Organocopper compound

Organocopper compound
Lithium diphenylcuprate etherate dimer from crystal structure
Skeletal formula of lithium diphenylcuprate etherate dimer

Organocopper compounds in organometallic chemistry contain carbon to copper chemical bonds. Organocopper chemistry is the science of organocopper compounds describing their physical properties, synthesis and reactions.[1][2][3] They are reagents in organic chemistry.

Contents

Brief history

The first organocopper compound, the explosive copper(I) acetylide Cu2C2 (Cu-C≡C-Cu), was synthesized by Rudolf Christian Böttger in 1859 by passing acetylene gas through copper(I) chloride solution:[4]

C2H2 + 2 CuCl → Cu2C2 + 2 HCl

Henry Gilman prepared methylcopper in 1936. In 1941, Kharash discovered that reaction of a Grignard reagent with cyclohexenone in presence of Cu(I) resulted in 1,4-addition instead of 1,2-addition.[5] In 1952 Gilman investigated for the first time dialkylcuprates. In the 1960s, complexes of alkenes and CO with copper(I) were established.

Properties

Organocopper compounds are very reactive towards oxygen and water forming copper(I) oxide and tend to be thermally unstable. Because most cuprates are salts, many are generally insoluble in nonpolar solvents. Despite these difficulties, organocopper reagents are frequently generated and consumed in situ with no attempt to isolate them. They are used very frequently in organic chemistry as alkylating reagents because they exhibit more functional group tolerance than corresponding Grignard and organolithium reagents. The electronegativity of copper is much higher than its next-door neighbour in the group 12 elements, zinc, suggesting less nucleophilicity for its carbon ligands.

Copper belongs to the group of coinage metals together with silver and gold and their chemistries have many similarities. The oxidation state can be +1 or +2 and intermediates can have oxidation state +3. Monovalent alkylcopper compounds (RCu) are polymeric but form cuprates (R2CuLi) upon treatment with organolithium compounds (RLi). These cuprates are sometimes referred to as Gilman reagents. Organocopper compounds can be stabilized by complexation to a variety of ligands such as organophosphanes (R3P), thioethers (R2S), and cyanide (CN-).

The cuprates complex form complicated aggregates both in crystalline form and in solution. Lithium dimethylcuprate is a dimer in diethyl ether forming an 8-membered ring with two lithium atoms coordinating between two methyl groups. Similarly, lithium diphenylcuprate forms a dimeric etherate, [{Li(OEt2)}(CuPh2)]2, in the solid state.[6]

Organocopper aggregates

The first ever crystal structure was determined in 1972 by Lappert for CuCH2SiMe3. This compound is relatively stable because the bulky trimethylsilyl groups provide steric protection. It is a tetramer forming an 8-membered ring with alternating Cu-C bonds. In addition the four copper atoms form a planar Cu4 ring based on three-center two-electron bonds. The copper to copper bond length is 242 pm compared to 256 pm in bulk copper. In pentamesitylpentacopper a 5-membered copper ring is formed and pentafluorophenylcopper is a tetramer.[7]

With carbon monoxide copper forms a non-classical metal carbonyl.

Cu(III) intermediates

In many organometallic reactions involving copper, the reaction mechanism invokes a copper intermediate with oxidation state +3. For instance, in reductive elimination processes, Cu(III) is reduced to Cu(I). However Cu(III) compounds are rare in chemistry in general and until recently organocopper(III) species have been elusive. In 2007 the first spectroscopic evidence was obtained for the involvement of Cu(III) in the conjugate addition of the Gilman reagent to an enone:[8] In a so-called rapid-injection NMR experiment at -100°C, the Gilman reagent Me2CuLi (stabilized by lithium iodide) was introduced to cyclohexenone (1) enabling the detection of the copper — alkene pi complex 2. On subsequent addition of trimethylsilyl cyanide the Cu(III) species 3 is formed (indefinitely stable at that temperature) and on increasing the temperature to -80°C the conjugate addition product 4. According to an accompanying in silico experiments [9] the Cu(III) intermediate has a square planar molecular geometry with the cyano group in cis orientation with respect to the cyclohexenyl methine group and anti-parallel to the methine proton. With other ligands than the cyano group this study predicts room temperature stable Cu(III) compounds.

A Cu(III) intermediate characterized by NMR.[8]

Synthesis

Copper halides react with organolithium reagents to form the organocopper compound. Phenylcopper is prepared by reaction of phenyllithium with copper(I) bromide in diethyl ether. Reaction with a second equivalent of R-Li to R-Cu then gives the lithium diorganocopper compound. Copper halides also react with Grignard reagents. The compound pentamesitylpentacopper is prepared from mesityl magnesium bromide and copper(I) chloride. Copper salts add to terminal alkynes to form copper acetylides The copper metallocene (η-cyclopentadienyl triethylphosphine) copper can be prepared by reaction of copper(II) oxide with cyclopentadiene and triethylphosphine in pentane at reflux.

Reactions

Organocopper reactions are classified in a number of reaction types.

Substitution reactions

Substitution reactions of cuprates R2CuLi to alkyl halides R'-X gives the alkylcopper compound R-Cu, the coupling product R-R', and the lithium halide Li-X. The reaction mechanism is based on nucleophilic attack, namely oxidative addition of the alkyl halide to Cu(I) elevating it to a planar Cu(III) intermediate followed by reductive elimination. The nucleophilic attack is the rate-determining step. In the case for substitution of iodide, single electron transfer mechanism is proposed (see figure).

Organocopper nucleophilic substitution

Many electrophiles will work. The approximate order of reactivity, beginning with the most reactive, is as follows: acid chlorides[10] > aldehydes > tosylates ~ epoxides > iodides > bromides > chlorides > ketones > esters > nitriles >> alkenes

Coupling reactions

Oxidative coupling is the coupling of copper acetylides to conjugated alkynes in the Glaser coupling (for example in the synthesis of cyclooctadecanonaene) or to aryl halides in the Castro-Stephens Coupling

Reductive coupling is a coupling reaction of aryl halides with a stoichiometric equivalent of copper metal that occurs in the Ullmann reaction. In an example of a present-day cross-coupling reaction called decarboxylative coupling, a catalytic amount of Cu(I) displaces a carboxyl group forming the arylcopper (ArCu) intermediate. Simultaneously, a palladium catalyst converts an aryl bromide to the organopalladium intermediate (Ar'PdBr), and on transmetallation the biaryl is formed from ArPdAr'.[11][12]

Decarboxylative aryl-aryl coupling

Redox neutral coupling is the coupling of terminal alkynes with halo-alkynes with a copper(I) salt in the Cadiot-Chodkiewicz coupling. Thermal coupling of two organocopper compounds is also possible.

Conjugate addition

Conjugate additions to enones are done with organocuprates. Note that if a Grignard reagent (such as RMgBr) is used, the reaction with an enone would instead proceed through a 1,2-addition.[13] The 1,4-addition mechanism of cuprates to enones goes through the nucleophilic addition of the Cu(I) species at the beta-carbon of the alkene to form a Cu(III) intermediate, followed by reductive elimination of Cu(I).[14] In the original paper describing this reaction, methylmagnesium bromide is reacted with isophorone with and without 1 mole percent of added copper chloride (see figure).[5]

Addition of methylmagnesium bromide to isophorone.[5]

Without added salt the main products are alcohol B (42%) from nucleophilic addition to the carbonyl group and diene C (48%) as its dehydration reaction product. With added salt the main product is 1,4-adduct A (82%) with some C (7%).

A 1,6-addition is also possible, for example in one step of the commercial-scale production of fulvestrant [15]:

Fulvestrant organic synthesis brazier 2010

Carbocupration

Carbocupration is a nucleophilic addition of organocopper reagents (R-Cu) to acetylene or terminal alkynes resulting in an alkenylcopper compound (RC=C-Cu).[16] It is a special case of carbometalation and also called the Normant reaction.[17]

See also

  • Chemistries of carbon with other elements of the periodic table:
CH He
CLi CBe CB CC CN CO CF Ne
CNa CMg CAl CSi CP CS CCl CAr
CK CCa CSc CTi CV CCr CMn CFe CCo CNi CCu CZn CGa CGe CAs CSe CBr CKr
CRb CSr CY CZr CNb CMo CTc CRu CRh CPd CAg CCd CIn CSn CSb CTe CI CXe
CCs CBa CHf CTa CW CRe COs CIr CPt CAu CHg CTl CPb CBi CPo CAt Rn
Fr Ra Rf Db Sg Bh Hs Mt Ds Rg Cn Uut Uuq Uup Uuh Uus Uuo
CLa CCe CPr CNd CPm CSm CEu CGd CTb CDy CHo CEr CTm CYb CLu
Ac Th Pa CU Np Pu Am Cm Bk Cf Es Fm Md No Lr
Chemical bonds to carbon
Core organic chemistry Many uses in chemistry
Academic research, but no widespread use Bond unknown / not assessed

References

  1. ^ Gary H. Posner (1980). An introduction to synthesis using organocopper reagents. New York: Wiley: Wiley. ISBN 0-471-69538-6. 
  2. ^ W.A. Herrmann, ed (1999). Synthetic Methods of Organometallic and Inorganic Chemistry. 5, Copper, Silver, Gold, Zinc, Cadmium, and Mercury. Stuttgart: Thieme. ISBN 3-13-103061-5. 
  3. ^ Christoph Elschenbroich (2006). Organometallics (3 ed.). Weinheim: Wiley-VCH. ISBN 3-527-29390-6. 
  4. ^ R. C. Böttger (1859). "Ueber die Einwirkung des Leuchtgases auf verschiedene Salzsolutionen, insbesondere auf eine ammoniakalische Kupferchlorürlösung". Annalen 109 (3): 351. doi:10.1002/jlac.18591090318. 
  5. ^ a b c Kharasch, M. S.; Tawney, P. O. (1941). Journal of the American Chemical Society 63 (9): 2308. doi:10.1021/ja01854a005. 
  6. ^ N. P. Lorenzen, E. Weiss (1990). "Synthesis and Structure of a Dimeric Lithium Diphenylcuprate:[{Li(OEt)2}(CuPh2)]2". Angew. Chem. Int. Ed. 29 (3): 300–302. doi:10.1002/anie.199003001. 
  7. ^ A. Cairncross et al. (1988), "Pentafluorophenylcopper tetramer, a reagent for synthesis of fluorinated aromatic compounds. [Copper, tetrakis(pentafluorophenyl)tetra"], Org. Synth. 6: 875, http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv6p0875  Vol. 59, p.122 (1979)
  8. ^ a b Bertz, Steven H.; Cope, Stephen; Murphy, Michael; Ogle, Craig A.; Taylor, Brad J. (2007). "Rapid Injection NMR in Mechanistic Organocopper Chemistry. Preparation of the Elusive Copper(III) Intermediate1". Journal of the American Chemical Society 129 (23): 7208. doi:10.1021/ja067533d. PMID 17506552. 
  9. ^ Hu, Haipeng; Snyder, James P. (2007). "Organocuprate Conjugate Addition:  The Square-Planar "CuIII" Intermediate". Journal of the American Chemical Society 129 (23): 7210. doi:10.1021/ja0675346. PMID 17506553. 
  10. ^ For an example see: G. H. Posner et al. (1988), "Secondary and tertiary alkyl ketones from carboxylic acid chlorides and lithium phenylthio(alkyl)cuprate reagents: tert-butyl phenyl ketone. [1-Propanone, 2,2-dimethyl-1-phenyl"], Org. Synth. 6: 248, http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv6p0248 ; Vol. 55, p.122 (1976)
  11. ^ Goossen, L. J.; Deng, G; Levy, LM (2006). "Synthesis of Biaryls via Catalytic Decarboxylative Coupling". Science 313 (5787): 662. doi:10.1126/science.1128684. PMID 16888137. 
  12. ^ Reagents: base potassium carbonate, solvent NMP, catalysts palladium acetylacetonate, Copper(I) iodide, MS stands for molecular sieves, ligand phenanthroline
  13. ^ For an example: Organic Syntheses, Coll. Vol. 9, p.328 (1998); Vol. 72, p.135 (1995) Link.
  14. ^ Nakamura, Eiichi; Mori, Seiji (2000). "Wherefore Art Thou Copper? Structures and Reaction Mechanisms of Organocuprate Clusters in Organic Chemistry". Angewandte Chemie 39 (21): 3750. doi:10.1002/1521-3773(20001103)39:21<3750::AID-ANIE3750>3.0.CO;2-L. PMID 11091452. 
  15. ^ Fulvestrant: From the Laboratory to Commercial-Scale Manufacture Eve J. Brazier, Philip J. Hogan, Chiu W. Leung, Anne O’Kearney-McMullan, Alison K. Norton, Lyn Powell,Graham E. Robinson, and Emyr G. Williams Organic Process Research & Development 2010, 14, 544–552 doi:10.1021/op900315j
  16. ^ For an example: Organic Syntheses, Coll. Vol. 7, p.236 (1990); Vol. 64, p.1 (1986) Link
  17. ^ Normant, J (1971). "Synthese stereospecifique and reactivite d' organocuivreux vinyliques". Tetrahedron Letters 12 (27): 2583. doi:10.1016/S0040-4039(01)96925-4. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • organocopper — adjective Describing any organic compound containing a carbon to copper bond …   Wiktionary

  • Copper — For other uses, see Copper (disambiguation) …   Wikipedia

  • Cuprate — For cuprate superconductors, see High temperature superconductivity#Cuprates. The unit cell of high temperature cuprate superconductor BSCCO 2212 Cuprates (from Latin cuprum meaning copper) are chemical compounds containing copper anion. Cuprates …   Wikipedia

  • Corey–House synthesis — The Corey–Posner, Whitesides–House synthesis (also called the Corey–Posner, Whitesides–House reaction) is an organic reaction that involves the reaction of a lithium dialkyl cuprate with an alkyl halide to form a new alkane, an organocopper… …   Wikipedia

  • Cadmium chloride — Chembox new Name = Cadmium chloride ImageFile = Cadmium chloride hemipentahydrate.jpg ImageName = Cadmium chloride hemipentahydrate ImageFile1 = Cadmium chloride 3D balls.png ImageName1 = Cadmium chloride ImageFile2 = Cadmium chloride 3D… …   Wikipedia

  • Carbometalation — is an organometallic reaction involving the nucleophilic addition to alkenes and alkynes of a diverse range of organometallic reagents such as organolithium compounds, organocopper compounds and Grignard reagents according to the following… …   Wikipedia

  • Sonogashira coupling — In organic chemistry, a Sonogashira coupling is a coupling reaction of terminal alkynes with aryl or vinyl halides. This reaction was first reported by Kenkichi Sonogashira and Nobue Hagihara in 1975. [cite journal author = K. Sonogashira, Y.… …   Wikipedia

  • Ullmann reaction — The Ullmann reaction or Ullmann coupling [cite journal title = The Ullmann Synthesis of Biaryls author = P.E. Fanta journal = Synthesis volume = 1974 issue = pages = 9–21 year = 1974 url = doi = 10.1055/s 1974 23219 ] is a coupling reaction… …   Wikipedia

  • Castro-Stephens coupling — The Castro Stephens Coupling is a cross coupling reaction between a Copper(I) acetylide and an aryl halide forming a disubstituted alkyne and a copper(I) halide. :The reaction was discovered in 1963 by chemists Casto and Stephens [ The… …   Wikipedia

  • cuprate — noun a) Any of several non stoichiometric compounds, of general formula XYCuO, many of which are superconductors b) Any organocopper compound of general formula RCu …   Wiktionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”