Socket A

Socket A

CPU socket
name = Socket 462 / A


formfactors = Ceramic Pin Grid Array (CPGA)
Organic Pin Grid Array (OPGA)
type = PGA-ZIF
contacts = 453
protocol = EV6
fsb = 100 MHz, 133 MHz, 166 MHz and 200 MHz
equivalent to FSB200, FSB266, FSB333 and FSB400 (Double data rate Bus)
voltage = 1.0–2.05 V
processors = AMD Athlon (650 MHz – 1400 MHz)
AMD Athlon XP (1500+ – 3200+)
AMD Duron (600 MHz – 1800 MHz)
AMD Sempron (2000+ – 3300+)
AMD Athlon MP (1000 MHz – 3000+)
AMD Geode NX (667 MHz – 2200 MHz)

Socket A (also known as Socket 462) is the CPU socket used for AMD processors ranging from the Athlon Thunderbird to the Athlon XP/MP 3200+, and AMD budget processors including the Duron and Sempron. Socket A also supports the recent AMD Geode NX embedded processors (derived from the Mobile Athlon XP). The socket is a zero insertion force pin grid array type with 453 pins (nine pins are blocked in the socket to prevent accidental insertion of Socket 370 CPUs, hence the number 462). The front side bus frequencies supported for the AMD Athlon XP and Sempron are 133 MHz, 166 MHz, and 200 MHz.

AMD recommends that the mass of a Socket A CPU cooler not exceed 300 grams (10.6 ounces). Heavier coolers may result in damage to the die when the system is not properly handled.

Socket A has been discontinued in favor of Socket 754, Socket 939, and recently Socket AM2, except for its use with Geode NX processors. However, microprocessors and motherboards from many vendors are still available.

Technical specifications

* Support of processor clock-speeds between 600 MHz (Duron) to 2333 MHz (Athlon XP 3200+)
* Double data rate 100, 133, 166 and 200 MHz front side bus on Duron, XP and Sempron processors, based on the DEC Alpha EV6 bus.

Initially launched with just 100 MHz FSB support from earlier chipsets, and evolved stepwise to faster FSB, so while the socket has remained pin compatible throughout its lifetime, clock, timing, BIOS and voltage issues restrict compatibility between older chipsets and later processors. These though are still hard to find.

ocket A mechanical load limits

All socket A processors (Athlon, Sempron, Duron and Geode NX) have the following mechanical maximum load limits which should not be exceeded during heatsink assembly, shipping conditions, or standard use. Load above those limits may crack the processor die and make it unusable.Those load limits are quite small compared to the load limits of Socket 478 processors. Indeed, they were so small that many users ended up with cracked processors while trying to remove or attach heatsinks for their fragile processors. It must be noted though that many processors were cracked by non-standard or non-certified heatsink solutions as many, although by no means all, Socket A processors were shipped as bare OEM processors in trays.

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Socket M — Type PGA ZIF Chip form factors …   Wikipedia

  • Socket M — Дата выпуска: 2006 год …   Википедия

  • Socket M2 — Socket AM2 Характеристики Дата выпуска: 23 мая 2006 Число контактов: 940 Процессоры: Athlon 64, Athlon 64 FX, Athlon 64 X2, Phenom X4 и X3 (ограниченная поддержка) …   Википедия

  • Socket 7 — Socket 7 …   Википедия

  • Socket A — Тип разъёма: ZIF Число контактов: 453 …   Википедия

  • Socket 8 — Тип разъёма: ZIF Форм факторы процессоров: CPGA Число конт …   Википедия

  • Socket 3 — Форм факторы процессоров …   Википедия

  • Socket F —    …   Википедия

  • Socket S1 — Дата выпуска: 17 мая 2006 Тип разъёма: ZIF Форм факторы процессоров: PGA Число контактов: 638 Частота FSB, МГц …   Википедия

  • Socket P — Тип разъёма: PGA Форм фактор процессоров: Fli …   Википедия

  • Socket T — (LGA 775) Тип разъёма: LGA Форм фактор процессоров: Flip chip …   Википедия

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”