Dewvaporation

Dewvaporation
DewVaporator "cell" schematic

Dewvaporation is a novel desalination technology developed at Arizona State University (Tempe) as an energy efficient tool for freshwater procurement and saline waste stream management. The system has relative low installment costs and low operation and maintenance requirements[1].

The process uses air as a carrier gas[2] that transfers water vapor from ascending evaporative channels to adjacent, descending dew-forming channels. Thermal communication across the channel boundaries allows the evaporative energy requirement to be fully satisfied by the heat of fusion on the dew forming side. A small pressure difference[3] is held so that the condensing cooler air is kept on the cool side by a slight pressure difference.

Near atmospheric operation permits corrosion free and scale-resistant polypropylene construction, and also allows the use of low-grade heat to drive the process.

The process is proprietary, developed by Dr. James R. Beckman[4]. Currently, Altella Inc. (Albuquerque, NM) is manufacturing this technology under the Altellarain trade name.

Contents

Detailed process

According to the Bureau of Reclamation, a branch of the US Department of Interior[5], this process uses simple corrugated plastic tanks with many "DewVaporation columns" inserted in each tank[6]. Each column is made of corrugated plastic and is divided into two compartments. The wall in the middle serves for receiving and evaporating sea-water into a hot air stream, and on the other side for condensing freshwater. The cooling from the evaporation helps water condensate on the dividing wall, while the energy from the condensing vapor, now turned to droplets, passes back to the evaporation side, and is absorbed in the evaporating sea water. This way, much of the energy (as heat) is left in the process, and is not removed with the air leaving the DewVaporation column.

Various improvements have been proposed, among those reusing the output brine and adding external heat in a stacked way, so that the pressure and humidity gap between the two sides of the column are optimal and constant.

External links

References

  1. ^ Research results from 2000 by the US Bureau of Reclamation
  2. ^ Brackish and seawater desalination using a 20 ft2 dewvaporation tower 200] article published by Arizona State University] on the Science Direct webesite
  3. ^ Less than 1 PSI according to the patent application from 2008
  4. ^ James R. Beckman USPTO Patent application number: 7,431,805 James R. Beckman 2008 Method and apparatus for simultaneous heat and mass transfer utilizing a carrier-gas at various absolute pressures. As listed in the patent, the invention was a follow up on an earlier filing from 2003, and earlier work from 1989 published in conjunction with Walter F. Albers. The development was partially funded by the US government.
  5. ^ USBR
  6. ^ Figure 5. Top View of Tower

See also


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Desalination — This article is about removing salt from water. For soil desalination, see Soil salinity control. Water desalination Methods Distillation Multi stage flash distillation (MSF) Multiple effect distillation (MED|ME) Vapor compression (VC) Ion… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”