- Broadband Internet access
Broadband Internet access, often shortened to just broadband, is high-speed Internet access—typically contrasted with dial-up access over a modem.
Dial-up modems are generally only capable of a maximum
bitrateof 56 kbit/s (kilobits per second) and require the full use of a telephone line—whereas broadband technologies supply at least double this speed and generally without disrupting telephone use.(It should be noted, though, that dial up is not the opposite of broadband, and is used here for practical understanding purposes only.)
Although various minimum speeds have been used in definitions of broadband, ranging up from 64 kbit/s up to 1.0 Mbit/s, the 2006
OECDreport [ [http://www.oecd.org/document/7/0,3343,en_2649_34223_38446855_1_1_1_1,00.html 2006 OECD Broadband Statistics report] ] is typical in counting only download speeds equal to or faster than 256 kbit/s as broadband, and the US FCCcurrently defines broadband as anything above 768 kbit/s [ [http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-280909A2.doc STATEMENT OF CHAIRMAN KEVIN J.MARTIN] ] [ [http://www.engadget.com/2008/03/19/fcc-redefines-broadband-to-mean-768kbps-fast-to-mean-kinda/ FCC redefines "broadband" to mean 768 kbit/s, "fast" to mean "kinda slow"] ]
Speeds are defined in terms of "maximum download" because several common consumer broadband technologies such as
ADSLare "asymmetric"—supporting much slower maximum upload speeds than download.
"Broadband penetration" is now treated as a key
economic indicator. [ [http://www.websiteoptimization.com/bw/0705/ OECD Broadband Report Questioned - US Broadband Penetration Grows to 81.8% Among Active Internet Users - May 2007 Bandwidth Report ] ] [ [http://www.oecd.org/document/7/0,3343,en_2649_34223_38446855_1_1_1_1,00.html OECD Broadband Statistics to December 2006 ] ]
Broadband is often called high-speed Internet, because it usually has a high rate of data transmission. In general, any connection to the customer of 256 kbit/s (0.256 Mbit/s) or more is considered broadband Internet. The
International Telecommunication UnionStandardization Sector ( ITU-T) recommendation I.113 has defined broadband as a transmission capacity that is faster than primary rate ISDN, at 1.5 to 2 Mbit/s. The FCC definition of broadband is 200 kbit/s (0.2 Mbit/s) in one direction, and advanced broadband is at least 200 kbit/s in both directions. The Organization for Economic Co-operation and Development(OECD) has defined broadband as 256 kbit/s in at least one direction and this bit rate is the most common baseline that is marketed as "broadband" around the world. There is no specific bitratedefined by the industry, however, and " broadband" can mean lower-bitrate transmission methods. Some Internet Service Providers (ISPs) use this to their advantage in marketing lower-bitrate connections as broadband.
In practice, the advertised bandwidth is not always reliably available to the customer; ISPs often allow a greater number of subscribers than their backbone connection can handle, under the assumption that most users will not be using their full connection capacity very frequently. This aggregation strategy works more often than not, so users can typically burst to their full bandwidth most of the time; however,
peer-to-peer(P2P) file sharingsystems, often requiring extended durations of high bandwidth, stress these assumptions, and can cause major problems for ISPs who have excessively overbooked their capacity. For more on this topic, see traffic shaping. As takeup for these introductory products increases, telcos are starting to offer higher bit rate services. For existing connections, this most of the time simply involves reconfiguring the existing equipment at each end of the connection.
As the bandwidth delivered to end users increases, the market expects that
video on demandservices streamed over the Internet will become more popular, though at the present time such services generally require specialized networks. The data rates on most broadband services still do not suffice to provide good quality video, as MPEG-2video requires about 6 Mbit/s for good results. Adequate video for some purposes becomes possible at lower data rates, with rates of 768 kbit/s and 384 kbit/s used for some video conferencing applications, and rates as low as 100 kbit/s used for videophones using H.264/MPEG-4 AVC. The MPEG-4format delivers high-quality video at 2 Mbit/s, at the high end of cable modemand ADSL performance.
Increased bandwidth has already made an impact on
newsgroups: postings to groups such as alt.binaries.* have grown from JPEGfiles to entire CD and DVDimages. According to NTL, the level of traffic on their network increased from a daily inbound news feed of 150 gigabytes of data per day and 1 terabyte of data out each day in 2001 to 500 gigabytes of data inbound and over 4 terabytes out each day in 2002.Fact|date=February 2007
The standard broadband technologies in most areas are DSL and
cable modems. Newer technologies in use include VDSLand pushing optical fiberconnections closer to the subscriber in both telephone and cable plants. Fiber-optic communication, while only recently being used in fiber to the premisesand fiber to the curbschemes, has played a crucial role in enabling Broadband Internet access by making transmission of information over larger distances much more cost-effective than copper wire technology.In a few areas not served by cable or ADSL, community organizations have begun to install Wi-Finetworks, and in some cities and towns local governments are installing municipal Wi-Fi networks. As of 2006, high speed mobile Internet access has become available at the consumer level in some countries, using the HSDPAand EV-DO technologies. The newest technology being deployed for mobile and stationary broadband access is WiMAX.
It is possible to roughly double dial-up capability with multilinking technology. What is required are two modems, two phone lines, two dial-up accounts, and ISP support for multilinking, or special software at the user end. This option was popular with some high-end users before ISDN, DSL and other technologies became available.
Diamond and other vendors had created dual phone line modems with bonding capability. The speed of dual line modems is faster than 90 kbit/s. To use this modem, the ISP should support line bonding. The Internet and phone charge will be twice the ordinary dial-up charge.
Load balancing takes two internet connections and feeds them into your network as one double speed, more resilient internet connection. By choosing two independent internet providers the load balancing hardware will automatically use the line with least load which means should one line fail, the second one automatically takes up the slack.
Integrated Service Digital Network (
ISDN) is one of the oldest high-speed digital access methods for consumers and businesses to connect to the Internet. It is a telephone data service standard. Its use in the United States peaked in the late 1990s prior to the availability of DSLand cable modem technologies. Broadband service is usually compared to ISDN-BRI because this was the standard high-speed access technology that formed a baseline for the challenges faced by the early broadband providers. These providers sought to compete against ISDN by offering faster and cheaper services to consumers.
A basic rate
ISDNline (known as ISDN-BRI) is an ISDN line with 2 data "bearer" channels (DS0 - 64 kbit/s each). Using ISDN terminal adapters (erroneously called modems), it is possible to bond together 2 or more separate ISDN-BRI lines to reach speeds of 256 kbit/s or more. The ISDN channel bonding technology has been used for video conference applications and high-speed data transmission.
Primary rate ISDN, known as ISDN-PRI, is an ISDN line with 23 DS0 channels and total speed of 1,544 kbit/s (US standard). ISDN E1 (European standard) line is an ISDN lines with 30 DS0 channels and total speed of 2,048 kbit/s. Because ISDN is a telephone-based product, a lot of the terminology and physical aspects of the line are shared by the ISDN-PRI used for voice services. An ISDN line can therefore be "provisioned" for voice or data and many different options, depending on the equipment being used at any particular installation, and depending on the offerings of the telephone company's
central officeswitch. Most ISDN-PRI's are used for telephone voice communication using large PBX systems, rather than for data. One obvious exception is that ISPs usually have ISDN-PRI's for handling ISDN data and modem calls.
It is mainly of historical interest that many of the earlier ISDN data lines used 56 kbit/s rather than 64 kbit/s "B" channels of data. This caused ISDN-BRI to be offered at both 128 kbit/s and 112 kbit/s rates, depending on the central office's switching equipment.
# Constant data speed at 64 kbit/s for each DS0 channel.
# Two way high speed symmetric data transmission, unlike
# One of the data channels can be used for phone conversation without disturbing the data transmission through the other data channel. When a phone call is ended, the bearer channel can immediately dial and re-connect itself to the data call.
# Call setup is very quick.
# Low latency
# ISDN Voice clarity is unmatched by other phone services.
Caller IDis almost always available for no additional fee.
# Maximum distance from the
central officeis much greater than it is for DSL.
# When using ISDN-BRI, there is the possibility of using the low-bandwidth 16 kbit/s "D" channel for packet data and for always on capabilities.
# ISDN offerings are dwindling in the marketplace due to the widespread use of faster and cheaper alternatives.
# ISDN routers, terminal adapters ("modems"), and telephones are more expensive than ordinary
POTSequipment, like dial-up modems.
provisioningcan be complicated due to the great number of options available.
# ISDN users must dial in to a provider that offers ISDN Internet service, which means that the call could be disconnected.
# ISDN is billed as a phone line, to which is added the bill for Internet ISDN access.
# "Always on" data connections are not available in all locations.
# Some telephone companies charge unusual fees for ISDN, including call setup fees, per minute fees, and higher rates than normal for other services.
These are highly-regulated services traditionally intended for businesses, that are managed through
Public Service Commissions (PSCs) in each state, must be fully defined in PSC tariff documents, and have management rules dating back to the early 1980s which still refer to teletypesas potential connection devices. As such, T-1 services have very strict and rigid service requirements which drive up the provider's maintenance costs and may require them to have a technician on standby 24 hours a day to repair the line if it malfunctions. (In comparison, ISDN and DSL are not regulated by the PSCs at all.) Due to the expensive and regulated nature of T-1 lines, they are normally installed under the provisions of a written agreement, the contract term being typically one to three years. However, there are usually few restrictions to an end-user's use of a T-1, uptimeand bandwidth speed may be guaranteed, quality of servicemay be supported, and blocks of static IPaddresses are commonly included.
Since a T-1 was originally conceived for voice transmission, and voice T-1's are still widely used in businesses, it can be confusing to the uninitiated subscriber. It is often best to refer to the type of T-1 being considered, using the appropriate "data" or "voice" prefix to differentiate between the two. A voice T-1 would terminate at a phone company's
central office(CO) for connection to the PSTN; a data T-1 terminates at a point of presence(POP) or data center. The T-1 line which is between a customer's premises and the POP or CO is called the local loop. The owner of the local loop need not be the owner of the network at the POP where your T-1 connects to the Internet, and so a T-1 subscriber may have contracts with these two organizations separately.
The nomenclature for a T-1 varies widely, cited in some circles a DS-1, a T1.5, a T1, or a DS1. Some of these try to distinguish amongst the different aspects of the line, considering the data standard a DS-1, and the physical structure of the
trunk linea T-1 or T-1.5. They are also called " leased lines", but that terminology is usually for data speeds under 1.5 Mbit/s. At times, a T-1 can be included in the term " leased line" or excluded from it. Whatever it is called, it is inherently related to other high-speed access methods, which include T-3, SONET OC-3, and other T-carrierand Optical Carriers. Additionally, a T-1 might be aggregated with more than one T-1, producing an nxT-1, such as 4xT-1 which has exactly 4 times the bandwidth of a T-1.
When a T-1 is installed, there are a number of choices to be made: in the carrier chosen, the location of the
demarcation point, the type of channel service unit(CSU) or data service unit(DSU) used, the WAN IP routerused, the types of speeds chosen, etc. Specialized WAN routersare used with T-1 lines that route Internet or VPNdata onto the T-1 line from the subscriber's packet-based ( TCP/IP) network using customer premises equipment(CPE). The CPE typical consists of a CSU/DSU that converts the DS-1 data stream of the T-1 to a TCP/IPpacket data stream for use in the customer's Ethernet LAN. It is noteworthy that many T-1 providers optionally maintain and/or sell the CPE as part of the service contract, which can affect the demarcation point and the ownership of the router, CSU, or DSU.
Although a T-1 has a maximum of 1.544 Mbit/s, a fractional T-1 might be offered which only uses an integer multiple of 128 kbit/s for bandwidth. In this manner, a customer might only purchase 1/12th or 1/3 of a T-1, which would be 128 kbit/s and 512 kbit/s, respectively.
T-1 and fractional T-1 data lines are
symmetric, meaning that their upload and download speeds are the same.
Where available, this method of broadband connection to the Internet would indicate that the Internet access is very fast. However, just because
Ethernetis offered doesn't mean that the full 10, 100, or 1000 Mbit/s connection is able to be utilized for direct Internet access. In a college dormitory for example, the 100 Mbit/s Ethernet access might be fully available to on-campus networks, but Internet access speeds might be closer to 4xT-1 speed (6 Mbit/s). If you are sharing a broadband connection with others in a building, the access speed of the leased lineinto the building would of course govern the end-user's speed.
However, in certain locations, true Ethernet broadband access might be available. This would most commonly be the case at a POP or a
data center, and not at a typical residence or business. When Ethernet Internet access is offered, it could be fiber-opticor copper twisted pair, and the speed will conform to standard Ethernet speeds of up to 10 Gbit/s. The primary advantage is that no special hardware is needed for Ethernet. Ethernet also has a very low latency.
One of the great challenges of broadband is to provide service to potential customers in areas of low
population density, such as to farmers and ranchers. In cities where the population density is high, it is easy for a service provider to recover equipment costs, but each rural customer may require expensive equipment to get connected.
Several rural broadband solutions exist, though each has its own pitfalls and limitations. Some choices are better than others, but are dependent on how proactive the local phone company is about upgrading their rural technology.
Wireless Internet Service Provider(WISPs) are rapidly becoming a popular broadband option for rural areas.
This employs a
satellitein geostationary orbitto relay data from the satellite company to each customer. Satellite Internet is usually among the most expensive ways of gaining broadband Internet access, but in rural areas it may only compete with cellular broadband. However, costs have been coming down in recent years to the point that it is becoming more competitive with other high-speed options.
Satellite Internet also has a high latency problem caused by the signal having to travel 35,000 km (22,000 miles) out into space to the satellite and back to Earth again. The signal delay can be as much as 500
milliseconds to 900 milliseconds, which makes this service unsuitable for applications requiring real-time user input such as certain multiplayerInternet games and first-person shootersplayed over the connection. Despite this, it is still possible for many games to be played, but the scope is limited to real-time strategyor turn-basedgames. The functionality of live interactiveaccess to a distant computer can also be subject to the problems caused by high latency. These problems are more than tolerable for just basic email access and web browsing and in most cases are barely noticeable.
There is no simple way to get around this problem. The delay is primarily due to the
speed of lightbeing only 300,000 km/second (186,000 miles per second). Even if all other signaling delays could be eliminated it still takes the electromagnetic wave 233 milliseconds to travel from ground to the satellite and back to the ground, a total of 70,000 km (44,000 miles) to travel from the user to the satellite company.
Since the satellite is usually being used for two-way communications, the total distance increases to 140,000 km (88,000 miles), which takes a radio wave 466 ms to travel. Factoring in normal delays from other network sources gives a typical connection latency of 500-700 ms. This is far worse latency than even most dial-up modem users' experience, at typically only 150-200 ms total latency.
Most satellite Internet providers also have a FAP (
Fair Access Policy). Perhaps one of the largest disadvantages of satellite Internet, these FAPs usually throttle a user's throughput to dial-up speeds after a certain "invisible wall" is hit (usually around 200 MB a day). This FAP usually lasts for 24 hours after the wall is hit, and a user's throughput is restored to whatever tier they paid for. This makes bandwidth-intensive activities nearly impossible to complete in a reasonable amount of time (examples include P2P and newsgroupbinary downloading).
# True global broadband Internet access availability
# Mobile connection to the Internet (with some providers)
# High latency compared to other broadband services, especially 2-way satellite service
# Unreliable: drop-outs are common during travel, inclement weather, and during sunspot activity
# The narrow-beam highly directional antenna must be accurately pointed to the satellite orbiting overhead
# The Fair Access Policy limits heavy usage, if applied by the service provider
VPNuse is discouraged, problematic, and/or restricted with satellite broadband, although available at a price
# One-way satellite service requires the use of a modem or other data uplink connection
Satellite dishesare very large. Although most of them employ plastic to reduce weight, they are typically between 80 and 120 cm (30 to 48 inches) in diameter.
Cellular phonetowers are very widespread, and as cellular networks move to third generation ( 3G) networks they can support fast data; using technologies such as EVDO, HSDPAand UMTS.
These can give broadband access to the Internet, with a cell phone, with
Cardbus, ExpressCard, or USBcellular modems, or with cellular broadband routers, which allow more than one computer to be connected to the Internet using one cellular connection.
# The only broadband connection available on many cell phones and PDAs
# Mobile wireless connection to the Internet
# Available in all
metropolitan areas, most large cities, and along major highways. (See a [http://evdomaps.com/ map] )
# No need to aim an antenna in most cases
# The antenna is extremely small compared to a satellite dish
# Low latency compared to
# Higher availability than
# A traveler who already has cellular broadband will not need to pay different
WiFiHot Spot providers for access.
# Unreliable: drop-outs are common during travel and during inclement weather
# Not a truly nationwide service
# Speed can vary widely throughout the day, sometimes falling well below the 400 kbit/s target during peak times.
# Asymmetric service: the
uploadrate is always much slower than the downloadrate.
# High latency compared to DSL and Cable broadband services.
# Often more costly compared to other methods
This is a new service still in its infancy that may eventually permit broadband Internet data to travel down standard high-voltage power lines. However, the system has a number of complex issues, the primary one being that power lines are inherently a very noisy environment. Every time a device turns on or off, it introduces a pop or click into the line. Energy-saving devices often introduce noisy
harmonicsinto the line. The system must be designed to deal with these natural signaling disruptions and work around them.
Broadband over power lines (BPL), also known as
Power line communication, has developed faster in Europe than in the US due toa historical difference in power system design philosophies. Nearly all large power grids transmit power at high voltages in order to reduce transmission losses, then near the customer use step-down transformers to reduce the voltage. Since BPL signals cannot readily pass through transformers, repeaters must be attached to the transformers. In the US, it is common for a small transformer hung from a utility pole to service a single house. In Europe, it is more common for a somewhat larger transformer to service 10 or 100 houses. For delivering power to customers, this difference in design makes little difference, but it means delivering BPL over the power grid of a typical US city will require an order of magnitude more repeaters than would be required in a comparable European city.
The second major issue is
signal strengthand operating frequency. The system is expected to use frequencies in the 10 to 30 MHz range, which has been used for decades by licensed amateur radio operators, as well as international shortwavebroadcasters and a variety of communications systems (military, aeronautical, etc.). Power lines are unshielded and will act as transmitters for the signals they carry, and have the potential to completely wipe out the usefulness of the 10 to 30 MHz range for shortwavecommunications purposes.
This typically employs the current low-cost 802.11
Wi-Firadio systems to link up remote locations over great distances, but can use other higher-power radio communications systems as well.
Traditional 802.11b was licensed for omnidirectional service spanning only 100-150 meters (300-500 ft). By focusing the signal down to a narrow beam with a
Yagi antennait can instead operate reliably over a distance of many miles.
Rural Wireless-ISP installations are typically not commercial in nature and are instead a patchwork of systems built up by hobbyists mounting antennas on
radio masts and towers, agricultural storage silos, very tall trees, or whatever other tall objects are available. There are currently a number of companies that provide this service. A [http://map.wirelessinternetcoverage.com/ wireless Internet access provider] map for USA is publicly available for WISPS.
iBlast was the brand name for a theoretical high-speed (7 Mbit/s), one-way digital data transmission technology from Digital TV station to users that was developed between June 2000 to October 2005.
# Low cost, high speed data transmission from TV station to users. This technology can be used for transmitting website / files from Internet.
# One way data transmission and should be combined with other method of data transmission from users to TV station.
# Lack of 8VSB tuner built into many consumer electronic devices needed to receive the iBlast signal.
In the end, the disadvantages outweighed the advantages and the glut of fiberoptic capacity that ensued following the collapse of the Internet bubble drove the cost of transmission so low that an ancillary service such as this was unnecessary, and the company folded at the end of 2005. The partner television stations as well as over 500 additional television stations not part of the iBlast Network continue to transmit separate digital signals as mandated by the Telecommunications Act of 1996.
WorldSpaceis a digital satellite radio network based in Washington DC. It covers most of Asia and Europe plus all of Africa by satellite. Beside the digital audio, users can receive one way high speed digital data transmission (150 Kilobit/second) from the satellite.
# Low cost (US$ 100) receiver that combines a digital radio receiver and a data receiver. This technology can be used for transmitting websites / files from Internet.
# Access from remote places in Asia and Africa.
# One way data transmission and should be combined with other method of data transmission from users to Worldspace HQ,
Traditionally, ISPs have used an "all you can eat" or
flat ratemodel, with pricing determined by the maximum bitratechosen by the customer. However the use of high bandwidth applications is increasing rapidly, with increased consumer demand for streaming content such as video on demand, as well as peer-to-peer file sharing.
For ISPs who are bandwidth limited, the "all you can eat" model may become unsustainable as demand for bandwidth increases.
Fixed costsrepresent 80-90% of the cost of providing broadband service, and although most ISPs keep their cost secret, the total cost (January 2008) is estimated to be about $0.10 per gigabyte. Currently some ISPs estimate that about 5% of users consume about 50% of the total bandwidth [http://bits.blogs.nytimes.com/2008/01/17/time-warner-download-too-much-and-you-might-pay-30-a-movie/?ref=technology] .
Some ISPs have begun experimenting with usage-based pricing, notably a
Time Warnertest in Beaumont, Texas. Bell Canadahas imposed bandwidth caps on customers, with pricing ranging from $1 to $7.50 per gigabyte for usage over certain limits. For comparison, note that a typical standard-definition movie is 700MB-1.2GB, while a high-definition movie is 6GB-12GB. This could conceivably result in a charge of $90 to view a movie.
An often overlooked analysis when choosing an internet provider is comparing the different DSL and cable internet services at the plan level. Doing so will ensure that consumers do not overpay for speed they will not utilize. While this comparison can be cumbersome, there are resources like http://highspeed-internet-providers.com that assist in the decision making process.
List of device bandwidths
Public switched telephone network(PSTN)
Back-channel, a low-speed, or less-than-optimal, transmission channel in the opposite direction to the main channel
* Digital Subscriber Line (DSL), digital data transmission over the wires used in the local loop of a telephone network
Local Multipoint Distribution Service, broadband wireless access technology that uses microwave signals operating between the 26 GHz and 29 GHz bands
WiMAX, a standards-based wireless technology that provides high-throughput broadband connections over long distances
Power line communication, wireline technology using the current electricity networks
Satellite Internet access
Cable modem, designed to modulate a data signal over cable television infrastructure
Fiber to the premises, based on fiber-optic cables and associated optical electronics
High-Speed Downlink Packet Access(HSDPA), a new mobile telephony protocol, sometimes referred to as a 3.5G (or "3½G") technology
Evolution-Data Optimized(EVDO), is a wireless radio broadband data standard adopted by many CDMA mobile phone service providers
Future broadband implementations
White Spaces Coalitiona group of technology companies aiming to deliver broadband internet access via unused analog television frequencies
High-Speed Downlink Packet Access
List of countries by broadband users
* [http://www.alternet.org/story/22216/ Corporate vs. Community Internet] ,
AlterNet, June 14, 2005, - on the clash between US cities' attempts to expand municipal broadbandand corporate attempts to defend their markets
Wikimedia Foundation. 2010.
Look at other dictionaries:
Broadband open access — is an issue of policy debate in telecommunications, regarding whether or not companies which own broadband telecommunication infrastructure (such as cable operators) should be required to provide access to their facilities for competing… … Wikipedia
Broadband Wireless Access — Unter Broadband Wireless Access (BWA) versteht man den drahtlosen Breitbandanschluss an ein Fernmeldenetz zum Beispiel für den Zugang zum Internet. BWA ist eine allgemeine Bezeichnung für verschiedene drahtlose Zugangstechnologien wie WLL… … Deutsch Wikipedia
Internet access — Main article: Internet See also: Broadband Internet access Many technologies and service plans for Internet access allow customers to connect to the Internet. Consumer use first became popular through dial up connections in the 20th century. By… … Wikipedia
Broadband Remote Access Server — A broadband remote access server (BRAS or BBRAS) routes traffic to and from the digital subscriber line access multiplexers (DSLAM) on an Internet service provider s (ISP) network.The BRAS sits at the core of an ISP s network, and aggregates user … Wikipedia
Broadband Remote Access Server — Mit Broadband Remote Access Server (BRAS) oder auch Breitband PoP (Point of Presence) werden Netzelemente von Breitband Netzen wie DSL und UMTS bezeichnet. Sie sind Teil des Netzwerks eines Internet Service Providers (ISP) und speisen den… … Deutsch Wikipedia
Internet access program — An internet access program is a software program, generally included as part of the operating system, to access the Internet.There are two main ways to access the Net. * Dial up access; that generally uses a narrowband modem. * Network access;… … Wikipedia
Satellite Internet access — Satellite Internet services are used in locations where terrestrial Internet access is not available and in locations which move frequently. Internet access via satellite is available worldwide, including vessels at sea and mobile land… … Wikipedia
MSN Internet Access — was Microsoft Windows default ISP. MSN was provided by Bell Sympatico, and has been included in older Windows editions (9x, Me) to easily create and connect with dial up or broadband using a modem.MSN Internet Access is now dubbed as MSN 9 Dial… … Wikipedia
Dial-up Internet access — is a form of Internet access that uses the facilities of the public switched telephone network (PSTN) to establish a dialled connection to an Internet service provider (ISP) via telephone lines. The user s computer or router uses an attached… … Wikipedia
Dial-up internet access — is a form of Internet access via telephone lines. [cite web |url=http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito doc/dialup.htm |title=Dial Up Technologies |accessdate=2008 02 18 |work=Cisco Documentation |publisher=Cisco Systems, Inc.] The… … Wikipedia