Null modem

Null modem
A null modem adapter

Null modem is a communication method to connect two DTEs (computer, terminal, printer etc.) directly using an RS-232 serial cable. The name stems from the historical use of the RS-232 cable to connect two teleprinter devices to modems in order to communicate with one another; null modem communication was possible by instead using RS-232 to connect the teleprinters directly to one another.

The RS-232 standard is asymmetrical as to the definitions of the two ends of the communications link so it assumes that one end is a DTE and the other is a DCE e.g. a modem. With a null modem connection the transmit and receive lines are crosslinked. Depending on the purpose, sometimes also one or more handshake lines are crosslinked. Several wiring layouts are in use because the null modem connection is not covered by a standard.

Contents

Origin

Originally, the RS-232 standard was developed and used for teleprinter machines which could communicate with each other over phone lines. Each teleprinter would be physically connected to its modem via an RS-232 connection and the modems could call each other to establish a remote connection between the teleprinters. If a user wished to connect two teleprinters directly without modems (null modem) then they would crosslink the connections. The term null modem may also refer to the cable or adaptor itself as well as the connection method.

Cables and adapters

A null modem cable

A null modem cable is an RS-232 serial cable where the transmit and receive lines are crosslinked. In some cables there are also handshake lines crosslinked. In many situations a straight through serial cable is used, together with a null modem adapter. The adapter contains the necessary crosslinks between the signals.

Pin mapping

DE-9 null modem wiring diagram
DB-25 null modem wiring diagram

This is one very common mapping which will work with software that relies on proper assertion of the CD signal.

Signal Name and Abbreviation DB-25 Pin DE-9 Pin Direction DE-9 Pin DB-25 Pin Signal Name Abbreviation
Frame Ground (chassis) FG 1 - - 1 FG
Transmitted Data (TD) TxD 2 3 > 2 3 RxD
Received Data (RD) RxD 3 2 < 3 2 TxD
Request To Send RTS 4 7 > 8 5 CTS
Clear To Send CTS 5 8 < 7 4 RTS
Signal Ground SG 7 5 5 7 SG
Data Set Ready DSR 6 6 < 4 20 DTR
Data Carrier Detect (CD) DCD 8 1
Data Terminal Ready DTR 20 4 > 1 8 DCD
6 6 DSR

Applications

The original application of a null modem was to connect two teleprinter terminals directly without using modems. As the RS-232 standard was adopted by other types of equipment, designers needed to decide whether their devices would have DTE-like or DCE-like interfaces. When an application required that two DTE's (or two DCE's) needed to communicate with each other, then a null modem was necessary.

Null modems were commonly used for file transfer between computers, or remote operation. Under the Microsoft Windows operating system, the direct cable connection can be used over a null modem connection. The later versions of MS-DOS were shipped with the InterLnk program. Both pieces of software allow the mapping of a hard disk on one computer as a network drive on the other computer. No Ethernet hardware (such as a network interface card or a modem) is required for this.

The popularity and availability of faster information exchange systems such as Ethernet made the use of null modem cables less common. Nowadays, such a cable can still be useful for kernel mode development, since it allows the user to remotely debug a kernel with a minimum of device drivers and code (a serial driver mainly consists of two FIFO buffers and an interrupt service routine). KGDB for Linux, ddb for BSD and WinDbg or KD for Windows can be used to remotely debug systems, for example. This can also provide a serial console through which the in-kernel debugger can be dropped to in case of kernel panics, in which case the local monitor and keyboard may not be usable anymore (the GUI reserves those resources and dropping to the debugger in the case of a panic won't free them).

Another context where these cables can be useful is when administering "headless" devices providing a serial administration console (i.e. managed switches, rackmount server units and various embedded systems).

Types of null modem

Connecting two DTE devices together requires a null modem that acts as a DCE between the devices by swapping the corresponding signals (TD-RD, DTR-DSR, and RTS-CTS). This can be done with a separate device and two cables, or using a cable wired to do this. If devices require Carrier Detect, it can be simulated by connecting DSR and DCD internally in the connector, thus obtaining CD from the remote DTR signal. One feature of the Yost standard is that a null modem cable is a "rollover cable" that just reverses pins 1 through 8 on one end to 8 through 1 on the other end.

No hardware handshaking

The simplest type of serial cable has no hardware handshaking. This cable has only the data and signal ground wires connected. All of the other pins have no connection. With this type of cable flow control has to be implemented in the software. The use of this cable is restricted to data-traffic only on its cross connected Rx and Tx lines. This cable can also be used in devices that do not need or make use of modem control signals.

Loop back handshaking

Because of the compatibility issues and potential problems with a simple null modem cable, a solution was developed to trick the software into thinking there was handshaking available. However, the cable pin out merely loops back and does not physically support the hardware flow control.

This cable could be used with more software but it had no actual enhancements over its predecessor. The software would work thinking it had hardware flow control but could suddenly stop when higher speeds were reached and with no identifiable reason.

Partial handshaking

In this cable the flow control lines are still looped back to the device. However, they are done so in a way that still permits Request To Send (RTS) and Clear To Send (CTS) flow control but has no actual functionality. The only way the flow control signal would reach the other device is if the opposite device checked for a Carrier Detect (CD) signal (at pin 1 on a DE-9 cable and pin 8 on a DB-25 cable). As a result only specially designed software could make use of this partial handshaking. Software flow control still worked with this cable.

Full handshaking

This cable is incompatible with the previous types of cables' hardware flow control, due to a crossing of its RTS/CTS pins. With suitable software, the cable is capable of much higher speeds than its predecessors. It also supports software flow control.

Virtual null modem

A virtual null modem is a communication method to connect two computer applications directly using a virtual serial port. Unlike a null modem cable, a virtual null modem is a software solution which emulates a hardware null modem within the computer. All features of a hardware null modem are available in a virtual null modem as well. There are some advantages to this:

  • Higher transmission speed of serial data (limited by computer performance only).
  • Virtual connection over network or Internet is possible, mitigating cable length restrictions.
  • An unlimited number of virtual connections is possible.
  • No serial cable is needed.
  • The computer's physical serial ports remain free.

For instance, DOSBox has allowed older DOS games to use virtual null modems.

Another common example consists of unix pseudo terminals (pty) which present a standard tty interface to user applications, including virtual serial controls. Two such ptys may easily be linked together by an application to form a virtual null modem communication path.

See also

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Null modem — Modem  Pour le MoDem, voir Mouvement démocrate (France). Le modem (mot valise, pour modulateur démodulateur), est un périphérique servant à communiquer avec des utilisateurs distants par l intermédiaire d une ligne téléphonique. Il permet… …   Wikipédia en Français

  • Null-módem — Este artículo o sección necesita referencias que aparezcan en una publicación acreditada, como revistas especializadas, monografías, prensa diaria o páginas de Internet fidedignas. Puedes añadirlas así o avisar al aut …   Wikipedia Español

  • null modem — ● ►en loc. adj. ►PERIPH Aussi appelé Modem 0 ou Câble Inverseur . Un câble null modem est un câble permettant de connecter entre eux deux ordinateurs sans avoir besoin d un modem ou même d une carte de communication, le tout en liaison série ou… …   Dictionnaire d'informatique francophone

  • null modem — nulinis modemas statusas T sritis informatika apibrėžtis Kabelis, tiesiogiai jungiantis du kompiuterius per jų nuosekliuosius prievadus ir užtikrinantis duomenų mainus tarp kompiuterių taip, lyg jie būtų sujungti ryšio linija per modemus. Kabelis …   Enciklopedinis kompiuterijos žodynas

  • null-modem cable — noun (computing) A special cable used to link two PCs • • • Main Entry: ↑null …   Useful english dictionary

  • Null-Modem-Kabel — Ein typisches Nullmodem Kabel Ein Adapter, der die gleiche Funktion erfüllt Als Nullmodem Leitung wird eine Leitung bezeichnet, welche zwei Computer über die …   Deutsch Wikipedia

  • null modem cable — nulinis modemas statusas T sritis informatika apibrėžtis Kabelis, tiesiogiai jungiantis du kompiuterius per jų nuosekliuosius prievadus ir užtikrinantis duomenų mainus tarp kompiuterių taip, lyg jie būtų sujungti ryšio linija per modemus. Kabelis …   Enciklopedinis kompiuterijos žodynas

  • null modem — A special connection between two computers that will make the computers think they are hooked up to a modem, so that they can communicate to each other …   Dictionary of telecommunications

  • null modem —    A short serial cable that connects two personal computers so that they can communicate without the use of modems.    The cable connects the two computers serial ports, and certain lines in the cable are crossed over so that the wires used for… …   Dictionary of networking

  • null modem —    A dummy device used to interface a peripheral and computer that anticipates using a modem when none is required …   IT glossary of terms, acronyms and abbreviations

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”