Fourier transform

Fourier transform
Fourier transforms
Continuous Fourier transform
Fourier series
Discrete Fourier transform
Discrete-time Fourier transform
Related transforms

The Fourier transform is a mathematical operation that decomposes a function into its constituent frequencies, known as a frequency spectrum. For instance, the transform of a musical chord made up of pure notes is a mathematical representation of the amplitudes (and phase) of the individual notes that make it up. The composite waveform depends on time, and therefore is called the time domain representation. The frequency spectrum is a function of frequency and is called the frequency domain representation. Each value of the function is a complex number (called complex amplitude) that encodes both a magnitude and phase component. The term "Fourier transform" refers to both the transform operation and to the complex-valued function it produces.

In the case of a periodic function, like the musical chord, the Fourier transform can be simplified to the calculation of a discrete set of complex amplitudes, called Fourier series coefficients. Also, when a time-domain function is sampled to facilitate storage and/or computer-processing, it is still possible to recreate a version of the original Fourier transform according to the Poisson summation formula, also known as discrete-time Fourier transform. These topics are addressed in separate articles. For an overview of those and other related operations, refer to Fourier analysis or List of Fourier-related transforms.

Contents

Definition

There are several common conventions for defining the Fourier transform \hat{f} of an integrable function ƒ : RC (Kaiser 1994). This article will use the definition:

\hat{f}(\xi) = \int_{-\infty}^{\infty} f(x)\ e^{- 2\pi i x \xi}\,dx,   for every real number ξ.

When the independent variable x represents time (with SI unit of seconds), the transform variable ξ  represents frequency (in hertz). Under suitable conditions, ƒ can be reconstructed from \hat f by the inverse transform:

f(x) = \int_{-\infty}^{\infty} \hat{f}(\xi)\ e^{2 \pi i x \xi}\,d\xi,   for every real number x.

For other common conventions and notations, including using the angular frequency ω instead of the frequency ξ, see Other conventions and Other notations below. The Fourier transform on Euclidean space is treated separately, in which the variable x often represents position and ξ momentum.

Introduction

The motivation for the Fourier transform comes from the study of Fourier series. In the study of Fourier series, complicated functions are written as the sum of simple waves mathematically represented by sines and cosines. Due to the properties of sine and cosine it is possible to recover the amount of each wave in the sum by an integral. In many cases it is desirable to use Euler's formula, which states that e2πiθ = cos 2πθ + i sin 2πθ, to write Fourier series in terms of the basic waves e2πiθ. This has the advantage of simplifying many of the formulas involved and providing a formulation for Fourier series that more closely resembles the definition followed in this article. This passage from sines and cosines to complex exponentials makes it necessary for the Fourier coefficients to be complex valued. The usual interpretation of this complex number is that it gives both the amplitude (or size) of the wave present in the function and the phase (or the initial angle) of the wave. This passage also introduces the need for negative "frequencies". If θ were measured in seconds then the waves e2πiθ and e−2πiθ would both complete one cycle per second, but they represent different frequencies in the Fourier transform. Hence, frequency no longer measures the number of cycles per unit time, but is closely related.

There is a close connection between the definition of Fourier series and the Fourier transform for functions ƒ which are zero outside of an interval. For such a function we can calculate its Fourier series on any interval that includes the interval where ƒ is not identically zero. The Fourier transform is also defined for such a function. As we increase the length of the interval on which we calculate the Fourier series, then the Fourier series coefficients begin to look like the Fourier transform and the sum of the Fourier series of ƒ begins to look like the inverse Fourier transform. To explain this more precisely, suppose that T is large enough so that the interval [−T/2,T/2] contains the interval on which ƒ is not identically zero. Then the n-th series coefficient cn is given by:

c_n = \int_{-T/2}^{T/2} f(x)\ e^{-2\pi i(n/T) x} dx.\,

Comparing this to the definition of the Fourier transform it follows that c_n=\hat{f}(n/T) since ƒ(x) is zero outside [−T/2,T/2]. Thus the Fourier coefficients are just the values of the Fourier transform sampled on a grid of width 1/T. As T increases the Fourier coefficients more closely represent the Fourier transform of the function.

Under appropriate conditions the sum of the Fourier series of ƒ will equal the function ƒ. In other words ƒ can be written:

f(x)=\frac{1}{T}\sum_{n=-\infty}^\infty \hat{f}(n/T)\ e^{2\pi i(n/T) x} =\sum_{n=-\infty}^\infty \hat{f}(\xi_n)\ e^{2\pi i\xi_n x}\Delta\xi,

where the last sum is simply the first sum rewritten using the definitions ξn = n/T, and Δξ = (n + 1)/T − n/T = 1/T.

This second sum is a Riemann sum, and so by letting T → ∞ it will converge to the integral for the inverse Fourier transform given in the definition section. Under suitable conditions this argument may be made precise (Stein & Shakarchi 2003).

In the study of Fourier series the numbers cn could be thought of as the "amount" of the wave in the Fourier series of ƒ. Similarly, as seen above, the Fourier transform can be thought of as a function that measures how much of each individual frequency is present in our function ƒ, and we can recombine these waves by using an integral (or "continuous sum") to reproduce the original function.

The following images provide a visual illustration of how the Fourier transform measures whether a frequency is present in a particular function. The function depicted f(t)=\cos(6\pi t)e^{-\pi t^2} oscillates at 3 hertz (if t measures seconds) and tends quickly to 0. This function was specially chosen to have a real Fourier transform which can easily be plotted. The first image contains its graph. In order to calculate \hat{f}(3) we must integrate e−2πi(3t)ƒ(t). The second image shows the plot of the real and imaginary parts of this function. The real part of the integrand is almost always positive, this is because when ƒ(t) is negative, then the real part of e−2πi(3t) is negative as well. Because they oscillate at the same rate, when ƒ(t) is positive, so is the real part of e−2πi(3t). The result is that when you integrate the real part of the integrand you get a relatively large number (in this case 0.5). On the other hand, when you try to measure a frequency that is not present, as in the case when we look at \hat{f}(5), the integrand oscillates enough so that the integral is very small. The general situation may be a bit more complicated than this, but this in spirit is how the Fourier transform measures how much of an individual frequency is present in a function ƒ(t).

Properties of the Fourier transform

An integrable function is a function ƒ on the real line that is Lebesgue-measurable and satisfies

\int_{-\infty}^\infty |f(x)| \, dx < \infty.

Basic properties

Given integrable functions f(x), g(x), and h(x), their Fourier transforms are denoted by \hat{f}(\xi), \hat{g}(\xi), and \hat{h}(\xi) respectively. The Fourier transform has the following basic properties (Pinsky 2002).

Linearity
For any complex numbers a and b, if h(x) = (x) + bg(x), then  \hat{h}(\xi)=a\cdot \hat{f}(\xi) + b\cdot\hat{g}(\xi).
Translation
For any real number x0, if h(x) = ƒ(x − x0), then  \hat{h}(\xi)= e^{-2\pi i x_0\xi }\hat{f}(\xi).
Modulation
For any real number ξ0, if h(x) = e2πixξ0ƒ(x), then  \hat{h}(\xi) = \hat{f}(\xi-\xi_{0}).
Scaling
For a non-zero real number a, if h(x) = ƒ(ax), then  \hat{h}(\xi)=\frac{1}{|a|}\hat{f}\left(\frac{\xi}{a}\right).     The case a = −1 leads to the time-reversal property, which states: if h(x) = ƒ(−x), then  \hat{h}(\xi)=\hat{f}(-\xi).
Conjugation
If h(x)=\overline{f(x)}, then  \hat{h}(\xi) = \overline{\hat{f}(-\xi)}.
In particular, if ƒ is real, then one has the reality condition\hat{f}(-\xi)=\overline{\hat{f}(\xi)}.
And if ƒ is purely imaginary, then  \hat{f}(-\xi)=-\overline{\hat{f}(\xi)}.
Duality
If h(x)=\hat{f}(x) then  \hat{h}(\xi)= f(-\xi).
Convolution
If h(x)=\left(f*g\right)(x), then   \hat{h}(\xi)=\hat{f}(\xi)\cdot \hat{g}(\xi).

Uniform continuity and the Riemann–Lebesgue lemma

The rectangular function is Lebesgue integrable.
The sinc function, which is the Fourier transform of the rectangular function, is bounded and continuous, but not Lebesgue integrable.

The Fourier transform may be defined in some cases for non-integrable functions, but the Fourier transforms of integrable functions have several strong properties.

The Fourier transform \hat{f} of any integrable function ƒ is uniformly continuous and \|\hat{f}\|_{\infty}\leq \|f\|_1 (Katznelson 1976). By the Riemann–Lebesgue lemma (Stein & Weiss 1971),

\hat{f}(\xi)\to 0\text{ as }|\xi|\to \infty.

Furthermore, \hat f is bounded and continuous, but need not be integrable. For example, the Fourier transform of the rectangular function, which is integrable, is the sinc function, which is not Lebesgue integrable, because its improper integrals behave analogously to the alternating harmonic series, in converging to a sum without being absolutely convergent.

It is not generally possible to write the inverse transform as a Lebesgue integral. However, when both ƒ and \hat f are integrable, the inverse equality

f(x) = \int_{-\infty}^\infty \hat f(\xi) e^{2 i \pi x \xi} \, d\xi

holds almost everywhere. That is, the Fourier transform is injective on L1(R). (But if ƒ is continuous, then equality holds for every x.)

The Plancherel theorem and Parseval's theorem

Let f(x) and g(x) be integrable, and let \hat{f}(\xi) and \hat{g}(\xi) be their Fourier transforms. If f(x) and g(x) are also square-integrable, then we have Parseval's theorem (Rudin 1987, p. 187):

\int_{-\infty}^{\infty} f(x) \overline{g(x)} \, dx = \int_{-\infty}^\infty \hat{f}(\xi) \overline{\hat{g}(\xi)} \, d\xi,

where the bar denotes complex conjugation.

The Plancherel theorem, which is equivalent to Parseval's theorem, states (Rudin 1987, p. 186):

\int_{-\infty}^\infty \left| f(x) \right|^2\, dx = \int_{-\infty}^\infty \left| \hat{f}(\xi) \right|^2\, d\xi.

The Plancherel theorem makes it possible to define the Fourier transform for functions in L2(R), as described in Generalizations below. The Plancherel theorem has the interpretation in the sciences that the Fourier transform preserves the energy of the original quantity. It should be noted that depending on the author either of these theorems might be referred to as the Plancherel theorem or as Parseval's theorem.

See Pontryagin duality for a general formulation of this concept in the context of locally compact abelian groups.

Poisson summation formula

The Poisson summation formula is an equation that relates the Fourier series coefficients of the periodic summation of a function to values of the function's continuous Fourier transform. It has a variety of useful forms that are derived from the basic one by application of the Fourier transform's scaling and time-shifting properties. One such form leads directly to a proof of the Nyquist-Shannon sampling theorem.

Convolution theorem

The Fourier transform translates between convolution and multiplication of functions. If ƒ(x) and g(x) are integrable functions with Fourier transforms \hat{f}(\xi) and \hat{g}(\xi) respectively, then the Fourier transform of the convolution is given by the product of the Fourier transforms \hat{f}(\xi) and \hat{g}(\xi) (under other conventions for the definition of the Fourier transform a constant factor may appear).

This means that if:

h(x) = (f*g)(x) = \int_{-\infty}^\infty f(y)g(x - y)\,dy,

where ∗ denotes the convolution operation, then:

\hat{h}(\xi) =  \hat{f}(\xi)\cdot \hat{g}(\xi).

In linear time invariant (LTI) system theory, it is common to interpret g(x) as the impulse response of an LTI system with input ƒ(x) and output h(x), since substituting the unit impulse for ƒ(x) yields h(x) = g(x). In this case,  \hat{g}(\xi)  represents the frequency response of the system.

Conversely, if ƒ(x) can be decomposed as the product of two square integrable functions p(x) and q(x), then the Fourier transform of ƒ(x) is given by the convolution of the respective Fourier transforms \hat{p}(\xi) and \hat{q}(\xi).

Cross-correlation theorem

In an analogous manner, it can be shown that if h(x) is the cross-correlation of ƒ(x) and g(x):

h(x)=(f\star g)(x) = \int_{-\infty}^\infty \overline{f(y)}\,g(x+y)\,dy

then the Fourier transform of h(x) is:

\hat{h}(\xi) = \overline{\hat{f}(\xi)}\,\hat{g}(\xi).

As a special case, the autocorrelation of function ƒ(x) is:

h(x)=(f\star f)(x)=\int_{-\infty}^\infty \overline{f(y)}f(x+y)\,dy

for which

\hat{h}(\xi) = \overline{\hat{f}(\xi)}\,\hat{f}(\xi) = |\hat{f}(\xi)|^2.

Eigenfunctions

One important choice of an orthonormal basis for L2(R) is given by the Hermite functions

{\psi}_n(x) = \frac{2^{1/4}}{\sqrt{n!}} \, e^{-\pi x^2}He_n(2x\sqrt{\pi}),

where Hen(x) are the "probabilist's" Hermite polynomials, defined by Hen(x) = (−1)nexp(x2/2) Dn exp(−x2/2). Under this convention for the Fourier transform, we have that

 \hat\psi_n(\xi) = (-i)^n {\psi}_n(\xi) .

In other words, the Hermite functions form a complete orthonormal system of eigenfunctions for the Fourier transform on L2(R) (Pinsky 2002). However, this choice of eigenfunctions is not unique. There are only four different eigenvalues of the Fourier transform (±1 and ±i) and any linear combination of eigenfunctions with the same eigenvalue gives another eigenfunction. As a consequence of this, it is possible to decompose L2(R) as a direct sum of four spaces H0, H1, H2, and H3 where the Fourier transform acts on Hek simply by multiplication by ik. This approach to define the Fourier transform is due to N. Wiener (Duoandikoetxea 2001). The choice of Hermite functions is convenient because they are exponentially localized[jargon] in both frequency and time domains, and thus give rise[further explanation needed] to the fractional Fourier transform used in time-frequency analysis (Boashash 2003).

Fourier transform on Euclidean space

The Fourier transform can be in any arbitrary number of dimensions n. As with the one-dimensional case there are many conventions, for an integrable function ƒ(x) this article takes the definition:

\hat{f}(\xi) = \mathcal{F}(f)(\xi) = \int_{\R^n} f(x) e^{-2\pi i x\cdot\xi} \, dx

where x and ξ are n-dimensional vectors, and x·ξ is the dot product of the vectors. The dot product is sometimes written as \left\langle x,\xi \right\rangle.

All of the basic properties listed above hold for the n-dimensional Fourier transform, as do Plancherel's and Parseval's theorem. When the function is integrable, the Fourier transform is still uniformly continuous and the Riemann–Lebesgue lemma holds. (Stein & Weiss 1971)

Uncertainty principle

Generally speaking, the more concentrated f(x) is, the more spread out its Fourier transform \hat{f}(\xi)  must be. In particular, the scaling property of the Fourier transform may be seen as saying: if we "squeeze" a function in x, its Fourier transform "stretches out" in ξ. It is not possible to arbitrarily concentrate both a function and its Fourier transform.

The trade-off between the compaction of a function and its Fourier transform can be formalized in the form of an uncertainty principle by viewing a function and its Fourier transform as conjugate variables with respect to the symplectic form on the time–frequency domain: from the point of view of the linear canonical transformation, the Fourier transform is rotation by 90° in the time–frequency domain, and preserves the symplectic form.

Suppose ƒ(x) is an integrable and square-integrable function. Without loss of generality, assume that ƒ(x) is normalized:

\int_{-\infty}^\infty |f(x)|^2 \,dx=1.

It follows from the Plancherel theorem that \hat{f}(\xi)  is also normalized.

The spread around x = 0 may be measured by the dispersion about zero (Pinsky 2002) defined by

D_0(f)=\int_{-\infty}^\infty x^2|f(x)|^2\,dx.

In probability terms, this is the second moment of |f(x)|^2\,\! about zero.

The Uncertainty principle states that, if ƒ(x) is absolutely continuous and the functions x·ƒ(x) and ƒ′(x) are square integrable, then

D_0(f)D_0(\hat{f}) \geq \frac{1}{16\pi^2}    (Pinsky 2002).

The equality is attained only in the case f(x)=C_1 \, e^{{- \pi x^2}/{\sigma^2}}    (hence   \quad \hat{f}(\xi)= \sigma C_1 \, e^{-\pi\sigma^2\xi^2}  )  where σ > 0 is arbitrary and C1 is such that ƒ is L2–normalized (Pinsky 2002). In other words, where ƒ is a (normalized) Gaussian function with variance σ2, centered at zero, and its Fourier transform is a Gaussian function with variance 1/σ2.

In fact, this inequality implies that:

\left(\int_{-\infty}^\infty (x-x_0)^2|f(x)|^2\,dx\right)\left(\int_{-\infty}^\infty(\xi-\xi_0)^2|\hat{f}(\xi)|^2\,d\xi\right)\geq \frac{1}{16\pi^2}

for any x_0, \, \xi_0  in R  (Stein & Shakarchi 2003).

In quantum mechanics, the momentum and position wave functions are Fourier transform pairs, to within a factor of Planck's constant. With this constant properly taken into account, the inequality above becomes the statement of the Heisenberg uncertainty principle (Stein & Shakarchi 2003).

A stronger uncertainty principle is the Hirschman uncertainty principle which is expressed as:

H(|f|^2)+H(|\hat{f}|^2)\ge \log(e/2)

where H(p) is the differential entropy of the probability density function p(x):

H(p) = -\int_{-\infty}^\infty p(x)\log(p(x))dx

where the logarithms may be in any base which is consistent. The equality is attained for a Gaussian, as in the previous case.

Spherical harmonics

Let the set of homogeneous harmonic polynomials of degree k on Rn be denoted by Ak. The set Ak consists of the solid spherical harmonics of degree k. The solid spherical harmonics play a similar role in higher dimensions to the Hermite polynomials in dimension one. Specifically, if f(x) = eπ|x|2P(x) for some P(x) in Ak, then \hat{f}(\xi)=i^{-k}f(\xi). Let the set Hk be the closure in L2(Rn) of linear combinations of functions of the form f(|x|)P(x) where P(x) is in Ak. The space L2(Rn) is then a direct sum of the spaces Hk and the Fourier transform maps each space Hk to itself and is possible to characterize the action of the Fourier transform on each space Hk (Stein & Weiss 1971). Let ƒ(x) = ƒ0(|x|)P(x) (with P(x) in Ak), then \hat{f}(\xi)=F_0(|\xi|)P(\xi) where

F_0(r)=2\pi i^{-k}r^{-(n+2k-2)/2}\int_0^\infty f_0(s)J_{(n+2k-2)/2}(2\pi rs)s^{(n+2k)/2}\,ds.

Here J(n + 2k − 2)/2 denotes the Bessel function of the first kind with order (n + 2k − 2)/2. When k = 0 this gives a useful formula for the Fourier transform of a radial function (Grafakos 2004).

Restriction problems

In higher dimensions it becomes interesting to study restriction problems for the Fourier transform. The Fourier transform of an integrable function is continuous and the restriction of this function to any set is defined. But for a square-integrable function the Fourier transform could be a general class of square integrable functions. As such, the restriction of the Fourier transform of an L2(Rn) function cannot be defined on sets of measure 0. It is still an active area of study to understand restriction problems in Lp for 1 < p < 2. Surprisingly, it is possible in some cases to define the restriction of a Fourier transform to a set S, provided S has non-zero curvature. The case when S is the unit sphere in Rn is of particular interest. In this case the Tomas-Stein restriction theorem states that the restriction of the Fourier transform to the unit sphere in Rn is a bounded operator on Lp provided 1 ≤ p ≤ (2n + 2) / (n + 3).

One notable difference between the Fourier transform in 1 dimension versus higher dimensions concerns the partial sum operator. Consider an increasing collection of measurable sets ER indexed by R ∈ (0,∞): such as balls of radius R centered at the origin, or cubes of side 2R. For a given integrable function ƒ, consider the function ƒR defined by:

f_R(x) = \int_{E_R}\hat{f}(\xi) e^{2\pi ix\cdot\xi}\, d\xi, \quad x \in \mathbb{R}^n.

Suppose in addition that ƒ is in Lp(Rn). For n = 1 and 1 < p < ∞, if one takes ER = (−R, R), then ƒR converges to ƒ in Lp as R tends to infinity, by the boundedness of the Hilbert transform. Naively one may hope the same holds true for n > 1. In the case that ER is taken to be a cube with side length R, then convergence still holds. Another natural candidate is the Euclidean ball ER = {ξ : |ξ| < R}. In order for this partial sum operator to converge, it is necessary that the multiplier for the unit ball be bounded in Lp(Rn). For n ≥ 2 it is a celebrated theorem of Charles Fefferman that the multiplier for the unit ball is never bounded unless p = 2 (Duoandikoetxea 2001). In fact, when p ≠ 2, this shows that not only may ƒR fail to converge to ƒ in Lp, but for some functions ƒ ∈ Lp(Rn), ƒR is not even an element of Lp.

Generalizations

Fourier transform on other function spaces

It is possible to extend the definition of the Fourier transform to other spaces of functions. Since compactly supported smooth functions are integrable and dense in L2(R), the Plancherel theorem allows us to extend the definition of the Fourier transform to general functions in L2(R) by continuity arguments. Further  \mathcal{F}: L2(R) → L2(R) is a unitary operator (Stein & Weiss 1971, Thm. 2.3). Many of the properties remain the same for the Fourier transform. The Hausdorff–Young inequality can be used to extend the definition of the Fourier transform to include functions in Lp(R) for 1 ≤ p ≤ 2. Unfortunately, further extensions become more technical. The Fourier transform of functions in Lp for the range 2 < p < ∞ requires the study of distributions (Katznelson 1976). In fact, it can be shown that there are functions in Lp with p>2 so that the Fourier transform is not defined as a function (Stein & Weiss 1971).

Fourier–Stieltjes transform

The Fourier transform of a finite Borel measure μ on Rn is given by (Pinsky 2002):

\hat\mu(\xi)=\int_{\mathbb{R}^n} \mathrm{e}^{-2\pi i x \cdot \xi}\,d\mu.

This transform continues to enjoy many of the properties of the Fourier transform of integrable functions. One notable difference is that the Riemann–Lebesgue lemma fails for measures (Katznelson 1976). In the case that  = ƒ(xdx, then the formula above reduces to the usual definition for the Fourier transform of ƒ. In the case that μ is the probability distribution associated to a random variable X, the Fourier-Stieltjes transform is closely related to the characteristic function, but the typical conventions in probability theory take eix·ξ instead of e−2πix·ξ (Pinsky 2002). In the case when the distribution has a probability density function this definition reduces to the Fourier transform applied to the probability density function, again with a different choice of constants.

The Fourier transform may be used to give a characterization of continuous measures. Bochner's theorem characterizes which functions may arise as the Fourier–Stieltjes transform of a measure (Katznelson 1976).

Furthermore, the Dirac delta function is not a function but it is a finite Borel measure. Its Fourier transform is a constant function (whose specific value depends upon the form of the Fourier transform used).

Tempered distributions

The Fourier transform maps the space of Schwartz functions to itself, and gives a homeomorphism of the space to itself (Stein & Weiss 1971). Because of this it is possible to define the Fourier transform of tempered distributions. These include all the integrable functions mentioned above, as well as well-behaved functions of polynomial growth and distributions of compact support, and have the added advantage that the Fourier transform of any tempered distribution is again a tempered distribution.

The following two facts provide some motivation for the definition of the Fourier transform of a distribution. First let ƒ and g be integrable functions, and let \hat{f} and \hat{g} be their Fourier transforms respectively. Then the Fourier transform obeys the following multiplication formula (Stein & Weiss 1971),

\int_{\mathbb{R}^n}\hat{f}(x)g(x)\,dx=\int_{\mathbb{R}^n}f(x)\hat{g}(x)\,dx.

Secondly, every integrable function ƒ defines a distribution Tƒ by the relation

T_f(\varphi)=\int_{\mathbb{R}^n}f(x)\varphi(x)\,dx   for all Schwartz functions φ.

In fact, given a distribution T, we define the Fourier transform by the relation

\hat{T}(\varphi)=T(\hat{\varphi})   for all Schwartz functions φ.

It follows that

\hat{T}_f=T_{\hat{f}}.\

Distributions can be differentiated and the above mentioned compatibility of the Fourier transform with differentiation and convolution remains true for tempered distributions.

Locally compact abelian groups

The Fourier transform may be generalized to any locally compact abelian group. A locally compact abelian group is an abelian group which is at the same time a locally compact Hausdorff topological space so that the group operations are continuous. If G is a locally compact abelian group, it has a translation invariant measure μ, called Haar measure. For a locally compact abelian group G it is possible to place a topology on the set of characters \hat G so that \hat G is also a locally compact abelian group. For a function ƒ in L1(G) it is possible to define the Fourier transform by (Katznelson 1976):

\hat{f}(\xi)=\int_G \xi(x)f(x)\,d\mu\qquad\text{for any }\xi\in\hat G.

Locally compact Hausdorff space

The Fourier transform may be generalized to any locally compact Hausdorff space, which recovers the topology but loses the group structure.

Given a locally compact Hausdorff topological space X, the space A=C0(X) of continuous complex-valued functions on X which vanish at infinity is in a natural way a commutative C*-algebra, via pointwise addition, multiplication, complex conjugation, and with norm as the uniform norm. Conversely, the characters of this algebra A, denoted ΦA, are naturally a topological space, and can be identified with evaluation at a point of x, and one has an isometric isomorphism C_0(X) \to C_0(\Phi_A). In the case where X=R is the real line, this is exactly the Fourier transform.

Non-abelian groups

The Fourier transform can also be defined for functions on a non-abelian group, provided that the group is compact. Unlike the Fourier transform on an abelian group, which is scalar-valued, the Fourier transform on a non-abelian group is operator-valued (Hewitt & Ross 1971, Chapter 8). The Fourier transform on compact groups is a major tool in representation theory (Knapp 2001) and non-commutative harmonic analysis.

Let G be a compact Hausdorff topological group. Let Σ denote the collection of all isomorphism classes of finite-dimensional irreducible unitary representations, along with a definite choice of representation U(σ) on the Hilbert space Hσ of finite dimension dσ for each σ ∈ Σ. If μ is a finite Borel measure on G, then the Fourier–Stieltjes transform of μ is the operator on Hσ defined by

\langle \hat{\mu}\xi,\eta\rangle_{H_\sigma} = \int_G \langle \overline{U}^{(\sigma)}_g\xi,\eta\rangle\,d\mu(g)

where \scriptstyle{\overline{U}^{(\sigma)}} is the complex-conjugate representation of U(σ) acting on Hσ. As in the abelian case, if μ is absolutely continuous with respect to the left-invariant probability measure λ on G, then it is represented as

dμ = fdλ

for some ƒ ∈ L1(λ). In this case, one identifies the Fourier transform of ƒ with the Fourier–Stieltjes transform of μ.

The mapping \mu\mapsto\hat{\mu} defines an isomorphism between the Banach space M(G) of finite Borel measures (see rca space) and a closed subspace of the Banach space C(Σ) consisting of all sequences E = (Eσ) indexed by Σ of (bounded) linear operators Eσ : Hσ → Hσ for which the norm

\|E\| = \sup_{\sigma\in\Sigma}\|E_\sigma\|

is finite. The "convolution theorem" asserts that, furthermore, this isomorphism of Banach spaces is in fact an isomorphism of C* algebras into a subspace of C(Σ), in which M(G) is equipped with the product given by convolution of measures and C(Σ) the product given by multiplication of operators in each index σ.

The Peter-Weyl theorem holds, and a version of the Fourier inversion formula (Plancherel's theorem) follows: if ƒ ∈ L2(G), then

f(g) = \sum_{\sigma\in\Sigma} d_\sigma \operatorname{tr}(\hat{f}(\sigma)U^{(\sigma)}_g)

where the summation is understood as convergent in the L2 sense.

The generalization of the Fourier transform to the noncommutative situation has also in part contributed to the development of noncommutative geometry.[citation needed] In this context, a categorical generalization of the Fourier transform to noncommutative groups is Tannaka-Krein duality, which replaces the group of characters with the category of representations. However, this loses the connection with harmonic functions.

Alternatives

In signal processing terms, a function (of time) is a representation of a signal with perfect time resolution, but no frequency information, while the Fourier transform has perfect frequency resolution, but no time information: the magnitude of the Fourier transform at a point is how much frequency content there is, but location is only given by phase (argument of the Fourier transform at a point), and standing waves are not localized in time – a sine wave continues out to infinity, without decaying. This limits the usefulness of the Fourier transform for analyzing signals that are localized in time, notably transients, or any signal of finite extent.

As alternatives to the Fourier transform, in time-frequency analysis, one uses time-frequency transforms or time-frequency distributions to represent signals in a form that has some time information and some frequency information – by the uncertainty principle, there is a trade-off between these. These can be generalizations of the Fourier transform, such as the short-time Fourier transform or fractional Fourier transform, or can use different functions to represent signals, as in wavelet transforms and chirplet transforms, with the wavelet analog of the (continuous) Fourier transform being the continuous wavelet transform. (Boashash 2003).

Applications

Analysis of differential equations

Fourier transforms and the closely related Laplace transforms are widely used in solving differential equations. The Fourier transform is compatible with differentiation in the following sense: if f(x) is a differentiable function with Fourier transform \hat{f}(\xi), then the Fourier transform of its derivative is given by 2\pi i\xi\hat{f}(\xi). This can be used to transform differential equations into algebraic equations. Note that this technique only applies to problems whose domain is the whole set of real numbers. By extending the Fourier transform to functions of several variables partial differential equations with domain Rn can also be translated into algebraic equations.

Fourier transform spectroscopy

The Fourier transform is also used in nuclear magnetic resonance (NMR) and in other kinds of spectroscopy, e.g. infrared (FTIR). In NMR an exponentially-shaped free induction decay (FID) signal is acquired in the time domain and Fourier-transformed to a Lorentzian line-shape in the frequency domain. The Fourier transform is also used in magnetic resonance imaging (MRI) and mass spectrometry.

Domain and range of the Fourier transform

It is often desirable to have the most general domain for the Fourier transform possible. The definition of Fourier transform as an integral naturally restricts the domain to the space of integrable functions. Unfortunately, there is no simple characterization of which functions are Fourier transforms of integrable functions (Stein & Weiss 1971). It is possible to extend the domain of the Fourier transform in various ways, as discussed in the generalizations above. The following list details some of the more common domains and ranges on which the Fourier transform is defined.

  • The space of Schwartz functions is closed under the Fourier transform. Schwartz functions are rapidly decaying functions and do not include all functions which are relevant for the Fourier transform. More details may be found in (Stein & Weiss 1971).
  • The space Lp maps into the space Lq, where 1/p + 1/q = 1 and 1 ≤ p ≤ 2 (Hausdorff–Young inequality).
  • In particular, the space L2 is closed under the Fourier transform, but here the Fourier transform is no longer defined by integration.
  • The space L1 of Lebesgue integrable functions maps into C0, the space of continuous functions that tend to zero at infinity – not just into the space L^\infty of bounded functions (the Riemann–Lebesgue lemma).
  • The set of tempered distributions is closed under the Fourier transform. Tempered distributions are also a form of generalization of functions. It is in this generality that one can define the Fourier transform of objects like the Dirac comb.

Other notations

Other common notations for  \hat{f}(\xi) are these:

\tilde{f}(\xi),\  \tilde{f}(\omega),\  F(\xi),\  \mathcal{F}\left(f\right)(\xi),\  \left(\mathcal{F}f\right)(\xi),\  \mathcal{F}(f),\  \mathcal F(\omega),\ F(\omega),\  \mathcal F(j\omega),\  \mathcal{F}\{f\},\  \mathcal{F} \left(f(t)\right).

Though less commonly other notations are used. Denoting the Fourier transform by a capital letter corresponding to the letter of function being transformed (such as f(x) and F(ξ)) is especially common in the sciences and engineering. In electronics, the omega (ω) is often used instead of ξ due to its interpretation as angular frequency, sometimes it is written as F(), where j is the imaginary unit, to indicate its relationship with the Laplace transform, and sometimes it is written informally as F(2πf) in order to use ordinary frequency.

The interpretation of the complex function \hat{f}(\xi) may be aided by expressing it in polar coordinate form

\hat{f}(\xi)=A(\xi)e^{i\varphi(\xi)}

in terms of the two real functions A(ξ) and φ(ξ) where:

A(\xi) = |\hat{f}(\xi)|, \,

is the amplitude and

\varphi (\xi) = \arg \big( \hat{f}(\xi) \big),  

is the phase (see arg function).

Then the inverse transform can be written:

f(x) = \int  _{-\infty}^{\infty} A(\xi)\ e^{ i(2\pi \xi x +\varphi (\xi))}\,d\xi,

which is a recombination of all the frequency components of ƒ(x). Each component is a complex sinusoid of the form e2πixξ  whose amplitude is A(ξ) and whose initial phase angle (at x = 0) is φ(ξ).

The Fourier transform may be thought of as a mapping on function spaces. This mapping is here denoted \mathcal{F} and \mathcal{F}(f) is used to denote the Fourier transform of the function f. This mapping is linear, which means that \mathcal{F} can also be seen as a linear transformation on the function space and implies that the standard notation in linear algebra of applying a linear transformation to a vector (here the function f) can be used to write \mathcal{F} f instead of \mathcal{F}(f). Since the result of applying the Fourier transform is again a function, we can be interested in the value of this function evaluated at the value ξ for its variable, and this is denoted either as \mathcal{F}(f)(\xi) or as (\mathcal{F} f)(\xi). Notice that in the former case, it is implicitly understood that \mathcal{F} is applied first to f and then the resulting function is evaluated at ξ, not the other way around.

In mathematics and various applied sciences it is often necessary to distinguish between a function f and the value of f when its variable equals x, denoted f(x). This means that a notation like \mathcal{F}(f(x)) formally can be interpreted as the Fourier transform of the values of f at x. Despite this flaw, the previous notation appears frequently, often when a particular function or a function of a particular variable is to be transformed.

For example, \mathcal{F}( \mathrm{rect}(x) ) = \mathrm{sinc}(\xi) is sometimes used to express that the Fourier transform of a rectangular function is a sinc function,

or \mathcal{F}(f(x+x_{0})) = \mathcal{F}(f(x)) e^{2\pi i \xi x_{0}} is used to express the shift property of the Fourier transform.

Notice, that the last example is only correct under the assumption that the transformed function is a function of x, not of x0.

Other conventions

The Fourier transform can also be written in terms of angular frequency:   ω = 2πξ whose units are radians per second.

The substitution ξ = ω/(2π) into the formulas above produces this convention:

\hat{f}(\omega) = \int_{\mathbb{R}^n} f(x) e^{- i\omega\cdot x}\,dx.

Under this convention, the inverse transform becomes:

f(x) = \frac{1}{(2\pi)^n} \int_{\mathbb{R}^n} \hat{f}(\omega)e^{ i\omega \cdot x}\,d\omega.

Unlike the convention followed in this article, when the Fourier transform is defined this way, it is no longer a unitary transformation on L2(Rn). There is also less symmetry between the formulas for the Fourier transform and its inverse.

Another convention is to split the factor of (2π)n evenly between the Fourier transform and its inverse, which leads to definitions:

 \hat{f}(\omega) = \frac{1}{(2\pi)^{n/2}} \int_{\mathbb{R}^n} f(x) e^{- i\omega\cdot x}\,dx
f(x) = \frac{1}{(2\pi)^{n/2}} \int_{\mathbb{R}^n} \hat{f}(\omega) e^{ i\omega \cdot x}\,d\omega.

Under this convention, the Fourier transform is again a unitary transformation on L2(Rn). It also restores the symmetry between the Fourier transform and its inverse.

Variations of all three conventions can be created by conjugating the complex-exponential kernel of both the forward and the reverse transform. The signs must be opposites. Other than that, the choice is (again) a matter of convention.

Summary of popular forms of the Fourier transform
ordinary frequency ξ (hertz) unitary \displaystyle \hat{f}_1(\xi)\ \stackrel{\mathrm{def}}{=}\ \int_{\mathbb{R}^n} f(x) e^{-2 \pi i x\cdot\xi}\, dx = \hat{f}_2(2 \pi \xi)=(2 \pi)^{n/2}\hat{f}_3(2 \pi \xi)

\displaystyle f(x) = \int_{\mathbb{R}^n} \hat{f}_1(\xi) e^{2 \pi i  x\cdot \xi}\, d\xi \

angular frequency ω (rad/s) non-unitary \displaystyle \hat{f}_2(\omega) \ \stackrel{\mathrm{def}}{=}\int_{\mathbb{R}^n} f(x) e^{-i\omega\cdot x} \, dx \ = \hat{f}_1 \left ( \frac{\omega}{2 \pi} \right ) = (2 \pi)^{n/2}\ \hat{f}_3(\omega)

\displaystyle f(x) = \frac{1}{(2 \pi)^n} \int_{\mathbb{R}^n} \hat{f}_2(\omega) e^{i \omega\cdot x} \, d \omega \

unitary \displaystyle \hat{f}_3(\omega) \ \stackrel{\mathrm{def}}{=}\  \frac{1}{(2 \pi)^{n/2}} \int_{\mathbb{R}^n} f(x) \ e^{-i \omega\cdot x}\, dx = \frac{1}{(2 \pi)^{n/2}} \hat{f}_1\left(\frac{\omega}{2 \pi} \right) = \frac{1}{(2 \pi)^{n/2}} \hat{f}_2(\omega)

\displaystyle f(x) = \frac{1}{(2 \pi)^{n/2}} \int_{\mathbb{R}^n} \hat{f}_3(\omega)e^{i \omega\cdot x}\, d \omega \

The ordinary-frequency convention (which is used in this article) is the one most often found in the mathematics literature.[citation needed] In the physics literature, the two angular-frequency conventions are more commonly used.[citation needed]

As discussed above, the characteristic function of a random variable is the same as the Fourier–Stieltjes transform of its distribution measure, but in this context it is typical to take a different convention for the constants. Typically characteristic function is defined E(e^{it\cdot X})=\int e^{it\cdot x}d\mu_X(x).

As in the case of the "non-unitary angular frequency" convention above, there is no factor of 2π appearing in either of the integral, or in the exponential. Unlike any of the conventions appearing above, this convention takes the opposite sign in the exponential.

Tables of important Fourier transforms

The following tables record some closed form Fourier transforms. For functions ƒ(x) , g(x) and h(x) denote their Fourier transforms by \hat{f}, \hat{g}, and \hat{h} respectively. Only the three most common conventions are included. It may be useful to notice that entry 105 gives a relationship between the Fourier transform of a function and the original function, which can be seen as relating the Fourier transform and its inverse.

Functional relationships

The Fourier transforms in this table may be found in (Erdélyi 1954) or the appendix of (Kammler 2000).

Function Fourier transform
unitary, ordinary frequency
Fourier transform
unitary, angular frequency
Fourier transform
non-unitary, angular frequency
Remarks
\displaystyle f(x)\, \displaystyle \hat{f}(\xi)=

\displaystyle \int_{-\infty}^{\infty}f(x) e^{-2\pi i x\xi}\, dx

\displaystyle \hat{f}(\omega)=

\displaystyle \frac{1}{\sqrt{2 \pi}} \int_{-\infty}^{\infty} f(x) e^{-i \omega x}\, dx

\displaystyle \hat{f}(\nu)=

\displaystyle \int_{-\infty}^{\infty}f(x) e^{-i \nu x}\, dx

Definition
101 \displaystyle a\cdot f(x) + b\cdot g(x)\, \displaystyle a\cdot \hat{f}(\xi) + b\cdot \hat{g}(\xi)\, \displaystyle a\cdot \hat{f}(\omega) + b\cdot \hat{g}(\omega)\, \displaystyle a\cdot \hat{f}(\nu) + b\cdot \hat{g}(\nu)\, Linearity
102 \displaystyle f(x - a)\, \displaystyle e^{-2\pi i a \xi} \hat{f}(\xi)\, \displaystyle e^{- i a \omega} \hat{f}(\omega)\, \displaystyle e^{- i a \nu} \hat{f}(\nu)\, Shift in time domain
103 \displaystyle e^{ 2\pi iax} f(x)\, \displaystyle \hat{f} \left(\xi - a\right)\, \displaystyle \hat{f}(\omega - 2\pi a)\, \displaystyle \hat{f}(\nu - 2\pi a)\, Shift in frequency domain, dual of 102
104 \displaystyle f(a x)\, \displaystyle \frac{1}{|a|} \hat{f}\left( \frac{\xi}{a} \right)\, \displaystyle \frac{1}{|a|} \hat{f}\left( \frac{\omega}{a} \right)\, \displaystyle \frac{1}{|a|} \hat{f}\left( \frac{\nu}{a} \right)\, Scaling in the time domain. If \displaystyle |a|\, is large, then \displaystyle f(a x)\, is concentrated around 0 and \displaystyle \frac{1}{|a|}\hat{f} \left( \frac{\omega}{a} \right)\, spreads out and flattens.
105 \displaystyle \hat{f}(x)\, \displaystyle f(-\xi)\, \displaystyle f(-\omega)\, \displaystyle 2\pi f(-\nu)\, Duality. Here \hat{f} needs to be calculated using the same method as Fourier transform column. Results from swapping "dummy" variables of \displaystyle x \, and \displaystyle \xi \, or \displaystyle \omega \, or \displaystyle \nu \,.
106 \displaystyle \frac{d^n f(x)}{dx^n}\, \displaystyle  (2\pi i\xi)^n  \hat{f}(\xi)\, \displaystyle (i\omega)^n  \hat{f}(\omega)\, \displaystyle (i\nu)^n  \hat{f}(\nu)\,
107 \displaystyle x^n f(x)\, \displaystyle \left (\frac{i}{2\pi}\right)^n \frac{d^n \hat{f}(\xi)}{d\xi^n}\, \displaystyle i^n \frac{d^n \hat{f}(\omega)}{d\omega^n} \displaystyle i^n \frac{d^n \hat{f}(\nu)}{d\nu^n} This is the dual of 106
108 \displaystyle (f * g)(x)\, \displaystyle \hat{f}(\xi) \hat{g}(\xi)\, \displaystyle \sqrt{2\pi} \hat{f}(\omega) \hat{g}(\omega)\, \displaystyle \hat{f}(\nu) \hat{g}(\nu)\, The notation \displaystyle f * g\, denotes the convolution of \displaystyle f\, and \displaystyle g\, — this rule is the convolution theorem
109 \displaystyle f(x) g(x)\, \displaystyle (\hat{f} * \hat{g})(\xi)\, \displaystyle (\hat{f} * \hat{g})(\omega) \over \sqrt{2\pi}\, \displaystyle \frac{1}{2\pi}(\hat{f} * \hat{g})(\nu)\, This is the dual of 108
110 For \displaystyle f(x) \, a purely real \displaystyle \hat{f}(-\xi) = \overline{\hat{f}(\xi)}\, \displaystyle \hat{f}(-\omega) = \overline{\hat{f}(\omega)}\, \displaystyle \hat{f}(-\nu) = \overline{\hat{f}(\nu)}\, Hermitian symmetry. \displaystyle \overline{z}\, indicates the complex conjugate.
111 For \displaystyle f(x) \, a purely real even function \displaystyle \hat{f}(\omega), \displaystyle \hat{f}(\xi) and \displaystyle \hat{f}(\nu)\, are purely real even functions.
112 For \displaystyle f(x) \, a purely real odd function \displaystyle \hat{f}(\omega), \displaystyle \hat{f}(\xi) and \displaystyle \hat{f}(\nu) are purely imaginary odd functions.

Square-integrable functions

The Fourier transforms in this table may be found in (Campbell & Foster 1948), (Erdélyi 1954), or the appendix of (Kammler 2000).

Function Fourier transform
unitary, ordinary frequency
Fourier transform
unitary, angular frequency
Fourier transform
non-unitary, angular frequency
Remarks
\displaystyle f(x) \displaystyle \hat{f}(\xi)=

\displaystyle \int_{-\infty}^{\infty}f(x) e^{-2\pi ix\xi}\,dx

\displaystyle \hat{f}(\omega)=

\displaystyle \frac{1}{\sqrt{2 \pi}} \int_{-\infty}^{\infty} f(x) e^{-i \omega x}\, dx

\displaystyle \hat{f}(\nu)=

\displaystyle \int_{-\infty}^{\infty} f(x) e^{-i\nu x}\, dx

201 \displaystyle \operatorname{rect}(a x) \, \displaystyle \frac{1}{|a|}\cdot \operatorname{sinc}\left(\frac{\xi}{a}\right) \displaystyle \frac{1}{\sqrt{2 \pi a^2}}\cdot \operatorname{sinc}\left(\frac{\omega}{2\pi a}\right) \displaystyle \frac{1}{|a|}\cdot \operatorname{sinc}\left(\frac{\nu}{2\pi a}\right) The rectangular pulse and the normalized sinc function, here defined as sinc(x) = sin(πx)/(πx)
202 \displaystyle \operatorname{sinc}(a x)\, \displaystyle \frac{1}{|a|}\cdot \operatorname{rect}\left(\frac{\xi}{a} \right)\, \displaystyle \frac{1}{\sqrt{2\pi a^2}}\cdot \operatorname{rect}\left(\frac{\omega}{2 \pi a}\right) \displaystyle \frac{1}{|a|}\cdot \operatorname{rect}\left(\frac{\nu}{2 \pi a}\right) Dual of rule 201. The rectangular function is an ideal low-pass filter, and the sinc function is the non-causal impulse response of such a filter.
203 \displaystyle \operatorname{sinc}^2 (a x) \displaystyle \frac{1}{|a|}\cdot \operatorname{tri} \left( \frac{\xi}{a} \right) \displaystyle \frac{1}{\sqrt{2\pi a^2}}\cdot \operatorname{tri} \left( \frac{\omega}{2\pi a} \right) \displaystyle \frac{1}{|a|}\cdot \operatorname{tri} \left( \frac{\nu}{2\pi a} \right) The function tri(x) is the triangular function
204 \displaystyle \operatorname{tri} (a x) \displaystyle \frac{1}{|a|}\cdot \operatorname{sinc}^2 \left( \frac{\xi}{a} \right) \, \displaystyle \frac{1}{\sqrt{2\pi a^2}} \cdot \operatorname{sinc}^2 \left( \frac{\omega}{2\pi a} \right) \displaystyle \frac{1}{|a|} \cdot \operatorname{sinc}^2 \left( \frac{\nu}{2\pi a} \right) Dual of rule 203.
205 \displaystyle e^{- a x} u(x) \, \displaystyle \frac{1}{a + 2 \pi i \xi} \displaystyle \frac{1}{\sqrt{2 \pi} (a + i \omega)} \displaystyle \frac{1}{a + i \nu} The function u(x) is the Heaviside unit step function and a>0.
206 \displaystyle e^{-\alpha x^2}\, \displaystyle \sqrt{\frac{\pi}{\alpha}}\cdot e^{-\frac{(\pi \xi)^2}{\alpha}} \displaystyle \frac{1}{\sqrt{2 \alpha}}\cdot e^{-\frac{\omega^2}{4 \alpha}} \displaystyle \sqrt{\frac{\pi}{\alpha}}\cdot e^{-\frac{\nu^2}{4 \alpha}} This shows that, for the unitary Fourier transforms, the Gaussian function exp(−αx2) is its own Fourier transform for some choice of α. For this to be integrable we must have Re(α)>0.
207 \displaystyle \operatorname{e}^{-a|x|} \, \displaystyle \frac{2 a}{a^2 + 4 \pi^2 \xi^2} \displaystyle \sqrt{\frac{2}{\pi}} \cdot \frac{a}{a^2 + \omega^2} \displaystyle \frac{2a}{a^2 + \nu^2} For a>0. That is, the Fourier transform of a decaying exponential function is a Lorentzian function.
208 \displaystyle \operatorname{sech}(a x) \, \displaystyle \frac{\pi}{a} \operatorname{sech} \left( \frac{\pi^2}{ a} \xi \right) \displaystyle \frac{1}{a}\sqrt{\frac{\pi}{2}}\operatorname{sech}\left( \frac{\pi}{2 a} \omega \right) \displaystyle \frac{\pi}{a}\operatorname{sech}\left( \frac{\pi}{2 a} \nu \right) Hyperbolic secant is its own Fourier transform
209 \displaystyle e^{-\frac{a^2 x^2}2} H_n(a x)\, \displaystyle \frac{\sqrt{2\pi}(-i)^n}{a}

  \cdot e^{-\frac{2\pi^2\xi^2}{a^2}} H_n\left(\frac{2\pi\xi}a\right)

\displaystyle \frac{(-i)^n}{a}

  \cdot e^{-\frac{\omega^2}{2 a^2}} H_n\left(\frac \omega a\right)

\displaystyle \frac{(-i)^n \sqrt{2\pi}}{a}

  \cdot e^{-\frac{\nu^2}{2 a^2}} H_n\left(\frac \nu a \right)

Hn is the Hermite's polynomial. If a = 1 then the Gauss-Hermite functions are eigenfunctions of the Fourier transform operator. For a derivation, see Hermite polynomial. The formula reduces to 206 for n = 0.

Distributions

The Fourier transforms in this table may be found in (Erdélyi 1954) or the appendix of (Kammler 2000).

Function Fourier transform
unitary, ordinary frequency
Fourier transform
unitary, angular frequency
Fourier transform
non-unitary, angular frequency
Remarks
\displaystyle f(x) \displaystyle \hat{f}(\xi)=

\displaystyle \int_{-\infty}^{\infty}f(x) e^{-2\pi ix\xi}\,dx

\displaystyle \hat{f}(\omega)=

\displaystyle \frac{1}{\sqrt{2 \pi}} \int_{-\infty}^{\infty} f(x) e^{-i \omega x}\, dx

\displaystyle \hat{f}(\nu)=

\displaystyle \int_{-\infty}^{\infty} f(x) e^{-i\nu x}\, dx

301 \displaystyle 1 \displaystyle \delta(\xi) \displaystyle \sqrt{2\pi}\cdot \delta(\omega) \displaystyle 2\pi\delta(\nu) The distribution δ(ξ) denotes the Dirac delta function.
302 \displaystyle \delta(x)\, \displaystyle 1 \displaystyle \frac{1}{\sqrt{2\pi}}\, \displaystyle 1 Dual of rule 301.
303 \displaystyle e^{i a x} \displaystyle \delta\left(\xi - \frac{a}{2\pi}\right) \displaystyle \sqrt{2 \pi}\cdot \delta(\omega - a) \displaystyle 2 \pi\delta(\nu - a) This follows from 103 and 301.
304 \displaystyle \cos (a x) \displaystyle \frac{\displaystyle \delta\left(\xi - \frac{a}{2\pi}\right)+\delta\left(\xi+\frac{a}{2\pi}\right)}{2} \displaystyle \sqrt{2 \pi}\cdot\frac{\delta(\omega-a)+\delta(\omega+a)}{2}\, \displaystyle \pi\left(\delta(\nu-a)+\delta(\nu+a)\right) This follows from rules 101 and 303 using Euler's formula: \textstyle \cos(a x) =

(eiax + e iax) / 2.

305 \displaystyle \sin( ax) \displaystyle \frac{\displaystyle\delta\left(\xi-\frac{a}{2\pi}\right)-\delta\left(\xi+\frac{a}{2\pi}\right)}{2i} \displaystyle \sqrt{2 \pi}\cdot\frac{\delta(\omega-a)-\delta(\omega+a)}{2i} \displaystyle -i\pi\left(\delta(\nu-a)-\delta(\nu+a)\right) This follows from 101 and 303 using \textstyle \sin(a x) =

(eiaxe iax) / (2i).

306 \displaystyle \cos ( a x^2 ) \displaystyle \sqrt{\frac{\pi}{a}} \cos \left( \frac{\pi^2 \xi^2}{a} - \frac{\pi}{4} \right)  \displaystyle \frac{1}{\sqrt{2 a}} \cos \left( \frac{\omega^2}{4 a} - \frac{\pi}{4} \right) \displaystyle \sqrt{\frac{\pi}{a}} \cos \left( \frac{\nu^2}{4 a} - \frac{\pi}{4} \right)
307 \displaystyle \sin ( a x^2 ) \, \displaystyle - \sqrt{\frac{\pi}{a}}  \sin \left( \frac{\pi^2 \xi^2}{a} - \frac{\pi}{4} \right)  \displaystyle \frac{-1}{\sqrt{2 a}} \sin \left( \frac{\omega^2}{4 a} - \frac{\pi}{4} \right) \displaystyle -\sqrt{\frac{\pi}{a}}\sin \left( \frac{\nu^2}{4 a} - \frac{\pi}{4} \right)
308 \displaystyle x^n\, \displaystyle \left(\frac{i}{2\pi}\right)^n \delta^{(n)} (\xi)\, \displaystyle i^n \sqrt{2\pi} \delta^{(n)} (\omega)\, \displaystyle 2\pi i^n\delta^{(n)} (\nu)\, Here, n is a natural number and \textstyle \delta^{(n)}(\xi) is the n-th distribution derivative of the Dirac delta function. This rule follows from rules 107 and 301. Combining this rule with 101, we can transform all polynomials.
309 \displaystyle \frac{1}{x} \displaystyle -i\pi\sgn(\xi) \displaystyle -i\sqrt{\frac{\pi}{2}}\sgn(\omega) \displaystyle -i\pi\sgn(\nu) Here sgn(ξ) is the sign function. Note that 1/x is not a distribution. It is necessary to use the Cauchy principal value when testing against Schwartz functions. This rule is useful in studying the Hilbert transform.
310 \displaystyle \frac{1}{x^n} :=

\displaystyle\frac{(-1)^{n-1}}{(n-1)!}\frac{d^n}{dx^n}\log |x|

\displaystyle -i\pi \frac{(-2\pi i\xi)^{n-1}}{(n-1)!} \sgn(\xi) \displaystyle -i\sqrt{\frac{\pi}{2}}\cdot \frac{(-i\omega)^{n-1}}{(n-1)!}\sgn(\omega) \displaystyle -i\pi \frac{(-i\nu)^{n-1}}{(n-1)!}\sgn(\nu) 1/xn is the homogeneous distribution defined by the distributional derivative \textstyle\frac{(-1)^{n-1}}{(n-1)!}\frac{d^n}{dx^n}\log|x|
311 \displaystyle |x|^\alpha\, \displaystyle -2 \frac{\sin(\pi\alpha/2)\Gamma(\alpha+1)}{|2\pi\xi|^{\alpha+1}} \displaystyle \frac{-2}{\sqrt{2\pi}}\frac{\sin(\pi\alpha/2)\Gamma(\alpha+1)}{|\omega|^{\alpha+1}} \displaystyle -2\frac{\sin(\pi\alpha/2)\Gamma(\alpha+1)}{|\nu|^{\alpha+1}} This formula is valid for 0 > α > −1. For α > 0 some singular terms arise at the origin that can be found by differentiating 318. If Re α > −1, then | x | α is a locally integrable function, and so a tempered distribution. The function \textstyle \alpha\mapsto |x|^\alpha is a holomorphic function from the right half-plane to the space of tempered distributions. It admits a unique meromorphic extension to a tempered distribution, also denoted | x | α for α ≠ −2, −4, ... (See homogeneous distribution.)
312 \displaystyle \sgn(x) \displaystyle \frac{1}{i\pi \xi} \displaystyle \sqrt{\frac{2}{\pi}} \frac{1}{i\omega } \displaystyle \frac{2}{i\nu } The dual of rule 309. This time the Fourier transforms need to be considered as Cauchy principal value.
313 \displaystyle u(x) \displaystyle \frac{1}{2}\left(\frac{1}{i \pi \xi} + \delta(\xi)\right) \displaystyle \sqrt{\frac{\pi}{2}} \left( \frac{1}{i \pi \omega} + \delta(\omega)\right) \displaystyle \pi\left( \frac{1}{i \pi \nu} + \delta(\nu)\right) The function u(x) is the Heaviside unit step function; this follows from rules 101, 301, and 312.
314 \displaystyle \sum_{n=-\infty}^{\infty} \delta (x - n T) \displaystyle \frac{1}{T} \sum_{k=-\infty}^{\infty} \delta \left( \xi -\frac{k }{T}\right) \displaystyle \frac{\sqrt{2\pi }}{T}\sum_{k=-\infty}^{\infty} \delta \left( \omega -\frac{2\pi k}{T}\right) \displaystyle \frac{2\pi}{T}\sum_{k=-\infty}^{\infty} \delta \left( \nu -\frac{2\pi k}{T}\right) This function is known as the Dirac comb function. This result can be derived from 302 and 102, together with the fact that \sum_{n=-\infty}^{\infty} e^{inx}=

2\pi\sum_{k=-\infty}^{\infty} \delta(x+2\pi k) as distributions.

315 \displaystyle J_0 (x) \displaystyle \frac{2\, \operatorname{rect}(\pi\xi)}{\sqrt{1 - 4 \pi^2 \xi^2}} \displaystyle \sqrt{\frac{2}{\pi}} \cdot \frac{\operatorname{rect}\left( \displaystyle \frac{\omega}{2} \right)}{\sqrt{1 - \omega^2}} \displaystyle \frac{2\,\operatorname{rect}\left(\displaystyle\frac{\nu}{2} \right)}{\sqrt{1 - \nu^2}} The function J0(x) is the zeroth order Bessel function of first kind.
316 \displaystyle J_n (x) \displaystyle \frac{2 (-i)^n T_n (2 \pi \xi) \operatorname{rect}(\pi \xi)}{\sqrt{1 - 4 \pi^2 \xi^2}} \displaystyle \sqrt{\frac{2}{\pi}} \frac{ (-i)^n T_n (\omega) \operatorname{rect} \left( \displaystyle\frac{\omega}{2} \right)}{\sqrt{1 - \omega^2}} \displaystyle \frac{2(-i)^n T_n (\nu) \operatorname{rect} \left(\displaystyle \frac{\nu}{2} \right)}{\sqrt{1 - \nu^2}} This is a generalization of 315. The function Jn(x) is the n-th order Bessel function of first kind. The function Tn(x) is the Chebyshev polynomial of the first kind.
317 \displaystyle \log \left| x \right| \displaystyle -\frac{1}{2} \frac{1}{\left| \xi \right|} - \gamma \delta \left( \xi \right) \displaystyle -\frac{\sqrt{\pi / 2}}{\left| \omega \right|} - \sqrt{2 \pi} \gamma \delta \left( \omega \right) \displaystyle -\frac{\pi}{\left| \nu \right|} - 2 \pi \gamma \delta \left( \nu \right) γ is the Euler–Mascheroni constant.
318 \displaystyle \left( \mp ix \right)^{-\alpha} \displaystyle \frac{\left(2\pi\right)^\alpha}{\Gamma\left(\alpha\right)}u\left(\pm \xi \right)\left(\pm \xi \right)^{\alpha-1} \displaystyle \frac{\sqrt{2\pi}}{\Gamma\left(\alpha\right)}u\left(\pm\omega\right)\left(\pm\omega\right)^{\alpha-1} \displaystyle \frac{2\pi}{\Gamma\left(\alpha\right)}u\left(\pm\nu\right)\left(\pm\nu\right)^{\alpha-1} This formula is valid for 1 > α > 0. Use differentiation to drive formula for higher exponents. u is the Heaviside function.

Two-dimensional functions

Functions (400 to 402) Fourier transform
unitary, ordinary frequency
Fourier transform
unitary, angular frequency
Fourier transform
non-unitary, angular frequency
400 \displaystyle f(x,y) \displaystyle \hat{f}(\xi_x, \xi_y)=

\displaystyle \iint f(x,y) e^{-2\pi i(\xi_x x+\xi_y y)}\,dxdy

\displaystyle \hat{f}(\omega_x,\omega_y)=

\displaystyle \frac{1}{2 \pi} \iint f(x,y) e^{-i (\omega_x x +\omega_y y)}\, dxdy

\displaystyle \hat{f}(\nu_x,\nu_y)=

\displaystyle \iint f(x,y) e^{-i(\nu_x x+\nu_y y)}\, dxdy

401 \displaystyle e^{-\pi\left(a^2x^2+b^2y^2\right)} \displaystyle \frac{1}{|ab|} e^{-\pi\left(\xi_x^2/a^2 + \xi_y^2/b^2\right)} \displaystyle \frac{1}{2\pi\cdot|ab|} e^{\frac{-\left(\omega_x^2/a^2 + \omega_y^2/b^2\right)}{4\pi}} \displaystyle \frac{1}{|ab|} e^{\frac{-\left(\nu_x^2/a^2 + \nu_y^2/b^2\right)}{4\pi}}
402 \displaystyle \mathrm{circ}(\sqrt{x^2+y^2}) \displaystyle \frac{J_1\left(2 \pi \sqrt{\xi_x^2+\xi_y^2}\right)}{\sqrt{\xi_x^2+\xi_y^2}} \displaystyle \frac{J_1\left(\sqrt{\omega_x^2+\omega_y^2}\right)}{\sqrt{\omega_x^2+\omega_y^2}} \displaystyle \frac{2\pi J_1\left(\sqrt{\nu_x^2+\nu_y^2}\right)}{\sqrt{\nu_x^2+\nu_y^2}}
Remarks

To 400: The variables ξx, ξy, ωx, ωy, νx and νy are real numbers. The integrals are taken over the entire plane.

To 401: Both functions are Gaussians, which may not have unit volume.

To 402: The function is defined by circ(r)=1 0≤r≤1, and is 0 otherwise. This is the Airy distribution, and is expressed using J1 (the order 1 Bessel function of the first kind). (Stein & Weiss 1971, Thm. IV.3.3)

Formulas for general n-dimensional functions

Function Fourier transform
unitary, ordinary frequency
Fourier transform
unitary, angular frequency
Fourier transform
non-unitary, angular frequency
500 \displaystyle f(x)\, \displaystyle \hat{f}(\xi)=

\displaystyle \int_{\mathbb{R}^n}f(x) e^{-2\pi i x\cdot\xi }\, d^n x

\displaystyle \hat{f}(\omega)=

\displaystyle \frac{1}{{(2 \pi)}^{(n/2)}} \int_{\mathbb{R}^n} f(x) e^{-i \omega\cdot x}\, d^nx

\displaystyle \hat{f}(\nu)=

\displaystyle \int_{\mathbb{R}^n}f(x) e^{-i x\cdot\nu }\, d^nx

501 \displaystyle \chi_{[0,1]}(|x|)(1-|x|^2)^\delta \displaystyle \pi^{-\delta}\Gamma(\delta+1)|\xi|^{-(n/2)-\delta}
\displaystyle \cdot J_{n/2+\delta}(2\pi|\xi|)
\displaystyle 2^{-\delta}\Gamma(\delta+1)\left|\omega\right|^{-(n/2)-\delta}
\displaystyle \cdot J_{n/2+\delta}(|\omega|)
\displaystyle \pi^{-\delta}\Gamma(\delta+1)\left|\frac{\nu}{2\pi}\right|^{-(n/2)-\delta}
\displaystyle \cdot J_{n/2+\delta}(|\nu|)
502 \displaystyle |x|^{-\alpha},\quad 0<\operatorname{Re}\, \alpha<n. \displaystyle c_\alpha |\xi|^{-(n-\alpha)}
Remarks

To 501: The function χ[0,1] is the indicator function of the interval [0, 1]. The function Γ(x) is the gamma function. The function Jn/2 + δ is a Bessel function of the first kind, with order n/2 + δ. Taking n = 2 and δ = 0 produces 402. (Stein & Weiss 1971, Thm. 4.13)

To 502: See Riesz potential. The formula also holds for all α ≠ −n, −n − 1, ... by analytic continuation, but then the function and its Fourier transforms need to be understood as suitably regularized tempered distributions. See homogeneous distribution.

See also

References

  • Boashash, B., ed. (2003), Time-Frequency Signal Analysis and Processing: A Comprehensive Reference, Oxford: Elsevier Science, ISBN 0080443354 
  • Bochner S., Chandrasekharan K. (1949), Fourier Transforms, Princeton University Press 
  • Bracewell, R. N. (2000), The Fourier Transform and Its Applications (3rd ed.), Boston: McGraw-Hill, ISBN 0071160434 .
  • Campbell, George; Foster, Ronald (1948), Fourier Integrals for Practical Applications, New York: D. Van Nostrand Company, Inc. .
  • Duoandikoetxea, Javier (2001), Fourier Analysis, American Mathematical Society, ISBN 0-8218-2172-5 .
  • Dym, H; McKean, H (1985), Fourier Series and Integrals, Academic Press, ISBN 978-0122264511 .
  • Erdélyi, Arthur, ed. (1954), Tables of Integral Transforms, 1, New Your: McGraw-Hill 
  • Fourier, J. B. Joseph (1822), Théorie Analytique de la Chaleur, Paris, http://books.google.com/?id=TDQJAAAAIAAJ&printsec=frontcover&dq=Th%C3%A9orie+analytique+de+la+chaleur&q 
  • Grafakos, Loukas (2004), Classical and Modern Fourier Analysis, Prentice-Hall, ISBN 0-13-035399-X .
  • Hewitt, Edwin; Ross, Kenneth A. (1970), Abstract harmonic analysis. Vol. II: Structure and analysis for compact groups. Analysis on locally compact Abelian groups, Die Grundlehren der mathematischen Wissenschaften, Band 152, Berlin, New York: Springer-Verlag, MR0262773 .
  • Hörmander, L. (1976), Linear Partial Differential Operators, Volume 1, Springer-Verlag, ISBN 978-3540006626 .
  • James, J.F. (2011), A Student's Guide to Fourier Transforms (3rd ed.), New York: Cambridge University Press, ISBN 978-0-521-17683-5 .
  • Kaiser, Gerald (1994), A Friendly Guide to Wavelets, Birkhäuser, ISBN 0-8176-3711-7 
  • Kammler, David (2000), A First Course in Fourier Analysis, Prentice Hall, ISBN 0-13-578782-3 
  • Katznelson, Yitzhak (1976), An introduction to Harmonic Analysis, Dover, ISBN 0-486-63331-4 
  • Knapp, Anthony W. (2001), Representation Theory of Semisimple Groups: An Overview Based on Examples, Princeton University Press, ISBN 978-0-691-09089-4, http://books.google.com/?id=QCcW1h835pwC 
  • Pinsky, Mark (2002), Introduction to Fourier Analysis and Wavelets, Brooks/Cole, ISBN 0-534-37660-6 
  • Polyanin, A. D.; Manzhirov, A. V. (1998), Handbook of Integral Equations, Boca Raton: CRC Press, ISBN 0-8493-2876-4 .
  • Rudin, Walter (1987), Real and Complex Analysis (Third ed.), Singapore: McGraw Hill, ISBN 0-07-100276-6 .
  • Stein, Elias; Shakarchi, Rami (2003), Fourier Analysis: An introduction, Princeton University Press, ISBN 0-691-11384-X .
  • Stein, Elias; Weiss, Guido (1971), Introduction to Fourier Analysis on Euclidean Spaces, Princeton, N.J.: Princeton University Press, ISBN 978-0-691-08078-9 .
  • Wilson, R. G. (1995), Fourier Series and Optical Transform Techniques in Contemporary Optics, New York: Wiley, ISBN 0471303577 .
  • Yosida, K. (1968), Functional Analysis, Springer-Verlag, ISBN 3-540-58654-7 .

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Fourier transform — Fourier transformacija statusas T sritis automatika atitikmenys: angl. Fourier transform; Fourier transformation vok. Fourier Transformation, f rus. преобразование Фурье, n pranc. transformation de Fourier, f; transformée de Fourier, f ryšiai:… …   Automatikos terminų žodynas

  • Fourier transform — Math. a mapping of a function, as a signal, that is defined in one domain, as space or time, into another domain, as wavelength or frequency, where the function is represented in terms of sines and cosines. [1920 25; see FOURIER ANALYSIS] * * *… …   Universalium

  • Fourier transform — Furjė atvaizdis statusas T sritis fizika atitikmenys: angl. Fourier transform vok. Fourier Transformierte, f rus. образ Фурье, m; трансформанта Фурье, f; Фурье образ, m pranc. image de Fourier, f; transformée de Fourier, f; transfouriée, f …   Fizikos terminų žodynas

  • Fourier transform — (FT)    A mathematical operation which converts a function of one independent variable to one of a different independent variable. In FT–IR spectroscopy, the Fourier transform converts a time function (the interferogram) to a frequency function… …   Forensic science glossary

  • Fourier transform spectroscopy — is a measurement technique whereby spectra are collected based on measurements of the temporal coherence of a radiative source, using time domain measurements of the electromagnetic radiation or other type of radiation.It can be applied to a… …   Wikipedia

  • Fourier transform ion cyclotron resonance — Infobox chemical analysis name = Fourier transform ion cyclotron resonance caption =A FTMS instrument at the Pacific Northwest National Laboratory, USA acronym = FTMS, FTICR classification =Mass spectrometry analytes = manufacturers = related =… …   Wikipedia

  • Fourier transform on finite groups — In mathematics, the Fourier transform on finite groups is a generalization of the discrete Fourier transform from cyclic to arbitrary finite groups.DefinitionsThe Fourier transform of a function f : G ightarrow mathbb{C},at a representation ho,… …   Wikipedia

  • Fourier-transform spectroscopy — Furjė spektroskopija statusas T sritis Standartizacija ir metrologija apibrėžtis Optinės spektroskopijos metodas, kuriuo spektras gaunamas dviem pakopomis: pirmiausiai registruojama tiriamosios spinduliuotės interferograma, po to Furjė keitimo… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • Fourier-transform spectroscopy — Furjė spektroskopija statusas T sritis Standartizacija ir metrologija apibrėžtis Spektroskopijos metodas, kuriuo randamas spektras: pirmiausia užrašoma tiriamosios spinduliuotės interferograma, tada atliekama jos Furjė analizė. atitikmenys: angl …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • Fourier-transform spectroscopy — Furjė spektroskopija statusas T sritis fizika atitikmenys: angl. Fourier spectroscopy; Fourier transform spectroscopy vok. Fourier Spektroskopie, f rus. спектроскопия Фурье, f; Фурье спектроскопия, f pranc. spectroscopie de Fourier, f;… …   Fizikos terminų žodynas

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”