Denver and Salt Lake Railway


Denver and Salt Lake Railway
Denver and Salt Lake Railway
Logo
Reporting mark D&SL
Locale Colorado
Dates of operation 1902–1947
Track gauge 4 ft 8 12 in (1,435 mm) (standard gauge)
Headquarters Denver

The Denver, Northwestern and Pacific Railway was a U.S. railroad company incorporated on July 18, 1902, by David H. Moffat, Walter S. Cheesman, William Gray Evans, Charles J. Hughes, Jr., George E. Ross-Lewin, S.M. Perry and Frank P. Gibson. After Denver was bypassed by the Union Pacific line, which passed through Cheyenne, Wyoming, and by the Denver and Rio Grande Western Railroad (D&RGW), which was routed through Pueblo, Colorado, and ran west through Royal Gorge, the Denver business community wanted an "Air Line" west of the city. The Denver, Northwestern and Pacific Railway was going to be that "Air Line", originating in Denver, and was planned to terminate in Salt Lake City, Utah. Although the line was never completed as a separate route to Salt Lake City, the line was eventually connected with the D&RGW's main near Dotsero and used to shorten their route between Salt Lake City and Denver. The line initially featured an arduous grade over Rollins Pass. After the pass was bypassed by the Moffat Tunnel, the line became known as the Moffat Tunnel Route.

DNW&P was placed in receivership on May 2, 1912, and on April 30, 1913, was reformed as the Denver and Salt Lake Railroad, and finally the Denver and Salt Lake Railway (reporting mark D&SL) in 1926. Most of the line is in use today as part of the Union Pacific's Central Corridor.

Contents

History

David H. Moffat

David H. Moffat and his business associates established the Denver, Northwestern and Pacific Railway. It originated in Denver, and was planned to terminate in Salt Lake City, Utah. Construction began on December 18, 1902. The DN&P started north up the Front Range of the Rockies towards Boulder. This ascent to the point where the line turned west, is a great example of exceptional mountain railroad surveying. Chief Engineer H.A. Sumner needing to enter South Boulder Canyon as high as possible, did not want more than a 2 percent grade. To do this, he laid out a highly efficient route to gain the necessary altitude that features the now famous Big Ten Curve. The climb to the Continental Divide required 33 tunnels that were several hundred feet long. The tracks did not reach the western end of the Tolland area until 1903. Once completed, the 33 tunnels between Denver and Tolland are closer together than any other tunnels on any other line in the United States. Rollins Pass was next over the divide at Corona, at an elevation 11,680 feet (3,560 m), and then the line went down the western face of the divide. Originally, Moffat had planned to build a tunnel through the worst part of the pass, but his original plans failed. Instead, the DNW&P tracks climbed Rollins Pass with a series of switch back loops requiring steep grades and experiencing severe snow conditions. The line over the pass was 23 miles (37 km) long, with a 4 percent grade along many stretches, and was the highest railroad ever constructed in North America. A small rail stop called Corona was established at the top of the pass, with a restaurant and lodging, which allowed workers to help keep the rail line free of snow in the winter. Trains were often stranded for several days during heavy winter snows. Removing snow from the original line went on to make it unprofitable to operate.

The line was complete all the way to Arrow by the winter of 1904. In the spring of 1905, the tracks were completed all the way to Fraser. From there, the tracks went through Tabernash, Granby, Hot Sulphur Springs, Byers Canyon and then Parshall, which is at the mouth of Williams Fork canyon. The town of Kremmling, Colorado, was finally reached in July 1906. The tracks then went West through the Gore Canyon past Radium, finally connecting at State Bridge to North-South tracks. These tracks did not reach Steamboat Springs until the winter of 1909.

Moffat died on March 18, 1911, in New York City at the age of 73. The DN&P had cost him $75,000 a mile, and Rollins Pass had cost him the rest of his fortune, a total of $14 million dollars. He was in New York City trying to raise more money for the railroad, and was stopped by what would later be learned was the doing of E. H. Harriman and George Jay Gould I.

DNW&P was placed in receivership on May 2, 1912, and on April 30, 1913, was reformed as the Denver and Salt Lake Railroad, though it went bankrupt before reaching Salt Lake City. By 1913 the tracks through Steamboat Springs had reached Craig in Moffat County, Colorado, towards the Colorado-Utah border. At its final terminus, it was less than half the distance toward its goal of Salt Lake City, Utah.

Moffat Tunnel

Moffat Tunnel cuts through the Continental Divide in north-central Colorado. It finally provided Denver a western link through the Divide as both Cheyenne to the north and Pueblo (Colo.) to the south enjoyed rail access to the West. This 6.2-mile (10.0 km) long bore is 9,239 feet (2,816 m) above sea level at its apex. Fifty miles west of Denver is the East Portal in the Front Range. Moffat Tunnel follows the right-of-way laid out by Moffat back in 1902. The railroad tunnel was 'holed' through on July 7, 1927, and formally turned over completed to the D&SL on February 26, 1928. Railroad connections through the tunnel shortened the distance between Denver and the Pacific coast by 176 miles (283 km).

Dotsero Cutoff

The Denver and Salt Lake Railroad was reorganized as the Denver and Salt Lake Railway in 1926. In 1931, the Denver and Rio Grande Western Railroad acquired the Denver and Salt Lake Western Railroad (a company in name only) subsidiary of the Denver and Salt Lake Railroad (D&SL) which had acquired the rights to build a 40-mile (64-km) connection between the two railroads. After years of negotiation the D&RGW gained trackage rights on the D&SL from Denver to the new cutoff. In 1932, the D&RGW began construction of the Dotsero Cutoff east of Glenwood Springs to near Bond on the Colorado River, at a location called Orestod (Dotsero spelled backward). Despite the common misconception that Dotsero is a shortening of "Dot Zero," the station name exists from the construction of the Standard Gauge line to Glenwood Springs in the 1890s. Construction completed in 1934 giving Denver a directed transcontinental link to the west. The D&RGW though slipped again into bankruptcy in 1935. Emerging in 1947 it merged with the D&SL on 3 March 1947 gaining control of the "Moffat Road" through the Moffat Tunnel and a branch line from Bond to Craig, Colorado.

Legacy

Although Moffat was looked at the time as a vain dreamer, he would later be looked at by many as ahead of his time. His legacy would leave Denver and Rio Grande Western Railroad and later Union Pacific with a railroad that would outlast most other rail lines in Colorado. Other than the Rollins Pass part, all of the railroad is in use today as part of the Central Corridor, and the Denver to Phippsburg part is called Moffat Tunnel Subdivision.

References

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Denver and Salt Lake Railway — Le Denver and Salt Lake Railway (sigle de l AAR: D SL) était un chemin de fer américain de classe I, en opération dans le Colorado. Il fut créé en 1902 par David Moffat sous le nom de Denver, Northwestern and Pacific Railway pour relier Denver,… …   Wikipédia en Français

  • Denver and Salt Lake Railway — Die Denver and Salt Lake Railway war eine Bahngesellschaft in den USA. Sie geht auf die Denver, Northwestern and Pacific Railway (DNW P) zurück, die am 18. Juli 1902 von David Moffat, Walter S. Cheesman, William G. Evans, Charles J. Hughes, Jr.,… …   Deutsch Wikipedia

  • Denver and Rio Grande Western Railroad — Le Denver and Rio Grande Western Railroad (sigle AAR: DRGW), généralement appelé Rio Grande, était un chemin de fer américain de classe I qui débuta sa carrière sous le nom de Denver and Rio Grande Railroad en 1870. Sa ligne à écartement étroit… …   Wikipédia en Français

  • Denver and Rio Grande Western Railroad — For the 1952 film, see Denver and Rio Grande (film). Denver and Rio Grande Western Railroad …   Wikipedia

  • Denver and Rio Grande Western Railroad — Die Denver Rio Grande Western Railroad, abgekürzt D RGW, war eine der ältesten Bahngesellschaften im Westen der USA. Schon Ende des 19. Jahrhunderts baute die 1870 als Denver Rio Grande Railway gegründete Gesellschaft schmalspurige… …   Deutsch Wikipedia

  • Denver and Rio Grande Western Railroad Company — ▪ American railway byname  Rio Grande         former American railroad chartered in 1870 as the Denver and Rio Grande Railway (D&RG). It began with a narrow gauge line extending from Denver, Colorado, south to New Mexico and west to Salt Lake… …   Universalium

  • Denver and Rio Grande Western Depot (Salt Lake City) — Denver and Rio Grande Railroad Station U.S. National Register of Historic Places …   Wikipedia

  • Salt Lake City Southern Railroad — Infobox SG rail railroad name=Salt Lake City Southern Railroad logo filename= logo size= old gauge= marks=SL locale=Salt Lake City, Utah start year=April 19 1993 end year=Present hq city=Murray, UtahThe Salt Lake City Southern Railroad reporting… …   Wikipedia

  • Greeley, Salt Lake and Pacific Railway — The Greeley, Salt Lake and Pacific Railway was a railroad that operated in northern Colorado in the United States during the 1880s. Founded with heavy backing with the Union Pacific Railroad, it was controlled by the Union Pacific from its… …   Wikipedia

  • Denver & Rio Grande Western Railroad — Die Denver Rio Grande Western Railroad, abgekürzt D RGW, war eine der ältesten Bahngesellschaften im Westen der USA. Schon Ende des 19. Jahrhunderts baute die 1870 als Denver Rio Grande Railway gegründete Gesellschaft schmalspurige… …   Deutsch Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.