Viral processing


Viral processing

The main idea behind viral processing is to stop the viruses in a given sample from infecting the desired product. The two most widely used methods of viral processing are "viral removal" and "viral inactivation". The former is a method in which all viruses are simply removed from the sample completely. The latter method is one in which the viruses may remain in the final product, but in a non-infective form. These techniques are used widely in the food and blood plasma industries, as those products can be harmed by the presence of viral particles. Some of the more common viruses removed by these methods are the HIV-1 and HIV-2 viruses; hepatitis A, B, and C; and parvoviruses. The methods used in the plasma industry have been summarized (Horowitz B., Minor P., Morgenthaler J. J., Burnouf T., McIntosh R., Padilla A., Thorpe R. and van Aken W. G. Who Expert Committee on Biological Standardization. World Health Organ Tech Rep Ser. 924: 1-232, 2004.) In some cases, however, it is the virus "itself" that is the desired product, as is often the case with the HIV. In many cases, researchers may be trying to extract the viruses from the blood for study, not specifically for blood purification. It is also common to use these types of techniques to remove particles produced as a result of viral infection.

Virus removal

This overarching process, which has come to be known simply as virus removal, is one in which all of the viruses in a given sample are removed by traditional extraction or filtration methods. Some of the more prominent methods include:
* Nanofiltration
*ChromatographyThese extraction processes are considered "traditional processes" because they do not chemically affect the virus in any way; they simply remove it physically from the sample.

Nanofiltration

Virus removal processes using nanofiltration techniques [http://www.eurodia.com/html/nab.html] remove viruses specifically by size exclusion. This type of process is typically used for parvoviruses [http://www.virology.net/Big_Virology/BVDNAparvo.html] and other viruses containing a protein coat. A typical HIV virion is 180 nm and a typical parvovirus can vary between 15 and 24 nm, which is very small. One great advantage of filtration, as opposed to methods involving extremes of temperature or acidity, is that filtration will not denature the proteins in the sample. Nanofiltration is also effective for most types of proteins. Since it is not chemically selective, no matter what the surface chemistry of the viral particle is, viral removal processes using nanofiltration techniques will still be effective. Another great advantage of this technique is its ability to be performed on a lab scale and then effectively scaled up to production standards. It is important to consider, however, the fact that the level of removal of the viruses is dependent on the size of the pores of the nanofilter. In some cases, very small viruses will not be filtered out. It is also necessary to consider the possible effects of pressure and flow rate variation.

Some of the filters used for to perform these types of processes are Planova 15 [http://www.asahi-kasei.co.jp/planova/en/product/filters.html] , VAG - 300 , Viresolve 180 [http://www.millipore.com/catalogue.nsf/docs/VPVH20CN1] , and Viresolve 70TM.

Chromatography

Chromatographic methods of removing viruses are great for purifying the protein and are also effective against all types of viruses, but the level of virus removal is dependent on the column composition and the reagents that are used in the process. It is also worthy to note that the effectiveness of this process can vary greatly between viruses and that the efficiency of the process can change based on the buffer that is used. Sanitation between batches is also a concern when performing this procedure.

Viral inactivation

Viral inactivation renders viruses "inactive", or unable to infect. Many viruses contain lipid or protein coats that can be inactivated by chemical alteration. Viral inactivation is different from viral removal because, in the former process, the surface chemistry of the virus is altered and in many cases the (now non-infective) viral particles remain in the final product. Rather than simply rendering the virus inactive, some viral inactivation processes actually denature the virus completely. Viral inactivation is used widely in the blood plasma industry.

In order to achieve inactivation of the viruses in the sample, it is necessary to perform "special" purification processes that will chemically alter the virus in some way. Some of the more widely used processes are as follows:
*Solvent/detergent inactivation
*Pasteurization (heating)
*Acidic pH inactivation

In some cases viral inactivation is not a viable removal alternative because even the denatured or otherwise inactivated viral particles can have deleterious affects on the process stream or the product itself.

olvent/detergent (S/D) inactivation

This process, developed by the New York Blood Center [http://www.nybloodcenter.org/index.jsp] , is the most widely used viral inactivation method to date. It is predominantly used in the blood plasma industry, by over 50 organizations worldwide and by the American Red Cross [http://www.redcross.org/] . This process is only effective for viruses enveloped in a lipid coat, however. The detergents used in this method interrupt the interactions between the molecules in the virus's lipid coating. Most enveloped viruses cannot live without their lipid coating, so they die when exposed to these detergents. Other viruses may still live, but they are unable to reproduce, rendering them non-infective. The solvent creates an environment in which the aggregation reaction between the lipid coat and the detergent happen more rapidly. The detergent typically used is Triton-X 100.

This process has many of the advantages of the "traditional" removal techniques. This process does not denature proteins, because the detergents only affect lipids and lipid derivatives. There is a 100% viral death achieved by this process and the equipment is relatively simple and easy to use. Equipment designed to purify post-virus inactivated material would be necessary to guard against contamination of subsequent process streams.

S/D treatment utilizes readily available and relatively inexpensive reagents, but these reagents must be removed from the product prior to distribution which would require extra process steps. Because this process removes/inactivates the lipid coating of a virus, viruses without any sort of lipid envelope will be unaffected. There is also no inactivation effect by the buffers used in this process.

Pasteurization

Inactivation of viruses by means of pasteurization can be very effective if the proteins that you are trying to protect are more thermally resistant than the viral impurities with which they are in solution. Some of the more prominent advantages of these types of processes are that they require simple equipment and they are effective for both enveloped "and" non-enveloped viruses. Because pasteurization involves increasing the temperature of solution to a value that will sufficiently denature the virus, it does not matter whether the virus has an envelope or not because the envelope alone cannot protect the virus from such high temperatures. However, there are some proteins which have been found to act as thermal stabilizers for viruses. Of course, if the target protein is not heat-resistant, using this technique could denature that target protein as well as the viral impurity. Typical incubation lasts for 10 hours and is performed at 60°C.

Acidic pH inactivation

Some viruses, when exposed to a low pH, will denature spontaneously. Similar to pasteurization, this technique for viral inactivation is useful if the target protein is more resistant to low pHs than the viral impurity. This technique is effective against enveloped viruses, and the equipment typically used is simple and easy to operate. This type of inactivation method is not as effective for non-enveloped viruses however, and also requires elevated temperatures. So in order to use this method, the target protein must be resistant to low pHs and high temperatures which is unfortunately not the case for many biological proteins. Incubation for this process typically occurs at a pH of 4 and lasts anywhere between 6 hours and 21 days.

piking studies

In many cases, the concentration of viruses in a given sample is extremely low. In other extraction processes, low levels of impurity may be negligible, but because viruses are "infective" impurities, even one viral particle may be enough to ruin an entire process chain. It is for this reason that special measures must be taken to determine the appropriate removal or inactivation method for whatever type of virus is being extracted from whatever type of solution.

Spiking studies were created specifically for this purpose. A spiking study is a study done in order to determine the possible methods of viral removal or inactivation. The results of these studies are numerical and, based on these numbers, researchers can determine whether or not the process on which the study was conducted will be suitable for the viruses they are trying to extract and the solution from which they are trying to extract them.

The method

It has been shown through experimentation, that increasing the viral count (or level of activity) of a sample by a factor of 104 or 105 of the original will only change the virus removal/inactivation ratios by one order of magnitude. From this knowledge, spiking studies have been created in which the virus number (or level of activation) is increased or "spiked" by a factor of 104 or 105 of the original sample. This new high number or level of activity is then run through the process stream and purified. The number or level of activity is taken at the beginning and at the end of the process stream and the ratio of these two values is calculated. This value is used to determine the reduction factor of the process using the following equation:

Ri = -log(Yi) ± 1

where Ri is the reduction factor, Yi is the ratio of beginning viral count/activity to ending viral count/activity and the plus or minus 1 is a correction factor for the one order of magnitude error in the calculation.

Reduction factor

The reduction factor is defined as the negative log of the ratio of the beginning viral number to the ending viral number plus or minus one, and is used as an indicator as to whether or not a specific process is appropriate for the processing of a certain virus under certain conditions. The reduction factor needed for a certain process stream is dependent on many different factors, some of which include:
* The expected initial concentration of virus
* The product being purified
* The infective dose of the virus (for "in vivo" usage)
* Whether inactivation is a viable alternative to complete removal
* The capabilities of the laboratory
* The relative difficulty of the inactivation or removal method

Applications

This technology has been used extensively in the food and drug industries, but some other applications of viral processing have been:
* Air purification (Millipore) [http://www.millipore.com/bibliography.nsf/docs/rp0003en00]
* Vaccines
* Viral sample extraction
* Water purification
* West Nile Virus inactivation

References

*Protein Purification Applications, ed. Simon Roe, Oxford University Press 2001: article by Terry Cartwright, AEA Tech, Oxford UK
*Handbook of Process Chromatography, G. Sofer and J. Hagel, chapter on Validation
*Blood Fractionation in ECT, Publication of New York Blood Center
*http://www.eurodia.com/html/nab.html
*http://www.virology.net/Big_Virology/BVDNAparvo.html
*http://www.pharmcast.com/Patents100/Yr2006/Nov2006/112106/7138120_Immunoglob112106.htm
*http://www.asahi-kasei.co.jp/planova/en/product/filters.html


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Viral replication — is the term used by virologists to describe the formation of biological viruses during the infection process in the target host cells. Viruses must first get into the cell before viral replication can occur. From the perspective of the virus, the …   Wikipedia

  • Social information processing — According to the introductory set of slides [AAAI, [http://www.isi.edu/ lerman/sss07/ Social Information Processing] , AAAI Spring Symposium, Stanford University, March 2008] for the AAAI Social Information Processing symposium, Social… …   Wikipedia

  • Chromatography in blood processing — Chromatographic techniques have been used in blood processing and purification since the 1980s. It has emerged as an effective method of purifying blood components for therapeutic use. Contents 1 Human blood plasma 2 Development of chromatography …   Wikipedia

  • Antigen processing — is a biological process that prepares antigens for presentation to special cells of the immune system called T lymphocytes. This process involves two distinct pathways for processing of antigens from an organism s own (self) proteins or… …   Wikipedia

  • Discovery and development of integrase inhibitors — The first human immunodeficiency virus (HIV) case was reported in the 1980s. Many drugs have been discovered to treat the disease but mutations in the virus and resistance to the drugs make development difficult. Integrase is a viral enzyme that… …   Wikipedia

  • Herpes simplex virus — This article is about the virus. For information about the disease caused by the virus, see Herpes simplex. Herpes simplex virus TEM micrograph of a herpes simplex virus …   Wikipedia

  • RNA interference — (RNAi) is a mechanism that inhibits gene expression at the stage of translation or by hindering the transcription of specific genes. RNAi targets include RNA from viruses and transposons (significant for some forms of innate immune response), and …   Wikipedia

  • Life Sciences — ▪ 2009 Introduction Zoology       In 2008 several zoological studies provided new insights into how species life history traits (such as the timing of reproduction or the length of life of adult individuals) are derived in part as responses to… …   Universalium

  • MicroRNA — The stem loop secondary structure of a pre microRNA from Brassica oleracea. A microRNA (abbreviated miRNA) is a short ribonucleic acid (RNA) molecule found in eukaryotic cells. A microRNA molecule has very few nucleotides (an average of 22)… …   Wikipedia

  • Virus — This article is about the biological agent. For other uses, see Virus (disambiguation). For a generally accessible and less technical introduction to the topic, see Introduction to viruses. Viruses …   Wikipedia