High-lift device

High-lift device

In aircraft design, high-lift devices are a variety of mechanisms intended to add lift during certain portions of flight. They include common devices such as flaps and slats, as well as less common devices such as leading edge extensions and blown flaps. Generally they are divided into two classes by engineers, "powered" and "unpowered".

All aircraft designs include a number of compromises intended to maximize performance for a particular role. One of the most fundamental of these is the size of the wing; a larger wing will provide more lift and make takeoffs and landings shorter and easier, but increase drag during cruising and thereby lead to lower fuel economy. High-lift devices are used to smooth out the differences between the two goals, allowing the use of an efficient cruising wing, and adding lift for takeoff and landing.

The most common high-lift device is the flap, a movable portion of the rear wing that can be bent down into the airflow to produce extra lift. The effect of the flap is not as obvious as it may seem; the real goal is to re-shape the wing as a whole into one that has more camber as well as being longer. In general wings with more camber and chord will produce more lift for any given amount of drag. It is the second goal, making the wing longer, that results in the complex flap arrangements found on many modern aircraft. The first "travelling flaps" that moved rearward were starting to be used just before World War II due to efforts at Arado, and have been followed by increasingly complex systems made up of several parts, known as "slots". Large modern airliners make use of "triple-slotted flaps" to produce the massive lift required during takeoff.

Another common high-lift device is the slat, what appears to be a flap at the front of the wing. In fact the action of the slat is very different than the flap, as it does not directly produce extra lift. Instead the slat re-directs the airflow at the front of the wing, allowing it to flow more smoothly over the surface while at a high angle of attack. This allows the wing to be operated effectively at higher angles, which produce more lift. The original slats were patented by Handley-Page in 1919, and by the 1930s had developed into a system that operated automatically when the airflow over the wing reduced pressure on the leading edge, small springs would then push the slat out. More modern systems, like modern flaps, are more complex and typically operated hydraulically.

Although not as common, another high-lift device is the leading edge extension, or LEX. LEX systems typically consist of a thin delta wing mounted in front of the main wing, which normally generates little lift. At higher angles of attack, however, the LEX generates a vortex that is positioned to lie on the upper surface of the main wing. This reduces the pressure over the wing, leading to greater lift. LEX systems are notable for their potentially huge angles in which they operate, and are commonly found on modern fighter aircraft.

Powered high-lift systems generally use airflow from the engine to shape the flow of air over the wing, replacing or modifying the action of the flaps. Blown flaps use "bleed air" from the jet engine's compressor which is blown over the rear of the wing and flap, adding airflow and allowing the air to remain attached at higher angles of attack. In effect the airflow acts as a sort of slat for the flaps. A more advanced version of the Blown flap is the Circulation control wing; a mechanism that tangentially ejects air over a specially designed airfoil to create lift through the Coanda effect.main|Circulation control wing

A more common system uses the airflow from the engines directly, by placing a flap directly in the path of the exhaust. This is not a trivial exercise due to the power of modern engines, and most aircraft deliberately "split" the flap so the portions behind the engines do not move into the airflow. However, if the flaps can be made strong enough, the effects can be enormous. Oddly the effect is most pronounced if the engines are mounted above the wing due to the Coandă effect, which led to a number of aircraft such as the Boeing YC-14 and Antonov An-72 with high-mounted engines. The C-17 Globemaster III uses a more conventional low-mounted engine design based on the same general idea.

ee also

*boundary layer control
*Circulation control wing


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • high-lift device — Any lift modifying device such as a slot, slat, or flap that allows an airfoil to achieve a higher angle of attack before airflow separation takes place (i.e., its stalling angle is higher than without the high lift device). Slot. Flap …   Aviation dictionary

  • Lift (force) — For other uses, see Lift. Boeing 747 8F landing A fluid flowing past the surface of a body exerts a surface force on it. Lift is the component of this force that is perpendicular to the …   Wikipedia

  • lift — [1] The action of the rear end of the vehicle to rise during braking. [2] The amount by which a poppet valve rises when opened. See valve lift. [3] The aerodynamic force caused by greater pressure above the car than below it and having the effect …   Dictionary of automotive terms

  • Lift Upgrading Programme — (LUP) (Chinese: 电梯翻新) is a Singapore Housing and Development Board (HDB) project which upgrades and improves the facilities of the lifts at HDB flats which became an issue in the 2006 general election. This project is for housing blocks built… …   Wikipedia

  • Hot and high — In aviation, hot and high refers to very warm climates or very high elevations that may compromise an aircraft s ability to operate safely.Air density decreases with increasing temperature and altitude. Lower air density reduces the amount of… …   Wikipedia

  • Hot and High — Este artículo o sección necesita referencias que aparezcan en una publicación acreditada, como revistas especializadas, monografías, prensa diaria o páginas de Internet fidedignas. Puedes añadirlas así o avisar …   Wikipedia Español

  • lift — [lift] vt. [ME liften < ON lypta < lopt, air, akin to OE lyft, Ger luft, Du lucht] 1. to bring up to a higher position; raise 2. to pick up and move or set [lift the box down from the shelf] 3. to hold up; support high in the air 4. to… …   English World dictionary

  • lift — liftable, adj. lifter, n. /lift/, v.t. 1. to move or bring (something) upward from the ground or other support to a higher position; hoist. 2. to raise or direct upward: He lifted his arm in a gesture of farewell; to lift one s head. 3. to remove …   Universalium

  • lift — /lɪft / (say lift) verb (t) 1. to move or bring (something) upwards from the ground or other support to some higher position; hoist. 2. to raise or direct upwards: to lift the hand; to lift the head; to lift the eyes. 3. to hold up or display on… …  

  • lift — I. noun Etymology: Middle English, from Old English lyft Date: before 12th century chiefly Scottish heavens, sky II. verb Etymology: Middle English, from Old Norse lypta; akin to Old English lyft air more at loft Date: 14th century …   New Collegiate Dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”