Class 4 telephone switch


Class 4 telephone switch

A Class 4, or Tandem, telephone switch is a U.S. telephone company central office telephone exchange used to interconnect local exchange carrier offices for long distance communications in the Public Switched Telephone Network.

A Class 4 switch doesn't connect directly to any telephones; instead, it connects to other Class 4 switches and to Class 5 telephone switches. The telephones of people who subscribe to telephone service are wired to Class 5 switches. When a call is placed to a telephone that isn't on the same Class 5 switch as the subscriber, the call may be routed through one or more Class 4 switches to reach its destination.

Contents

Taxonomy

Tandem derives from the Latin adverb tandem meaning "at length," and is used in English to mean a group of two people or machines working together, usually in series.[1] A "tandem switch" is used to connect two other switches to each other via trunk lines. Thus, trunk switches are always part of a series of switches and lines that connect telephone callers to each other.

Sector and access tandems

A sector tandem switch connects local telephone exchanges (Class 5 switches) and carries traffic within the local access and transport area (LATA).

An access tandem switch connects local telephone exchanges to long-distance telephone companies (or interexchange carriers, "IXCs"). The point at which an access tandem connects to the IXC's switch is called the point of presence, or POP.

Modern tandem switches are often located at the center of the areas they serve, and may act as both sector tandems and access tandems.

History

Before the Bell System divestiture, Class 4 switches in a telephone office that had operators present were called "toll centers;" if no operators were present, they were called "toll points." Either type of Class 4 switch might be referred to as a "toll switch." These terms were used because long-distance, or "toll," calls had to pass through Class 4 switches, where the billing for the calls would be handled.

Class 4 switches at that time often had an associated Traffic Service Position System (TSPS) to handle operator-assisted calls. TSPS automated many functions previously handled by the local operator with a "cordboard" telephone switch, such as certain aspects of coin-operated telephone calls. It also allowed the telephone company to route operator calls to remote locations, rather than requiring operators at each switch.[2]

After the divestiture, as human operators became less common, the terms changed. Today, a Class 4 switch that connects Class 5 switches to the long-distance network is called an "access tandem." A Class 4 switch that connects Class 5 switches to each other, but not to the long-distance network, is called a "local tandem."

The majority of Class 4 switches in the Bell System during the 1950s and 1960s used crossbar switches, such as the Crossbar Tandem (XBT) variant of the Number One Crossbar Switching System, or 1XB switch. The Number 4 Crossbar ("4XB") Tandem switch was used in the North American toll network from 1943 until the 1990s, when it was replaced by more modern digital switching equipment, such as the Lucent 4ESS switch or the Nortel DMS-200.[3] The last 4XB switch in the United States was installed in 1976.[4]

During the 1980s, Class 4 tandem switches were converted to deal only with high-speed digital four-wire circuit connections: T1, T3, OC-3, etc. The two-wire local line connections to individual telephones were relegated to the Class 5 switches. By the dawn of the 21st century, almost all other switches also supported four-wire connections.

Modern tandem switches, like other classes of telephone switch, are digital, and use time-division multiplexing (TDM) to carry circuit-switched telephone calls. Tandems were more quickly converted to TDM than the Class 5 end-offices were. During the transition to digital switching in the 1980s and 1990s, when both TDM and traditional "space division"[nb 1] switches were in use, American phone company employees often referred tandems as "TDM switches" as a result.

In the past, most of the accounting, billing management, and call record-keeping was handled by the tandem switches. During the last third of the 20th century, these tasks were performed by the Class 5 end-office switches.

Switching equipment

  • The Lucent 4ESS is a digital switch widely used as a Class 4 switch in the United States. It was developed by AT&T's Western Electric division, before that division was spun off as Lucent. The first 4ESS was installed in Chicago in 1976. The last 4ESS in the AT&T Long Lines network was installed in 1999.[4]
  • The Lucent 5ESS, a Class 5 switching system, is sometimes used as a Class 4 switch (or as a mixed Class 4/5 switch) in markets that are too small to justify a 4ESS switch.
  • The Nortel DMS-250, a larger variant of the DMS-100, is a popular competitor to Lucent's 4ESS, especially among telephone companies that were not previously a part of AT&T. Other DMS switches can also be used as tandems.
  • The Nortel SP1 4-Wire was an early electronic switch used as a Class 4 switch.[5]

Other Class 5 digital switches are often used as Class 4 switches for smaller applications.

See also

Footnotes

  1. ^ "Space division" is a retronym used to distinguish traditional telephone trunk lines—where a call would fully occupy a set of wires within a "trunk," or bundle of wires, between switches—from the new TDM trunks, where more than one call could be placed on a pair of wires by digitizing the call and sending the data for each call in pre-defined "timeslots" assigned to the call.

References

  1. ^ The New Oxford American Dictionary (Mac OS X 10.6 Dictionary ed.). tandem. "ORIGIN late 18th cent.: humorously from Latin, literally ‘at length.’" 
  2. ^ Farley, Tom. "TSPS History". privateline.com. http://www.privateline.com/circuits/TSPS_history.htm. Retrieved August 23, 2010. 
  3. ^ Cuccia, Mark (December 20, 2008). "History of the Number 4 Crossbar (#4XB) Tandem Switch & listing of former #4XB switches". Telephone World. http://www.phworld.org/switch/4xb.htm. Retrieved August 24, 2010. 
  4. ^ a b "Telephone Switch Timeline". Telephone World. December 20, 2008. http://www.phworld.org/switch/timeline.htm. Retrieved August 24, 2010. 
  5. ^ "Nortel (Northern Telecom) Modern Telephone Systems". Telephone World. December 20, 2008. http://www.phworld.org/switch/ntess.htm. Retrieved August 24, 2010. 

Further reading

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Switch - получить на Академике активный купон Tmart или выгодно switch купить по низкой цене на распродаже в Tmart

  • Class 5 telephone switch — A Class 5 telephone switch is a telephone switch or telephone exchange in the Public Switched Telephone Network located at the local telephone company s central office, directly serving subscribers. Class 5 switch services include basic dial tone …   Wikipedia

  • Class 5 telephone switches — A Class 5 switch, in United States telephony jargon, refers to a telephone switch or exchange located at the local telephone company s central office, directly serving subscribers. Class 5 switch services include basic dial tone, calling features …   Wikipedia

  • Class 4 — may refer to: Speed Class Rating, the official unit of speed measurement for SD Cards British Rail Class 04, a British diesel shunting locomotive Class 4 telephone switch Class IV (U.S. Army), Construction materials, to include installed… …   Wikipedia

  • Class 5 — may refer to: British Rail Class 05 Class 5 telephone switch NSB Class 5, a standard gauge steam locomotive of Norway NSB Class V, a narrow gauge steam locomotive of Norway Class V (U.S. Army), Ammunition of all types (including chemical,… …   Wikipedia

  • Telephone exchange — A telephone operator manually connecting calls with cord pairs at a telephone switchboard. In the field of telecommunications, a telephone exchange or telephone switch is a system of electronic components that connects telephone calls. A central… …   Wikipedia

  • telephone — telephoner, n. /tel euh fohn /, n., v., telephoned, telephoning. n. 1. an apparatus, system, or process for transmission of sound or speech to a distant point, esp. by an electric device. v.t. 2. to speak to or summon (a person) by telephone. 3.… …   Universalium

  • Class of service — Contents 1 Class of service (CoS) 2 Classification of service 3 Class of service (COS) 4 References 5 …   Wikipedia

  • Switch — For other uses, see Switch (disambiguation). Electrical switches. Top, left to right: circuit breaker, mercury switch, wafer switch, DIP switch, surface mount switch, reed switch. Bottom, left to right: wall switch (U.S. style), miniature toggle… …   Wikipedia

  • 5ESS switch — The 5ESS Switch is the Class 5 telephone electronic switching system sold by Alcatel Lucent. This digital central office telephone circuit switching system is used by many telecommunications service providers. HistoryThe 5ESS Class 5 Switch first …   Wikipedia

  • Independent telephone company — An Independent telephone company in the United States was a telephone company providing local service which was not part of the Bell system group of companies, Ma Bell , before the 1984 Bell System divestiture or breakup of the Bell system. They… …   Wikipedia