Angular velocity


Angular velocity

:"Do not confuse with angular frequency"

The unit for angular velocity is rad/s.

In physics, the angular velocity is a vector quantity (more precisely, a pseudovector) which specifies the angular speed, and axis about which an object is rotating. The SI unit of angular velocity is radians per second, although it may be measured in other units such as degrees per second, degrees per hour, etc. When measured in cycles or rotations per unit time (e.g. revolutions per minute), it is often called the rotational velocity and its magnitude the rotational speed. Angular velocity is usually represented by the symbol omega (Ω or ω). The direction of the angular velocity vector is perpendicular to the plane of rotation, in a direction which is usually specified by the right hand rule.

The angular velocity of a particle

Two dimensions

The angular velocity of a particle in a 2-dimensional plane is the easiest to understand. As shown in the figure on the right (typically expressing the angular measures "φ" and "θ" in radians), if we draw a line from the origin (O) to the particle (P), then the velocity vector (v) of the particle will have a component along the radius (radial component, v) and a component perpendicular to the radius (tangential component, v).

A radial motion produces no rotation of the particle (relative to the origin), so for purposes of finding the angular velocity the parallel (radial) component can be ignored. Therefore, the rotation is completely produced by the tangential motion (like that of a particle moving along a circumference), and the angular velocity is completely determined by the perpendicular (tangential) component.

It can be seen that the rate of change of the angular position of the particle is related to the tangential velocity by::mathrm{v}_perp=r,frac{dphi}{dt}Utilizing "θ", the angle between vectors v and v, or equivalently as the angle between vectors r and v, gives::mathrm{v}_perp=|mathrm{mathbf{v|,sin( heta).

Combining the above two equations and defining the angular velocity as ω=dφ/dt yields::omega=frac,hat{n}

which, by the definition of the cross product, can be written:

:oldsymbolomega=frac{mathbf{r} imesmathbf{v{|mathrm{mathbf{r|^2}

Higher dimensions

In general, the angular velocity in an n-dimensional space is the time derivative of the angular displacement tensor which is a second rank skew-symmetric tensor. This tensor will have n(n-1)/2 independent components and this number is the dimension of the Lie algebra of the Lie group of rotations of an "n"-dimensional inner product space. [http://math.ucr.edu/home/baez/classical/galilei2.pdf Rotations and Angular Momentum] on the Classical Mechanics page of [http://math.ucr.edu/home/baez/README.html the website of John Baez] , especially Questions 1 and 2.] It turns out that in three dimensional space angular velocity can be represented by vector because number of independent components is equal to number of dimensions of space.

Angular velocity of a rigid body

In order to deal with the motion of a rigid body, it is best to consider a coordinate system that is fixed with respect to the rigid body, and to study the coordinate transformations between this coordinate and the fixed "laboratory" system. As shown in the figure on the right, the lab system's origin is at point O, the rigid body system origin is at O' and the vector from O to O' is R. A particle ("i") in the rigid body is located at point P and the vector position of this particle is Ri in the lab frame, and at position ri in the body frame. It is seen that the position of the particle can be written:

:mathbf{R}_i=mathbf{R}+mathbf{r}_i

The defining characteristic of a rigid body is that the distance between any two points in a rigid body is unchanging in time. This means that the length of the vector mathbf{r}_i is unchanging. By Euler's rotation theorem, we may replace the vector mathbf{r}_i with mathcal{R}mathbf{r}_{io} where mathcal{R} is a rotation matrix and mathbf{r}_{io} is the position of the particle at some fixed point in time, say t=0. This replacement is useful, because now it is only the rotation matrix mathcal{R} which is changing in time and not the reference vector mathbf{r}_{io}, as the rigid body rotates about point O'. The position of the particle is now written as:

:mathbf{R}_i=mathbf{R}+mathcal{R}mathbf{r}_{io}

Taking the time derivative yields the velocity of the particle:

:mathbf{V}_i=mathbf{V}+frac{dmathcal{R{dt}mathbf{r}_{io}

where Vi is the velocity of the particle (in the lab frame) and V is the velocity of O' (the origin of the rigid body frame). Since mathcal{R} is a rotation matrix its inverse is its transpose. So we substitute mathcal{I}=mathcal{R}^Tmathcal{R}:

:mathbf{V}_i=mathbf{V}+frac{dmathcal{R{dt}mathcal{I}mathbf{r}_{io}

:mathbf{V}_i=mathbf{V}+frac{dmathcal{R{dt}mathcal{R}^Tmathcal{R}mathbf{r}_{io}

:mathbf{V}_i=mathbf{V}+frac{dmathcal{R{dt}mathcal{R}^Tmathbf{r}_{i}

Continue by taking the time derivitve of mathcal{R}mathcal{R}^T:

:mathcal{I}=mathcal{R}mathcal{R}^T

:0=frac{dmathcal{R{dt}mathcal{R}^T+mathcal{R}frac{dmathcal{R}^T}{dt}

Applying the formula (AB)T = BTAT:

:0=frac{dmathcal{R{dt}mathcal{R}^T+(frac{dmathcal{R{dt}mathcal{R}^T)^T

frac{dmathcal{R{dt}mathcal{R}^T is the negative of its transpose. Therefore it is a skew symmetric 3x3 matrix. We can therefore take its dual to get a 3 dimensional vector. frac{dmathcal{R{dt}mathcal{R}^T is called the angular velocity tensor. If we take the dual of this tensor, matrix multiplication is replaced by the cross product. Its dual is called the angular velocity pseudovector, ω.

:oldsymbolomega= [omega_x,omega_y,omega_z]

Substituting ω into the above velocity expression:

:mathbf{V}_i=mathbf{V}+oldsymbolomega imesmathbf{r}_i.

It can be seen that the velocity of a point in a rigid body can be divided into two terms - the velocity of a reference point fixed in the rigid body plus the cross product term involving the angular velocity of the particle with respect to the reference point. This angular velocity is the "spin" angular velocity of the rigid body as opposed to the angular velocity of the reference point O' about the origin O.

It is an important point that the spin angular velocity of every particle in the rigid body is the same, and that the spin angular velocity is independent of the choice of the origin of the rigid body system or of the lab system. In other words, it is a physically real quantity which is a property of the rigid body, independent of one's choice of coordinate system. The angular velocity of the reference point about the origin of the lab frame will, however, depend on these choices of coordinate system. It is often convenient to choose the center of mass of the rigid body as the origin of the rigid body system, since a considerable mathematical simplification occurs in the expression for the angular momentum of the rigid body.

ee also

* Angular frequency
* Angular acceleration
* Angular momentum
* Areal velocity
* Isometry
* Lie algebra
* Orthogonal group
* Rigid body dynamics
* Rotation group

References

*cite book|last=Symon | first=Keith |title=Mechanics|publisher=Addison-Wesley, Reading, MA|year=1971|id = ISBN 0-201-07392-7

*cite book |last=Landau |first=L.D. |authorlink=Lev Landau |coauthors=Lifshitz, E.M. |title= Mechanics|year=1997 |publisher=Butterworth-Heinemann |isbn=0-750-62896-0


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Angular velocity — Velocity Ve*loc i*ty, n.; pl. {Velocities}. [L. velocitas, from velox, ocis, swift, quick; perhaps akin to v?lare to fly (see {Volatile}): cf. F. v[ e]locit[ e].] [1913 Webster] 1. Quickness of motion; swiftness; speed; celerity; rapidity; as,… …   The Collaborative International Dictionary of English

  • Angular velocity — Angular An gu*lar, a. [L. angularis, fr. angulus angle, corner. See {Angle}.] 1. Relating to an angle or to angles; having an angle or angles; forming an angle or corner; sharp cornered; pointed; as, an angular figure. [1913 Webster] 2. Measured… …   The Collaborative International Dictionary of English

  • angular velocity — Physics. the time rate of change of angular position of a rotating body, usually expressed in radians per second or radians per minute. [1810 20] * * *  time rate at which an object rotates, or revolves, about an axis, or at which the angular… …   Universalium

  • angular velocity — kampinis greitis statusas T sritis automatika atitikmenys: angl. angular speed; angular velocity vok. Winkelgeschwindigkeit, f rus. угловая скорость, f pranc. vitesse angulaire, f …   Automatikos terminų žodynas

  • angular velocity — kampinis greitis statusas T sritis Standartizacija ir metrologija apibrėžtis Vektorinis dydis, lygus kūno pasisukimo kampo pirmajai išvestinei pagal laiką: ω = dφ/dt; čia dφ – pasisukimo kampo pokytis, dt – laiko tarpas. Kai kūnas sukasi tolygiai …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • angular velocity — kampinis greitis statusas T sritis fizika atitikmenys: angl. angular speed; angular velocity vok. Winkelgeschwindigkeit, f rus. угловая скорость, f pranc. vitesse angulaire, f …   Fizikos terminų žodynas

  • angular velocity — noun (physics) the rate of change of the angular position of a rotating body; usually expressed in radians per second or radians per minute • Topics: ↑physics, ↑natural philosophy • Hypernyms: ↑speed, ↑velocity …   Useful english dictionary

  • angular velocity — noun The angle turned, in a given time, by a body rotating about an axis; the rate of rotation through an angle. See Also: angular acceleration …   Wiktionary

  • angular velocity — rate of change of angular displacement …   English contemporary dictionary

  • angular velocity — /æŋgjələ vəˈlɒsəti/ (say anggyuhluh vuh losuhtee) noun the rate of change of the angular displacement of a moving body about an axis; in SI units, measured in radians per second …   Australian English dictionary


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.