- Air traffic control
Air traffic control (ATC) is a service provided by ground-based controllers who direct aircraft on the ground and in the air. The primary purpose of ATC systems worldwide is to separate aircraft to prevent collisions, to organize and expedite the flow of traffic, and to provide information and other support for pilots when able. In some countries, ATC may also play a security or defense role (as in the United States), or be run entirely by the military (as in Brazil).
Preventing collisions is referred to as separation, which is a term used to prevent aircraft from coming too close to each other by use of lateral, vertical and longitudinal separation minima; many aircraft now have collision avoidance systems installed to act as a backup to ATC observation and instructions. In addition to its primary function, the ATC can provide additional services such as providing information to pilots, weather and navigation information and NOTAMs (NOtices To AirMen).
In many countries, ATC services are provided throughout the majority of airspace, and its services are available to all users (private, military, and commercial). When controllers are responsible for separating some or all aircraft, such airspace is called "controlled airspace" in contrast to "uncontrolled airspace" where aircraft may fly without the use of the air traffic control system. Depending on the type of flight and the class of airspace, ATC may issue instructions that pilots are required to follow, or merely flight information (in some countries known as advisories) to assist pilots operating in the airspace. In all cases, however, the pilot in command has final responsibility for the safety of the flight, and may deviate from ATC instructions in an emergency.
Pursuant to requirements of the International Civil Aviation Organization (ICAO), ATC operations are conducted either in the English language or the language used by the station on the ground. In practice, the native language for a region is normally used, however the English language must be used upon request.
The primary method of controlling the immediate airport environment is visual observation from the airport traffic control tower (ATCT). The ATCT is a tall, windowed structure located on the airport grounds. Aerodrome or Tower controllers are responsible for the separation and efficient movement of aircraft and vehicles operating on the taxiways and runways of the airport itself, and aircraft in the air near the airport, generally 5 to 10 nautical miles (9 to 18 km) depending on the airport procedures.
Radar displays are also available to controllers at some airports. Controllers may use a radar system called Secondary Surveillance Radar for airborne traffic approaching and departing. These displays include a map of the area, the position of various aircraft, and data tags that include aircraft identification, speed, heading, and other information described in local procedures.
The areas of responsibility for ATCT controllers fall into three general operational disciplines; Local Control or Air Control, Ground Control, and Flight Data/Clearance Delivery—other categories, such as Apron Control or Ground Movement Planner, may exist at extremely busy airports. While each ATCT may have unique airport-specific procedures, such as multiple teams of controllers ('crews') at major or complex airports with multiple runways, the following provides a general concept of the delegation of responsibilities within the ATCT environment.
Remote and Virtual Tower (RVT) is a system based on Air Traffic Controllers being located somewhere other than at the local airport tower and still able to provide Air Traffic Control services. Displays for the Air Traffic Controllers may be either optical live video and/or synthetic images based on surveillance sensor data.
Ground Control (sometimes known as Ground Movement Control abbreviated to GMC or Surface Movement Control abbreviated to SMC) is responsible for the airport "movement" areas, as well as areas not released to the airlines or other users. This generally includes all taxiways, inactive runways, holding areas, and some transitional aprons or intersections where aircraft arrive, having vacated the runway or departure gate. Exact areas and control responsibilities are clearly defined in local documents and agreements at each airport. Any aircraft, vehicle, or person walking or working in these areas is required to have clearance from Ground Control. This is normally done via VHF/UHF radio, but there may be special cases where other processes are used. Most aircraft and airside vehicles have radios. Aircraft or vehicles without radios must respond to ATC instructions via aviation light signals or else be led by vehicles with radios. People working on the airport surface normally have a communications link through which they can communicate with Ground Control, commonly either by handheld radio or even cell phone. Ground Control is vital to the smooth operation of the airport, because this position impacts the sequencing of departure aircraft, affecting the safety and efficiency of the airport's operation.
Some busier airports have Surface Movement Radar (SMR), such as, ASDE-3, AMASS or ASDE-X, designed to display aircraft and vehicles on the ground. These are used by Ground Control as an additional tool to control ground traffic, particularly at night or in poor visibility. There are a wide range of capabilities on these systems as they are being modernized. Older systems will display a map of the airport and the target. Newer systems include the capability to display higher quality mapping, radar target, data blocks, and safety alerts, and to interface with other systems such as digital flight strips.
Local control or air control
Local Control (known to pilots as "Tower" or "Tower Control") is responsible for the active runway surfaces. Local Control clears aircraft for takeoff or landing, ensuring that prescribed runway separation will exist at all times. If Local Control detects any unsafe condition, a landing aircraft may be told to "go-around" and be re-sequenced into the landing pattern by the approach or terminal area controller.
Within the ATCT, a highly disciplined communications process between Local Control and Ground Control is an absolute necessity. Ground Control must request and gain approval from Local Control to cross any active runway with any aircraft or vehicle. Likewise, Local Control must ensure that Ground Control is aware of any operations that will impact the taxiways, and work with the approach radar controllers to create "holes" or "gaps" in the arrival traffic to allow taxiing traffic to cross runways and to allow departing aircraft to take off. Crew Resource Management (CRM) procedures are often used to ensure this communication process is efficient and clear, although this is not as prevalent as CRM for pilots.
Flight data / clearance delivery
Clearance Delivery is the position that issues route clearances to aircraft, typically before they commence taxiing. These contain details of the route that the aircraft is expected to fly after departure. Clearance Delivery or, at busy airports, the Traffic Management Coordinator (TMC) will, if necessary, coordinate with the en route center and national command center or flow control to obtain releases for aircraft. Often, however, such releases are given automatically or are controlled by local agreements allowing "free-flow" departures. When weather or extremely high demand for a certain airport or airspace becomes a factor, there may be ground "stops" (or "slot delays") or re-routes may be necessary to ensure the system does not get overloaded. The primary responsibility of Clearance Delivery is to ensure that the aircraft have the proper route and slot time. This information is also coordinated with the en route center and Ground Control in order to ensure that the aircraft reaches the runway in time to meet the slot time provided by the command center. At some airports, Clearance Delivery also plans aircraft pushbacks and engine starts, in which case it is known as the Ground Movement Planner (GMP): this position is particularly important at heavily congested airports to prevent taxiway and apron gridlock.
Flight Data (which is routinely combined with Clearance Delivery) is the position that is responsible for ensuring that both controllers and pilots have the most current information: pertinent weather changes, outages, airport ground delays/ground stops, runway closures, etc. Flight Data may inform the pilots using a recorded continuous loop on a specific frequency known as the Automatic Terminal Information Service (ATIS).
Approach and terminal control
Many airports have a radar control facility that is associated with the airport. In most countries, this is referred to as Terminal Control; in the U.S., it is referred to as a TRACON (Terminal Radar Approach Control.) While every airport varies, terminal controllers usually handle traffic in a 30-to-50-nautical-mile (56 to 93 km) radius from the airport. Where there are many busy airports close together, one consolidated TRACON may service all the airports. The airspace boundaries and altitudes assigned to a TRACON, which vary widely from airport to airport, are based on factors such as traffic flows, neighboring airports and terrain. A large and complex example is the London Terminal Control Centre which controls traffic for five main London airports up to 20,000 feet (6,100 m) and out to 100 nautical miles (190 km).
Terminal controllers are responsible for providing all ATC services within their airspace. Traffic flow is broadly divided into departures, arrivals, and overflights. As aircraft move in and out of the terminal airspace, they are handed off to the next appropriate control facility (a control tower, an en-route control facility, or a bordering terminal or approach control). Terminal control is responsible for ensuring that aircraft are at an appropriate altitude when they are handed off, and that aircraft arrive at a suitable rate for landing.
Not all airports have a radar approach or terminal control available. In this case, the en-route center or a neighboring terminal or approach control may co-ordinate directly with the tower on the airport and vector inbound aircraft to a position from where they can land visually. At some of these airports, the tower may provide a non-radar procedural approach service to arriving aircraft handed over from a radar unit before they are visual to land. Some units also have a dedicated approach unit which can provide the procedural approach service either all the time or for any periods of radar outage for any reason.
En-route, center, or area control
ATC provides services to aircraft in flight between airports as well. Pilots fly under one of two sets of rules for separation: Visual Flight Rules (VFR) or Instrument Flight Rules (IFR). Air traffic controllers have different responsibilities to aircraft operating under the different sets of rules. While IFR flights are under positive control, in the US VFR pilots can request flight following, which provides traffic advisory services on a time permitting basis and may also provide assistance in avoiding areas of weather and flight restrictions. In the UK, a pilot can request for "Basic Service", which is similar to flight following.
En-route air traffic controllers issue clearances and instructions for airborne aircraft, and pilots are required to comply with these instructions. En-route controllers also provide air traffic control services to many smaller airports around the country, including clearance off of the ground and clearance for approach to an airport. Controllers adhere to a set of separation standards that define the minimum distance allowed between aircraft. These distances vary depending on the equipment and procedures used in providing ATC services.
En-route air traffic controllers work in facilities called Area Control Centers, each of which is commonly referred to as a "Center". The United States uses the equivalent term Air Route Traffic Control Center (ARTCC). Each center is responsible for many thousands of square miles of airspace (known as a Flight Information Region) and for the airports within that airspace. Centers control IFR aircraft from the time they depart from an airport or terminal area's airspace to the time they arrive at another airport or terminal area's airspace. Centers may also "pick up" VFR aircraft that are already airborne and integrate them into the IFR system. These aircraft must, however, remain VFR until the Center provides a clearance.
Center controllers are responsible for climbing the aircraft to their requested altitude while, at the same time, ensuring that the aircraft is properly separated from all other aircraft in the immediate area. Additionally, the aircraft must be placed in a flow consistent with the aircraft's route of flight. This effort is complicated by crossing traffic, severe weather, special missions that require large airspace allocations, and traffic density. When the aircraft approaches its destination, the center is responsible for meeting altitude restrictions by specific points, as well as providing many destination airports with a traffic flow, which prohibits all of the arrivals being "bunched together". These "flow restrictions" often begin in the middle of the route, as controllers will position aircraft landing in the same destination so that when the aircraft are close to their destination they are sequenced.
As an aircraft reaches the boundary of a Center's control area it is "handed off" or "handed over" to the next Area Control Center. In some cases this "hand-off" process involves a transfer of identification and details between controllers so that air traffic control services can be provided in a seamless manner; in other cases local agreements may allow "silent handovers" such that the receiving center does not require any co-ordination if traffic is presented in an agreed manner. After the hand-off, the aircraft is given a frequency change and begins talking to the next controller. This process continues until the aircraft is handed off to a terminal controller ("approach").
Since centers control a large airspace area, they will typically use long range radar that has the capability, at higher altitudes, to see aircraft within 200 nautical miles (370 km) of the radar antenna. They may also use TRACON radar data to control when it provides a better "picture" of the traffic or when it can fill in a portion of the area not covered by the long range radar.
In the U.S. system, at higher altitudes, over 90% of the U.S. airspace is covered by radar and often by multiple radar systems; however, coverage may be inconsistent at lower altitudes used by unpressurized aircraft due to high terrain or distance from radar facilities. A center may require numerous radar systems to cover the airspace assigned to them, and may also rely on pilot position reports from aircraft flying below the floor of radar coverage. This results in a large amount of data being available to the controller. To address this, automation systems have been designed that consolidate the radar data for the controller. This consolidation includes eliminating duplicate radar returns, ensuring the best radar for each geographical area is providing the data, and displaying the data in an effective format.
Centers also exercise control over traffic travelling over the world's ocean areas. These areas are also FIRs. Because there are no radar systems available for oceanic control, oceanic controllers provide ATC services using procedural control. These procedures use aircraft position reports, time, altitude, distance, and speed to ensure separation. Controllers record information on flight progress strips and in specially developed oceanic computer systems as aircraft report positions. This process requires that aircraft be separated by greater distances, which reduces the overall capacity for any given route. See for example the North Atlantic Track system.
Some Air Navigation Service Providers (e.g. Airservices Australia, The Federal Aviation Administration, NAV CANADA, etc.) have implemented Automatic Dependent Surveillance - Broadcast (ADS-B) as part of their surveillance capability. This new technology reverses the radar concept. Instead of radar "finding" a target by interrogating the transponder, the ADS-equipped aircraft sends a position report as determined by the navigation equipment on board the aircraft. Normally, ADS operates in the "contract" mode where the aircraft reports a position, automatically or initiated by the pilot, based on a predetermined time interval. It is also possible for controllers to request more frequent reports to more quickly establish aircraft position for specific reasons. However, since the cost for each report is charged by the ADS service providers to the company operating the aircraft, more frequent reports are not commonly requested except in emergency situations. ADS is significant because it can be used where it is not possible to locate the infrastructure for a radar system (e.g. over water). Computerized radar displays are now being designed to accept ADS inputs as part of the display. This technology is currently used in portions of the North Atlantic and the Pacific by a variety of states who share responsibility for the control of this airspace.
Precision approach radars are commonly used by military controllers of airforces of several countries, to assist the Pilot in final phases of landing in places where Instrument Landing System and other sophisticated air borne equipements are unavailable to assist the pilots in marginal or near zero visibility conditions. This procedure is also called Talkdowns.
A Radar Archive System (RAS) keeps an electronic record of all radar information, preserving it for a few weeks. This information can be useful for search and rescue. When an aircraft has 'disappeared' from radar screens, a controller can review the last radar returns from the aircraft to determine its likely position. For example, see this crash report. RAS is also useful to technicians who are maintaining radar systems.
Flight traffic mapping
The mapping of flights in real-time is based on the air traffic control system. In 1991, data on the location of aircraft was made available by the Federal Aviation Administration to the airline industry. The National Business Aviation Association (NBAA), the General Aviation Manufacturers Association, the Aircraft Owners & Pilots Association, the Helicopter Association International, and the National Air Transportation Association petitioned the FAA to make ASDI information available on a "need-to-know" basis. Subsequently, NBAA advocated the broad-scale dissemination of air traffic data. The Aircraft Situational Display to Industry (ASDI) system now conveys up-to-date flight information to the airline industry and the public. Some companies that distribute ASDI information are FlightExplorer, FlightView, and FlyteComm. Each company maintains a website that provides free updated information to the public on flight status. Stand-alone programs are also available for displaying the geographic location of airborne IFR (Instrument Flight Rules) air traffic anywhere in the FAA air traffic system. Positions are reported for both commercial and general aviation traffic. The programs can overlay air traffic with a wide selection of maps such as, geo-political boundaries, air traffic control center boundaries, high altitude jet routes, satellite cloud and radar imagery.
- For more information see Air traffic flow management.
The day-to-day problems faced by the air traffic control system are primarily related to the volume of air traffic demand placed on the system and weather. Several factors dictate the amount of traffic that can land at an airport in a given amount of time. Each landing aircraft must touch down, slow, and exit the runway before the next crosses the approach end of the runway. This process requires at least one and up to four minutes for each aircraft. Allowing for departures between arrivals, each runway can thus handle about 30 arrivals per hour. A large airport with two arrival runways can handle about 60 arrivals per hour in good weather. Problems begin when airlines schedule more arrivals into an airport than can be physically handled, or when delays elsewhere cause groups of aircraft that would otherwise be separated in time to arrive simultaneously. Aircraft must then be delayed in the air by holding over specified locations until they may be safely sequenced to the runway. Up until the 1990s, holding, which has significant environmental and cost implications, was a routine occurrence at many airports. Advances in computers now allow the sequencing of planes hours in advance. Thus, planes may be delayed before they even take off (by being given a "slot"), or may reduce speed in flight and proceed more slowly thus significantly reducing the amount of holding.
Air traffic control errors occur when the separation (either vertical or horizontal) between airborne aircraft falls below the minimum prescribed separation set (for the domestic United States) by the US Federal Aviation Administration. Separation minimums for terminal control areas (TCAs) around airports are lower than en-route standards. Errors generally occur during periods following times of intense activity, when controllers tend to relax and overlook the presence of traffic and conditions that lead to loss of minimum separation. Paradoxically, current high precision cruising altitude rules increase the risk of collision between 10 and 33 times over more sloppy alternatives when air traffic control errors occur.
Beyond runway capacity issues, weather is a major factor in traffic capacity. Rain, ice or snow on the runway cause landing aircraft to take longer to slow and exit, thus reducing the safe arrival rate and requiring more space between landing aircraft. Fog also requires a decrease in the landing rate. These, in turn, increase airborne delay for holding aircraft. If more aircraft are scheduled than can be safely and efficiently held in the air, a ground delay program may be established, delaying aircraft on the ground before departure due to conditions at the arrival airport.
In Area Control Centers, a major weather problem is thunderstorms, which present a variety of hazards to aircraft. Aircraft will deviate around storms, reducing the capacity of the en-route system by requiring more space per aircraft, or causing congestion as many aircraft try to move through a single hole in a line of thunderstorms. Occasionally weather considerations cause delays to aircraft prior to their departure as routes are closed by thunderstorms.
Much money has been spent on creating software to streamline this process. However, at some ACCs, air traffic controllers still record data for each flight on strips of paper and personally coordinate their paths. In newer sites, these flight progress strips have been replaced by electronic data presented on computer screens. As new equipment is brought in, more and more sites are upgrading away from paper flight strips.
A prerequisite to safe air traffic separation is the assignment and use of distinctive call signs. These are permanently allocated by ICAO (pronounced "ai-kay-oh") on request usually to scheduled flights and some air forces for military flights. They are written callsigns with 3-letter combination like KLM, AAL, SWA, BAW, VLG followed by the flight number, like AAL872, VLG1011. As such they appear on flight plans and ATC radar labels. There are also the audio or Radio-telephony callsigns used on the radio contact between pilots and Air Traffic Control not always identical with the written ones. For example BAW symbolises British Airways but on the radio you will only hear the word Speedbird followed by an alpha-numeric code instead. By default, the callsign for any other flight is the registration number (tail number) of the aircraft, such as "N12345", "C-GABC" or "EC-IZD". The term tail number is because a registration number is usually painted somewhere on the tail of a plane, yet this is not a rule. Registration numbers may appear on the engines, anywhere on the fuselage, and often on the wings. The short Radio-telephony callsigns for these tail numbers is the last 3 letters only like ABC spoken Alpha-Bravo-Charlie for C-GABC or the last 3 numbers like 345 spoken as TREE-FORE-FIFE for N12345. In the United States the abbreviation of callsigns is required to be a prefix (such as aircraft type, aircraft manufacturer, or first letter of registration) followed by the last three characters of the callsign. This abbreviation is only allowed after communications has been established in each sector.
The flight number part is decided by the aircraft operator. In this arrangement, an identical call sign might well be used for the same scheduled journey each day it is operated, even if the departure time varies a little across different days of the week. The call sign of the return flight often differs only by the final digit from the outbound flight. Generally, airline flight numbers are even if eastbound, and odd if westbound. In order to reduce the possibility of two callsigns on one frequency at any time sounding too similar, a number of airlines, particularly in Europe, have started using alphanumeric callsigns that are not based on flight numbers. For example DLH23LG, spoken as lufthansa-two-tree-lima-golf. Additionally it is the right of the air traffic controller to change the 'audio' callsign for the period the flight is in his sector if there is a risk of confusion, usually choosing the tail number instead.
Before around 1980 International Air Transport Association (IATA) and ICAO were using the same 2-letter callsigns. Due to the larger number of new airlines after deregulation ICAO established the 3-letter callsigns as mentioned above. The IATA callsigns are currently used in aerodromes on the announcement tables but never used any longer in Air Traffic Control. For example, AA is the IATA callsign for American Airlines — ATC equivalent AAL. Other examples include LY/ELY for El Al, DL/DAL for Delta Air Lines, VY/VLG for Vueling Airlines, etc.
Many technologies are used in air traffic control systems. Primary and secondary radar are used to enhance a controller's situation awareness within his assigned airspace — all types of aircraft send back primary echoes of varying sizes to controllers' screens as radar energy is bounced off their skins, and transponder-equipped aircraft reply to secondary radar interrogations by giving an ID (Mode A), an altitude (Mode C) and/or a unique callsign (Mode S). Certain types of weather may also register on the radar screen.
These inputs, added to data from other radars, are correlated to build the air situation. Some basic processing occurs on the radar tracks, such as calculating ground speed and magnetic headings.
Usually, a Flight Data Processing System manages all the flight plan related data, incorporating - in a low or high degree - the information of the track once the correlation between them (flight plan and track) is established. All this information is distributed to modern operational display systems, making it available to controllers.
The FAA has spent over USD$3 billion on software, but a fully automated system is still over the horizon. In 2002 the UK brought a new area control centre into service at Swanwick, in Hampshire, relieving a busy suburban centre at West Drayton in Middlesex, north of London Heathrow Airport. Software from Lockheed-Martin predominates at Swanwick. However, Swanwick was initially troubled by software and communications problems causing delays and occasional shutdowns.
Some tools are available in different domains to help the controller further:
- Flight Data Processing Systems: this is the system (usually one per Center) that processes all the information related to the Flight (the Flight Plan), typically in the time horizon from Gate to gate (airport departure/arrival gates). It uses such processed information to invoke other Flight Plan related tools (such as e.g. MTCD), and distributes such processed information to all the stakeholders (Air Traffic Controllers, collateral Centers, Airports, etc.).
- Short Term Conflict Alert (STCA) that checks possible conflicting trajectories in a time horizon of about 2 or 3 minutes (or even less in approach context - 35 seconds in the French Roissy & Orly approach centres ) and alerts the controller prior to the loss of separation. The algorithms used may also provide in some systems a possible vectoring solution, that is, the manner in which to turn, descend, or climb the aircraft in order to avoid infringing the minimum safety distance or altitude clearance.
- Minimum Safe Altitude Warning (MSAW): a tool that alerts the controller if an aircraft appears to be flying too low to the ground or will impact terrain based on its current altitude and heading.
- System Coordination (SYSCO) to enable controller to negotiate the release of flights from one sector to another.
- Area Penetration Warning (APW) to inform a controller that a flight will penetrate a restricted area.
- Arrival and Departure Manager to help sequence the takeoff and landing of aircraft.
- The Departure Manager (DMAN): A system aid for the ATC at airports, that calculates a planned departure flow with the goal to maintain an optimal throughput at the runway, reduce queuing at holding point and distribute the information to various stakeholders at the airport (i.e. the airline, ground handling and Air Traffic Control (ATC)).
- The Arrival Manager (AMAN): A system aid for the ATC at airports, that calculates a planned Arrival flow with the goal to maintain an optimal throughput at the runway, reduce arrival queuing and distribute the information to various stakeholders.
- passive Final Approach Spacing Tool (pFAST), a CTAS tool, provides runway assignment and sequence number advisories to terminal controllers to improve the arrival rate at congested airports. pFAST was deployed and operational at five US TRACONs before being cancelled. NASA research included an Active FAST capability that also provided vector and speed advisories to implement the runway and sequence advisories.
- Converging Runway Display Aid (CRDA) enables Approach controllers to run two final approaches that intersect and make sure that go arounds are minimized
- Center TRACON Automation System (CTAS) is a suite of human centered decision support tools developed by NASA Ames Research Center. Several of the CTAS tools have been field tested and transitioned to the FAA for operational evaluation and use. Some of the CTAS tools are: Traffic Management Advisor (TMA), passive Final Approach Spacing Tool (pFAST), Collaborative Arrival Planning (CAP), Direct-To (D2), En Route Descent Advisor (EDA) and Multi Center TMA. The software is running on linux.
- Traffic Management Advisor (TMA), a CTAS tool, is an en route decision support tool that automates time based metering solutions to provide an upper limit of aircraft to a TRACON from the Center over a set period of time. Schedules are determined that will not exceed the specified arrival rate and controllers use the scheduled times to provide the appropriate delay to arrivals while in the en route domain. This results in an overall reduction in en route delays and also moves the delays to more efficient airspace (higher altitudes) than occur if holding near the TRACON boundary is required to not overload the TRACON controllers. TMA is operational at most en route air route traffic control centers (ARTCCs) and continues to be enhanced to address more complex traffic situations (e.g. Adjacent Center Metering (ACM) and En Route Departure Capability (EDC))
- MTCD & URET
- In the US, User Request Evaluation Tool (URET) takes paper strips out of the equation for En Route controllers at ARTCCs by providing a display that shows all aircraft that are either in or currently routed into the sector.
- In Europe, several MTCD tools are available: iFACTS (NATS), VAFORIT (DFS), New FDPS (MASUAC). The SESAR Programme should soon launch new MTCD concepts.
- URET and MTCD provide conflict advisories up to 30 minutes in advance and have a suite of assistance tools that assist in evaluating resolution options and pilot requests.
- Mode S: provides a data downlink of flight parameters via Secondary Surveillance Radars allowing radar processing systems and therefore controllers to see various data on a flight, including airframe unique id (24-bits encoded), indicated airspeed and flight director selected level, amongst others.
- CPDLC: Controller Pilot Data Link Communications — allows digital messages to be sent between controllers and pilots, avoiding the need to use radiotelephony. It is especially useful in areas where difficult-to-use HF radiotelephony was previously used for communication with aircraft, e.g. oceans. This is currently in use in various parts of the world including the Atlantic and Pacific oceans.
- ADS-B: Automatic Dependent Surveillance Broadcast — provides a data downlink of various flight parameters to air traffic control systems via the Transponder (1090 MHz) and reception of those data by other aircraft in the vicinity. The most important is the aircraft's latitude, longitude and level: such data can be utilized to create a radar-like display of aircraft for controllers and thus allows a form of pseudo-radar control to be done in areas where the installation of radar is either prohibitive on the grounds of low traffic levels, or technically not feasible (e.g. oceans). This is currently in use in Australia, Canada and parts of the Pacific Ocean and Alaska.
- The Electronic Flight Strip system (e-strip): A system of electronic flight strips replacing the old paper strips is being used by several Service Providers, such as NAV CANADA, MASUAC, DFS, being produced by several industries, such as Indra Sistemas, Thales Group, Frequentis, Avibit, SAAB etc. E-strips allows controllers to manage electronic flight data online without Paper Strips, reducing the need for manual functions.
- Screen Content Recording: Hardware or software based recording function which is part of most modern Automation System and that captures the screen content shown to of the ATCO. Such recordings are used for a later replay together with audio recording for investigations and post event analysis.
- Communication Navigation Surveillance / Air Traffic Management (CNS/ATM) systems are communications, navigation, and surveillance systems, employing digital technologies, including satellite systems together with various levels of automation, applied in support of a seamless global air traffic management system.
The regulatory function remains the responsibility of the State and can be exercised by Government and/or independent Safety, Airspace and Economic Regulators depending on the national institutional arrangements. Often you will see a division between the Civil Aviation Authority (CAA) (the Regulator) and the ANSP (the Air Navigation Service Provider).
An Air Navigation Service Provider — The air navigation service provider is the authority directly responsible for providing both visual and non-visual aids to navigation within a specific airspace in compliance with, but not limited to, International Civil Aviation Organization (ICAO) Annexes 2, 6, 10 and 11; ICAO Documents 4444 and 9426; and, other international, multi-national, and national policy, agreements or regulations.
An Air Traffic Service Provider is the relevant authority designated by the State responsible for providing air traffic services in the airspace concerned. Air traffic services is generic and can mean: flight information service, alerting service, air traffic advisory service, air traffic control service (area control service, approach control service or aerodrome control service), etc.
Both ANSPs and ATSPs can be public, private or corporatized organisations and examples of the different legal models exist throughout the world today. The world's ANSPs are united in and represented by the Civil Air Navigation Services Organisation (CANSO) based at Amsterdam Airport Schiphol in the Netherlands.
In the United States, the Federal Aviation Administration (FAA) provides this service to all aircraft in the National Airspace System (NAS). With the exception of facilities operated by the Department of Defense (DoD), the FAA is responsible for all aspects of U.S.A Air Traffic Control including hiring and training controllers, although there are contract towers located in many parts of the country. A contract tower is an Airport Traffic Control Tower (ATCT) that performs the same function as an FAA-run ATCT but is staffed by employees of a private company (Martin State Airport in Maryland is an example). DoD facilities are generally staffed by military personnel and operate separately but concurrently with FAA facilities, under similar rules and procedures. In Canada, Air Traffic Control is provided by NAV CANADA, a private, non-share capital corporation that operates Canada's civil air navigation service.
- Albania - Agjencia Nacionale e Trafikut Ajror
- Armenia - Armenian Air Traffic Services (ARMATS)
- Austria - Austro Control
- Australia - Airservices Australia (State Owned Corporation) and Royal Australian Air Force.
- Belarus - Republican Unitary Enterprise "Белаэронавигация (Belarusian Air Navigation)"
- Belgium - Belgocontrol
- Brazil - Departmento de Controle de Tráfego Aéreo (Military Authority) and ANAC - Agência Nacional de Aviação Civil
- Bulgaria - Air Traffic Services Authority
- Canada - NAV CANADA - formerly provided by Transport Canada and Canadian Forces
- Central America - Corporación Centroamericana de Servicios de Navegación Aérea
- Colombia - (UAEAC) Aeronáutica Civil Colombiana
- Croatia - Hrvatska kontrola zračne plovidbe (Croatia Control Ltd.)
- Cuba - IACC (Instituto de Aeronáutica Civil de Cuba)
- Czech Republic - Řízení letového provozu ČR
- Denmark - Naviair (Danish ATC)
- Dominican Republic - IDAC (Instituto Dominicano de Aviación Civil) "Dominican Institute of Civil Aviation"
- Estonia - Estonian Air Navigation Services
- Europe - Eurocontrol - (European Organisation for the Safety of Air Navigation)
- Finland - Finavia
- France - Direction Générale de l'Aviation Civile (DGAC) : Direction des Services de la Navigation Aérienne (DSNA) (Government body)
- Georgia - SAKAERONAVIGATSIA, Ltd. (Georgian Air Navigation)
- Germany - Deutsche Flugsicherung (German ATC - State-owned company)
- Greece - Hellenic Civil Aviation Authority (HCAA)
- Hong Kong - CAD (Civil Aviation Department)
- Hungary - HungaroControl Magyar Légiforgalmi Szolgálat Zrt. (HungaroControl Hungarian Air Navigation Services Pte. Ltd. Co.)
- Iceland - ISAVIA
- Indonesia - Angkasa Pura II
- Ireland - IAA (Irish Aviation Authority)
- India - Airports Authority of India (AAI) (under Ministry of Civil Aviation, Government Of India)
- Italy - ENAV (Italian ATC)(Ente Nazionale Assistenza al Volo - Italian ATC)
- Jamaica - JCAA (Jamaica Civil Aviation Authority)
- Latvia - LGS (Latvian ATC)
- Lithuania - ANS (Lithuanian ATC)
- Luxembourg - Luxembourg ATC
- Macedonia - DGCA (Macedonian ATC)
- Malaysia - DCA-Department of Civil Aviation
- Malta - Malta Air Traffic Services Ltd
- Mexico - Servicios a la Navegación en el Espacio Aéreo Mexicano
- Nepal - Civil Aviation Authority of Nepal
- Netherlands - Luchtverkeersleiding Nederland (LVNL) (Dutch ATC) http://www.eurocontrol.nl Eurocontrol (European area control ATC)
- New Zealand - Airways New Zealand (State Owned Enterprise)
- Norway - Avinor (State-owned private company)
- Pakistan - Civil Aviation Authority (under Government of Pakistan)
- Peru - Centro de Instrucción de Aviación Civil CIAC Civil Aviation Training Center
- Philippines - Civil Aviation Authority of the Philippines (CAAP) (under the Philippine Government)
- Poland - PANSA - Polish Air Navigation Services Agency
- Portugal - NAV - NAV (Portuguese ATC)
- Romania - Romanian Air Traffic Services Administration - (ROMATSA)
- Russia - Federal State Unitary Enterprise "State ATM Corporation" - (State ATM Corporation)
- Saudi Arabia - General Authority of Civil Aviation (GACA)
- Singapore - CAAS (Civil Aviation Authority of Singapore)
- Serbia - Serbia and Montenegro Air Traffic Services Agency Ltd. (SMATSA)
- Slovakia - Letové prevádzkové služby Slovenskej republiky
- Slovenia - Slovenia Control
- South Africa - Air Traffic and Navigation Services. (ATNS)
- Spain - AENA (Spanish ATC and Airports)
- Sweden - The LFV Group (Swedish ATC)
- Switzerland - Skyguide
- Taiwan - ANWS Civil Aeronautical Administration
- Thailand - AEROTHAI (Aeronautical Radio of Thailand)
- Trinidad and Tobago - TTCAA (Trinidad and Tobago Civil Aviation Authority)
- Turkey - DGCA (Turkish Directorate General of Civil Aviation)
- United Arab Emirates - General Civil Aviation Authority (GCAA)
- United Kingdom - National Air Traffic Services (49% State Owned Public-Private Partnership)
- United States - Federal Aviation Administration (Government Body)
- Ukraine - Ukrainian State Air Traffic Service Enterprise (UkSATSE)
- Venezuela - INAC (Instituto Nacional de Aviación Civil)
In the United States, some alterations to traffic control procedures are being examined.
- The Next Generation Air Transportation System examines how to overhaul the United States national airspace system.
- Free flight is a developing air traffic control method that uses no centralized control (e.g. air traffic controllers). Instead, parts of airspace are reserved dynamically and automatically in a distributed way using computer communication to ensure the required separation between aircraft.
In Europe, the SESAR (Single European Sky ATM Research) Programme plans to develop new methods, new technologies, new procedures, new systems to accommodate future (2020 and beyond) Air Traffic Needs.
Many countries have also privatized or corporatized their air navigation service providers.
Change in regulation in admittance for possible A.T.C.'s regarding their eye-refraction and correction thereof by technology has been proposed.
ATC regulations in the United States
FAA Control Tower Operators (CTO)/Air Traffic Controllers use FAA Order 7110.65T as the authority for all procedures regarding air traffic. For more information regarding Air Traffic Control rules and regulations, refer the Federal Aviation Administration's (FAA) website.
- Air safety
- Air traffic controller
- Area Control Center (ACC)
- Australian Air Traffic Control
- Automatic dependent surveillance-broadcast (ADS-B)
- Aviation light signals
- Aviation Supplies and Academics, Inc.
- Bashkirian Airlines Flight 2937 & DHL Flight 611 mid-air collision
- Boston Virtual ATC (BVA)
- Civil Air Navigation Services Organisation
- European Operational Concept Validation Methodology (E-OCVM)
- Flight level (FL)
- Forward Air Controller
- Flight Information Service Officer
- Flight planning
- Flight tracking
- Flight progress strip
- Flight traffic mapping
- GIANT KILLER
- Global Air Traffic Management
- IFATCA (International Federation of ATC Associations)
- Professional Air Traffic Controllers Organization
- Remote and Virtual Tower
- Tenerife disaster, (TFN)
- Terminal Control Center
- Tower en route control (TEC)
- Virtual Air Traffic Simulation Network (VATSIM)
- Zagreb mid-air collision
- ^ "FAA 7110.65 2-1-1". http://www.faa.gov/air_traffic/publications/atpubs/ATC/atc0201.html.
- ^ a b "IDAO FAQ". http://www.icao.int/icao/en/trivia/peltrgFAQ.htm#23. Retrieved 2009-03-03.
- ^ "crash report". tsb.gc.ca. http://www.tsb.gc.ca/eng/rapports-reports/aviation/1996/a96a0207/a96a0207.asp. retrieved on Aug 21, 2010
- ^ Breitler, Alan and Kirk, Kevin (Sep 1996), Effects of Sector Complexity and Controller Experience on Probability of Operational Errors in Air Route Traffic Control Centers, Center for Naval Analyses Document (IPR 95-0092)
- ^ DGAC/Aviation Civile Magazine
- ^ "Technical Sessions". usenix.org. http://www.usenix.org/events/usenix02/tech/techthurs.html. Retrieved 5 December 2010.
- ^ a b SESAR
- ^ Air Traffic Control Recording
- ^ http://www.icao.int/icao/en/ro/rio/execsum.pdf
- ^ Free Flight
- ^ McDougall, Glen and Roberts, Alasdair S (August 15, 2007). Commercializing Air Traffic Control: Have the Reforms Worked?. Canadian Public Administration. p. Vol. 51, No. 1, pp. 45–69, 2009. SSRN 1317450.
- ^ "Air Traffic Plans and Publications". FAA. http://www.faa.gov/atpubs. Retrieved 5 December 2010.
- Air Traffic Control Career Prep
- Civil Air Navigation Services Organisation (CANSO)
- The ATC Network - The online portal for ATC professionals
- ATC-SIM - A web-based air traffic control simulator
- International Federation of Air Traffic Safety Electronics Associations
- atcosonline - A community based site for air traffic controllers from around the world
- SKYbrary: The single point of reference in the network of aviation safety knowledge
- Listen to ATC radio 24/7 Live Aviation Radio
- Listen to GERMAN ATC (NRW) radio 24/7 Live Aviation Radio
- Map of airborne flights controlled by US ATC
- OpsRoom - Worldwide FIRs, Live ATC/airspace data
- Audio of interview with US terminal area controller
- Air traffic in 24 hours
Air traffic control Enroute Terminal Ground Commercial air travel Airlines Alliances Trade groups Airliner Airport Aircrew Customs / immigration Environmental impact
Impact on climate and environment · Hypermobility
Luggage Safety Ticketing
Airline Reservations System · Airline ticket · Airline timetable · Bereavement flight · Boarding pass · Codeshare agreement · Continent pass · Electronic ticket · Flight delay · Flight cancellation · Frequent-flyer program · Government contract flight · Open-jaw ticket · Red-eye flight · Round-the-world ticket · Standby · Travel agency · Travel website · Warsaw Convention
Wikimedia Foundation. 2010.
Look at other dictionaries:
Air Traffic Control — (ATC) bezeichnet allgemein im englischen Sprachraum: die Flugverkehrskontrolle. speziell als Gerätesystem: das Sekundärradar zur Luftraumüberwachung. Air Traffic Control Officer (ATCO) bezeichnet den verantwortlichen Mitarbeiter eines… … Deutsch Wikipedia
air-traffic control — air traffic controller. /air traf ik/ a government service that facilitates the safe and orderly movement of aircraft within and between airports by receiving and processing data from radar and devices that monitor local weather conditions and by … Useful english dictionary
air traffic control — UK US noun [U] (ABBREVIATION ATC) TRANSPORT ► the activity of managing aircraft from the ground as they take off, fly, and land, or the people who do this: »an air traffic control centre/service/system air traffic controller noun [C] … Financial and business terms
air traffic control — a coordinated system designed to manage air traffic around airports safely, along flight routes, etc. air traffic controller n. * * * … Universalium
air traffic control — a coordinated system designed to manage air traffic around airports safely, along flight routes, etc. air traffic controller n … English World dictionary
air traffic control — ► NOUN ▪ the ground based personnel and equipment concerned with controlling and monitoring air traffic within a particular area … English terms dictionary
air traffic control — 1) N UNCOUNT: oft N n Air traffic control is the activity of organizing the routes that aircraft should follow, and telling pilots by radio which routes they should take. ...the nation s overburdened air traffic control system. 2) N UNCOUNT COLL… … English dictionary
air-traffic control — air traffic controller. /air traf ik/ a government service that facilitates the safe and orderly movement of aircraft within and between airports by receiving and processing data from radar and devices that monitor local weather conditions and by … Universalium
air traffic control — air traffic con trol noun uncount the activity of organizing the movement of airplanes a. the people who work as air traffic controllers … Usage of the words and phrases in modern English
air traffic control — air traffic con.trol n [U] 1.) the process or job of giving instructions to pilots by radio 2.) the people whose job is to do this … Dictionary of contemporary English