- Norden bombsight
The Norden bombsight was a tachometric bombsight used by the United States Army Air Forces (USAAF) and the United States Navy during World War II, and the United States Air Force in the Korean and the Vietnam Wars to aid the crew of bomber aircraft in dropping bombs accurately. Key to the operation of the Norden were two features; a mechanical computer that calculated the bomb's trajectory based on current flight conditions, and a linkage to the bomber's autopilot that let it react quickly and accurately to changes in the wind or other effects. Together, they allowed for unprecedented accuracy in day bombing from high altitudes; in testing the Norden demonstrated a circular error probable (CEP) of 75 feet, an astonishing performance for the era.
The Norden was initially developed by the Navy in order to provide a system capable of bombing ships from outside the range of their defensive guns, and the Army took up the design for similar missions. Hitting small targets of this sort demanded high accuracy, and the Norden company joked that they could hit a pickle barrel from 30,000 feet. In operations, the Norden proved to be far less accurate than in testing, and early attacks by the US Navy and USAAF in the Pacific failed to hit their targets. The USAAF continued using the Norden for point attacks during the initial operations over Germany in 1943, but post-raid reconnaissance demonstrated the bombers were putting only 24% of their bombs to within 1,000 yards of their targets. This was not due specifically to problems in the Norden, but due largely to its accuracy requiring proper setup and conditions that rarely held in practice. Given this poor performance, the USAAF moved to area bombing in 1944.
The supposed great secrecy of the device was also widely promoted, to some degree to invent a mythology to boost its reputation. In fact, the Norden received reduced classification long before the war, was declassified in 1942, widely written about in the press in 1943, and shown publicly in 1944. The basic concepts were well known even earlier, and other air forces had been working on similar designs around the same time, notably the RAF's Automatic Bomb Sight. It was also known that Herman Lang, a German spy working at the factory, leaked the design to the Abwehr in 1938. The Carl Zeiss Lotfernrohr 7, widely deployed by the Luftwaffe, was an advanced mechanical system technically similar to the original Norden bombsight.
The Norden's reputation was further enhanced after the war, when it was repeatedly pressed into service over the following decades. Bombing had moved to nuclear weapons, where a 3,000 foot CEP was considered good enough, and the development of precision bombsights had largely been ignored. Invariably, when tactical bombing was required in the non-nuclear conflicts that followed, the Norden was returned to service time and time again. The last combat use of the Norden was in US Navy's VO-67 squadron, which used them to drop sensors onto the Ho Chi Minh Trail as late as 1967. The Norden remains one of the best known bombsights of all time.
- 1 History
- 2 Description and operation
- 3 See also
- 4 References
- 5 Further reading
- 6 External links
The Norden sight was designed by Carl Norden, a Dutch engineer educated in Switzerland who emigrated to the U.S. in 1904. In 1911, Norden joined Sperry Gyroscope to work on ship gyrostabilizers,[notes 1] and then moved to work directly for the US Navy as a consultant. At the Navy, Norden worked on a catapult system for a proposed flying bomb that was never fully developed, but this work introduced various Navy personnel to Norden's expertise with gyro stabilization.
During World War I it was already realized that one major source of error in bombing was levelling the aircraft enough so the bombsight pointed the direction it should. Even small errors in levelling could produce dramatic errors, so the Navy had Norden design a gyro platform for their existing Mark III bombsight (a copy of the RAF's Course Setting Bomb Sight) to eliminate this source of error. At the time, one of the primary sources of error, outside levelling, was the accurate measurement of the wind and its effects on the flight path. Many systems, including the Course Setting Bomb Sight, invested considerable effort in calculating the wind's effect on timing the drop. The Course Setting and similar sights helped direct the aircraft toward the proper point in space to drop the bombs, although flying to that spot was by no means a simple process.
First bombsight design
Norden came up with the idea of improving bombing accuracy through the use of an automated pilot direction indicator (PDI). PDIs were relatively new devices, but already widely used by the 1920s. They normally consisted of a set of two pointer indicators, one for the pilot and one for the bombardier, and button that allow the bombardier to move the pointers left or right. During the bomb run, the bombardier would used the buttons to move the pointer to direct the pilot to turn in the right direction to bring the bomber over the drop point. Norden's concept was much more advanced; he proposed attaching a low-power sighting telescope to a gyro platform that would keep the telescope pointed at the same azimuth in spite of the aircraft's movements. The bombardier would simply rotate the telescope left or right to follow the target, this motion would cause the gyros to precess, and this signal would drive the PDI automatically.
To time the drop, Norden used an idea already in use on other bombsights, the "equal distance" concept. This was based on the observation that the time needed to travel a certain distance over the ground would remain relatively constant during the bomb run, as the wind would not be expected to change dramatically over a short period of time. If you could accurately mark out a distance on the ground, or in practice an angle in the sky, timing the passage over that distance would give you all the information needed to time the drop. In Norden's version of the system, the bombardier first looked up the expected time it would take for the bombs to fall from the current altitude. This time was set into a countdown stopwatch, and the bombardier waited for the target to line up with a set of iron sights at the front of the bombsight. When the target passed through the sights, the timer was started, which started another sight rotating forward at twice the angular speed of the aircraft. When the timer ran to zero, the sight stopped, and was in the correct position for aiming. The bombardier then switched to this second set of sights for the drop.
The first of these Mark XI bombsights was delivered to the Navy's proving grounds in Virginia in 1924. In testing, the system proved disappointing. The circular error probable (CEP), a circle into which 50% of the bombs would fall, was 110 ft wide from only 3,000 ft altitude, an error of over 3.6% and somewhat worse than existing systems. Moreover, bombardiers universally complained that the device was far too hard to use. Norden worked tirelessly on the design, and by 1928 the accuracy had improved to 2% of altitude, enough that the Navy's Bureau of Ordnance placed a $348,000 contract for the devices. The US Army heard of the system in 1929 and was eventually able to buy an example in 1931. Their testing mirrored the Navy's experience, the gyro stabilization worked and the sight was accurate, but it was also "entirely too complicated" to use.
During development, the Navy suggested that Norden consider taking on a partner to handle the business and leave Norden free to develop on the engineering side. They recommended former Army colonel Theodore Barth, an engineer who had been in charge of gas mask production during World War I. The match proved to be an excellent one, as Barth had the qualities Norden lacked; charm, diplomacy, and a head for business. The two became close friends.
Fully automatic bombsight
While the Mk. XI was reaching its final design, Norden was already considering an improved version. However, by this point the US Army Air Corps was working with Sperry Gyroscope on an entirely new style of bombsight using the "synchronous" method to measure the ground speed. Norden was initially unconvinced this was workable, but eventually convinced by the Navy to try to build a synchronous design of his own, and a development contract was offered in June 1929. Norden retreated to his mother's house in Zurich and returned in 1930 with a working prototype. Lieutenant Frederick Entwistle, the Navy's chief of bombsight development, judged it revolutionary.
The new design, the Mark XV, was delivered in production quality in the summer of 1931. In testing it proved to eliminate all of the problems of the earlier Mk. XI design. From 4,000 ft altitude the CEP was down to only 35 ft, while even the latest Mk. XI's were 55 ft. At higher altitudes, a series of 80 bomb runs demonstrated a CEP of 75 feet. In a test on 7 October 1931, the Mk. XV dropped 50% of its bombs on a state target, the USS Pennsylvania, while a similar aircraft with the Mk. XI had only 20% of its bombs hit.
Moreover, the new system was dramatically simpler to use. After locating the target in the sighting system, the bombardier simply made fine adjustments throughout the bomb run on two wheels. There was no need for external calculation, lookup tables or pre-run measurements - everything was carried out automatically through the internal mechanical calculators. The calculator took a short time to settle on a solution, with setups as short as 6 seconds, down from 50 for the Mk. XI. In general, the bomb run needed to be only 30 seconds long.
In spite of the success, the design also demonstrated several serious problems. In particular, the gyroscopic platform had to be levelled out before use using several spirit levels, and then checked and repeatedly re-set for accuracy. This procedure could take as long as 8 and ½ minutes. Worse, the gyros had a limited degree of movement, and if the plane banked far enough the gyro would reach its limit and have to be re-set from scratch - something that could happen even in strong turbulence. More minor problems were the electric motors which drove the gyroscopes, whose brushes wore down quickly and left carbon dust throughout the interior of the device, and the positioning of the control knobs, which meant the bombardier could only adjust side-to-side or up-and-down aim at a time, not both. But in spite of all of these problems, the Mark XV was so superior to any other design that the Navy ordered it into production.
Carl L. Norden Company incorporated in 1931, supplying the sights under a dedicated source contract. In effect, the company was owned by the Navy. In 1934 the newly-forming GHQ Air Force, the purchasing arm of the US Army Air Corps, selected the Norden for their bombers as well, as the M-1. However, due to the dedicated source contract, the Army had to buy the sights through the Navy. This was not only annoying for inter-service rivalry reasons, but the Air Corps' higher-speed bombers demanded several changes to the design, notably the ability to aim the sighting telescope further forward to give the bombardier more time to set up. The Navy was not interested in these changes, and would not promise to work them in. Worse, Norden's factories were having serious problems keeping up with demand for the Navy alone, and in January 1936, the Navy suspended all shipments to the Army.
Autopilot, production problems
Mk. XV's were initially installed with the same automatic PDI as the earlier Mk. XI. In practice, it was found that the pilots had a very difficult time keeping the aircraft stable enough to match the accuracy of the bombsight. Starting in 1932 and proceeding in fits and starts for the next six years, Norden developed the Stabilized Bombing Approach Equipment (SBAE), a mechanical autopilot that attached to the bombsight. By rotating the bombsight in relationship to the SBAE, the SBAE could calculate the directional changes needed to bring the aircraft onto the bomb run. It was able to correct for wind and turbulence much more quickly than the pilot, and thereby ensure much greater accuracy on the drop. The minor adaptations needed on the bombsight itself produced what the Army referred to as the M-4 model.
In 1937 the Army, faced with the continuing supply problems with the Norden, once again turned to Sperry Gyroscope to see if they could come up with a solution. Their earlier models had all proved unreliable, but they had continued working with the designs throughout this period and had addressed many of the problems. By 1937, Orland Esval had introduced a new AC-powered electrical gyroscope that spun at 30,000 RPM, compared to the Norden's 7,200, which dramatically improved the performance of the inertial platform. The use of three-phase AC power and inductive pickup eliminated the brushes, and further simplified the design. Carl Frische had developed a new system to automatically level the platform, eliminating the time-consuming process needed on the Norden. The two collaborated on a new design, adding a second gyro to handle heading changes, and named the result the Sperry S-1. Existing supplies of Nordens continued to be supplied to the USAAC's B-17s, while the S-1 equipped the B-24Es being sent to the 15th Air Force.
Some B-17s had been equipped with a simple heading-only autopilot, the Sperry A-3, since the late 1920s. The company had also been working on an all-electronic model, the A-5, which stabilized in all three directions, and by the early 1930s it was being used in a variety of Navy aircraft to excellent reviews. By connecting the outputs of the S-1 bombsight to the A-5 autopilot, Sperry produced a system similar to the M-4/SBAE, but one that was much more fast acting. The combination of the S-1 and A-5 so impressed the Army that on 17 June 1941 they authorized the construction of a 186,000 square foot factory and noted that "in the future all production models of bombardment airplanes be equipped with the A-5 Automatic Pilot and have provisions permitting the installation of either the M-Series [Norden] Bombsight or the S-l Bombsight".
When they heard of the new contract, Norden's Barth called a meeting with the Army and Navy at their factory in New York City. Barth offered to build an entirely new factory just to supply the AAC, but the Navy refused this. Instead, the Army suggested that Norden adapt their sight to work with Sperry's A-5, which Barth refused. Norden actively attempted to make the bombsight incompatible with the A-5, and it was not until 1942 that the impasse was finally solved by farming out autopilot production to Honeywell Regulator, who combined features of the SBAE with the A-5 to produce the C-1. These were mated to sight heads supplied by Norden, and the production problems were solved.
British interest, Tizard mission
By mid-1938 information about the Norden had worked its way up the Royal Air Force chain of command and was well known within that organization. The British were in the midst of developing their own Stabilized Automatic Bomb Sight (SABS), but it would not be available until 1940 at the earliest, and likely later. Even then, it did not feature the autopilot linkage of the Norden, and would thus find it difficult to match the Norden's performance in anything but smooth air. Acquiring the Norden became a major goal.
Their first attempt, in the spring of 1938, was rebuffed by the Navy. Sir Edgar Ludlow-Hewitt, Chief Marshal of Bomber Command, demanded Air Ministry action, and they wrote to George Pirie, the British air attaché in Washington, suggesting he approach the Army with an offer of an information exchange with their own SABS. Pirie replied that he had already looked into this, and was told that the Army had no licensing rights to the device. The matter was not helped by a minor diplomatic issue that flared up in July when a French air observer was found to be onboard a crashed Douglas Aircraft Company bomber, forcing President Roosevelt to promise no information exchanges with foreign powers. Six months later, after a change of leadership within the Navy's Bureau of Aeronautics, on 8 March 1939 Pirie was once again instructed to ask the Navy about the Norden, this time sweetening the deal with offers of British power-operated turrets. However, Pirie expressed concern as he noted the Norden had become as much political as technical, and its relative merits were being publicly debated in Congress weekly while the Navy continued to say the Norden was "the United States' most closely guarded secret".
The RAF's desires were only further goaded on 13 April 1939, when Pirie was invited to watch an air demonstration at Fort Benning where the painted outline of a battleship was the target. "At 1:27 while everyone was still searching [the sky for the B-17s] six 300-pound bombs suddenly burst at split second intervals on the deck of the battleship, and it was at least 30 seconds later before someone spotted the B-17 at 12,000 feet." The three following B-17s also hit the target, and then a flight of a dozen Douglas B-18 Bolos placed most of their bombs in a separate 600 by 600 yard square outlined on the ground.
A change of management within the Bureau of Aeronautics had the effect of making the Navy more friendly to British overtures, but no one was willing to fight the political battle needed to release the design. The Navy brass was concerned that giving the Norden to the RAF would increase its chances of falling into German hands, which could put the US's own fleet at risk. The Air Ministry continued increasing pressure on Pirie, who eventually stated there was simply no way for him to succeed, and suggested the only way forward would be through the highest diplomatic channels in the Foreign Ministry. Initial probes in this direction were also rebuffed. When a report stated that the Norden's results were three to four times as good as their own bombsights, the Air Ministry decided to sweeten the pot again, and suggested they offer information on radar in exchange. This too was rebuffed.
The matter eventually worked its way to Prime Minister Neville Chamberlain, who wrote personally to President Roosevelt asking for the Norden, but even this was rejected. The reason for these rejections more political than technical, but the Navy's demands for secrecy were certainly important. They repeated that the design would be released only if the British could demonstrate the basic concept was common knowledge, and therefore not a concern if it fell into German hands. The British failed to convince them, even after offering to equip their examples with a variety of self-destruct devices.
This may have been ameliorated by the winter of 1939, at which point a number of articles about the Norden appeared in the US popular press with reasonably accurate descriptions of its basic workings. But when these were traced back to the press corps at the Army Air Corps, the Navy was apoplectic. Instead of accepting it was now in the public domain, any discussion about the Norden was immediately shut down. This drove both the Air Ministry and Royal Navy to increasingly anti-American attitudes when they considered sharing their own developments, notably newer ASDIC systems. By 1940 the situation on scientific exchange was entirely deadlocked as a result.
Looking for ways around the deadlock, Henry Tizard sent Archibald Vivian Hill to the US to take a survey of US technical capability in order to better assess what technologies the US would be willing to exchange. This effort was the start on the path that led to the famous Tizard Mission. Ironically, by the time the Mission was being planned, the Norden had been removed from the list of items to be discussed, and Roosevelt personally noted this was due largely to political reasons.
The Norden bombsight was developed during a period of United States non-interventionism when the dominant U.S. military strategy was the defense of the U.S. and its possessions. A considerable amount of this strategy was based on stopping attempted attacks at sea, both with direct naval power, and starting in the 1930s, with USAAF airpower. Most air forces of the era invested heavily in dive bombers or torpedo bombers for these roles, but these aircraft generally had limited range, so long-range strategic reach would require the use of an aircraft carrier. The Army felt the combination of the Norden and B-17 Flying Fortress presented an alternate solution, believing that small formations of B-17s could successfully attack shipping at long distances from the USAAC's widespread bases. The high altitudes the Norden allowed would help increase the range of the aircraft, especially if equipped with a turbocharger, as in the B-17.
In 1940, Barth, president of Carl L. Norden Inc., said that "we do not regard a 15-foot square ... as being a very difficult target to hit from an altitude of 30,000 feet". At some point the company started using the pickle barrel imagery, to re-enforce the bombsight's reputation. In 1943 the Norden company rented Madison Square Garden and folded their own show in between the presentations of the Ringling Bros. and Barnum & Bailey Circus. Their show involved dropping a wooden "bomb" into a pickle barrel, at which point a pickle popped out. However, these claims were greatly exaggerated; in 1940 the average score for an Air Corps bombardier was a circular error of 400 feet, from 15,000 feet instead of 30,000.
Real-world performance was poor enough that the Navy started de-emphasizing level attacks in favour of dive bombing almost immediately. The TBF Avenger included the ability to mount the Norden, like the TBD Devastator before it, but combat use was disappointing and eventually described as "hopeless" during the Guadalcanal Campaign. In spite of giving up on the device in 1942, bureaucratic inertia meant they were supplied as standard equipment until 1944.
USAAF anti-shipping operations in the Far East were generally unsuccessful, and although there were numerous claims of sinkings, the only confirmed successful action was during the Battle of the Philippines when B-17s sank one minesweeper and "damaged" two Japanese transports, the cruiser Naka, and the destroyer Murasame. However these successes were the exception to the rule; actions during the Battle of Coral Sea or Battle of Midway, for instance, were entirely unsuccessful. The USAAF eventually replaced all of their anti-shipping B-17s with other aircraft, and came to use the skip bombing technique in direct low-level attacks.
Air war in Europe
As U.S. participation in the war started, the USAAF drew up widespread and comprehensive bombing plans based on the Norden. They believed the B-17 had a 1.2% probability of hitting a 100 foot target from 20,000 feet, meaning that 220 bombers would be needed to ensure a target's destruction. This was not considered a problem, and the AAF forecast the need for 251 combat groups to provide enough bombers to fulfill their comprehensive pre-war plans.
However, as at sea, in early missions over Europe the Norden likewise demonstrated widely varied results. Over Bremen-Vegesack on 19 March 1943, the 303d Bombardment Group dropped 76 per cent of its load within a 1,000 ft ring, representing a CEP well under 1,000 ft. But on wider inspection, only 50 percent of American bombs fell within a quarter of a mile of the target (1,320 ft), and American flyers estimated that as many as 90 percent of bombs could miss their targets. The average CEP in 1943 was 1,200 feet, meaning that only 16 percent of the bombs fell within 1,000 feet of the aiming point. A 500-pound bomb, standard for precision missions after 1943, had a lethal radius of only 60 to 90 feet.
Faced with these poor results, Curtis LeMay started a series of reforms in an effort to address the problems. In particular, he introduced the "combat box" formation in order to provide maximum defensive firepower by densely packing the bombers. As part of this change, he identified the best bombardiers in his command and assigned them to the lead bomber of each box. Instead of every bomber in the box using their Norden individually, the lead bombardiers were the only ones actively using the Norden, and the rest of the box followed them in formation and then dropped their bombs when they saw the lead's leaving his aircraft. Although this spread the bombs over the area of the combat box, this could still improve accuracy over individual efforts. It also helped stop a problem where various aircraft, all slaved to their autopilots on the same target, would drift into each other. This did improve accuracy, which suggests that much of the problem is attributable to the bombardier. However, precision attacks still proved difficult or impossible.
When Jimmy Doolittle took over command of the 8th Air Force from Ira Eaker in early 1944, precision bombing attempts were dropped. Area bombing, like the RAF efforts, were widely used with 750 and then 1000 bomber raids against large targets. The main targets were railroad marshaling yards (27.4 percent of the bomb tonnage dropped), airfields (11.6 percent), oil refineries (9.5 percent), and military installations (8.8 percent). To some degree the targets were secondary missions; Doolittle used the bombers as an irresistible target to draw up Luftwaffe fighters into the ever-increasing swarms of Allied long-distance fighters. As these missions broke the Luftwaffe, missions were able to be carried out at lower altitudes, especially in bad weather when the H2X radar could be used. In spite of abandoning precision attacks, accuracy nevertheless improved. By 1945, the 8th was putting up to 60 percent of its bombs within 1,000 feet, a CEP of about 900 feet.
Postwar analysis placed the overall accuracy of daylight precision attacks with the Norden at about the same level as radar bombing efforts. The 8th Air Force put 31.8 percent of its bombs within 1,000 feet from an average altitude of 21,000 feet, the 15th Air Force averaged 30.78 percent from 20,500 feet, and he 20th Air Force against Japan averaged 31 percent 16,500 feet.
Many factors have been put forth to explain the Norden's poor real-world performance. Over Europe, the cloud cover was a common explanation, although performance did not improve even in favorable conditions. Over Japan, bomber crews soon discovered strong winds at high altitudes, the so-called jet streams, but the Norden bombsight worked only for wind speeds with minimal wind shear. Additionally, the bombing altitude over Japan reached up to 30,000 feet (9,100 m), but most of the testing had been done well below 20,000 ft (6,100 m). An additional factor was that the shape and even the paint of the bomb mantle greatly changed the aerodynamic properties of the weapon; and, at that time, nobody knew how to calculate the trajectory of bombs that reached supersonic speeds during their fall.
Still pursuing precision attack, various remotely guided weapons were developed, notably the AZON and RAZON bombs and similar weapons.
Production, Army standardization
The conversion of the company's New York City engineering lab to a production factory was a long process. Before the war, skilled craftsmen, most of them German or Italian immigrants, hand-made almost every part of the 2,000-part machine. Between 1932 and 1938, the company produced only 121 bombsights per year. During the first year after the Attack on Pearl Harbor, Norden produced 6,900 bombsights, three-quarters of which went to the Navy.
By May 1943 the Navy was complaining that they had a surplus of devices, and full production was turned over to the Army Air Forces. After investing more than $100 million in Sperry bombsight manufacturing plants, the AAF concluded that the Norden M-series was far superior in accuracy, dependability, and design. Sperry contracts were canceled in November 1943. When production ended a few months later, 5,563 Sperry bombsight-autopilot combinations had been built, most of which were installed in B-24 Liberator bombers.
Expansion of the production to a final total of six factories took several years. The Army Air Forces demanded additional production to meet their needs, and eventually arranged for the Victor Adding Machine company to gain a manufacturing license, and then Remington Rand. Ironically, during this period the Navy abandoned the Norden in favour of dive bombing, reducing the demand. By the end of the war, Norden and its subcontractors had produced 72,000 M-9 bombsights for the Army Air Force along, costing $8,800 each.
Since the Norden was considered a critical wartime instrument, bombardiers were required to take an oath during their training stating that they would defend its secret with their own life if necessary. In case the bomber plane should make an emergency landing on enemy territory, the bombardier would have to shoot the important parts of the Norden with a gun to disable it. As this method still would leave a nearly intact apparatus to the enemy, a thermite grenade was installed; the heat of the chemical reaction would melt the Norden into a lump of metal. The Douglas TBD Devastator torpedo bomber was originally equipped with flotation bags in the wings to aid the aircrew's escape after ditching, but they were removed once the Pacific War began; this ensured that the aircraft would sink, taking the Norden with it.
After each completed mission, bomber crews left the aircraft with a bag which they deposited in a safe ("the Bomb Vault"). This secure facility ("the AFCE and Bombsight Shop") was typically in one of the base's Nissen hut (Quonset hut) support buildings. The Bombsight Shop was manned by enlisted men who were members of a Supply Depot Service Group ("Sub Depot") attached to each USAAF bombardment group. These shops not only guarded the bombsights but performed critical maintenance on the Norden and related control equipment. This was probably the most technically skilled ground-echelon job, and certainly the most secret, of all the work performed by Sub Depot personnel. The non-commissioned officer in charge and his staff had to have a high aptitude for understanding and working with mechanical devices.
As the end of World War II neared, the bombsight was gradually downgraded in its secrecy; however, it was not until 1944 that the first public display of the instrument occurred.
In spite of the security precautions, the entire Norden system had been passed to the Germans before the war started. Herman W. Lang, a German spy, had been employed by the Carl L. Norden Company. During a visit to Germany in 1938, Lang conferred with German military authorities and reconstructed plans of the confidential materials from memory. In 1941, Lang, along with the 32 other German agents of the Duquesne Spy Ring, was arrested by the FBI and convicted in the largest espionage prosecution in U.S. history. He received a sentence of 18 years in prison on espionage charges and a two-year concurrent sentence under the Foreign Agents Registration Act.
German instruments were actually fairly similar to the Norden, even before World War II. A similar set of gyroscopes provided a stabilized platform for the bombardier to sight through, although the more complex interaction between the bombsight and autopilot was not used. The Carl Zeiss Lotfernrohr 7, or Lotfe 7, was an advanced mechanical system similar to the U.S' Norden bombsight, or in form to the Sperry S-1. It started replacing the simpler Lotfernrohr 3 and BZG 2 in 1942, and emerged as the primary late-war bombsight used in most Luftwaffe level bombers. The use of the autopilot allowed single-handed operation, and was key to bombing use of the single-crewed Arado Ar 234.
In the postwar era the development of new precision bombsights essentially ended. At first this was due to the military drawdown, but as budgets increased again during the opening of the Cold War, the bomber mission had passed to nuclear weapons. These required accuracies on the order of 3,000 yards, well within the capabilities of existing radar bombing systems. Only one major bombsight of note was developed, the Y-4 developed on the B-47 Stratojet. This sight combined the images of the radar and a lens system in front of the aircraft, allowing them to be directly compared at once through a binocular eyepiece.
Bombsights on older aircraft, like the B-29 Superfortress and the later B-50, were left in their wartime state. When the Korean War opened these aircraft were pressed into service and the Norden once again became the USAF's primary bombsight. This occurred again when the Vietnam War started, in this case retired WWII technicians had to be called up in order to get the bombsights operational. Its last use in combat was by the Naval Air Observation Squadron Sixty-Seven (VO-67), during the Vietnam War. The bombsights were used in Operation Igloo White for implanting Air-Delivered Seismic Intrusion Detectors (ADSID) along the Ho Chi Minh Trail.
Description and operation
Typical bombsights of the pre-war era worked on the "vector bombsight" principle introduced with the World War I Course Setting Bomb Sight. These systems consisted of a slide rule-type calculator that was used to calculate the effects of the wind on the bomb based on simple vector arithmetic. The principles are identical to those on the E6B calculator used to this day. In operation, the bombardier would first take a measurement of the wind speed by various methods, and then use that speed and direction to calculate the effects of the wind on the bomb after it was dropped. The aircraft's speed and direction were then used to set up an iron sight system, then adjusted for the wind effects.
These systems had two primary problems in terms of accuracy. The first was that there were several steps that had to be carried out in sequence in order to set up the bombsight correctly, and there was limited time to do all of this during the bomb run. As a result, the accuracy of the wind measurement was always limited, and errors in setting the equipment or making the calculations were common. The second problem was that the sight was attached to the aircraft, and thus moved about during manoeuvres, during which time the bombsight would not point at the target and could not be used. As the aircraft had to manoeuvre in order to make the proper approach to the target, this limited the time allowed to accurately make corrections. This combination of issues demanded a long bomb run.
Experiments had shown that adding a stabilizer system to a vector bombsight would roughly double the accuracy of the system. This would allow the bombsight to remain level while the aircraft manoeuvred, giving the bombardier more time to make their adjustments, as well as reducing or eliminating mis-measurements when sighting off of non-level sights. However, this would not have any effect on the accuracy of the wind measurements, nor the calculation of the vectors. The Norden attacked all of these problems.
To improve the calculation time, the Norden used a mechanical computer inside the bombsight to calculate the range angle of the bombs. By simply dialling in the aircraft's altitude and heading, along with estimates of the wind speed and direction (in relation to the aircraft), the computer would automatically, and quickly, calculate the aim point. This not only reduced the time needed for the bombsight setup, but also dramatically reduced the chance for errors. This attack on the accuracy problem was by no means unique, several other bombsights of the era used similar calculators. It was the way the Norden used these calculations that was different.
Conventional bombsights are set up pointing at a fixed angle, the range angle, which accounts for the various effects on the trajectory of the bomb. Looking through the sights, its crosshairs indicate the location on the ground where the bombs would impact if released at that instant. As the aircraft moves forward, the target approaches the crosshairs from the top, and the bombardier releases the bombs as it passes through them. One example of a highly automated system of this type was the RAF's Mark XIV bomb sight.
The Norden worked in an entirely different fashion, the "synchronous" or "tachometric" method. Internally, the calculator continually computed the impact point, as was the case for previous systems. However, the resulting range angle was not displayed directly to the bombardier or dialled into the sights. Instead, the bombardier used the sighting telescope to locate the target long in advance of the drop point. The calculator used the inputs for altitude and airspeed to determine the angular velocity of the target, and then used a rotating prism to attempt to keep the target centred. So while conventional bombsights waited for the visibly moving target to approach the fixed range angle, with the Norden, one waited for the visibly fixed target to approach the (hidden) moving range angle.
It was the difference between the two calculated values, the current range angle (to the impact point) and the current angle to the target measured from the telescope, that determined the direction and distance the aircraft had to travel in order to take it over the proper drop point. As the bomber approached the target, the difference between the range and target angles would be continually reduced, eventually to zero (within the accuracy of the mechanisms). At this moment the Norden automatically dropped the bombs.
The reason for this additional complexity was that the target generally did not stay centred in the sighting telescope when it was first set up. Instead, due to inaccuracies in the estimated wind speed and direction, the target would drift out of the crosshairs in the sight. To correct for this, the bombardier would use fine-tuning controls to slowly cancel out any motion through trial and error. These adjustments had the effect of updating the measured ground speed used to calculate the motion of the prisms, slowing the visible drift. Over a short period of time of continual adjustments, the drift would stop, and the bombsight would now hold an extremely accurate measurement of the exact groundspeed and heading. Better yet, these measurements were being carried out on the bomb run, not before it, it helped eliminate inaccuracies due to changes in the conditions as the aircraft moved. And by eliminating the manual calculations, the bombardier were left with much more time to adjust their measurements, and thus settle at a much more accurate result. Conventional systems would estimate wind speed using a drift telescope or dead reckoning, but this was time consuming to calculate, and did not offer anywhere near the accuracy of the Norden.
The angular speed of the prism changes with the range of the target; consider the reverse situation, the apparent high angular speed of an aircraft passing overhead compared to its apparent speed when it is seen at longer distance. In order to properly account for this non-linear effect, the Norden used a system of slip-disks similar to those used in differential analysers. However, this slow change at long distances made it difficult to fine tune the drift early in the bomb run. In practice, bombardiers would often set up their groundspeed measurements in advance of approaching the target area by selecting a convenient "target" on the ground that was closer to the bomber and thus had more obvious motion in the sight. These values would then be used as the initial setting when the target was later sighted.
The Norden bombsight consisted of two primary parts, the gyroscopic stabilization platform on the left side, and the mechanical calculator and sighting head on the right side. They were largely separate instruments, connecting through the sighting prism. The sighting eyepiece was located in the middle, between the two, in a less than convenient location that required some dexterity to use.
Before use, the Norden's stabilization platform had to be "righted", as it slowly drifted over time and no longer kept the sight pointed "up". This was accomplished in a time consuming process of comparing the platform's attitude to small spirit levels seen through a glass window on the front of the stabilizer. In practice, this could take as long as eight and a half minutes. This problem was made worse by the fact that the platform's range of motion was limited, and could be "tumbled" even by strong turbulence, requiring it to be reset again. This problem seriously upset the usefulness of the Norden, and led the RAF to reject it once they received examples in 1942. Some versions included a system that quickly righted the platform, but this "Automatic Gyro Leveling Device" proved to be a maintenance problem, and was removed from later examples.
Once the stabilizer was righted, the bombardier would then dial in the initial setup for altitude, speed and direction. The prism would then be "clutched out" of the computer, allowing it to be moved rapidly to search for the target on the ground. Later Nordens were equipped with a reflector sight to aid in this step. Once the target was located the computer was clutched in and started moving the prism to follow the target. The bombardier would begin making adjustments to the aim. As all of the controls were located on the right, and had to be operated while sighting through the telescope, another problem with the Norden is that the bombardier could only adjust either the vertical or horizontal aim at a given time, their other arm was normally busy holding them up above the telescope.
On top of the device, to the right of the sight, were two final controls. The first was the setting for "trail", which was pre-set at the start of the mission for the type of bombs being used. The second was the "index window" which displayed the aim point in numerical form. The bombsight calculated the current aim point internally, and displayed this as a sliding pointer on the index. The current sighting point, where the prism was aimed, was also displayed against the same scale. In operation, the sight would be set far in advance of the aim point, and as the bomber approached the target the sighting point indicator would slowly slide toward the aim point. When the two met, the bombs were automatically released. The aircraft was moving over 350 feet per second (110 m/s), so even minor interruptions in timing could dramatically affect aim.
Early examples, and those in Navy use, had an output that directly drove a Pilot Direction Indicator meter in the cockpit. This eliminated the need to manually signal the pilot, as well as eliminating the possibility of error.
In USAAC use, the entire bombsight was attached to a second device, the "Automatic Flight Control Equipment" (AFCE), an autopilot system. The AFCE could be used during the flight to the target area through a control panel in the cockpit, but was more common used under direct command of the bombardier. The AFCE sat behind and below the Norden and attached to it at a single rotating point. On the bomb run, the bombardier would first rotate the entire Norden so the vertical line in the sight passed through the target, and then clutched in the AFCE. From that point on, the AFCE would attempt to guide the bomber so it followed the course of the bombsight, and pointed the heading to zero out the drift rate, fed to it through a coupling. The AFCE was another reason for the Norden's accuracy, as it ensured the aircraft quickly followed the correct course and kept it on that course much more accurately that the pilots could.
Later in the war the Norden was combined with other systems to widen the conditions for successful bombing. Notable among these as the radar system called the H2X (Mickey), which were used directly with the Norden bombsight. The radar proved most accurate in coastal regions, as the water surface and the coastline produced a distinctive radar echo.
- Stabilizing Automatic Bomb Sight (SABS) a Royal Air Force bomb sight introduced for precision bombing with similar capabilities to the Norden bomb sight.
- Lotfernrohr 7, a German equivalent
- ^ Different sources disagree on Norden's time at Sperry. Most place him there between 1911 and 1915, Moy and Sherman state he left in 1913, and Moy implies he worked there since 1904.
- ^ Stephan Wilkinson, "Man and Machine: The Best of Stephan Wilkinson", Globe Pequot, 2005, p. 53
- ^ a b "Federal Bureau of Investigation: Frederick Duquesne Interesting Case Write-up" (PDF). Federal Bureau of Investigation (publicly released on March 12, 1985 under the Freedom of Information Act). http://foia.fbi.gov/foiaindex/duquesne_frederick_interesting.htm. Retrieved 2007–05–12.
- ^ a b c d e f g h Sherman 1995.
- ^ a b c Moy 2001, p. 84.
- ^ a b c Moy 2001, p. 85.
- ^ a b Moy 2001, p. 86.
- ^ Moy 2001, p. 87.
- ^ a b Moy 2001, p. 88.
- ^ "Naval Aviation Chronology 1930-1939", US Navy, 30 June 1997
- ^ "Precision Bombing: sample mission shows details that make it work", Life, 30 August 1943, p. 97
- ^ Searle 1989, p. 61.
- ^ a b Searle 1989, p. 62.
- ^ Flight August 1945 p180
- ^ a b c Searle 1989, p. 64.
- ^ Zimmerman 1996, p. 34.
- ^ a b Zimmerman 1996, p. 35.
- ^ Zimmerman 1996, p. 36.
- ^ Zimmerman 1996, p. 37.
- ^ a b c d e Zimmerman 1996, p. 38.
- ^ Zimmerman 1996, p. 50.
- ^ Zimmerman 1996, p. 99.
- ^ a b c d Correll 2008, p. 61.
- ^ a b Correll 2008, p. 60.
- ^ "New York Bomb", Life, 26 April 1943, p. 27
- ^ Alvin Kernan, Donald Kagan & Frederick Kagan, "The Unknown Battle of Midway", Yale University Press, 2007, p. 51
- ^ Barrett Tillman, "Avenger at War", Ian Allan, 1979, p. 53
- ^ Robert Cressman, "The Official Chronology of the U.S. Navy in World War II", Naval Institute Press, 2000, p. 62
- ^ Gene Eric Salecker, [http://books.google.ca/books?id=SlHUI_wWgGAC&pg=PA171&dq=b-17+coral+sea&hl=en&ei=UtGzTtjeCsPZ0QGXq_i4BA&sa=X&oi=book_result&ct=result&resnum=4&ved=0CD0Q6AEwAw#v=onepage&q=b-17%20coral%20sea&f=false "Fortress Against the Sun", Da Capo Press, 2001, p. 171
- ^ "Midway-based Bomber Attacks on the Japanese Carrier Striking Force, 4 June 1942", US Navy, 20 April 1999
- ^ Geoffery Perrett, "There's a War to Be Won: The United States Army in World War II" (1991) p. 405
- ^ Edward K. Eckert, "In War and Peace: An American Military History Anthology" (1990) p. 260
- ^ Micheal C.C. Adams, "The Best War Ever: America in World War Two" (1994) p.54
- ^ Correll 2008, p. 62.
- ^ a b Correll 2008, p. 63.
- ^ Correll 2008, p. 64.
- ^ a b c Ross: Strategic Bombing by the United States in World War II
- ^ "Business & Finance: A Bomb on Norden". TIME magazine. 1945-01-01 [T]he Norden company, ordered by the Navy Department to turn over bombsight plans to Remington Rand Inc., which was to build 8,500 "football units" (the main computing part), [...]. http://www.time.com/time/magazine/article/0,9171,791851,00.html.
- ^ "The Aviation Factfile: Aircraft of World War II" (2004) p.79
- ^ "Y-4 Horizontal Periscopic Bombsight"', US Air Force Museum, 21 January 2009
- ^ "Norden: Last Combat Use", Observation Squadron Sixty-Seven (VO-67),
- John Correll, "Daylight Precision Bombing", Airforce Magazine, October 2008, pp. 60-64
- Don Sherman, "The Secret Weapon", Air & Space Magazine, February/March 1995
- Timothy Moy, "War Machines: transforming technologies in the U.S. military, 1920-1940", Texas A&M University Press, 2001
- Loyd Searle, "The Bombsight War: Norden vs. Sperry", IEEE Spectrum September 1989, pp. 60-64
- David Zimmerman, "Top Secret Exchange: the Tizard Mission and the Scientific War", McGill-Queen's Press, 1996
- Stewart Halsey Ross: "Strategic Bombing by the United States in World War II"
- Albert L. Pardini: "The Legendary Norden Bombsight" ISBN 0-7643-0723-1, Schiffer Publishing, 1999.
- "Bombardier: A History", Turner Publishing, 1998
- "The Norden Bombsight
- "Bombing – Students' Manual"
- "Bombardier's Information File"
- Stephen McFarland: "America's Pursuit of Precision Bombing, 1910-1945"
- "Burroughs Corporation Records. Pasinski Family Papers, 1912-1984". http://purl.umn.edu/40915. Charles Babbage Institute, University of Minnesota. Pasinski produced the prototype for the bombsight. He designed production tools and supervised production of the bombsight at Burroughs Corporation.
- Burroughs Corporation Records. World War II Era Records, 1931-1946, Charles Babbage Institute, University of Minnesota. Information on the Norden bombsight, which Burroughs produced beginning in 1942.
- Flight 1945 Norden Bomb Sight
- How the Norden Bombsight Does Its Job by V. Torrey, June 1945 Popular Science
- "The Bombsight That Thinks." Popular Mechanics, February 1945, p.7-10.
- Norden Bombsight from the Hill Aerospace Museum
- U.S. Centennial of Flight Commission
- images and information from twinbeech.com
- WWII AAF collection (Bombardiers Information File)
- 463rd Sub Depot, 389th Bomb Group
- (Movies of the Norden and Sperry Bombsights in operation)
- Articles and Links from Norden Club website
- Item on use of Norden Bombsight in WW II
- Malcolm Gladwell: The strange tale of the Norden bombsight at TED
- This article incorporates public domain material from the United States Government document "http://foia.fbi.gov/foiaindex/duquesne_frederick_interesting.htm Federal Bureau of Investigation: Frederick Duquesne Interesting Case Write-up (publicly released on March 12, 1985 under the Freedom of Information Act)". Accessed: 2007–05–12
Wikimedia Foundation. 2010.
Look at other dictionaries:
Norden (disambiguation) — Norden may refer to several things. Contents 1 Geography 2 People 3 Music 4 Miscellanea Geography the Scandinavian name for the … Wikipedia
Norden — may refer to several things. Geography * the Scandinavian name for the Nordic countries [http://www.fotw.net/flags/xn nordn.html] . * Norden, Lower Saxony: a town in Lower Saxony, Germany. * Norden Township, Minnesota: a township in Minnesota,… … Wikipedia
Bombsight — A bombsight is a device used by bomber aircraft to assist in the task of accurately dropping bombs on a ground target. Although it could be as simple as a set of crosshairs, the term generally refers to more complicated devices that allow… … Wikipedia
Viseur Norden — Une page du Bombardier s Information File … Wikipédia en Français
Mira Norden — Cabezal de puntería de la Mira Norden. Una página del Bombardier s … Wikipedia Español
Carl Norden — Carl Lucas Norden (April 23, 1880 – 1965) was a Dutch born American engineer, born in Semarang, Java and educated at the ETH Zurich in Switzerland. Norden emigrated to the United States in 1904.Along with Elmer Sperry, he worked the first… … Wikipedia
Mark XIV bomb sight — The Mk. XIVA sighting head, which would be mounted in the front of the aircraft and connected to the computor by the cables coiled up on the left. The main features are the gyrostabilizer in the large cylinder, and the collimator on the moving… … Wikipedia
Lotfernrohr 7 — The Carl Zeiss Lotfernrohr 7, or Lotfe 7, was the primary late war bombsight used in most Luftwaffe level bombers. It started replacing the simpler Lotfernrohr 3 and BZG 2 in 1942, eventually replacing them completely. It was an advanced… … Wikipedia
Course Setting Bomb Sight — The CSBS Mk. IX mounted in a Fairey Battle. The bomb aimer is sighting through the white ring shaped backsights to the pin shaped foresights (just visible against the armoured cable) and holding the bomb release switch in his right hand. The… … Wikipedia
Duquesne Spy Ring — The 33 convicted members of the Duquesne spy ring (FBI print). The Duquesne Spy Ring is the largest espionage case in United States history that ended in convictions. A total of thirty three members of a German espionage network headed by… … Wikipedia