Height adjustable suspension


Height adjustable suspension

Height adjustable suspension is a feature of certain automobile suspension (vehicle) systems that allow the motorist to vary the ride height or ground clearance. Such a feature requires fairly sophisticated engineering.

Height adjustment is most often achieved by air or oil compression used for the "springs" of the vehicle - when the pressure is varied - the vehicle body rises or lowers.

Factory systems

The first instance of a production vehicle with adjustable suspension was on the 1954 Citroën 15CVH. This vehicled featured a self-leveling, height adjustable hydropneumatic suspension. Since this time, these systems have appeared continuously on Citroën models, including the DS and CX.

Height adjustable suspension was banned in the United States from 1974 to 1981, due to the stringent interpretation of passenger vehicle bumper height regulations by the U.S. government agency NHTSA.

Many Modern SUVs use height-adjustability as part of active suspension systems to improve the vehicle's versatility on and off road. The Range Rover offered this feature from 1993. New models of the Ford Expedition have a computer-controlled system designed for convenience, which lowers automatically when the doors are unlocked by remote, returns to normal height when the vehicle is started, and (on 4-wheel-drive models), raises when the 4x4 system is engaged.

Some sports cars use these systems to improve the vehicle's handling by lowering the vehicle's height during higher speeds - a current example being the Mercedes-Benz Active Body Control system.

Height adjustable air suspensions are also equipped "Low-floor" city buses mainly. This mechanism uses for barrier-free:lowering floor at bus stop, to allow handicap passengers to board easily. Iron ring can be used for increase rear height.

Aftermarket systems

Adjustable suspensions have become intrinsically associated with lowrider vehicles. The popular image of these vehicles is of one "hopping" on its suspension, or sitting with one wheel completely off the ground.

These systems were initially adapted from the hydraulic pistons, valves and pumps used to adjust the flaps on aircraft. Today however, many aftermarket companies produce parts and equipment specifically designed for lowriders

In recent years "air bag" systems (not to be confused with the air bag safety device) have been rapidly gaining popularity among car customizers. These air suspension systems use heavy duty custom rubber "bags" to replace the stock shocks and springs, with either a compressor or tank of compressed gas used to raise and lower the vehicle at will.

History of aftermarket systems

Ron Aguirre is commonly accepted as the first person to create a custom car with hydraulically adjustable suspension. In 1959 he scavenged the Pesco pumps and valves from a B-52 Bomber and adapted them to the front suspension of his X-Sonic bubble-topped custom Corvette, allowing him to change the height of the car with a switch on the dashboard.

User control

Traditional height adjustable suspension is controlled by the driver manually.Certain modern layouts allow electronics alone to make this decision without the driver's control, especially if the car lowers at high speed.


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Suspension (vehicle) — Suspension is the term given to the system of springs, shock absorbers and linkages that connects a vehicle to its wheels. Suspension systems serve a dual purpose – contributing to the car s handling and braking for good active safety and driving …   Wikipedia

  • Air suspension — is a type of vehicle suspension powered by an engine driven or electric air pump or compressor. This pump pressurizes the air, using compressed air as a spring. Air suspension replaces conventional steel springs. If the engine is left off for an… …   Wikipedia

  • Torsion beam suspension — A torsion bar suspension, also known as a torsion spring suspension or incorrectly torsion beam, is a general term for any vehicle suspension that uses a torsion bar as its main weight bearing spring. One end of a long metal bar is attached… …   Wikipedia

  • Active suspension — Active or adaptive suspension is an automotive technology that controls the vertical movement of the wheels with an onboard system rather than the movement being determined entirely by the road surface. The system virtually eliminates body roll… …   Wikipedia

  • Ride height — (ground clearance or simply clearance) is the amount of space between the base of an automobile tire and the underside of the chassis; or, more properly, to the shortest distance between a flat, level surface, and any part of a vehicle other than …   Wikipedia

  • Hydropneumatic suspension — Hydropneumatic is a type of automotive suspension system, invented by Citroën, and fitted to Citroën cars, as well as being adapted by other car manufacturers, notably Rolls Royce, Mercedes Benz and Peugeot. It was also used on Berliet trucks.… …   Wikipedia

  • Bicycle suspension — refers to the system or systems used to suspend the rider and all or part of the bicycle in order to protect them from the roughness of the terrain over which they travel. Bicycle suspension are used primarily on mountain bicycles, but are also… …   Wikipedia

  • Citroën CX — Manufacturer Citroën Production 1974 1991 Assembly …   Wikipedia

  • Active Body Control — Active Body Control, or ABC, is the Mercedes Benz brand name used to describe fully active suspension, that allows control of the vehicle body motions and therefore virtually eliminates body roll in many driving situations including cornering,… …   Wikipedia

  • Ducati V-twin motorcycles — Ducati Multistrada 90 Degree V twin motor The next new Ducati engine to appear after the Ducati Apollo was the 90°V twin, initial Grand Prix racing versions being 500 cc, and the production bikes were 750 cc. There was also the Ducati 750 Imola… …   Wikipedia