that involve ethnic Chinese subjects where variant phonetic spellings of Chinese names can create confusion. Dialectical differences (Mr. Wu in Mandarin becomes Mr. Ng in Cantonese) and differing romanization systems (Mr. Xiao in the Hanyu pinyin system, and Mr. Hsiao in the Wade Giles system) can create serious problems for investigators, but can be remedied by application of Chinese telegraph code. For instance, investigators following a subject in Taiwan named Hsiao Ai-Kuo might not know this is the same person known in mainland China as Xiao Ai Guo and Hong Kong as Siu Oi-Kwok until codes are checked for the actual Chinese characters to determine all match as CTC: 5618/1947/0948 for 萧爱国.[4]

Chinese telegraph code is also used on occasion in U.S. Immigration documents. For example, the DS-230 form for K1/K2 visa applicants requires the telegraph code of the applicant's name (as of 8 March 2009).

Notes

  1. ^ Simply diànmǎ or diànbàomǎ may refer to the “Chinese telegraph code” whereas diànmǎ is a general term for “code,” as seen in Móěrsī diànmǎ (simplified Chinese: 摩尔斯电码; traditional Chinese: 摩爾斯電碼) for the “Morse code” and Bóduō diànmǎ (simplified Chinese: 博多电码; traditional Chinese: 博多電碼) for the “Baudot code.”
  2. ^ The Tianjin Communications Corporation (2004) in the PRC charges RMB 0.01 per character for their encoding service, compared to their domestic telegraph rate of RMB 0.13 per character.
  3. ^ Domestic telegrams are charged by the number of Chinese characters, not digits or Latin characters, hence this compression technique is only used for international telegrams.
  4. ^ For more information, refer to: A Law Enforcement Sourcebook of Asian Crime and Cultures: Tactics and Mindsets, Author Douglas D. Daye, Chapter 20

References and bibliography

  • Baark, Erik. 1997. Lightning Wires: The Telegraph and China’s Technological Modernization, 1860–1890. Greenwood Press. ISBN 0-313-30011-9.
  • Baark, Erik. 1999. “Wires, codes, and people: The Great Northern Telegraph Company in China.” In China and Denmark: Relations Since 1674, edited by Kjeld Erik Brødsgaard and Mads Kirkebæk, Nordic Institute of Asian Studies, pp. 119–152. ISBN 87-87062-71-2.
  • Immigration Department of Hong Kong. 2006. Card face design of a smart identity card. Hong Kong Special Administrative District Government. Accessed on December 22, 2006.
  • Jacobsen, Kurt. 1997. “Danish watchmaker created the Chinese Morse system.” Morsum Magnificat, 51, pp. 14–19.
  • Lín Jìnyì (林 進益 / 林 进益), editor. 1984. 漢字電報コード変換表 Kanji denpō kōdō henkan hyō [Chinese character telegraph code conversion table] (In Japanese). Tokyo: KDD Engineering & Consulting.
  • Ministry of Post and Telecommunications (中央人民政府郵電部 / 中央人民政府邮电部 Zhōngyāng Rénmín Zhèngfǔ Yóudiànbù), editor. 1952. 標準電碼本 / 标准电码本 Biāozhǔn diànmǎběn [Standard telegraph codebook], 2nd edition (In Chinese). Beijing: Ministry of Post and Telecommunications.
  • Ministry of Post and Telecommunications (中华人民共和国邮电部 Zhōnghuá Rénmín Gònghéguó Yóudiànbù), editor. 2002. 标准电码本 Biāozhǔn diànmǎběn [Standard telegraph codebook], 修订本 xīudìngběn [revised edition] (In Chinese). Beijing: 人民邮电出版社 Rénmín Yóudiàn Chūbǎnshè [People’s Post and Telecommunications Publishing]. ISBN 7-115-04219-5.
  • Reeds, James A. 2004. Chinese telegraph code (CTC). Accessed on December 25, 2006.
  • Shanghai City Local History Office (上海市地方志办公室 Shànghǎi Shì Dìfāngzhì Bàngōngshì). 2004. 专业志: 上海邮电志 Zhūanyèzhì: Shànghǎi yóudìanzhì [Industrial history: Post and communications history in Shanghai] (In Chinese). Accessed on December 22, 2006.
  • Stripp, Alan. 2002. Codebreaker in the Far East. Oxford University Press. ISBN 0-19-280386-7.
  • Tianjin Communications Corporation. 2004. 资费标准: 国内公众电报业务 Zīfèi biāozhǔn: Guónèi gōngzhòng diànbào yèwù [Rate standards: Domestic public telegraph service] (In Chinese). Accessed on December 26, 2006.
  • Viguier, Septime Auguste (威基謁 / 威基谒 Wēijīyè). 1872. 電報新書 / 电报新书 Diànbào xīnshū [New book for the telegraph] (In Chinese). Published in Shanghai.
  • Viguier, Septime Auguste (威基謁 / 威基谒 Wēijīyè) and Dé Míngzài (德 明在). 1871. 電信新法 / 电信新法 Diànxìn xīnfǎ [New method for the telegraph] (In Chinese).
  • Yasuoka Kōichi (安岡 孝一) and Yasuoka Motoko (安岡 素子). 1997. Why is “” included in JIS X 0221? (In Japanese). IPSJ SIG Technical Report, 97-CH-35, pp. 49–54.
  • Yasuoka Kōichi (安岡 孝一) and Yasuoka Motoko (安岡 素子). 2006. 文字符号の歴史: 欧米と日本編 Moji fugō no rekishi: Ōbei to Nippon hen [A history of character codes in Japan, America, and Europe] (In Japanese). Tokyo: 共立出版 Kyōritsu Shuppan ISBN 4-320-12102-3.

See also

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Chinese Character Code for Information Interchange — (中文資訊交換碼) or CCCII is a character set developed specifically to address the problem of interchange of Chinese information. It is used mostly by libraries because the code contains various properties considered to be desirable by libraries. CCCII… …   Wikipedia

  • Telegraph code — A telegraph code is a character encoding used to transmit information through telegraphy machines. The most famous such code is Morse code. Manual telegraph codes Morse code can be transmitted and received with very primitive equipment.It encodes …   Wikipedia

  • Code page — is another term for character encoding. It consists of a table of values that describes the character set for a particular language. The term code page originated from IBM s EBCDIC based mainframe systems,[1] but many vendors use this term… …   Wikipedia

  • Code page 936 — is Microsoft s character encoding for simplified Chinese, one of the four DBCSs for East Asian languages. Originally it was identical to GB 2312, and expanded to cover most part of GBK with the release of Windows 95; now superseded by Code page… …   Wikipedia

  • Code page 850 — character set with 9×16 glyphs, as it usually rendered by VGA Code page 850 (also known as CP 850, IBM 00850,[1] OEM 850,[2] MS DOS Latin 1[3]) is a …   Wikipedia

  • Code page 437 — Code page 437, as rendered by the IBM PC using a VGA adapter. IBM PC or MS DOS code page 437, often abbreviated CP437 and also known as DOS US, OEM US or sometimes misleadingly referred to as the OEM font, High ASCII or Extended ASCII,[1][2] is… …   Wikipedia

  • Code page 855 — (also known as CP 855, IBM 00855,[1] OEM 855,[2] MS DOS Cyrillic[3]) is a code page used under MS DOS to write Cyrillic script. This code page is not used much. Code page layout The following table shows code page 855.[2] …   Wikipedia

  • Code page 866 — (CP 866) is a code page used under MS DOS to write Cyrillic script.[1] It is based on the alternative character set of GOST 19768 87. The code was widely used during MS DOS era because it preserves the pseudographic symbols (unlike Windows 1251)… …   Wikipedia

  • Code page 852 — (also known as CP 852, IBM 00852,[1] OEM 852 (Latin II),[2][3] MS DOS Latin 2[4]) is a code page used under MS DOS to write Central European languages that use Latin script (such as Bosnian, Croatian, Czech, Hungarian …   Wikipedia

  • Code page 865 — (also known as CP 865, IBM 00865,[1] OEM 865, MS DOS Nordic[2]) is a code page used under MS DOS to write Nordic languages (except Icelandic, for which code page 861 is used). Code page 865 differs from code page 437 in three points: 0x9B (‹ø›… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”