Development of Japanese tanks in World War II


Development of Japanese tanks in World War II

The Imperial Japanese Army (IJA) initially purchased foreign tanks for evaluation during World War I, and began developing its own indigenous designs during the late 1920s.

Initial tank procurement

Near the end of World War I, the IJA showed an interest in armored warfare and tanks and obtained a variety of models from foreign sources. These models included one British Heavy Mk IV and six Medium Mark A Whippets, along with thirteen French Renault FT-17s (later designated "Ko-Gata Sensha" or "Type A Tank"). The Mk IV was purchased in October 1918 while the Whippets and Renaults were acquired in 1919. [Zaloga, p.4]

Trials with these vehicles were successful, and the IJA decided to establish an armored force in 1925, planning to form three light tank battalions and one heavy tank battalion. However, the greatest problem was equipping these units, as the Japanese did not have any indigenous tank production capability. The IJA therefore sent a mission to purchase more tanks from the United Kingdom and France, requesting newer designs. However, the newer tanks were not available as these countries had difficulties supplying them to their own armored forces, and the only available model was the older Renault FT-17. The IJA reluctantly imported these, but in 1929 they were able to acquire ten examples of its successor, the Renault NC1 (designated "Otsu-Gata Sensha" or "Type B Tank"). Both types of tanks were still in active Japanese service in 1940, and additional vehicles and spare parts were obtained after the Japanese occupation of French Indochina.

The IJA also purchased several Vickers 6-Ton tanks and Carden Loyd tankettes and used these as a basis for further development, resulting in tanks such as the Type 89 Chi-Ro.

Doctrine

Having adopted the French-designed tanks, Japan was also influenced by French doctrine in armor design and employment, just as the Americans and Italians had been before them. As with many other nations, the Japanese viewed the tank as a tool largely used to directly support infantry units, and were rarely allowed independent action. During the Second Sino-Japanese War, Japanese tanks were successful, especially as the Chinese had no significant tank forces.

With their defeat by the Soviet Union at Nomonhan in 1939, the Japanese began to rethink their tank designs and doctrine, although the emphasis remained on infantry support. However, with the beginning of the Pacific War, Japan's priorities shifted to warship and aircraft production, and resources for the production of armored vehicles for the IJA were diverted or curtailed. [Zaloga, p.3]

In addition, the terrain of Southeast Asia and the islands of the Pacific were in general not suited to armored warfare, being largely tropical rainforest. Aside from the invasion of Malaya, large-scale Japanese use of tanks was limited and therefore development of newer designs was not given high priority. Older tanks continued to be used as defensive emplacements and infantry support weapons. Advanced Japanese tank designs which could challenge Allied tanks did not appear until close of World War II, however these were experimental or produced in small quantities, not enough to affect the course of the war.

Japanese designs

For both security and logistical reasons, many engineers in the Japanese Army Technical Bureau during the early 1920s were adamant that future tanks should be made in Japan. General Suzuki (chief of the Technical Bureau) protested the Ministry of War decision to purchase foreign designs, which ultimately led to that decision being reversed.

However, indigenous design and production of armored vehicles would prove to be difficult, due to minimal experience with military motor vehicle design (the engineers had only designed several types of trucks and one type of tractor), along with low priority for tank steel production. Moreover, the first design had to be completed in only two years or the program would be canceled.

Type 87 Chi-I medium tank

Development of the first Japanese-designed tank began in June 1925. A team of four engineers in the motorcar group of the Technical Bureau participated in the development, including a young army officer, Major Tomio Hara. Major Hara later became the head of the tank development department and would rise to the rank of General. The team started their design of a tank and worked hard to complete the project within the two years allocated. As this was the first tank designed in Japan, they had to begin with almost every component built from scratch.

Hara designed a bell crank scissors suspension which paired the bogie wheels and connected them to a coil spring mounted horizontally outside the hull. This suspension became standard on the majority of Japanese tanks and can be seen on the Type 89 medium tank.

The design was completed in May 1926 and production was ordered to begin at the Osaka Army Arsenal. At the time, there was little heavy industry allocated to the production of motor vehicles in Japan, so there were significant difficulties creating the prototype. The prototype was completed in February 1927, within the required period. Many IJA generals attended the trials on June 21-22, 1927, and the tank showed acceptable performance during movement in rough terrain and on slopes.

Along with the Osaka Army Arsenal, Sagami Army Arsenal was also assigned to oversee the design and manufacture of assorted types of armored vehicles and tanks.

Type 89 Chi-Ro medium tank

The IJA decided that the Type 87 was too heavy at 18 tons and too slow to be used as its main tank, and the Type 89 Chi-Ro was developed to overcome these shortcomings. The new design weighed 12.8 tons and used stronger and lighter steel plate instead of the Type 87's iron armor. Armament was a Type 90 57 mm gun, along with one (later two) Type 91 6.5 mm machine guns. The Type 89 design was completed in April 1929, with production starting in 1931, making this the first tank to be mass-produced in Japan. The Type 89 had two variants - the Kō ("A") version, which used a water-cooled gasoline engine, and the Otsu ("B") version, with an air-cooled diesel engine and improved frontal armor. The Type 89 first saw combat in China, but was in the process of being replaced by the Type 97 Chi-Ha at the start of World War II.

Type 95 Ha-Go light tank

The Type 95 Ha-Go was a replacement for the Type 89 medium tank which was considered too slow for mechanized warfare. The prototypes were built by Mitsubishi and production was started in 1935, with over 2000 completed by the end of the war. It was armed with a 37 mm main gun and two 7.7 mm (0.303 inch) machine guns, one in the turret rear and the other hull-mounted. The Type 95 weighed 7.4 tons and had three crewmen. It served throughout the Pacific Theater, including China and on many Pacific islands, such as Guadalcanal, the Marianas, and Iwo Jima. Several variants were built, among them the Type 3 Ke-Ri, which mounted a 57 mm Model 97 gun, the Ta-Se, an anti-aircraft tank which mounted a 20mm AA gun, and the Type 5 Ho-Ru, a self-propelled gun similar to the German Hetzer, but with a 47 mm gun.

Type 97 Chi-Ha medium tank

Some 3,000 examples of the Type 97 Chi-Ha were produced by Mitsubishi, including several types of specialized tanks. Initial versions were armed with a low-velocity 57 mm gun, but from 1942 onwards, the Model 97 was armed with a high-velocity 47 mm cannon, mounted in a larger turret taken from the Type 1 Chi-He medium tank (see below). This version was designated Shinhoto Chi-Ha ("new turret") and is considered by many to be one of the best Japanese tank designs of the war.

Type 1 Chi-He medium tank

The Type 1 Chi-He was developed in 1942 to replace the Type 97. The newer tank proved to be superior to the Type 97 in both speed and armor protection, but due to the rapid pace of events, the Japanese Army had shown little interest in this new tank. The turret and 47 mm gun of the Type 1 could be mounted on the hull of the Type 97 (creating the Shinhoto Chi-Ha version) and the factories were already mass-producing the older tank. Production of the Chi-He started in 1944, but was discontinued after less than one year in favor of the Type 3 Chi-Nu medium tank.

Type 3 Chi-Nu medium tank

The Type 3 Chi-Nu medium tank was urgently developed to counter the American M4 Sherman medium tank. Originally, the next tank in development to replace the Chi-He was the Type 4 Chi-To medium tank. However, the development of the Chi-To and the Type 5 Chi-Ri heavy tank was delayed, again due to a steel shortage, and a stopgap tank was required. The development of Chi-Nu started in May 1944 and was completed in October of that year. The Chi-Nu was the last tank deployed by the IJA, and production continued until the end of the war.

O-I superheavy tank

The O-I experimental superheavy tank had three turrets and weighed 120 tons, and required a crew of 11 men. It was 10 meters long by 4.2 meters wide with an overall height of 4 meters. The armor was 200 mm at its maximum, and the tank had a top speed of 25 km/h. This version had two gasoline engines, and was armed with 1 x 105 mm cannon, 1 x Type 1 37 mm (in a forward-mounted sub-turret), and 3 x Type 97 7.7 mm machine guns (one mounted in a forward sub-turret) while an ultraheavy version also mounted a Type 1 37 mm in a rear-facing sub-turret. It has been reported the one copy of the O-I was manufactured before the end of the war and was shipped to Manchuria, according to an engineer concerned with the project. [ [http://mailer.fsu.edu/~akirk/tanks/japan/japan-exp.html Tanks! Armored Warfare Prior to 1946] ] No images of the O-I have been found, only some drawings are known to exist.

Amphibious tanks

Japan produced several amphibious tank designs, including the Type 1 Mi-Sha, Type 2 Ka-Mi, Type 3 Ka-Chi, Type 4 Ka-Tsu, Type 4 Ka-Sha, Type 5 To-Ku, F B Swamp Vehicle, Type 4 Ka-Tsu, Toku 4 Shiki Naikatei APC, and the SRII Ro-Go for use by the Japanese Special Naval Landing Forces. The Type 1 was an early experimental design, that led to the Type 2 Ka-Mi, which was the first production Japanese amphibious tank, although only 184 were built. The Type 3 Ka-Chi was first encountered by Allied forces at the Battle of Kwajalein in 1944, however, only 19 were built during the war. The tanks were used later in the war as dug-in pillboxes on Pacific islands.

Overall production

In the period between 1931 and 1938 the Japanese built nearly 1,700 new tanks, making them the 4th largest tank producer in the world at that time.Fact|date=February 2007 The peak of Japanese tank production was in 1942, but declined afterwards owing to war material priorities. By 1937, Japan fielded 1,060 tanks in 8 regiments. Japan developed many experimental and operative armored vehicles and tank types throughout the war.

German-influenced variants

Throughout the war Germany supplied blueprints, technological support, and some examples of their tanks to Japan in accordance with the Tripartite Pact signed by the Axis powers. Some of knowledge shared with Japan inspired or influenced later Japanese armored vehicles, for example:

*Type 3 Chi-Nu medium tank, roughly equivalent to Panzer III and Panzer IV tanks.
*Type 4 Chi-To medium tank with Type 4 75 mm AA Gun, inspired by the Panther tank.
*Type 5 Chi-Ri heavy tank with Type 99 88 mm AA Gun, inspired by the Tiger I.
*Type 1 Ho-Ha halftrack, inspired by the SdKfz 251
*Type 98 Ke-Ni light tank (Experimental Model Ke-Ni B), resembles PzKpfw II Ausf. L "Lynx" in its use of a Christie suspension and a coaxial machinegun.
*O-I superheavy tank and experimental ultraheavy tank, equivalent to the Panzer VIII Maus

References

Books

*cite book|last=Steven J. Zaloga|first=Peter Bull|title=Japanese Tanks 1939-45|publisher=Osprey Publishing|year=2007|id=ISBN 1846030919

Notes

External Links

* [http://www3.plala.or.jp/takihome/yi-go.htm Imperial Japanese Army Page - Akira Takizawa]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Japanese tanks of World War II — v · …   Wikipedia

  • Japanese-German pre-World War II industrial co-operation — In the years leading up to the outbreak of World War II in Europe in 1939, there were some significant collaborative development in heavy industry between German companies and their Japanese counterparts. This was one major factor in Japan s… …   Wikipedia

  • World War II — the war between the Axis and the Allies, beginning on September 1, 1939, with the German invasion of Poland and ending with the surrender of Germany on May 8, 1945, and of Japan on August 14, 1945. Abbr.: WWII * * * or Second World War (1939–45)… …   Universalium

  • World War II — WWII redirects here. For other uses, see WWII (disambiguation) …   Wikipedia

  • World War I — the war fought mainly in Europe and the Middle East, between the Central Powers and the Allies, beginning on July 28, 1914, and ending on November 11, 1918, with the collapse of the Central Powers. Abbr.: WWI Also called Great War, War of the… …   Universalium

  • World War II/temp — Aftermath= Impact of the war Casualties and atrocitiesBetween 50 and 70 million people were killed as a result of the war, with about two thirds of them being civilians. Many of these deaths were a result of genocidal actions such as The… …   Wikipedia

  • World War I — This article is about the major war of 1914–1918. For other uses, see World War One (disambiguation) and Great War (disambiguation). World War I …   Wikipedia

  • Japanese–German industrial co-operation before World War II — In the years leading up to the outbreak of World War II in Europe in 1939, there was some significant collaborative development in heavy industry between German companies and their Japanese counterparts as part of the two nation s evolving… …   Wikipedia

  • Japanese marine paratroopers of World War II — The Imperial Japanese Navy fielded marine paratroopers during World War II. The troops were officially part of the Special Naval Landing Forces (SNLF or Rikusentai ), the navy s marine corps. They came from the 1st, 2nd and 3rd Yokosuka SNLFs.… …   Wikipedia

  • Red Army's tactics in World War II — Development of Red Army tactics begun during the Russian Civil War, and are still a subject of study in the post Cold War defence studies of the Russian Federation. They were an important source of development in military theory, and in… …   Wikipedia