- Narrow gauge lines of the Victorian Railways
The former Victorian Railways, the state railway authority in Victoria, Australia built a number of experimental 2 ft 6 in (762 mm) narrow gauge railway lines around the beginning of the 20th century. Although all were closed by the early 1960s, parts of two have been reopened as heritage railways.
- 1 Background
- 2 Right of way and safeworking
- 3 Locomotives and rolling stock
- 4 Lines
- 5 Welshpool to Port Welshpool horse-drawn tram
- 6 References
- 7 External links
A depression in the early 1890s brought a halt to the rapid expansion of railways in Victoria. Politicians promoted narrow gauge lines as a way to link remote communities, particularly in hilly country, without the expense of the 5 ft 3 in (1,600 mm) broad gauge railways. Railways officials opposed them, citing the inconvenience and expense of a break-of-gauge. A parliamentary committee eventually identified 14 possible locations for narrow gauge railways, and recommended that four experimental lines be built. They were:
- Lilydale – Warburton
- Wangaratta – Whitfield
- Upper Ferntree Gully – Gembrook
- Colac – Beech Forest
The Warburton line was built in broad gauge, however authority was given for the construction of the other three lines. Subsequently, a further two lines were built, the Moe to Walhalla line, and an extension from Beech Forest to Crowes. At various times other lines and extensions were proposed, but none came to anything.
Initial plans were for the railways to be constructed in 2 ft (610 mm) gauge, but following correspondence with British railway engineer Everard Calthrop, amongst others, a change was made to 2 ft 6 in (762 mm) gauge.
None of the lines constructed ever made a profit. Freight rates were the same for broad and narrow gauge railways, despite higher direct costs. Most of the loadings were goods such as timber, potatoes and lime, which were charged at a low rate. Most freight was outbound, so many trains travelled towards the terminals almost empty. And despite originating the traffic, the lines were only credited with a portion of the freight charge. The amount credited to the lines did not cover the cost of running trains, and the more traffic the larger the loss. However, particularly in the 1920s, the traffic generated by the narrow gauge lines was appreciated by the railways and the lines survived for up to 60 years before closure.
Right of way and safeworking
A number of studies were made of overseas narrow-gauge railways such as the Darjeeling Himalayan Railway in India and the Ffestiniog railway in Wales. An initial decision to build the lines in 2 ft (610 mm) gauge was changed to 2 ft 6 in (762 mm) gauge for the Victorian lines. This gauge was being adopted on other lines in the British Empire at this time, such as the Kalka-Shimla Railway and the Sierra Leone Government Railway. The railways were constructed using 60 lb/yd (29.8 kg/m) rail, initially obtained from broad gauge lines that were being upgraded. A maximum grade of 1 in 30 (3.33%) was adopted, while the minimum radius of curves was 2 chains i.e. 132 feet (40 m).
Locomotives and rolling stock
Seventeen 2-6-2 tank locomotives and two Garratt locomotives, plus a range of passenger and goods vehicles, were built to operate on the narrow gauge lines. Six of the locomotives, including one of the Garratt locomotives, as well as at least one example of each type of rolling stock, have been restored to working order on the Puffing Billy Railway.
Apart from light maintenance that could be done locally, the locomotives and rolling stock were maintained at the Victorian Railways' Newport Workshops in the suburbs of Melbourne, requiring the transport of the vehicles by broad-gauge flat wagons. The locomotives and other vehicles would be moved around the various narrow-gauge lines as appropriate, so that no equipment was dedicated to particular lines. However the G class Garratts were only used on the Crowes and Walhalla lines, while the NBH excursion coaches remained on the Gembrook line while that line was in operation.
Baldwin Locomotive Works in the United States supplied the first two 2-6-2 tank locomotives, as well as parts for a further two locos. One each of the supplied locos and the parts kits was a simple loco, and the other a compound. The new class was classed "A", however confusion with the broad gauge A, AA and A2 classes lead to them being referred to as Narrow-gauge A class for a short while followed by a prefix "N" being applied to written records, making it the NA class. The Victorian Railways Newport Workshops assembled the parts to give an additional two locos, and subsequently built a further 13 of the simple cylinder version. The last one, number 17, was built in 1915.
The locomotives weigh 36 long tons (36.6 t; 40.3 ST) and produce a tractive effort of 12,170 pounds-force (54 kN), allowing them to haul loads of 90 long tons (91.4 t; 100.8 ST) up grades of 1 in 30 (3.33%). Nos. 6, 7, 8, 12, and 14 have been restored and operate on the Puffing Billy Railway, and No. 3 is also on the Puffing Billy Railway, awaiting eventual restoration. The remaining locomotives have all been scrapped.
By the mid 1920s, traffic was growing with up to 7 trains a day on the Beech Forest line. To decrease train mileage and therefore costs, two G class Garratt locomotives were purchased from Beyer-Peacock in England. Weighing 69 tons (70.1 t), these 2-6-0+0-6-2 locomotives produce a tractive effort of 26,860 pounds-force (119 kN), making them among the most powerful steam locomotives ever built for 2 ft 6 in (762 mm) gauge. They were designated as the "G" class and given the numbers 41 and 42, and entered service in 1926. G41 spent its entire life on the Crowes line, whilst G42 was originally allocated to the Walhalla line, then transferred to the Crowes line, and is currently running on the Puffing Billy Railway. G41 was scrapped, after having been extensively cannibalised for parts to keep G42 running in the last years of the Crowes line.
A range of passenger and goods vehicles were also built at Newport or by contractors. While most Victorian Railways broad gauge goods vehicles of the time were 4 wheel wagons, all the narrow gauge rolling stock were bogie vehicles and most were built on a standard underframe.
The initial stock were all built on a 27 ft 4 in (8,331 mm) long underframe, with the coaches being the open saloon type with balconies for end loading. Various vans were supplied together with stock cars, but the predominant goods vehicle was the NQR class open truck, of which 218 were eventually supplied. Later some 31 ft 4 in (9,550 mm) side opening coaches were built to cope with increasing traffic. A number of simple open-sided coaches were also provided for excursion traffic on the Gembrook line.
Wangaratta to Whitfield
The first line, from Wangaratta to Whitfield, was unlike the other lines in that it was built through mostly flat, open, agricultural country, following the King River. The 30.5-mile (49.1 km) line was built as a narrow-gauge line because it was thought that it might be extended into the mountainous country to the south, but this extension never happened. The line was opened in March 1899, and was the first line to close, in October 1953. The line relied mostly on local agricultural traffic, and opened with a daily mixed train. By the 1930s this had been reduced to a weekly goods service, and stayed at this level until the railway closed. There was only one lineside industry, a dairy at Moyhu, and the majority of stations were nameboards at road crossings.
List of stations
- Wangaratta (Junction station with broad gauge.)
- King Valley
Upper Ferntree Gully to Gembrook
The 18-mile (29 km) Gembrook line opened in December 1900, through the southern foothills of the Dandenong Ranges just east of Melbourne. It was closed in 1954 following a landslide between Selby and Menzies Creek, but continued to operate tourist services for the Puffing Billy Preservation Society over the remaining usable section of the line to Belgrave. However, this came to an end in 1958 when the line was closed to allow conversion to a broad gauge electric line as an extension of the suburban railway system of Melbourne. Through the efforts of the Puffing Billy Preservation Society, the landslide was bypassed and the remainder of the line from Belgrave to Gembrook has been restored and operates daily for tourists. The railway is now administered by the Emerald Tourist Railway Board.
The Gembrook line always had a higher passenger loading than the other lines. The junction station of Upper Ferntree Gully was a terminus for the Melbourne suburban rail system, so the line was popular with weekend visitors from Melbourne. Fifteen special excursion coaches classed NBH were built to cater for this traffic. Travelling through a region with rich soils and high rainfall, agricultural products such as potatoes formed much of the freight traffic. Nobelius Nurseries over the years dispatched thousands of fruit trees from a packing shed located on Nobelius siding, between Emerald and Nobelius stations. Sawn timber was also important, and sidings were located at Gembrook to serve several private 3 ft (914 mm) and 3 ft 6 in (1,067 mm) gauge tramways that brought timber down from further up the mountains.
List of stations
- Upper Ferntree Gully (Junction station with broad gauge.)
- Menzies Creek
- Lakeside (Emerald Lake)
Colac to Beech Forest and Crowes
The third line to open was in the Otway Ranges in southwest Victoria. The line from Colac to Beech Forest opened in March 1902, and it was extended to Crowes in June 1911. Nearly 44 miles (70.8 km) long, this was the longest of the narrow gauge lines. It was also the last to close, finally succumbing in June 1962, although the line had been truncated in 1954.
Both the Colac and Crowes lines entered Beech Forest yard from the same end, creating a junction. Trains had to be turned to run down the Crowes branch and a balloon loop was provided at the other end of the yard. A tennis court occupied the land within the loop. Crowes, the terminus of the line, was the most southerly railway station on the Australian mainland.
The primary traffic was sawn timber and firewood, with many sawmills located adjacent to the railway, or accessed by short tramways. Seasonally heavy potato traffic and a lime kiln added to revenue. Traffic grew to require up to 7 trains a day each way by the mid 1920s. The introduction of the Garratt locomotive allowed a new timetable with two trains each way between Colac and Beech Forest, and a third train each way to Gellibrand. The Crowes branch saw a single mixed train daily. The arrival of the Great Depression and competition from motor vehicles saw traffic decline to a point where only one train each way operated over the line three days a week. Increased wartime loadings saw traffic increase to two trains each way daily, however this improvement was only temporary. By the time the railway closed, the timetable listed only one train each way a week, and most of the traffic was pulpwood.
The line opened using the Staff and Ticket method of safeworking. However Train Section Orders were adopted between 1927 and 1939, after which Staff and Ticket working was resumed.
List of stations
- Colac (Junction station with broad gauge.)
- Coram[disambiguation needed ]
- Birnam[disambiguation needed ]
- Lovat[disambiguation needed ]
- Gellibrand[disambiguation needed ]
- Beech Forest (Terminus until 1911)
- Buchanan[disambiguation needed ]
- Ferguson[disambiguation needed ]
- Weeaproinah (Terminus from 1955)
- Kincaid[disambiguation needed ]
- Stalker[disambiguation needed ]
- Lavers Hill
Moe to Walhalla
The last of the narrow gauge lines to open was the 26-mile (41.8 km) line to the gold mining town of Walhalla, in 1910. Walhalla had a history of gold mining dating back to the 1870s, and was one of the largest towns in Gippsland. Local residents had long lobbied for a railway, as all goods had to be brought in by bullock cart over rough terrain. However, the gold mine in Walhalla closed in 1914, and the town quickly fell into steep decline. It was reputed that the major source of traffic from Walhalla were the houses of residents leaving the town.
The line did pick up significant traffic from sawmills in the area, some of which had their own sidings. A connection was made with the Tyers Valley Tramway at Collins siding, between Watson and Erica. While the tramway used the same gauge as the railway, there was no physical connection, timber being transhipped by hand. A temporary connection had to be put in place to move locomotives to and from the tramway. A small copper mine and two lime kilns near Platina provided additional traffic. A series of "Back to Walhalla" days in the 1930s caused the railways to put on special passenger trains for these occasions, and such was the demand some were double-headed.
The line was truncated to Platina in 1944 then to Erica in 1952, before finally closing in 1954. The section of the line from Thomson to Walhalla has been rebuilt and now operates as the Walhalla Goldfields Railway.
List of stations
- Moe (Junction station with broad gauge.)
- Temporary Station Site
- Tyers River
- Erica (Terminus from 1952)
- Platina (Terminus from 1944)
- Thomson (Temporary terminus, closed with opening of Walhalla)
Welshpool to Port Welshpool horse-drawn tram
Unlike the other lines, the 3-mile (4.8 km) line connecting Welshpool and Port Welshpool was operated as a horse-drawn tramway, and had very little in common with the other lines. This line, also known as the Welshpool Jetty line, was opened in 1905 and closed in 1941.
- Houghton, Norman 1992 The Beechy Light Railway Research Society of Australia, Melbourne ISBN 0-909340-29-3
- Cuffley, Peter 1987 That Little Train The Five Mile Press, Fitzroy ISBN 0-86788-136-4
- various 1980 G42 Puffing Billy's Big Brother Puffing Billy Preservation Society ISBN 0-9598392-7-5
- Watson, Stephen 1980 Rails to Walhalla Part 1 Stephen Watson ISBN 095943710X
- Thompson, John 2002 Focus on Victoria's Narrow Gauge Whitfield Line Puffing Billy Preservation Society ISBN 0-9579792-2-3
- Victorian Government Narrow Gauge Railways
- Government Railways of less than 1,067 mm (3 ft 6 in) gauge
- Overview of the narrow-gauge rolling stock classification system
- Images of preserved rolling stock at Puffing Billy
Locomotives and rollingstock of the Victorian Railways and successors Steam'Old' A Class · 'New' A Class · AA Class · A2 Class · B Class · C Class · D Class · Dd Class · E Class · F Class · H Class · J Class · K Class · L Class · M Class · N Class · O Class · P Class · Q Class · 'Old' R Class · 'New' R Class · R Class · S Class · T Class · U Class · 'Old' V Class · V Class · W Class · X Class · Y Class · Z Class · Crane locomotives Diesel-Electric Diesel-HydraulicM class · V class · W class Electric Road Transferrable LocomotivesRTL Class CarriagesFixed wheel carriages · A/AA type carriages · AA/A type carriages · BG type carriages · E type carriages · H type carriages · K type carriages · N type carriages · PL type cars · S type carriages · V type carriages · W type carriages · Z type carriages · Royal Trains · Dining & Buffet cars · Sleeping cars · Joint and shared stock (SAR) · Joint and shared stock (NSWGR) Railmotors Suburban electric Freight vehiclesCar Transport · Box & Louvre vans · Flat Wagons · Hopper wagons · Livestock · Open wagons · Tank wagons Vans 2 ft 6 in (762 mm) Narrow Gauge OtherRail tractors · Cranes · Miscellaneous · Special loads · Way and Works stock Rail transport in Victoria · Railways in Melbourne · Narrow gauge lines of the Victorian Railways · Victorian Railways · V/Line · Metro Trains Melbourne Railway Lines in Victoria
Wikimedia Foundation. 2010.
Look at other dictionaries:
Narrow gauge railways in Australia — Main article: Rail transport in Australia Rail transport in Australia involves a number of narrow gauge railways. In some states they formed the core state wide network, but in the others they were either a few government branch lines, or… … Wikipedia
Victorian Railways livestock transport — Infobox Train background = name = Livestock transport imagesize = caption = interior interiorcaption = Manufacturer = Victorian Railways Factory = Newport Workshops Family = Built = From 1958 Refurbishment = Replaced = Formation = Designation =… … Wikipedia
Victorian Railways — The Victorian Railways operated railways in the Australian state of Victoria from 1859 to 1983. The first railways in Victoria were private companies, but when these companies failed or defaulted, the Victorian Railways was established to take… … Wikipedia
Victorian Railways X class — Infobox Locomotive name = Victorian Railways X Class powertype = steam caption = VR Newport Workshops photograph of X 28, 1929. The locomotive has not yet been fitted with lamps and cab windows. data for = Victorian Railways X class builder =… … Wikipedia
The Spooners of Porthmadog — refers to the Spooner family of Porthmadog, North Wales who made important contributions to the development of narrow gauge railways both locally and throughout the world. James Spooner, together with his sons James Swinton and Charles Easton and … Wikipedia
Railways in Melbourne — Melbourne rail network City Loop Caulfield group Frankston line Pakenham line Sandringham line Cranbourne line … Wikipedia
Victorian Goldfields Railway — Line details Completed 1884 Closed 1976 Reopened … Wikipedia
Lines Bros — Ltd was a British toy manufacturer of the 20th Century, operating under the Tri ang brand name.Lines Bros Ltd, at its peak, was claimed to be the largest toy maker in the world.HistoryThe brothers George and Joseph Lines made wooden toys in the… … Wikipedia
Gauge conversion — Change of gauge redirects here. For other uses, see Change of gauge (disambiguation). Track gauge by size … Wikipedia
Loading gauge — The clearance between train and tunnel is often small. London Underground train at Hendon. A loading gauge defines the maximum height and width for railway vehicles and their loads to ensure safe passage through bridges, tunnels and other… … Wikipedia