Acid-base titration

Acid-base titration

frame|100px|frame|Titration_setup._The_burette_would_normally_be_held_by_a_clamp,_not_shown_here._The_pink_is_most_likely_caused_by_use_of_the_phenolphthalein indicator.]

An acid-base titration is a method in chemistry that allows quantitative analysis of the concentration of an unknown acid or base solution. It makes use of the neutralization reaction that occurs between acids and bases, and that we know how acids and bases will react if we know their formula.


The key equipment used in a titration are:
*White Tile - used to see a colour change in the solution
*Acid/Base Indicator (the one used varies depending on the reactants)
*Erlenmeyer flask
*Standard Solution (a solution of known concentration, a common one is aqueous Na2CO3)
*Solution of unknown concentration
*It is also recommended that a control is used in order to see the difference in colour between the initial and final colour.


Before starting the titration a suitable pH indicator must be chosen. The endpoint of the reaction, the point at which all the reactants have reacted, will have a pH dependent on the relative strengths of the acid and base used. The pH of the endpoint can be estimated using the following rules:
*A strong acid will react with a strong base to form a neutral (pH=7) solution.
*A strong acid will react with a weak base to form an acidic (pH<7) solution.
*A weak acid will react with a strong base to form a basic (pH>7) solution.When a weak acid reacts with a weak base, the endpoint solution will be basic if the base is stronger and acidic if the acid is stronger. If both are of equal strength, then the endpoint pH will be neutral. However weak acids are not often titrated against weak bases because the colour change shown with the indicator is often quick therefore you will not be able to see the change of colour.

A suitable indicator should be chosen, that will experience a change in color close to the end point of the reaction.

First, the burette should be rinsed with the standard solution, the pipette with the unknown solution, and the conical flask with distilled water.

Secondly, a known volume of the unknown concentration solution should be taken with the pipette and placed into the conical flask, along with a small amount of the indicator chosen. The burette should always be filled to the top of its scale with the known solution for ease of reading.

The known solution should then be allowed out of the burette, into the conical flask. At this stage we want a rough estimate of the amount of this solution it took to neutralize the unknown solution. Let the solution out of the burette until the indicator changes color and then record the value on the buret. This is the first titre and should be discluded from any calculations.

Perform three more titrations, this time more accurately, taking into account we know roughly where the end point will occur. Take note of each of the readings on the buret at the end point, and average these at the end. Endpoint is reached when the indicator just changes color permanently. This is best achieved by washing a hanging drop from the tip of the buret into the flask right at the end of the titration to achieve a drop that is smaller in volume than what can usually be achieved by just dripping titre off the buret.

Acid-base titration is usually performed with a phenolphthalein indicator.

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Acid–base reaction — An acid base reaction is a chemical reaction that occurs between an acid and a base. Several concepts exist which provide alternative definitions for the reaction mechanisms involved and their application in solving related problems. Despite… …   Wikipedia

  • Acid–base homeostasis — Blood gas, acid base, gas exchange terms PaO2 Arterial oxygen tension, or partial pressure PAO2 Alveolar oxygen tension, or partial pressure PACO2 Arterial carbon dioxide tension, or partial pressure PaCO2 Alveolar carbon dioxide tension, or… …   Wikipedia

  • acid–base reaction — ▪ chemistry Introduction       a type of chemical process typified by the exchange of one or more hydrogen ions, H+, between species that may be neutral (molecules, such as water, H2O; or acetic acid, CH3CO2H) or electrically charged (ions, such… …   Universalium

  • titration — [tī trā′shən] n. 〚/span> TITRATE + ION〛 Chem. Physiol. the process of finding out how much of a certain substance is contained in a known volume of a solution by measuring volumetrically how much of a standard solution is required to produce a… …   Universalium

  • Titration (disambiguation) — Titration is a common laboratory method of quantitative chemical analysis that is used to determine the unknown concentration of a known reactant.Titration may also refer to:* Acid base titration, based on the neutralization reaction * Redox… …   Wikipedia

  • Titration — [ frame|Titration setup: the titrant drops from the burette into the analyte solution in the flask. An indicator present then changes color permanently at the endpoint.] Titration is a common laboratory method of quantitative chemical analysis… …   Wikipedia

  • Acid — This article is about acids in chemistry. For the drug, see Lysergic acid diethylamide. For other uses, see Acid (disambiguation). Acidity redirects here. For the novelette, see Acidity (Novelette). Acids and Bases …   Wikipedia

  • Base (chemistry) — For the term in genetics, see base (genetics) Acids and Bases Acid dissociation constant Acid base extraction Acid–base reaction Acid–base titration …   Wikipedia

  • Acid dissociation constant — Acetic acid, a weak acid, donates a proton (hydrogen ion, high …   Wikipedia

  • Titration curve — Titrations are often recorded on titration curves, whose compositions are generally identical: the independent variable is the volume of the titrant, while the dependent variable is the pH of the solution (which changes depending on the… …   Wikipedia