Light-time correction

Light-time correction

Light-time correction is a displacement in the "apparent position" of a celestial object from its "true position" (or "geometric position") caused by the object's motion during the time it takes its light to reach an observer.

Light-time correction occurs in principle during the observation of any moving object, because the speed of light is finite. The magnitude and direction of the displacement in position depends upon the distance of the object from the observer and the motion of the object, and is measured at the instant at which the object's light reaches the observer. It is "independent" of the motion of the observer. It should be contrasted with the aberration of light, which depends upon the instantaneous velocity of the observer at the time of observation, and is independent of the motion or distance of the object.

Light-time correction can be applied to any object whose distance and motion are known. In particular, it is usually necessary to apply it to the motion of a planet or other solar system object. For this reason, the combined displacement of the apparent position due to the effects of light-time correction and aberration is known as "planetary aberration". By convention, light-time correction is not applied to the positions of stars, because their motion and distance may not be known accurately.

Calculation

A rigorous calculation of light-time correction involves an iterative process. An approximate light-time is calculated by dividing the object's geometric distance from Earth by the speed of light. Then the object's velocity is multiplied by this approximate light-time to determine its approximate displacement through space during that time. Its previous position is used to calculate a more precise light-time. This process is repeated if necessary, but one iteration is usually sufficient given the slow movements of planets.

Discovery

The effect of the finite speed of light on observations of celestial objects was first recognised by Ole Rømer in 1675, during a series of observations of eclipses of the moons of Jupiter. He found that the interval between eclipses was less when Earth and Jupiter are approaching each other, and more when they are moving away from each other. He correctly deduced that this difference was caused by the appreciable time it took for light to travel from Jupiter to the observer on Earth.

References

*P. Kenneth Seidelmann (Ed.), "Explanatory Supplement to the Astronomical Almanac" (Mill Valley, Calif., University Science Books, 1992), 23, 393.
*Arthur Berry, "A Short History of Astronomy" (John Murray, 1898 – republished by Dover, 1961), 258-265.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Aberration of light — Light from location 1 will appear to be coming from location 2 for a moving telescope due to the finite speed of light, a phenomenon known as the aberration of light. The aberration of light (also referred to as astronomical aberration or stellar …   Wikipedia

  • Time — This article is about the measurement. For the magazine, see Time (magazine). For other uses, see Time (disambiguation). The flow of sand in an hourglass can be used to keep track of elapsed time. It also concretely represents the present as… …   Wikipedia

  • Light pollution — This article is about light pollution in the visible spectrum. For information on pollution in the radio spectrum, see radio spectrum pollution. This time exposure photo of New York City at night shows skyglow, one form of light pollution …   Wikipedia

  • Light meter — A light meter is a device used to measure the amount of light. In photography, a light meter is often used to determine the proper exposure for a photograph. Typically a light meter will include a computer, either digital or analogue, which… …   Wikipedia

  • Equation of time — The equation of time is the difference over the course of a year between time as read from a sundial and time as read from a clock, measured in an ideal situation (ie. in a location at the centre of a time zone, and which does not use daylight… …   Wikipedia

  • Color correction — This article is about color correction using lighting and camera filters. For video color correction in post production, see Color grading. For color correction of still images in post production, see Color balance. For mutual color correction of …   Wikipedia

  • Gamma correction — Gamma correction, gamma nonlinearity, gamma encoding, or often simply gamma, is the name of a nonlinear operation used to code and decode luminance or tristimulus values in video or still image systems. [cite book | title = Digital Video and HDTV …   Wikipedia

  • Airborne Real-time Cueing Hyperspectral Enhanced Reconnaissance — NOTOC The Airborne Real time Cueing Hyperspectral Enhanced Reconnaissance, also known by the acronym ARCHER, is an aerial imaging system that produces ground images far more detailed than plain sight or ordinary aerial photography can.cite web… …   Wikipedia

  • Dynamic light scattering — Hypothetical Dynamic light scattering of two samples: Larger particles on the top and smaller particle on the bottom Dynamic light scattering (also known as photon correlation spectroscopy or quasi elastic light scattering) is a technique in… …   Wikipedia

  • Flat-field correction — is a technique used to improve quality in digital imaging. The goal is to remove artifacts from 2 D images that are caused by variations in the pixel to pixel sensitivity of the detector and/or by distortions in the optical path. It is a standard …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”