Disk cloning

Disk cloning

Disk cloning is the process of copying the contents of one computer hard disk to another disk or to an "image" file. Often, the contents of the first disk are written to an image file as an intermediate step, and the second disk is loaded with the contents of the image. This procedure is also useful when moving to a larger capacity disk or to restore the disk to a previous state.

Contents

Common Uses

There are a number of notable uses for disk cloning software. These include:

  • Reboot and restore – a technique in which the disk of a computer is automatically wiped and restored from a "clean", master image, which should be in full working order and should have been swept for viruses. This is used by some cybercafes and some training and educational institutes, and helps ensure that even if a user does misconfigure something, downloads inappropriate content or programs, or infects a computer with a virus, the computer will be restored to a clean, working state. The reboot and restore process can either take place irregularly when a computer shows signs of malfunctioning, on a regular basis (e.g., nightly) or even, in some cases, every time a user logs off, which is the safest approach (although that does involve some downtime).
  • Provisioning new computers – Provisioning with a standard set of software so that a new user is ready to go straight away with a complete application suite and does not have to waste time installing individual applications. This is often done by original equipment manufacturers and larger companies.
  • Hard drive upgrade – An individual user may use disk copying (cloning) to upgrade to a new, usually larger, hard disk.
  • Full system backup – A user may create a comprehensive backup of their operating system and installed software.
  • System recovery – An OEM can provide media that can restore a computer to its original factory software configuration
  • Transfer to another user – A system sold or given to another person may be reset by reloading a known, previously-saved image that contains no personal files or information.

How it works

This article is specific to disk cloning on the x86 platform; specific details may not apply to other platforms.

To provision the hard disk of a computer without using disk cloning software, the following steps are generally required for each computer:

  1. Create one or more partitions on the disk
  2. Format each partition to create a file system on it
  3. Install the operating system
  4. Install device drivers for the particular hardware
  5. Install application software

With disk cloning, this is simplified to:

  1. Install the first computer, as above.
  2. Create an image of the hard disk (optional)
  3. Clone the first disk, or its image, to the remaining computers.

This can be referred to simply as a recovery disc.

History

Before Windows 95, some computer manufacturers used hardware disk copying machines to copy software. This had the disadvantages of copying not just the used data on the disk, but also unused sectors, as the hardware used was not aware of the structures on the disks. A larger hard disk could not be copied to a smaller one, and copying a smaller one to a larger left the remaining space on the new disk unused. The two disks required identical geometries.

Other manufacturers and companies partitioned and formatted disks manually, then used file copy utilities or archiving utilities, such as tar or zip to copy files. It is not sufficient simply to copy all files from one disk to another, because there are special boot files or boot tracks which must be specifically placed for an operating system to run, so additional manual steps were required.

Windows 95 compounded the problems because it was larger than earlier popular operating systems, and thus took more time to install. The long filenames added to the FAT filesystem by Microsoft in Windows 95 were not supported by most copy programs, and the introduction of the FAT32 filesystem in 1997 caused problems for others. The growth of the personal computer market at this time also made a more efficient solution desirable.

Ghost was introduced in 1996 by Binary Research. It initially supported only FAT filesystems directly, but it could copy but not resize other filesystems by performing a sector copy on them. Ghost added support for the NTFS filesystem later that year, and also provided a program to change the Security Identifier (SID) which made Windows NT systems distinguishable from each other. Support for the ext2 filesystem was added in 1999.

Competitors to Ghost soon arose, and a features war has carried on to the present day. Many disk cloning programs now offer features which go beyond simple disk cloning, such as asset management and user settings migration.

On UNIX based computer systems, dd was more commonplace due to the lack of filesystem support in Ghost.

Post-cloning operations

Two machines with identical names are said not to be allowed on the same network, and, for Windows NT and its successors, two machines with identical security IDs (SIDs, aka Security Identifier) are said not to be allowed on the same Active Directory domain.[1][2][note 1] A disk cloning program should change these as part of copying the disk or restoring the image. Some operating systems are also not well suited to changes in hardware, so that a clone of Windows XP for example may object to being booted on a machine with a different motherboard, graphics card and network card, especially if non-generic drivers are used. Microsoft's solution to this is Sysprep, a utility which runs hardware detection scans and sets the SID and computer name freshly when the machine boots. Microsoft recommends that Sysprep be set up on all machines before cloning, rather than allow third party programs to configure them. Similarly, Linux systems simply require the necessary kernel modules to be available (or compiled directly into the kernel), in order to support new hardware when the machine boots. However there are ways to help make images for cloning with Windows more portable. One such example would be a product called Universal Imaging Utility from Binary Research (original developers of Symantec's Ghost) which incorporates a large number of hardware device drivers into the sysprep routine.

When it comes to "Domain SID", the Domain SID is recomputed each time a computer enters a domain. Thus, all the "post-cloning operations" that are based on "leave the domain and then rejoin the domain" will actually cause a re-creation of the Domain SID for the computer that joins the domain.

In other words, duplicated SIDs are usually not a problem with Microsoft Windows systems

There are files in some Microsoft operating systems (called BOOTSECT.*) which are copies of the Boot Partition Block (BPB) used by alternate operating systems that Microsoft Windows loader (NTLDR) can load. BOOTSECT.* files may have to be altered if partition sizes or layouts are changed during the clone.

Linux systems usually boot using either the LILO or GRUB bootloaders. These contain lists of absolute disk sectors in their MBR, which must be altered by the cloning program as the files they refer to are likely not to be in the same location of the destination disk. For example, if the original boot loader script points to the system being on a disk on channel 0 and the system being of the second partition, the target computer will need to have the same configuration.

Operating environment

A disk cloning program needs to be able to read even protected operating system files on the source disk, and must guarantee that the system is in a consistent state at the time of reading. It must also overwrite any operating system already present on the destination disk. To simplify these tasks, most disk cloning programs can run under an operating system different from the native operating system of the host computer, for example, MS-DOS or an equivalent such as PC-DOS or DR-DOS, or Linux. The computer is booted from this operating system, the cloning program is loaded and copies the Windows file system. Many programs (e.g. Acronis True Image) can clone a disk, or make an image, from within Windows, with special provision for copying open files; but an image cannot be restored onto the Windows System Drive under Windows.

A disc cloning program running under non-Windows operating systems must have device drivers or equivalent for all devices used. The manufacturers of some devices do not provide suitable drivers, so the manufacturers of disk cloning software must write their own drivers, or include device access functionality in some other way. This applies to tape drives, CD and DVD readers and writers, and USB and FireWire drives. Cloning software contains its own TCP/IP stack for multicast transfer of data where required.

Image transfer

The simplest method of cloning a disk is to have both the source and destination disks present in the same machine, but this is often not possible. Disk cloning programs can link two computers by a parallel cable, or save and load images to an external USB drive or network drive. As disk images tend to be very large (usually a minimum of several hundred MB), performing several clones at a time puts excessive stress on a network. The solution is to use multicast technology. This allows a single image to be sent simultaneously to many machines without putting greater stress on the network than sending an image to a single machine.

Image manipulation

Although disk cloning programs are not primarily backup programs, they are sometimes used as such. A key feature of a backup program is to allow the retrieval of individual files without needing to restore the entire backup. Disk cloning programs either provide a Windows Explorer-like program to browse image files and extract individual files from them, or allow an image file to be mounted as a read-only filesystem within Windows Explorer.

Some such programs allow deletion of files from images, and addition of new files.

OS-Specific Imaging Utilities

Windows Deployment Services

Disk Utility (mac)

See also

Notes

  1. ^ The problem with duplicated SIDs in a Workgroup of computers running Windows NT/2K/XP is only related to different user accounts having the same SID. This could lead to unexpected access to shared files or files stored on a removable storage: If some ACLs (Access control lists) are set on a file, the actual permissions can be associated with a user SID. If this user SID is duplicated on a cloned computer (because the computer SID is duplicated and because the user SIDs are built based on the computer SID + a sequential number), a user of a second computer (cloned from the first one) could have access to the files that the user of a first computer has protected.

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Disk cloning — Liste des logiciels de Clonage Acronis True Image : logiciel commercial de la société Acronis (pour le logiciel, voir (en) Acronis True Image) UltraBac UBDR GOLD : logiciel commercial dd : la commande de base Linux/Unix (permet de… …   Wikipédia en Français

  • Comparison of disk cloning software — This is a comparison of disk cloning software. See also: List of disk cloning software Contents 1 Table 1.1 Notes 1.2 Creating a Live USB 2 Other disk cloning applicatio …   Wikipedia

  • List of disk cloning software — See Also: Comparison of disk cloning software Contents 1 Platform independent 2 Windows 3 Mac 4 Linux 5 …   Wikipedia

  • Cloning (disambiguation) — Cloning is the process of making an identical copy of something. Cloning may also refer to: Cloning (programming), the copying of a programming object Disk cloning, the copying of the contents of a computer hard disk to a storage medium or file… …   Wikipedia

  • Disk image — CD image redirects here. For ISO 9660 image files, see ISO image. A disk image is a single file or storage device containing the complete contents and structure representing a data storage medium or device, such as a hard drive, tape drive,… …   Wikipedia

  • Disk editor — A disk editor is a computer program that allows its user to read, edit, and write raw data (at character or hexadecimal, byte levels) on disk drives (e.g., hard disks, USB flash disks or removable media such as a floppy disks); as such, they are… …   Wikipedia

  • Disk mirroring — In data storage, disk mirroring or RAID1 is the replication of logical disk volumes onto separate physical hard disks in real time to ensure continuous availability. A mirrored volume is a complete logical representation of separate volume copies …   Wikipedia

  • Disk-to-disk — The term disk to disk , or D2D , generally refers to disk to disk backup. With D2D, a computer hard disk is backed up to another hard disk rather than to a tape or floppy. D2D is often confused with virtual tape, but differs in that it enables… …   Wikipedia

  • Disk Utility — Developer(s) Apple Inc …   Wikipedia

  • Hard disk drive — Hard drive redirects here. For other uses, see Hard drive (disambiguation). Hard disk drive Mechanical interior of a modern hard disk drive Date invented 24 December 1954 [1] …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”