Can opener


Can opener
A modern opener with a combination of a rotating cutting wheel and a serrated wheel

A can opener (also known as a tin opener) is a device used to open metal cans. Although preservation of food using tin cans had been practiced since at least 1772 in the Netherlands, the first can openers were patented only in 1855 in England and in 1858 in the United States. Those openers were basically variations of a knife, and the 1855 design continues to be produced. The first opener employing the now familiar sharp rotating wheel, which runs around the can's rim cutting the lid, was invented in 1870 but was difficult to operate. A breakthrough came in 1925 when a second, serrated wheel was added to hold the cutting wheel on the rim of the can. This easy to use design has become one of the most popular can opener models.

Around the time of World War II, several can openers were developed for military use, such as the American P-38 and P-51. These featured a robust and simple design where a folding knife and absence of a handle significantly reduced the opener size. Electric can openers were introduced in the late 1950s and met with success. The development of new can opener types continues with the recent addition of a side-cutting model.

Contents

Invention of cans

Food preserved in tin cans was in use by the Dutch Navy from at least 1772.[1] Before 1800, there was already a small industry of canned salmon in the Netherlands. Freshly caught salmon were cleaned, boiled in brine, smoked and placed in tin-plated iron boxes. This canned salmon was known outside the Netherlands, and in 1797 a British company supplied one of their clients with 13 cans. Preservation of food in tin cans was patented by Peter Durand in 1810. The patent was acquired in 1812 by Bryan Donkin who had later set up the world’s first canning factory in London in 1813. By 1820, canned food was a recognized article in Britain and France and by 1822 in the United States.[1] The first cans were robust containers, which weighed more than the food they contained and required ingenuity to open, using whatever tools available. The instruction on those cans read "Cut round the top near the outer edge with a chisel and hammer."[2][3]

First, lever-type can openers

Lever-type can opener design of 1855 by Robert Yeates
Lever-type can opener design of 1858 by Ezra Warner
Bull-head lever-type can opener of 1865

Dedicated can openers appeared in the 1850s and were of a primitive claw-shaped or "lever-type" design. In 1855, Robert Yeates, a cutlery and surgical instrument maker of Trafalgar Place West, Hackney Road, Middlesex, UK, devised the first claw-ended can opener with a hand-operated tool that haggled its way around the top of metal cans.[4]

In 1858, another lever-type opener of a more complex shape was patented in the US by Ezra Warner of Waterbury, Connecticut. It consisted of a sharp sickle, which was pushed into the can and sawed around its edge. A guard kept the sickle from penetrating too far into the can. The opener consisted of several parts which could be replaced if worn out, especially the sickle.[5] This opener was adopted by the US Army during the American Civil War (1861–1865); however, its unprotected knife-like sickle was too dangerous for domestic use. A home-use opener named the "Bull's head opener" was designed in 1865 and was supplied with cans of pickled beef named "Bully beef". The opener was made of cast iron and had a very similar construction to the Yeates opener, but featured a more artistic shape and was the first move towards improving the look of the can opener. The bull-headed design was produced until the 1930s and was also offered with a fish-head shape.[2]

Rotating wheel openers

The Bunker opener
Rotary can opener of 1870 by William Lyman
Double-wheel design of 1925

The first rotating wheel can opener was patented in July 1870 by William Lyman of Meriden, Connecticut, US[6] and produced by the firm Baumgarten in the 1890s. The can was to be pierced in its center with the sharp metal rod of the opener. Then the length of the lever had to be adjusted to fit the can size, and the lever fixed with the wingnut. The top of the can was cut by pressing the cutting wheel into the can near the edge and rotating it along the can's rim.[7]

The necessity to pierce the can first was a nuisance, and this can opener design has not survived till present days. In 1925, the Star Can Opener Company of San Francisco, California had improved the Lyman's design by adding a second, toothed wheel called "feed wheel", which allowed a firm grip of the can edge. This addition was so efficient that the design is still in use today.

Whereas all previous openers required using one hand, or other means, to hold the can, can-holding openers both hold the can and open it. The first such opener was patented in 1931 by the Bunker Clancey Company of Kansas City, Missouri and was therefore called the "Bunker". It featured the now standard pliers-type handle, grasping which would tightly hold the can, while turning the key would rotate the cutting wheel progressively cutting the lid along the rim.[8] The Bunker company was absorbed by the Rival Manufacturing Company, also of Kansas City, in 1938.[2]

Churchkey

A key used to open cans by rolling their part on it
Churchkey from 3 angles
A modern butterfly opener which combines a serrated wheel and a churchkey

Churchkey initially referred to a simple hand-operated device for prying the cap (called a "crown cork") off a glass bottle; this kind of closure was invented in 1892.[9][10] The first of these churchkey style openers was patented in Canada in 1900.[11] The shape and design of some of these openers did resemble a large simple key.[12] In 1935, beer cans with flat tops were marketed, and a device to puncture the lids was needed. The same churchkey opener was used for piercing those cans. It was made from a single piece of pressed metal, with a pointed end used for piercing cans—devised by D.F. Sampson,[13][14] for the American Can Company, who depicted operating instructions on the cans themselves,[15] The churchkey opener is still being produced, usually as an attachment to another opener. For example, a "butterfly" opener is often a combination of the churchkey and a serrated-wheel opener.

There is sparse, and often contradictory, documentation as to the origin of the term "churchkey". The phrase is likely a sarcastic euphemism, as the opener was obviously not designed to access churches. One explanation is in Medieval Europe, most brewers were monks. Lagering cellars in the monasteries were locked, to protect aging beers and the monks carried keys to these lagering cellars. It may have been those keys, which remotely resembled the early churchkey openers, gave the "churchkey" opener its name.[16] Another motive for assigning the device such an ironic name could have been the fact beer was first canned (for test marketing) in 1933[17]—the same year Franklin Delano Roosevelt signed the Cullen-Harrison Bill.[18] This act, which predated Repeal of Prohibition, amended the Volstead Act, making 3.2 beer legal. Some experts have posited the term "churchkey" was a way to "stick it to" the religious organizations who had effected Prohibition in the first place.[19]

Another key opener with completely different design was patented by J. Osterhoudt in 1866.[20] Instead of piercing the can it was used to roll a stripe off the can. It was also called "key", because of resemblance to a door key. Such openers are attached to many small, thin-walled cans nowadays.[21]

Military use can openers

P-51 and P-38 openers

Several can openers with a simple and robust design had been specifically developed for military use. The P-38 and P-51 are small can openers with a cutter hinged to the main body. They were also known as "John Wayne" because the actor was shown in a training film opening a can of K-rations. The P-38 can opener is keychain-sized (about 1.5 inches, 38mm, in length) and consists of a short metal blade that serves as a handle (and can also be used as a screwdriver), with a small, hinged metal tooth that folds out to pierce the can lid. A notch just under the hinge point keeps the opener hooked around the rim of the can as the device is "walked" around to cut the lid out. A larger version called P-51 is somewhat easier to operate. P-38 was developed in 1942 and was issued in the canned field rations of the United States Armed Forces from World War II to the 1980s. The P-38 and P-51 are cheaper to manufacture and are smaller and lighter to carry than most other can openers. The device can be easily attached to a keyring or dog tag chain using the small punched hole.[22]

Official military designations for the P-38 include 'US Army pocket can opener' and 'Opener, can, hand, folding, type I'. As with some other military terms (e.g. jeep), the origin of the term is not known with certainty. The P-38 and P-51 openers share a designation with the P-38 and P-51 fighter planes, however this is coincidental. The most likely origin of the name is much more pedestrian; the P-38 is 38 mm (1.5 in) long. This explanation also holds for the P-51, which measures 51 mm (2.0 in) in length.[23]

P-38s are no longer used for individual rations by the United States Armed Forces, as canned C-rations were replaced by uncanned MREs in the 1980s. They are, however, included with US military "Tray Rations" (canned bulk meals). They are also still seen in disaster recovery efforts and have been handed out alongside canned food by rescue organizations, both in America and abroad in Afghanistan. The original US-contract P-38 can openers were manufactured by J.W. Speaker Corp. (stamped "US Speaker") and by Washburn Corp. (marked "US Androck"), they were later made by Mallin Hardware (now defunct) of Shelby, Ohio and were variously stamped "US Mallin Shelby O." or "U.S. Shelby Co.".[24]

Standard issue "FRED" can opener of the Australian Defence Force

A similar device that incorporates a small spoon at one end and a bottle opener at the other is currently employed by the Australian Defence Force and New Zealand Army in its ration kits. The Field Ration Eating Device is known by the acronym "FRED". It is also known widely in its derogative term, the "Fucking Ridiculous Eating Device".[25][26]

Another similar device was included with British Army 'Operational Ration Pack, General Purpose' 24-hour ration pack and 'Composite Ration Pack' rations. At one stage they were manufactured by W.P. Warren Engineering Co. Ltd. The instructions printed on the miniature greaseproof paper bag they were supplied in read: "Their design is similar, but not identical, to the P-38 and P-51 can openers."[24]

Most military use can openers have a very simple design and have also been produced for civilian use in many countries. For example, small folding openers similar to the P-38 and P-51 were designed back in 1924 and have been widely distributed in the Eastern European countries.[27]

In Slovenia a somewhat rounded version of a P-38 is known as "sardine can opener" because it was (in the nineties) usually packed with cans that did not feature the pull-and-tear precut top.

Electric openers

A modern Krups hand-held electric can opener

The first electric can opener was patented in 1931 and modeled after the cutting-wheel design.[28] Those openers have been produced in 1930s[29] and advertised as capable to remove lids from more than 20 cans per minute without any risk of injury.[30] Nevertheless, they found little success. Electric openers were re-introduced in 1956 by two Californian companies. Klassen Enterprises of Centreville brought out a wall-mounted electric model,[31] but this complex design was unpopular too.[2]

The same year, Walter Hess Bodle invented a freestanding device combining an electric can opener and knife sharpener.[32] He and his family members built their prototype in his garage with daughter Elizabeth sculpting the body design. It was manufactured under the "Udico" brand of the Union Die Casting Co. in Los Angeles and came in the flamingo pink, avocado green, and aqua blue colors of the era. These openers were introduced on the market for Christmas sales and had immediate success.[2]

Modern designs

Side can opener

A new style of can opener emerged in 1980s. Whereas most other openers cut the can from the top, this one cuts the can from the side, very near its top. The rim is neatly cut in half in the plane of the flat end, leaving half of the rim attached to the can and the other half attached to the flat end. No sharp edges are produced on the lid. The driving teeth are a lot finer than those of the classical can opener and reside at the bottom of a V-shaped groove, which surrounds the rim on three sides at the point of action.[33]

See also

References

  1. ^ a b Gordon L. Robertson (2006). Food packaging. CRC Press. pp. 122–123. ISBN 0849337755. http://books.google.com/?id=NFRR6GayR74C&pg=PA122. 
  2. ^ a b c d e "Lifting the lid on the tin can opener". http://www.researchpod.co.uk/pdf/lifting_the_lid_on_the_tin_can_opener.pdf. Retrieved 2009-08-08. 
  3. ^ "Can opener". http://www.ideafinder.com/history/inventions/canopener.htm. Retrieved 2009-08-08. 
  4. ^ Encyclopedia of Kitchen History. Taylor & Francis Group. 2004-09-27. ISBN 9781579583804. http://books.google.com/?id=D7IhN7lempUC&pg=PA143. 
  5. ^ Ezra J. Warner "Can opener" U.S. Patent 19,063, January 5, 1858
  6. ^ William W Lyman "Improvement in can openers" U.S. Patent 105,346 July 12, 1870.
  7. ^ Bryan H. Bunch, Alexander Hellemans (2004). The history of science and technology. Houghton Mifflin Harcourt. p. 398. ISBN 0618221239. http://books.google.com/?id=MlQ7NK9dw7IC&pg=PA398. 
  8. ^ Charles Arthur Bunker "Can opener" U.S. Patent 1,838,525 December 29, 1931.
  9. ^ William Painter "Bottle sealing device" U.S. Patent 468,258, 2 February 1892
  10. ^ Churchkey
  11. ^ Mario Theriault, Great Maritme Inventions 1833-1950, Goose Lane, 2001, p. 21
  12. ^ January 1980 JFO Newsletter
  13. ^ United States Bartenders Guild Newsletter
  14. ^ Short History of the Beer Can (part 2)
  15. ^ Flat Top Beer Cans
  16. ^ Jonathan Lighter, ed (1994). Historical Dictionary of American Slang. 1, A-G. New York: Random House. p. 422. http://www.wordorigins.org/index.php/church_key/. 
  17. ^ Timeline: History of Beer Cans
  18. ^ Brewery Collectibles Club of America - About the Beer Can
  19. ^ Word for Word Archive
  20. ^ J. Osterhoudt "Improved Method of Opening Tin Cans" U.S. Patent 58,554 Oct 2, 1866
  21. ^ "History of the Can: Can Opener". http://inventors.about.com/library/inventors/blcan.htm. Retrieved 2009-08-08. 
  22. ^ Foster, R. (Major) (18 August 1995). "The greatest Army invention ever". Pentagram (Army Public Affairs) (image of article at www.dogtagsrus.com). http://www.dogtagsrus.com/images/P38/p38newspaper.jpg. Retrieved 2009-08-08. 
  23. ^ P-38 Engineering Drawing
  24. ^ a b "The P-38 can opener". http://www.georgia-outfitters.com/page52.shtml. Retrieved 2009-08-08. 
  25. ^ Greame Hardiman. "The Malayan Emergency. 2RAR 1956/57". 2RAR. Digger History: an unofficial history of the Australian & New Zealand Armed Forces. http://www.diggerhistory.info/pages-conflicts-periods/malaya-korea/malaya-2rar.htm. Retrieved 2007-11-05. "I remember the spoon come tin opener that was in later years nicknamed "Fred" (Fucking ridiculous eating device)" 
  26. ^ "Australian Ration pack Contents". Ration Pack. Australian Defence News & Opinion - MilitaryPeople.com.au. 2007. http://www.militarypeople.com.au/mainsite/content/view/175/50/. Retrieved 2009-08-08. [dead link]
  27. ^ K. F. Schioniger "Folding can opener" U.S. Patent 1,507,093 2 September 1924
  28. ^ Preston C. West "Can opener" U.S. Patent 1,834,563 December 1, 1931
  29. ^ "Can openers". http://www.practicallyedible.com/edible.nsf/pages/canopeners. Retrieved 2009-08-08. 
  30. ^ Popular Science. 123. Bonnier Corporation. 1933. p. 18. ISSN 0161-7370. http://books.google.com/?id=7CcDAAAAMBAJ&pg=PA18. 
  31. ^ Bernard Klassen "Electrically operated can opener" U.S. Patent 2,789,345 March 26, 1956.
  32. ^ Walter H. Bodle "Can opening and knife sharpening device" U.S. Patent 2,897,589 December 4, 1956.
  33. ^ Kun-Jen Chang "Side cutting can opener with a double grip" U.S. Patent 5,946,811 4 November 1997

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • can opener — can openers N COUNT A can opener is the same as a tin opener …   English dictionary

  • can-opener — canˈ opener noun A tin opener • • • Main Entry: ↑can …   Useful english dictionary

  • can opener — can ,opener noun count a piece of equipment with a circular blade used for opening cans. British usually tin opener …   Usage of the words and phrases in modern English

  • can opener — can .opener n a tool for opening a can of food …   Dictionary of contemporary English

  • can opener — noun a device for cutting cans open • Syn: ↑tin opener • Hypernyms: ↑opener • Hyponyms: ↑church key * * * noun : a device for opening cans * * * a manual device or small electric appliance for opening cans. [ …   Useful english dictionary

  • can opener — UK / US noun [countable] Word forms can opener : singular can opener plural can openers a tin opener …   English dictionary

  • can opener — noun (C) especially AmE a tool for opening a can of food; tin opener BrE …   Longman dictionary of contemporary English

  • can-opener — noun An implement for opening metal cans. Syn: church key, tin opener …   Wiktionary

  • can opener — noun A device used to open tin cans, usually by slicing the lid off. Syn: tin opener …   Wiktionary

  • ˈcan ˌopener — noun [C] a tin opener …   Dictionary for writing and speaking English


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.