- Contrast ratio
The contrast ratio is a property of a display system, defined as the ratio of the luminance of the brightest color (white) to that of the darkest color (black) that the system is capable of producing. A high contrast ratio is a desired aspect of any display.
There is no official, standardized way to measure contrast ratio for a system or its parts, nor is there a standard for defining "Contrast Ratio" that is accepted by any standards organization so ratings provided by different manufacturers of display devices are not necessarily comparable to each other due to differences in method of measurement, operation, and unstated variables. Manufacturers have traditionally favored measurement methods that isolate the device from the system, whereas other designers have more often taken the effect of the room into account. An ideal room would absorb all the light reflecting from a projection screen or emitted by a CRT, and the only light seen in the room would come from the display device. With such a room, the contrast ratio of the image would be the same as the contrast ratio of the device. Real rooms reflect some of the light back a static motionless image to a system that displays a dynamic, changing picture slightly complicates the definition of the contrast ratio, because of the need to take into account the extra temporal dimension to the measuring process. Thus the ratio of the luminosity of the brightest and the darkest color the system is capable of producing simultaneously at any instant of time is called static contrast ratio, while the ratio of the luminosity of the brightest and the darkest color the system is capable of producing over time is called dynamic contrast ratio.
Methods of measurement
Many display devices favor the use of the full on/full off method of measurement, as it cancels out the effect of the room and results in an ideal ratio. Equal proportions of light reflect from the display to the room and back in both "black" and "white" measurements, as long as the room stays the same. This will inflate the light levels of both measurements proportionally, leaving the black to white luminance ratio unaffected.
Some manufacturers have gone as far as using different device parameters for the three tests, even further inflating the calculated contrast ratio. With DLP projectors, one method to do this is to enable the clear sector of the color filter wheel for the "on" part and disable it for the "off" part This practice is rather dubious, as it will be impossible to reproduce such contrast ratios with any useful image content.
Another measure is the ANSI contrast, in which the measurement is done with a checker board patterned test image where the black and white luminosity values are measured simultaneously. This is a more realistic measure of system capability, but includes the potential of including the effects of the room into the measurement, if the test is not performed in a room that is close to ideal.
It is useful to note that the full on/full off method effectively measures the dynamic contrast ratio of a display, while the ANSI contrast measures the static contrast ratio.
Dynamic Contrast (DC)
A notable recent development in the LCD technology is the so-called "dynamic contrast" (DC), also called "advanced contrast ratio" (ACR, example) and various other designations. When there is a need to display a dark image, the display would underpower the backlight lamp (or decrease the aperture of the projector's lens using an iris), but will proportionately amplify the transmission through the LCD panel. This gives the benefit of realizing the potential static contrast ratio of the LCD panel in dark scenes when the image is watched in a dark room. The drawback is that if a dark scene does contain small areas of superbright light, image quality may be over exposed.
The trick for the display is to determine how much of the highlights may be unnoticeably blown out in a given image under the given ambient lighting conditions.
Brightness, as it is most often used in marketing literature, refers to the emitted luminous intensity on screen measured in candela per square metre (cd/m2). The higher the number, the brighter the screen.
It is also common to market only the dynamic contrast ratio capability of a display (when it is better than its static contrast ratio), which should not be directly compared to the static contrast ratio. A plasma display with a static 5000:1 contrast ratio will show superior contrast to an LCD with 5000:1 dynamic and 1000:1 static contrast ratio when the input signal contains a full range of brightnesses from 0 to 100% simultaneously. They will, however, be on-par when input signal ranges only from 0 to 20% brightness.
Contrast ratio in a real room
In marketing literature, contrast ratios for emissive (as opposed to reflective) displays are always measured under the optimum condition of a room in total darkness. In typical viewing situations the contrast ratio is significantly lower due to the reflection of light from the surface of the display, making it harder to distinguish between different devices with very high contrast ratios. How much the room light reduces the contrast ratio depends on the luminance of the display, as well as the amount of light reflecting off the display.
A clean print at a typical movie theater may have a contrast ratio of 500:1 Dynamic contrast ratio is usually measured at factory with two panels (one vs another) of the same model as each panel will have an inherent Dark and Light (Hot) spot. Static is usually measured with the same screen showing half screen full bright vs half screen full dark. This usually results in a lower ratio as brightness will creep into the dark area of the screen thus giving a higher luminance.
- ^ Evan Powell. Let's Ignore Contrast Specs. March 27, 2008.
- ^ www.practical-home-theater-guide.com. Extensive coverage of practical contrast ratio
- ^ The Truth About Inflated HDTV Contrast Ratios. August 27, 2007.
- ^ www.poynton.com. On practical contrast ratios in real environments
- ^ HomeTheaterMag.com - Contrast Ratio – The Useless Statistic
- ^ www.da-lite.com. Contrast - From Dark to Light. Angles of View vol. III.
Wikimedia Foundation. 2010.
Look at other dictionaries:
contrast ratio — kontrastas statusas T sritis Standartizacija ir metrologija apibrėžtis Apibrėžtį žr. priede. priedas( ai) Grafinis formatas atitikmenys: angl. contrast ratio vok. Kontrast, m; Kontrastverhältnis, n rus. контраст, m; коэффициент контраста, m pranc … Penkiakalbis aiškinamasis metrologijos terminų žodynas
contrast ratio — adjective ratio of the luminance of white to that of black of a display. A higher value means a higher contrast of white and black. See Also: display, LCD, transparency … Wiktionary
acceptable contrast ratio — leidžiamasis kontrastas statusas T sritis radioelektronika atitikmenys: angl. acceptable contrast ratio vok. annehmbares Kontrastverhältnis, n rus. допустимый контраст, m; допустимый коэффициент контраста, m pranc. plage de contraste, f … Radioelektronikos terminų žodynas
Contrast — may refer to: Contrast (vision), the difference in color and light between parts of an image Contrast (linguistics), expressing distinctions between words Contrast (statistics), a combination of averages whose coefficients add up to zero, or the… … Wikipedia
Contrast (vision) — Left side of the image has low contrast, the right has higher contrast … Wikipedia
Contrast resolution — is the ability to distinguish between differences in intensity in an image. The measure is used in medical imaging to quantify the quality of acquired images. It is a difficult quantity to define, because it depends on the human observer as… … Wikipedia
Ratio Studiorum — • The educational system of the Jesuits Catholic Encyclopedia. Kevin Knight. 2006. Ratio Studiorum Ratio Studiorum † … Catholic encyclopedia
Contrast-to-noise ratio — Haze over Kuala Lumpur. Contrast to noise ratio (CNR) is a measure used to determine image quality. CNR is similar to the metric, signal to noise ratio (SNR), but subtracts off a term before taking the ratio. This is important when there is a… … Wikipedia
contrast — contrastable, adj. contrastably, adv. contrastingly, adv. v. /keuhn trast , kon trast/; n. /kon trast/, v.t. 1. to compare in order to show unlikeness or differences; note the opposite natures, purposes, etc., of: Contrast the political rights of … Universalium
contrast — con•trast v. [[t]kənˈtræst, ˈkɒn træst[/t]] n. [[t]ˈkɒn træst[/t]] v. t. 1) to compare in order to show unlikeness or differences; note the opposite qualities of 2) to exhibit unlikeness on comparison with something else; form a contrast 3) ling … From formal English to slang