Pocket watch

Pocket watch
A gold pocket watch with hunter case and watch chain
One of the first pocket watches, called "Nuremberg Egg", made around 1510 and attributed to Peter Henlein. Germanisches Nationalmuseum Nuremberg

A pocket watch (or pocketwatch) is a watch that is made to be carried in a pocket, as opposed to a wristwatch, which is strapped to the wrist. They were the most common type of watch from their development in the 16th century until wristwatches became popular after World War I during which a transitional design, trench watches, were used by the military. Pocket watches generally have an attached chain to allow them to be secured to a waistcoat, lapel, or belt loop, and to prevent them from being dropped. Watches were also mounted on a short leather strap or fob, when a long chain would have been cumbersome or likely to catch on things. This fob could also provide a protective flap over their face and crystal. Women's watches were normally of this form, with a fob that was more decorative than protective. Chains were frequently decorated with a silver or enamel pendant, often carrying the arms of some club or society, which by association also became known as a fob. Ostensibly "practical" gadgets such as a watch winding key, vesta case or a cigar cutter also appeared on watch chains, although usually in an overly decorated style. Also common are fasteners designed to be put through a buttonhole and worn in a jacket or waistcoat, this sort being frequently associated with and named after train conductors.

An early reference to the pocket watch is in a letter in November 1462 from the Italian clockmaker Bartholomew Manfredi to the Marchese di Mantova Federico Gonzaga[citation needed], where he offers him a "pocket clock" better than that belonging to the Duke of Modena. By the end of the 15th Century, spring-driven clocks appeared in Italy, and in Germany. Peter Henlein, a master locksmith of Nuremberg, was regularly manufacturing pocket watches by 1524. Thereafter, pocket watch manufacture spread throughout the rest of Europe as the 16th century progressed. Early watches only had an hour hand, the minute hand appearing in the late 17th century.[1][2] The first American pocket watches with machine made parts were manufactured by Henry Pitkin with his brother in the later 1830s.

Contents

Early pocket watches

Antique verge fusée pocketwatch movement, from 1700s.

The watch was first created in the 16th century, initially in spherical (Pomander) or cylindrical cases, when the spring driven clock was invented. These watches were at first quite big and boxy and were worn around the neck. It was not for another century that it became common to wear a watch in a pocket.

Until the second half of the 18th century, watches were luxury items; as an indication of how highly they were valued, English newspapers of the 18th century often include advertisements offering rewards of between one and five guineas merely for information that might lead to the recovery of stolen watches.[citation needed] By the end of the century, however, watches (while still largely hand-made) were becoming more common; special cheap watches were made for sale to sailors, with crude but colourful paintings of maritime scenes on the dials.

Up to the 1720s, almost all watch movements were based on the verge escapement, which had been developed for large public clocks in the 14th century. This type of escapement involved a high degree of friction and did not include any kind of jewelling to protect the contacting surfaces from wear. As a result, a verge watch could rarely achieve any high standard of accuracy. (Surviving examples[citation needed] mostly run very fast, often gaining an hour a day or more.) The first widely-used improvement was the cylinder escapement, developed by the Abbé de Hautefeuille early in the 18th century and applied by the English maker George Graham. Then, towards the end of the century, the lever escapement (invented by Thomas Mudge in 1759) was put into limited production by a handful of makers including Josiah Emery (a Swiss based in London) and Abraham-Louis Breguet. With this, a domestic watch could keep time to within a minute a day. Lever watches became common after about 1820, and this type is still used in most mechanical watches today.

In 1857 the American Watch Company in Waltham, Massachusetts introduced the Waltham Model 57, the first to use standarized parts. This cut the cost of manufacture and repair. Most Model 57 pocket watches were in a coin silver, only 80 pure unlike sterling silver.

Case back showing hinges, Waltham model 57 American made
Case back inside, with hallmark of Waltham, a model 57

Watch manufacture was becoming streamlined; the Japy family of Schaffhausen, Switzerland, led the way in this, and soon afterwards the new-born American watch industry developed much new machinery, so that by 1865 the American Watch Company (afterwards known as Waltham) could turn out more than 50,000 reliable watches each year. This development drove the Swiss out of their dominating position at the cheaper end of the market, compelling them to raise the quality of their products and establish themselves as the leaders in precision and accuracy instead.

Use in railroading in the United States

The rise of railroading during the last half of the 19th century led to the widespread use of pocket watches. A famous train wreck on the Lake Shore and Michigan Southern Railway in Kipton, Ohio on April 19, 1891 occurred because one of the engineers' watches had stopped for four minutes. The railroad officials commissioned Webb C. Ball as their Chief Time Inspector, in order to establish precision standards and a reliable timepiece inspection system for Railroad chronometers. This led to the adoption in 1893 of stringent standards for pocket watches used in railroading. These railroad-grade pocket watches, as they became colloquially known, had to meet the General Railroad Timepiece Standards adopted in 1893 by almost all railroads. These standards read, in part:

"...open faced, size 16 or 18, have a minimum of 17 jewels, adjusted to at least five positions, keep time accurately to within 30 seconds a week, adjusted to temps of 34 °F (1 °C) to 100 °F (38 °C), have a double roller, steel escape wheel, lever set, regulator, winding stem at 12 o'clock, and have bold black Arabic numerals on a white dial, with black hands."

Types of pocket watches

There are two main styles of pocket watch, the hunter-case pocket watch, and the open-face pocket watch.

Open-face watches

An open-face pocket watch made by the Polish watchmaker Franciszek Czapek, ca. 1 876.

An open-faced, or Lépine,[3] watch, is one in which the case lacks a metal cover to protect the crystal. It is typical for an open-faced watch to have the pendant located at 12:00 and the sub-second dial located at 6:00. Occasionally, a watch movement intended for a hunting case (with the winding stem at 3:00 and sub second dial at 6:00) will have an open-faced case. Such watch is known as a "sidewinder." Alternatively, such a watch movement may be fitted with a so-called conversion dial, which relocates the winding stem to 12:00 and the sub-second dial to 3:00. After 1908, watches approved for railroad service were required to be cased in open-faced cases with the winding stem at 12:00.

Hunter-case watches

A hunter-case pocket watch is the kind with a spring-hinged circular metal lid or cover, that closes over the watch-dial and crystal, protecting them from dust, scratches and other damage or debris. The majority of antique and vintage hunter-case watches have the lid-hinges at the 9 o’clock position and the stem, crown and bow of the watch at the 3 o’clock position. Modern hunter-case pocket watches usually have the hinges for the lid at the 6 o’clock position and the stem, crown and bow at the 12 o’clock position, as with open-face watches. In both styles of watch-cases, the sub-seconds dial was always at the 6 o’clock position. A hunter-case pocket watch with a spring-ring chain is pictured at the top of this page.

There is an intermediate type, known as the half-hunter, in which the outer lid has a glass panel in the centre giving a view of the hands. The hours are marked, often in blue enamel, on the outer lid itself; thus with this type of case one can tell the time without opening the lid.

Types of watch movements

Key-wind, key-set movements

The very first pocket watches, since their creation in the 16th century, up until the third quarter of the 19th century, had key-wind and key-set movements. A watch key was necessary to wind the watch and to set the time. This was usually done by opening the caseback and putting the key over the winding-arbor (which was set over the watch's winding-wheel, to wind the mainspring) or by putting the key onto the setting-arbor, which was connected with the minute-wheel and turned the hands. Some watches of this period had the setting-arbor at the front of the watch, so that removing the crystal and bezel was necessary to set the time. Watch keys are the origin of the class key, common paraphernalia for American high-school and university graduation.

Stem-wind, stem-set movements

The ca.1950 Omega pocket watch is of stem-wind, stem-set movement.

Created by Patek-Philippe in the 1850s, the stem-wind, stem-set movement did away with the watch key which was a necessity for the operation of any pocket watch up to that point. The first stem-wind and stem-set pocket watches were sold during the Great Exhibition in London in 1851 and the first owners of these new kinds of watches were Queen Victoria and Prince Albert. Stem-wind, stem-set movements are the most common type of watch-movement found in both vintage and modern pocket watches.

Stem-wind, lever-set movements

Mandatory for all railroad watches, this kind of pocket watch was set by opening the crystal and bezel and pulling out the setting-lever (some pre-1891 hunter cases have levers accessible without removing the crystal or bezel), which was found at either the 10 or 2 o'clock positions on open-faced watches, and at 5:00 on hunting cased watches. Once the lever was pulled out, the crown could be turned to set the time. The lever was then pushed back in and the crystal and bezel were closed over the dial again. This method of time setting on pocket watches was preferred by American and Canadian railroads, as lever setting watches make accidental time changes impossible. After 1908, lever setting was generally required for new watches entering service on American railroads.

Stem-wind, pin-set movements

Much like the lever-set movements, these pocket watches had a small pin or knob next to the watch-stem that had to be depressed before turning the crown to set the time and releasing the pin when the correct time had been set. This style of watch is occasionally referred to as "nail set", as the set button must be pressed using a finger nail.

Jeweled movements

For more information, see Mechanical watch

Watches of any quality will be jeweled. A jewel in a mechanical watch is a small, shaped piece of a hard mineral. Ruby and sapphire are most common, although diamond, garnet, and even glass are often seen. Starting in the early 20th century, synthetic jewels were almost universally used. Before that time, low grade natural jewels which were unsuitable as gemstones were used. In either case, the jewels have virtually no monetary value.

The most common types of jewels are hole jewels. Hole jewels are disks (normally flying saucer shaped) which have a carefully shaped and sized hole. The pivot of an arbor rides in this hole. The jewel provides an extremely smooth and hard surface which is very wear resistant, and when properly lubricated, very low friction. Thus, hole jewels both reduce friction and wear on the moving parts of a watch.

The other basic jewel types are cap jewels, roller jewels, and pallet jewels.

Cap jewels are always paired with hole jewels, and always with a conically shaped pivot. For a properly designed hole and cap jewel system, the pivot will always rest as a pin point on a thin film of oil. Thus, a hole and cap jewel offer lower friction and better performance across different positions as compared to simply a cap jewel.

The roller jewel, also called the impulse jewel or simply impulse pin, is a thin rod of ruby or sapphire, usually in the shape of a letter "D". The roller jewel is responsible for coupling the motion of the balance wheel to that of the pallet fork.

Pallet jewels interact with the escape wheel. They are the surfaces which, 5 times a second, lock the gear train of the watch and then transfer power to the balance wheel.

A jeweled watch should contain at least 7 jewels. The seven jewels include 2 hole jewels on the balance wheel, 2 cap jewels on the balance wheel, a roller jewel, and 2 pallet jewels.

More highly jeweled watches add jewels to pivots out from balance wheel, starting with the pallet fork, then the escape wheel, fourth wheel, third wheel, then finally the center wheel. Jeweling to the third wheel gives 15 jewels, jeweling to the center wheel gives 17 jewels. Thus, a 17 jewel watch is considered to be fully jeweled.

With American makers, however, it was common on low-end movements to jewel to the third wheel on only the top (visible) plate of the watch. This gives a total of 11 jewels, but looks identical to a 15 jewel watch unless the dial is removed. Since watches with 15 jewels and less are often not marked as to the jewel count, extreme caution must be exercised when purchasing movements which appear to be 15 jewels.

Additional jewels beyond 17 are used to either add cap jewels, or to jewel the mainspring barrel of the watch. Watches with 19 jewels, particularly those made by Elgin and Waltham, will often have a jeweled mainspring barrel. Alternatively a 19 jewel watch will have additional cap jewels on the escape wheel. 21 jewel watches commonly have cap jewels on both the pallet fork and escape wheel. 23 jewel watches will have a jeweled barrel and fully capped escapement. The timekeeping value of jewels beyond 17 for a time-only movement is often debated.

Complicated movements will often have additional jewels which do serve useful purposes.

Greater jewel counts are often associated with better quality watch movements. While it is true that expensive movements often have higher jewel counts, the jewels themselves are not the reason for this. The jewels themselves add essentially no monetary value, and beyond 17 offer a negligible improvement in timekeeping ability and in movement life. Most of the cost of a more expensive watch is associated with better quality finishing and, more importantly, with a greater number of adjustments.

Adjusted movements

Pocket watch movements are occasionally engraved with the word "Adjusted", or "Adjusted to n positions". This means that the watch has been tuned to keep time under various positions and conditions. There are eight possible adjustments:

  • Dial up.
  • Dial down.
  • Pendant up.
  • Pendant down.
  • Pendant left.
  • Pendant right.
  • Temperature (from 34–100 degrees Fahrenheit).
  • Isochronism (the ability of the watch to keep time, regardless of the mainspring's level of tension).

Positional adjustments are attained by careful poising (ensuring even weight distribution) of the balance-hairspring system as well as careful control of the shape and polish on the balance pivots. All of this achieves an equalization of the effect of gravity on the watch in various positions. Positional adjustments are achieved through careful adjustment of each of these factors, provided by repeated trials on a timing machine. Thus, adjusting a watch to position requires many hours of labor, increasing the cost of the watch. Medium grade watches were commonly adjusted to 3 positions (dial up, dial down, pendant up) while high grade watches were commonly adjusted to 5 positions (dial up, dial down, stem up, stem left, stem right) or even all 6 positions. Railroad watches were required, after 1908, to be adjusted to 5 positions. 3 positions were the general requirement before that time.

Early watches used a solid steel balance. As temperature increased, the solid balance expanded in size, changing the moment of inertia and changing the timing of the watch. In addition, the hairspring would lengthen, decreasing its spring constant. This problem was initially solved through the use of the compensation balance. The compensation balance consisted of a ring of steel sandwiched to a ring of brass. These rings were then split in two places. The balance would, at least theoretically, actually decrease in size with heating to compensate for the lengthening of the hairspring. Through careful adjustment of the placement of the balance screws (brass or gold screws placed in the rim of the balance), a watch could be adjusted to keep time the same at both hot (100° F) and cold (32°) temperatures. Unfortunately, a watch so adjusted would run slow at temperatures between these two. The problem was completely solved through the use of special alloys for the balance and hairspring which were essentially immune to thermal expansion. Such an alloy is used in Hamilton's 992E and 992B.

Isochronism was occasionally improved through the use of a stopworks, a system designed to only allow the mainspring to operate within its center (most consistent) range. The most common method of achieving isochronism is through the use of the Breguet overcoil. which places part of the outermost turn of the hairspring in a different plane from the rest of the spring. This allows the hairspring to "breathe" more evenly and symmetrically. Due to the difficulty with forming an overcoil, modern watches often use a slightly less effective "dogleg", which uses a series of sharp bends to place part of the outermost coil out of the way of the rest of the spring.

Decline in popularity

A pocket watch with an attached compass.

Pocket watches are not common in modern times, having been superseded by wristwatches. Up until about the turn of the 20th century, though, the pocket watch was predominant and the wristwatch was considered feminine and unmanly. In men's fashions, pocket watches began to be superseded by wristwatches around the time of World War I, when officers in the field began to appreciate that a watch worn on the wrist was more easily accessed than one kept in a pocket. A watch of transitional design, combining features of pocket watches and modern wristwatches, was called trench watch or "wristlet". However, pocket watches continued to be widely used in railroading even as their popularity declined elsewhere.

Cell phone occupies a watch pocket

For a few years in the late 1970s and 1980s three-piece suits for men returned to fashion, and this led to small resurgence in pocket watches, as some men actually used the vest pocket for its original purpose. Since then, a few watch companies make pocket watches, and they have their firm adherents. However, in the US men usually have neither vest pocket nor watch pocket, and must carry the pocket watch in a hip pocket. The more recent advent of mobile phones and other gadgets that are worn on the waist has diminished the appeal of carrying an additional item there, especially as such pocketable gadgets usually have timekeeping functionality, hence are pocket watches themselves.

Colibri pocket watch, manufactured mid 1990s. The back case has an extra hinged cover that can be folded out to allow the watch to stand upright on a table.

In some countries a gift of a gold-cased pocket watch is traditionally awarded to an employee upon his retirement.[4]

The pocketwatch has regained popularity due to a sub-genre of cyberpunk known as steampunk, a cultural movement embracing the arts and fashions of the Victorian era, where pocketwatches were nearly ubiquitous.[citation needed]

Watch manufacturers

Popular culture

In film and television, swinging a pocket watch in front of a character's face is commonly expected to induce hypnosis.

On BBC Doctor Who, The Doctor has a pocket watch (Fob watch) and says "It holds the memories of a Time Lord when in human form and when opened it will reinstate the owner to their natural form. (used in episodes "Human Nature" and "Utopia")

In the manga and anime Fullmetal Alchemist, Edward Elric carries a silver pocket watch, which is given to all State Alchemists. He engraves the words "Never Forget 3.Oct.11" inside the cover and seals it shut with alchemy to remind himself of his promise to regain his original body.

References

  1. ^ "Watch, Mechanical", Science and Technology, How It Works, 19 (3rd ed ed.), Marshall Cavendish, 2003, p. 2651, ISBN 0-7614-7333-5  in How it Works, ISBN 0-7614-7314-9 .
  2. ^ Campbell, Gordon (2006), The Grove encyclopedia of decorative arts, 1, Oxford University Press, p. 253, ISBN 0-19-518948-5 .
  3. ^ "Lépine watch", Glossary, Fondation de la Haute horlogerie, http://www.hautehorlogerie.org/glossary/lepine-watch-open-face-343/ .
  4. ^ Van Horn, Carl (2003). Work in America. M–Z. ABC-CLIO. p. 236. ISBN 1-57607-676-8. 

External Links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • pocket watch — watch that a person holds in the pants or suit pocket (usually with a chain attached) …   English contemporary dictionary

  • pocket watch — noun a watch that is carried in a small watch pocket • Hypernyms: ↑watch, ↑ticker …   Useful english dictionary

  • pocket watch — noun A watch carried in the pocket, often with a closing cover and usually attached to a chain …   Wiktionary

  • pocket watch — noun a watch on a chain, intended to be carried in the pocket of a jacket or waistcoat …   English new terms dictionary

  • pocket watch — /ˈpɒkət wɒtʃ/ (say pokuht woch) noun a watch, usually larger than a wristwatch, designed to be carried in a pocket …  

  • Lombo Pocket Watch — is a grey standardbred colt foaled on October 16, 2003. He was bred, and is currently raced by leviathan Western Australian owner Mick Lombardo, and his trained by Cawdor mentor Paul Fitzpatrick, with son Gavin Fitzpatrick the regular driver.… …   Wikipedia

  • Chabiwali Pocket Watch — Movie poster for Chabiwali Pocket Watch. Directed by Vibhu Puri Produced by …   Wikipedia

  • watch pocket — watch′ pock et n. clo a small pocket in a garment, as in a vest, for holding a pocket watch, change, etc Compare fob I, 1) …   From formal English to slang

  • watch — [n1] clock worn on body analog watch, chronometer, digital watch, pocket watch, stopwatch, ticker*, timepiece, timer, wristwatch; concept 463 watch [n2] lookout alertness, attention, awareness, duty, eagle eye*, eye*, gander, guard, hawk, heed,… …   New thesaurus

  • watch chain — n. a chain attached at one end to a pocket watch, with an ornament (or fob) or a fastener at the other end …   English World dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”