Lever frame

Lever frame

Mechanical railway signalling installations rely on lever frames for their operation to interlock the signals and points to allow the safe operation of trains in the area the signals control. Located in the signal box, the levers are operated by the signalman.


By the movement of individual levers, signals, points, level crossing gates or barriers and sometimes movable bridges over waterways are operated via wires and rods. The signaller chooses the correct combination of points, facing point locks and signals to operate, which will control the movement of each train through his or her area of control.

The lever frame contains interlocking designed to ensure that the levers cannot be operated to create a conflicting train movement. Each interlocking installation is individual and unique to the location controlled. The interlocking may be achieved mechanically or by electric lever locks, or (more usually) a combination of both.

Signals or points located some distance away from the signal box are sometimes electrically rather than mechanically operated. Movement of the controlling lever operates an electrical circuit controller. In the UK, it is practice to cut short the handles of any levers controlling electrical apparatus, to remind signalmen that little effort is required to move them.

Mechanical lever frames and interlocking have now largely been replaced by modern, much larger electrical or electronic route interlockings located in Power Signal Boxes and more recently Integrated Electronic Control Centres which are able to control much larger areas of the rail network.


Ground frames

A ground frame is a small lever frame located beside a railway, usually at ground level. A ground frame does not normally require any form of shelter since it is usually operated by traincrew and not permanently staffed. A ground frame is typically used to control the points giving access to an infrequently used siding or an emergency crossover, where the expense of providing control from a remote signal box cannot be justified. In some situations, signals may be worked from a ground frame.

In most cases, a ground frame has to be released from a signal box before it can be used. Typical methods of release include:
* Mechanical midway release.
* Release by key (e.g. Annett's key).
* Release by single line token.
* Electrical release.
* Track circuit release.

Once the ground frame has been released, the other levers controlling the points could be moved. When shunting was completed, the release cannot be restored until all levers are set back to their normal positions, allowing the main line to be used again. The train would then continue on its way.

If it was necessary for the train to be on the sidings controlled by the ground frame for a considerable time, it was desirable to release the running line so other trains could travel through the block section. To achieve this, a token instrument would be provided in a lineside hut near the ground frame. Once the train was off the main line, the points would be set back to normal, allowing the token to be removed from the ground frame. It would be then inserted into the token instrument in the hut, releasing the instruments at both ends of the section, so either signal box could then remove a token for another train to use the line, whilst the shunting train was in the sidings.

The modern equivalent of a ground frame, with switches instead of levers, is called a "Ground Switch Panel (GSP)". Points or signals worked from a ground switch panel are usually electrically operated.

Power frames

The lever frame principle of operation was perpetuated in the earliest power signalling installations. Since the signals and points worked electrically, no mechanical effort was needed to move the levers, which could therefore be miniaturised. In some cases, the interlocking was still done mechanically, but in others, electric lever locks were used.

Westinghouse Brake & Saxby Signal Co. Ltd. was one of the companies that produced miniature power lever frames. All-electric power lever frames were produced from 1929 onwards; earlier mechanical frames were produced before this date. In the UK, the Style 'L' all-electric miniature power lever frame was the most predominant on UK main line railways.

The Style 'B' & 'K' miniature power lever frames were the historical precursor frames in the development process of the Style 'L' frame.

London Underground railways used miniature power lever frames; initially Style 'B' was used. Later on, Style 'N' was introduced. This is a mechanically locked version of the Style 'L' frame. Style 'M', 'M2' and 'V' were also used.


In the UK, larger railway companies developed their own mechanical interlocking systems e.g. the Great Western Railway (GWR) and the London and North Western Railway (LNWR), whilst smaller independent railway companies sometimes installed commercially obtained signalling products from companies such as The Railway Signal Company (RSC) and The Westinghouse Brake and Signal Company (WB&SCo).

External links

* [http://www.signalbox.org/frames.shtml The Signal Box - Lever Frames]
* [http://www.wbsframe.mste.co.uk Westinghouse Miniature Power Lever Frame web site]

Photo gallery

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • lever net — a net on a frame operated from shore or from a raft in a dipping motion …   Dictionary of ichthyology

  • Bicycle frame — Steel frame of 2000 LeMond Zurich road racing bicycle mounted in a work stand …   Wikipedia

  • Beugniot lever — The Beugniot lever ( Beugniot Hebel ) is a mechanical device used on a number of locomotives to improve curve running. It was named after its inventor Edouard Beugniot.Around 1860, when Beugniot was the chief engineer at the firm of Köchlin, he… …   Wikipedia

  • perpetual lever — Wheel Wheel (hw[=e]l), n. [OE. wheel, hweol, AS. hwe[ o]l, hweogul, hweowol; akin to D. wiel, Icel. hv[=e]l, Gr. ky klos, Skr. cakra; cf. Icel. hj[=o]l, Dan. hiul, Sw. hjul. [root]218. Cf. {Cycle}, {Cyclopedia}.] [1913 Webster] 1. A circular… …   The Collaborative International Dictionary of English

  • Darcy Lever — For the maritime author, see Darcy Lever (author). Coordinates: 53°34′08″N 2°24′04″W / 53.569°N 2.401°W / 53.569; 2.401 …   Wikipedia

  • Jack frame — Jack Jack (j[a^]k), n. [F. Jacques James, L. Jacobus, Gr. ?, Heb. Ya aq[=o]b Jacob; prop., seizing by the heel; hence, a supplanter. Cf. {Jacobite}, {Jockey}.] [1913 Webster] 1. A familiar nickname of, or substitute for, John. [1913 Webster] You… …   The Collaborative International Dictionary of English

  • Freeze Frame (pricing game) — Freeze Frame is a pricing game on the American television game show The Price Is Right . Debuting on February 22, 1995, it is played for a four digit prize, worth between $3,000 and $10,000.GameplayThe game board features a ring of eight tiles,… …   Wikipedia

  • Railroad switch — For other uses, see Switch (disambiguation). A right hand railroad switch with point indicator pointing to right …   Wikipedia

  • Signal box — A signal box or signal cabin is a building from which railway signals and points are controlled. The term signal cabin is used in Ireland, parts of Scotland and in Australia while in North America, the term interlocking tower predominates.… …   Wikipedia

  • Connington South rail crash — Date and time 5 March 1967 : 2336 Location Conington [sic], Huntingdonshire Rail line East Coast Main Line Cause Signalling error (likely deliberate) Trains 1 …   Wikipedia