- Ship model
- This article is concerned primarily with static models. For operating models see model yachting or radio-controlled boat,
Ship modeling is a craft as old as shipbuilding itself, stretching back to ancient times when water transport was first developed.
- 1 History
- 2 Types of ship model construction
- 3 Wargaming models
- 4 Large Scale Models
- 5 Engineering models
- 6 Manned models
- 7 Model yachts
- 8 Model shipwright guilds
- 9 See also
- 10 References
- 11 External links
Ship and Boat Models from the Ancient Mediterranean
Ancient ship and boat models have been discovered throughout the Mediterranean, especially from ancient Greece, Egypt, and Phoenicia. These models provide archaeologists with valuable information regarding seafaring technology and the sociological and economic importance of seafaring. In spite of how helpful ancient boat and ship models are to archaeologists, they are not always easily or correctly interpreted due to artists’ mistakes, ambiguity in the model design, and wear and tear over the centuries.
In the Ancient world, ships “were among the most technologically complex mechanisms of the ancient world.” Ships made far-flung travel and trade more comfortable and economical, and they added a whole new facet to warfare. Thus, ships carried a great deal of significance to the people of the ancient world, and this is expressed partly through the creation of boat and ship models. Ancient boat and ship models are made of a variety of materials and are intended for different purposes. The most common purposes for boat and ship models include burial votives, house hold articles, art, and toys. While archaeologists have found ship and boat models from societies all around the Mediterranean, the three of the most prolific ship model building cultures were the Greeks, Phoenicians, and Egyptians.
Archaeologists have determined that Ancient Greek ship models were used as burial or votive offerings and as household articles such as lamps or drinking vessels. The kinds of ships depicted in Ancient Greek models can be classified broadly as small craft, merchant vessels, and warships. Models were cast in different materials, including wood, bronze, lead, and clay.
Greek warships were popular subjects to be made in miniature. One particular model, acquired by the Staatliche Museum in Kassel, Germany, proves to be helpful to archaeologists and historians in understanding what a hemiolia warship was like. Archaeologists have tentatively dated the Kassel model to be from the 6th or 5th centuries BC through iconographic and literary sources. This ship model is made of clay and features a distinctive prow shaped like a boar’s head that is described by Herodotus in History, and depicted on pottery, coins seals and drinking cups. The model is a miniature of a vessel that would have been too small to be a typical warship. The presence of holes bored into 8 thwarts in the ship suggests that the thwarts may have been seats for a pegged-in dummy crew. If the holes bored into the thwarts are indeed meant to accommodate a dummy crew, the crew seating would have been arranged with two men per bench amidships, and one man per bench fore and aft where the ship narrows so that there is only room for one man. Alec Tilley suggests that a small ship with this type of seating arrangement would have been called a hemiolia, or a one-and-a-halfer. The name indicates that two oarsmen would have been seated on half of the benches and one on the others. Until this ship model was discovered, archaeologists, classicists, and historians had only been able to hypothesize on what the seating arrangement might have been like on a hemiolia based on its name.
All ancient Greek ship models are not of warships. One boat model from a house deposit in Mochlos, Crete, dating to around 3000BC, is thought to be too small to be a war ship. Basch postulates that the boat “cannot have been propelled by more than four oarsmen … so it can hardly be other than a fishing boat.” As opposed to other Early Bronze Age ship and boat models, this model was not found in a burial context. This model is thought to be a child’s toy or a piece of art, instead of a burial offering. The model itself features a projection of the keel beyond the stem-post at both ends. Despite appearances, these projections are not rams. Because the model is depicting a fishing boat, there would be no need for rams. This model in particular has helped archaeologists understand that not all keel projections in depictions of boats during this time are necessarily rams. Instead, keel projections on depictions of Bronze Age ships are explained as cut-waters or as beaching protection.
Phoenician ship models also provide archaeologists information regarding the technical aspects of seafaring, and the cultural importance of seafaring for the ancient Phoenicians. However, some models offer tantalizing pieces of information that are, unfortunately, difficult to interpret. Item number H-3134 at the Hecht Museum, a dark brown clay model of a 5th century BCE oared boat, is one such craft. The vessel is unprovenienced, save for the reported location of its discovery off the Phoenician coast, but scientists have been able to tentatively confirm the origin and authenticity of this model. The model is of an oared boat manned by three pairs of oarsmen, who are rendered with “hands … raised to their chests, in the last instant of pulling the oar in the water, before lifting it for the recovery.” The mystery of this model is the purpose of small holes- three on the starboard side, and four on port- that were made in the sides of the ship with a sharp tool before the clay dried. It is believed that the holes are too small to pass an oar through, and thus would not be used for rowing purposes. This is hard to prove, however, because the poorly preserved state of the model and the amount of fouling that is layered on the model makes it difficult to definitively rule out this possibility. Another theory regarding the purpose of these holes suggests that “ropes for holding oars were threaded through these holes.”
Ship models are helpful to archaeologists in that they allow archaeologists to make estimates regarding the size the vessel would be in real life. While this technique makes the assumption that artists scaled the models appropriately, it is useful to get some sense of how large these ships and boats may have been in real life. Archaeologists estimate the Phoenician vessel above (H-3134) to be about 6 meters long and the beam about 2 meters. Archaeologists are able to calculate these estimates of size by employing a series of assumptions about the distance between benches, the lateral distance between rowers, and a maximum draft of the vessel.
Egyptian ship and boat models are perhaps some of the most enchanting and well-preserved types of ship models available to archaeologists. Some small models made from ivory, wood, or clay exist, and archaeologists believe these models were actually children’s toys. This is fairly rare, however, because ancient Egyptian ship and boat models more often were placed in tombs of prominent people as “magical substitutes for the actual objects which the deceased has used in life and which he expected to use again in the next world.”
Boats placed in tombs of Egyptian royalty can be separated into two types: boat models that represent actual vessels used on the Nile, and boat models that represent boats that are considered necessary for religious purposes. The second type of model may or may not have been used in real life, but were purely magical boats. The majority of boats found in tombs are carved from wood.
Several boat and ship models were found in the tomb of Tutankhamen, dating to the Sixth Dynasty, and at Meketra (2061-2010BC). The wide variety of vessels depicted by the models in these two tombs has provided archaeologists new information on the types of boats that were used in Egypt. Moreover, the presence of boat and ship models in the tombs attests to the paramount importance of boats and ships to the Nile-going people of Egypt.
The boat models discovered at Meketre feature several different kinds of boats, including traveling boats, sporting boats, and several papyriform crafts. Two of the papyriform skiffs have a trawling net slung between them. It is uncertain whether or not the net is meant to be depicted as being under the water or being pulled out of the water by the fishermen. In the event that the artist meant for the net to be in the water, it is interesting to note that the net is upside down. Needless to say, the upside down net would not work for catching fish. This ambiguity points up the question of artistic veracity of the craftsmen who make ship models. As is attested by the ambiguity of the holes in the sides of the Phoenician model, and the skiff from Meketre, archaeologists need to be aware of the possibility of artistic error while interpreting ancient ship models. While a mistake involving an inverted trawling net may seem trivial, the lesson is important. It is important for archaeologists to be aware of the possibility that ancient artists may not have been familiar with the finer details of ships and boats.
Despite some of the limitations of interpreting ancient Mediterranean ship models, archaeologists have been able to glean a great deal of information from these items. This information has been instrumental in filling in gaps in knowledge about ancient seafaring technology and culture.
Some of the oldest surviving European ship models have been those of early craft such as galleys, galleons, and possibly carracks, dating from the 12th through the 15th centuries and found occasionally mounted in churches, where they were used in ceremonies to bless ships and those who sailed in them, or as votive offerings for successful voyages or surviving peril at sea, a practice which remained common in Catholic countries until the 19th century.
Until the early 18th century, virtually all European small craft and many larger vessels were built without formal plans being drawn. Shipwrights would construct models to show prospective customers how the full size ship would appear and to illustrate advanced building techniques. These were also useful for marine artists, and it is clear that from Dutch Golden Age Painting onwards extensive use of models was made by artists.
Ship models constructed for the Royal Navy were referred to as Admiralty models and were principally constructed during the 18th and 19th centuries to depict proposed warship design. Although many of these models did not illustrate the actual timbering or framing, they did show the form of the hull and usually had great detail of the deck furnishings, masts, spars, and general configuration. Some of these grand models were decorated with carvings of great beauty and were evidently constructed by teams of artisans.
Admiralty models served to educate civilians who were involved in the financing or some other aspect of the ship, to avoid construction errors that might have evolved as the ship itself took form.
During the Napoleonic wars French and English seamen who were taken prisoner were confined, sometimes for many years, and in their boredom sought relief by building ship models from scraps of wood and bone. This evolved into something of an art form and the models were sold to the public, which responded by supplying the prisoners with ivory so that the models would be more decorative. For the most part, the models had carved wooden hulls with rigging made from human hair, horsehair, silk, or whatever other fine material could be obtained. Bone or ivory would be used for masts and spars, and as a thin veneer over the hull.
A consequence of Britain's naval supremacy in the eighteenth and nineteenth centuries was wide public interest in ships and ship models. Numerous fairly crude models were built as children's toys leading to the creation of functional, as opposed to decorative, ship models. Britain also led the world in model ship sailing clubs - in 1838 the Serpentine Sailing Society was started in Hyde Park, followed by the first London Model Yacht Club in 1845. By the 1880s there were three model sailing clubs sharing the Kensington Gardens Round Pond alone.
In the early part of the 20th Century, amateur ship model kits became available from companies such as Bassett-Lowke in Great Britain and Boucher's in the United States. Early 20th century models comprised a combination of wooden hulls and cast lead for anchors, deadeyes, and rigging blocks. These materials gradually gave way to plastic precast sets.
The development of tinplate and improvements in machine tools enabled significant advances in ship modelling from 1900 onwards. Thin, workable sheets of iron could be coated with tin to prevent rusting, then mass-produced as parts of ship model kits. The process was pioneered by French ship model manufacturer Radiguet, which produced a line of zinc boats with pressurised steam engines, wooden decking and brass fittings. The speed of production for tinplate vessels enabled one 1909 manufacturer to produce ship models of speedboats that had competed that year in Monaco.
Ship modelling in the United States experienced a boom in the 1930s when Popular Science magazine published an extended series of articles and plans for famous ships by modeller and former Navy officer E. Armitage McCann.
In recent years, widespread internet access has played a major role in promoting ship modelling, offering enthusiasts the opportunity to show off their work and share techniques. Internet sites such as Modelwarships.com, Steelnavy.com, or Model Shipwrights are oriented to plastic model ship builders, while others such as Hyperscale focus largely on aircraft or other subjects can regularly feature plastic ship models as well.
Types of ship model construction
The most common materials used for ship models are:
- Wood—commonly solid wood, two pieces of wood with a vertical seam or slabs of wood placed one on top of each other.
- Plastic—including both injected styrene and cast resin models. In larger scales (1/192 and larger), fiberglass is often used for hull shells.
- Metal—usually cast lead or other alloys. Steel, sheet tin and aluminum brass are used less frequently for hull construction, but are used extensively for adding details.
- Paper—preprinted paper construction kits are common in Europe, and are available in a variety of scales.
Wooden model ships
Wooden ship model hulls can be constructed in several ways. The simplest is a solid wood hull sawn and carved from a single block of wood. This method requires the greatest skill to achieve accurate results.
A variant of this technique, sometimes known as bread and butter construction( the wood is the "bread" and glue the "butter") is a hull built up from thin blocks of wood glued together with either a vertical seam which can be incorporated into deck design, or a horizontal seam. This reduces the amount of carving required, but still requires skill and the use of templates to achieve and accurate hull form.
Modelling precision and lightweight design can be achieved by creating a hollow hull. The plank on bulkhead technique inserts a series of shaped bulkheads along the keel to form a shaped stage which will be covered with planks to form the hull of the model . Plank on frame designs build the model just as the full size wooden ship is constructed. The keel is laid down in a manner which keeps it straight and true. The sternpost and stem are erected, deadwood and strengthening pieces inserted, and a series of shaped frames are built and erected along the keel to form the internal framework of the model. The planks are then applied over the frame to form the external covering.
A wooden hull can be used for operating models if properly sealed.
Plastic model ships
In the decades since World War Two injection-molded polystyrene plastic model ships have become increasingly popular. Consisting of preformed plastic parts which can be bonded together with plastic cement, these models are much simpler to construct than the more labor-intensive traditional wooden models. The inexpensive plastic kits were initially targeted to the post war generation who could glue them together and produce passable replicas in a single afternoon. Plastic models are available in both full hull and waterline versions for a wide variety of vessels.
A more recent addition has been a variety of kits in cold cure resin marketed by various small companies as part of a cottage industry. These often cover more obscure subjects than mainstream manufacturers.
Scales vary as well, with many kits from the early days being "box scale"; that is, scaled to fit into a uniform sized box designed to fit conveniently on hobby shop shelves. Scales have since become more standardized to enable modelers to construct consistent scale collections, but there are still many to choose from. In Europe 1/400 scale remains popular, while in the United States and Japan the most popular scales are 1/700 (making a World War Two aircraft carrier about a foot long) and 1/350 (twice as long as 1/700). Nevertheless, mainstream plastic kit manufacturers continue to produce kits as small as 1/1200 and as large as 1/72, with a few even larger.
The early plastic model kit producers such as Airfix, Revell, Frog and Pyro have since been joined by Imai, Tamiya, Hasegawa, Skywave/Pit-Road, Trumpeter, Dragon Model Limited and many others in producing a wide array of model subjects. The plastic model kit market has shifted over the years to a focus on adult hobbyists willing to pay for more elaborate, higher quality kits.
Another recent development has been the advent of aftermarket parts to enhance the basic kits. Decals, specialized paints and turned metal replacement gun barrels are available to make plastic models more accurate. The introduction of flat photoetched metal sets, usually stainless steel or brass, also provide much more realistic lifelines, cranes, and other details than are possible with the injection molded plastic kits. These photoetch sets have transformed the hobby, enabling the finescale modeler to reproduce very delicate details with much less effort.
Model ships have been used for war gaming since antiquity, but the introduction of elaborate rules made the practice more popular in the early 20th Century. Small miniature ships, often in 1:1200 scale and 1:1250 scale were maneuvered on large playing surfaces to either recreate a historical battle, or in the case of governments, plan for future encounters. These models were basic representations of ship types, with enough detail to make them recognizable. Bassett-Lowke marketed these to the public in England, along with more detailed versions that appealed to collectors.
Large Scale Models
Larger ship models have been used in museums to document historical ships, in companies for decoration and public relations. These are typically built by commercial firms, or, in the past, model departments of large shipyards. One famous builder of ship models for the United States Navy was the firm of Gibbs and Cox.;a 1/48 scale model of the USS Missouri, which is on display at the Washington Navy Yard museum, required an estimated 77,000 man hours to construct. Commercial ship models are usually built to rigorous standards; for example the US Navy has an exacting set of specifications regarding the use of materials and methods with the aim of ensuring a model "lifespan" of one hundred years.
Radio Control Model Ships
Some hobbyists build and operate scale model ships utilizing radio control equipment. These can range from small models that can be operated in aquariums to vessels capable of navigating large bodies of water. Further expanding the concept is model warship combat, in which scale models fire projectiles at each other in combat.
Model ships are important in the field of engineering, where analytical modeling of a new design needs to be verified. Principals of similitude are used to apply measured data from a scaled model to the full scale design. Models are often tested in special facilities known as model basins.
Manned models are model ships that can carry and be handled by at least one person on an open expanse of water. They must behave just like real ships, giving the shiphandler the same sensations. Physical conditions such as wind, currents, waves, water depths, channels and berths must be reproduced realistically.
Manned models are used for research (e.g. ship behaviour), engineering (e.g. port layout) and for training in shiphandling (e.g. maritime pilots, masters and officers). They are usually at 1:25 scale.
The aim of training on manned models is to enable seamen to acquire or to develop manoeuvring skills through a better understanding of a ship’s behaviour as it sails in restricted water conditions at manoeuvring speed. Manned models are considered by maritime pilots as the next best thing to a full-scale prototype for understanding a ship's behaviour. Those who have trained on both claim that scale models are complementary to computer simulators. While manoeuvres with currents, waves, tugs, anchors, bank effects, etc. are reproduced more accurately on scale models, numerical simulators are more realistic when it comes to the bridge environment.
The Port Revel Shiphandling Training Centre is a French maritime pilotage school specializing in training for pilots, masters, and officers on large ships like supertankers, container ships, LNG carriers and cruise ships . The facility uses manned models at a 1:25 scale on a man-made lake designed to simulate natural conditions in harbours, canals, and open seas. It was the first such facility in the world. The Centre was originally created in 1967 near Grenoble by Laboratoire Dauphinois d'Hydraulique.
Model yachts are operating craft, which may be sail, steam, engine or electric motor powered, typically resembling pleasure power craft, although the hobby also includes the construction and operation of models of working ships such as tugboats and other craft shown in this article as static models.
Model shipwright guilds
Model shipwright guilds are social groupings intended to allow more experienced ship modellers the opportunity to pass on their knowledge to new members; to allow members of all levels of expertise to exchange new ideas, as well as serving as social function.
Some model shipwright guilds have been incorporated into government and Naval facilities, achieving a semi-official status as a clearinghouse for information on naval history and ship design. The USS Constitution Museum operates a model shipwright guild from the Charlestown Navy Yard, adjacent to the berth for the vessel itself.
- ^ "HMS Invincible Model". The Invergordon Naval Museum and Heritage Centre. December 2007. http://www.invergordonnavalmuseum.co.uk/news.htm. Retrieved 2007-12-05.
- ^ Johnston, P.F. 1985. Ship and Boat Models from Ancient Greece. Annapolis, MD: Naval Institute Press P129.
- ^ Johnston, P.F. 1985. Ship and Boat Models from Ancient Greece. Annapolis, MD: Naval Institute Press P.127.</
- ^ Johnston, P.F. 1985. Ship and Boat Models from Ancient Greece. Annapolis, MD: Naval Institute Press P127.</
- ^ Gottlicher, A. 2004. "A Newly Acquired Ancient Ship-model in Kassel, Germany." IJNA33.1:154.
- ^ Gottlicher, A. 2004. "A Newly Acquired Ancient Ship-model in Kassel, Germany." IJNA33.1:154-5.
- ^ a b c Tilley, A. 2007. "Rowing Ancient Warships: Evidence from a Newly Published Ship Model. IJNA 4.2:293.
- ^ a b c Basch, L. 1975. "Another Punic Wreck in Sicily: its ram." IJNA4.2:201.
- ^ Johnston, P.F. 1985. Ship and Boat Models in Ancient Greece.Annapolis, MD: Naval Institute Press P. 12.
- ^ a b c d e Raban, A. and Y. Kahanow. 2003. "Clay Models of Phoenician Vessels in the Hecht Musesum at the University of Haifa, Israel." IJNA 32.1:61.
- ^ a b Raban, A. and Y. Kahanow. 2003. "Clay Models of Phoenician Vessels in the Hecht Musesum at the University of Haifa, Israel." IJNA 32.1:62.
- ^ Jones, D. 1995. Boats. Austin: Universtiy of Texas Press P 26.
- ^ Jones, D. 1990. Model Boats from the Tomb of Tutankamun. Oxford: Griffith Institute P 2.
- ^ a b c Jones, D. 1990. Model Boats from the Tomb of Tutankamun. Oxford: Griffith Institute P 3.
- ^ Jones, D. 1990. Model Boats from the Tomb of Tutankamun. Oxford: Griffith Institute P 1.
- ^ a b Jones, D. 1995. Boats. Austin: Universtiy of Texas Press P 30.
- ^ Hirschfeld, N. 2009. "Egyptian Seafaring." Class Lecture, 23 January, San Antonio.
- ^ "Church Ships". Henning Thalund. http://www.kirkeskibe.dk/en/index.htm. Retrieved 2007-12-05.
- ^ a b c Lavery, Brian & Stephens, Simon (1995). Ship Models, Their Purpose and Development from 1650 to the Present. Zwemmer. ISBN 0302006540. http://books.google.com/?id=oRP5AQAACAAJ&dq=%27%27Ship+Models,+Their+Purpose+and+Development+From+1650+to+the+Present%27%27.
- ^ "The Pilkington Collection of French Prisoner of War Miniature Models". Merseyside Maritime Museum. December 2007. http://www.liverpoolmuseums.org.uk/maritime/collections/artsea/models/pilkington.asp. Retrieved 2007-12-05.
- ^ "Ship Models - Prisoner of War Work". National Maritime Museum (United Kingdom). December 2007. http://www.nmm.ac.uk/collections/search/listResults.cfm?name=Prisoner%20of%20war%20work%2C%20Full%20hull%20model&category=shipmodels&sortBy=title. Retrieved 2007-12-05.
- ^ a b "Club history: The Model Yacht Sailing Association". The Model Yacht Sailing Association. December 2003. Archived from the original on 2007-11-14. http://web.archive.org/web/20071114131027/http://www.mysa.org.uk/default.asp?PageNum=2. Retrieved 2007-12-05.
- ^ "Brief History: Basset-Lowke and No. 78". Hunterian Art Gallery, University of Glasgow. 1999. Archived from the original on 2007-11-14. http://web.archive.org/web/20071114060607/http://www.78derngate.org.uk/old/docs/78lowke.htm. Retrieved 2007-12-05.
- ^ Head, Derek (1997). Bassett-Lowke Waterline Ship Models. New Cavendish Books. ISBN 1872727727. http://books.google.com/?id=8QcWAAAACAAJ&dq=bassett-lowke+waterline+ship+models.
- ^ Wegner, Dana (March 2007). "Here Today, Maybe Gone Tomorrow?". Nautical Research Journal 45 (1). http://shipmodeling.net/vb_forum/articles-print3.html. Retrieved 2007-12-05.
- ^ a b Macarthur, Antonia (2008-05-01). "Bateaux Jouets - Toy Boats from Paris 1850-1950". Signals (Sydney, Australia: Australian National Maritime Museum) 82: 11–15.
- ^ "Toy Model Kits". Advarneg Incorporated. 2007. http://www.madehow.com/Volume-6/Toy-Model-Kit.html. Retrieved 2007-12-05.
- ^ a b Ashey, Mike (2000). Basics of Ship Modeling: The Illustrated Guide. Kalmbach Publishing Company. ISBN 0890243727. http://books.google.com/?id=2ffCoUTsj4YC&dq=The+Basics+of+Ship+Modeling.
- ^ Schönfeldt, Peter; Klaus Hogardt (1998) (in German). Wiking-modelle.: Die Schiffe und Flugzeuge. Koehler Publishing. ISBN 3782207319. http://books.google.com/?id=GbTeAAAACAAJ&dq=Wiking-Modelle+Die+Schiffe+und+Flugzeuge.
- ^ "US Navy ship models built by the Gibbs & Cox Company". Carderock Division, Naval Surface Warfare Center. May 2007. http://www.dt.navy.mil/cnsm/faq_09d.html. Retrieved 2007-12-12.
- ^ "Specifications for construction of exhibition models of U.S. Naval vessels". Carderock Division, Naval Surface Warfare Center. May 2007. http://www.dt.navy.mil/cnsm/const_1.html. Retrieved 2007-12-12.
- ^ "Puget Sound Maritime Pilots". http://www.pspilots.org/pilots_training_scale.html.
Architectural models · Brass models · Building models · Diecast models · Model aircraft · Model cars · Model commercial vehicles · Model construction vehicles · Model figures · Matchstick models · Model military vehicles · Dioramas · Model robots · Model trains · Model rockets · Model ships · Gundam model · Miniature wargaming · 1:6 scale modeling
- Model Boat Mayhem
- Model Ship Builder
- Model Ship World
- Model Shipwrights Model Ship Building Community
- ModelWarships.com Plastic ship models
- Steel Navy Plastic ship models of the modern era
- 1250 Home Page devoted to 1/1200 and 1/1250 scale models
- Ship Modeling FAQ
- Model Boat Links http://home.att.net/~ShipModelFAQ/
- The Maritime History Virtual Archives
- The Nautical Research Guild
- The Nautical Research Guild - a model shipwright association
Wikimedia Foundation. 2010.
Look at other dictionaries:
Ship model basin — US Experimental Model Basin, circa 1900 … Wikipedia
Wooden ship model — Wooden ship models or wooden model ships are scale representations of ships, constructed mainly of wood. This type of model has been built for over two thousand years. [Williams, Guy R. The World of Model Ships and Boats London 1971 Page 30 ]… … Wikipedia
Ship stability — is an area of Naval Architecture and ship design that deals with how a ship behaves at sea, both in still water and in waves. Considerations are made as to the center of gravity and center of buoyancy of vessels and how they interact. History… … Wikipedia
Model yacht — may refer to: model yachting, the pastime of building and racing model yachts ship model, scale representations of ships This disambiguation page lists articles associated with the same title. If an internal lin … Wikipedia
ship — shipless, adj. shiplessly, adv. /ship/, n., v., shipped, shipping. n. 1. a vessel, esp. a large oceangoing one propelled by sails or engines. 2. Naut. a. a sailing vessel square rigged on all of three or more masts, having jibs, staysails, and a… … Universalium
Model yachting — This article is concerned with model vessels that are operated, either though programatic means or by remote control. For models intended for static display see ship model San Francisco Model Yacht Club X class (1000 square inches, few other… … Wikipedia
Ship — A ship IPA|/ʃɪp/ audio|en us ship.ogg|Audio (US) is a large vessel that floats on water. Ships are generally distinguished from boats based on size. Ships may be found on lakes, seas, and rivers and they allow for a variety of activities, such as … Wikipedia
model — [mäd′ l] n. [Fr modèle < It modello, dim. of modo < L modus,MODE] 1. a) a small copy or imitation of an existing object, as a ship, building, etc., made to scale b) a preliminary representation of something, serving as the plan from which… … English World dictionary
Model Spy — Captain Scarlet and the Mysterons episode Episode no. Episode 14 Directed by Ken Turner Written by … Wikipedia
Ship in a Bottle — may refer to:* Ship in a bottle, a type of impossible bottle containing a model ship * Ship in a Bottle ( TNG episode), a sixth season episode of Star Trek: The Next Generation … Wikipedia