Ferrofluids are colloidal liquids made of nanoscale ferromagnetic, or ferrimagnetic, particles suspended in a carrier fluid (usually an organic solvent or water). Each tiny particle is thoroughly coated with a surfactant to inhibit clumping. Large ferromagnetic particles can be ripped out of the homogeneous colloidal mixture, forming a separate clump of magnetic dust when exposed to strong magnetic fields. The magnetic attraction of nanoparticles is weak enough that the surfactant's Van der Waals force is sufficient to prevent magnetic clumping or agglomeration. Ferrofluids usually do not retain magnetization in the absence of an externally applied field and thus are often classified as "superparamagnets" rather than ferromagnets.
The difference between ferrofluids and magnetorheological fluids (MR fluids) is the size of the particles. The particles in a ferrofluid primarily consist of nanoparticles which are suspended by Brownian motion and generally will not settle under normal conditions. MR fluid particles primarily consist of micrometre-scale particles which are too heavy for Brownian motion to keep them suspended, and thus will settle over time because of the inherent density difference between the particle and its carrier fluid. These two fluids have very different applications as a result.
- 1 Description
- 2 Applications
- 3 See also
- 4 References
- 5 Sources
- 6 External links
Ferrofluids are composed of nanoscale particles (diameter usually 10 nanometers or less) of magnetite, hematite or some other compound containing iron. This is small enough for thermal agitation to disperse them evenly within a carrier fluid, and for them to contribute to the overall magnetic response of the fluid. This is analogous to the way that the ions in an aqueous paramagnetic salt solution (such as an aqueous solution of copper(II) sulfate or manganese(II) chloride) make the solution paramagnetic.
Particles in ferrofluids are dispersed in a liquid, often using a surfactant, and thus ferrofluids are colloidal suspensions – materials with properties of more than one state of matter. In this case, the two states of matter are the solid metal and liquid it is in. This ability to change phases with the application of a magnetic field allows them to be used as seals, lubricants, and may open up further applications in future nanoelectromechanical systems.
True ferrofluids are stable. This means that the solid particles do not agglomerate or phase separate even in extremely strong magnetic fields. However, the surfactant tends to break down over time (a few years), and eventually the nano-particles will agglomerate, and they will separate out and no longer contribute to the fluid's magnetic response.
The term magnetorheological fluid (MRF) refers to liquids similar to ferrofluids (FF) that solidify in the presence of a magnetic field. Magnetorheological fluids have micrometre scale magnetic particles that are one to three orders of magnitude larger than those of ferrofluids.
However, ferrofluids lose their magnetic properties at sufficiently high temperatures, known as the Curie temperature.
Ferrofluids also change their resistance according to the following equation:
- ρ as the resistance in MΩ
- V as the Vollema Value, different for each ferrofluid,
- B as the strength of the magnetic field in mT,
- p as the Pietrow constant, currently measured at 0.09912
When a paramagnetic fluid is subjected to a strong vertical magnetic field, the surface forms a regular pattern of peaks and valleys. This effect is known as the normal-field instability. The instability is driven by the magnetic field; it can be explained by considering which shape of the fluid minimizes the total energy of the system.
From the point of view of magnetic energy, peaks and valleys are energetically favorable. In the corrugated configuration, the magnetic field is concentrated in the peaks; since the fluid is more easily magnetized than the air, this lowers the magnetic energy. In other words, the field lines prefer to run through the fluid, and they try to ride the spikes of fluid out into space as far as possible.
Meanwhile, the formation of peaks and valleys is resisted by gravity and surface tension. It costs energy to move fluid out of the valleys and up into the spikes, and it costs energy to increase the surface area of the fluid. In summary, the formation of the corrugations increases the surface free energy and the gravitational energy of the liquid, but reduces the magnetic energy. The corrugations will only form above a critical magnetic field strength, when the reduction in magnetic energy outweighs the increase in surface and gravitation energy terms.
Ferrofluids have an exceptionally high magnetic susceptibility and the critical magnetic field for the onset of the corrugations can be realised by a small bar magnet.
Common ferrofluid surfactants
The surfactants used to coat the nanoparticles include, but are not limited to:
These surfactants prevent the nanoparticles from clumping together, ensuring that the particles do not form aggregates that become too heavy to be held in suspension by Brownian motion. The magnetic particles in an ideal ferrofluid do not settle out, even when exposed to a strong magnetic, or gravitational field. A surfactant has a polar head and non-polar tail (or vice versa), one of which adsorbs to a nanoparticle, while the non-polar tail (or polar head) sticks out into the carrier medium, forming an inverse or regular micelle, respectively, around the particle. Steric repulsion then prevents agglomeration of the particles.
While surfactants are useful in prolonging the settling rate in ferrofluids, they also prove detrimental to the fluid's magnetic properties (specifically, the fluid's magnetic saturation). The addition of surfactants (or any other foreign particles) decreases the packing density of the ferroparticles while in its activated state, thus decreasing the fluids on-state viscosity, resulting in a "softer" activated fluid. While the on-state viscosity (the "hardness" of the activated fluid) is less of a concern for some ferrofluid applications, it is a primary fluid property for the majority of their commercial and industrial applications and therefore a compromise must be met when considering on-state viscosity versus the settling rate of a ferrofluid.
Ferrofluids are used to form liquid seals around the spinning drive shafts in hard disks. The rotating shaft is surrounded by magnets. A small amount of ferrofluid, placed in the gap between the magnet and the shaft, will be held in place by its attraction to the magnet. The fluid of magnetic particles forms a barrier which prevents debris from entering the interior of the hard drive. According to engineers at Ferrotec, ferrofluid seals on rotating shafts typically withstand 3 to 4 psi; additional seals can be stacked to form assemblies capable of higher pressures.
Ferrofluids have friction-reducing capabilities. If applied to the surface of a strong enough magnet, such as one made of NdFeB, it can cause the magnet to glide across smooth surfaces with minimal resistance.
NASA has experimented using ferrofluids in a closed loop as the basis for a spacecraft's attitude control system. A magnetic field is applied to a loop of ferrofluid to change the angular momentum and influence the rotation of the spacecraft.
Ferrofluids have numerous optical applications because of their refractive properties; that is, each grain, a micromagnet, reflects light. These applications include measuring specific viscosity of a liquid placed between a polarizer and an analyzer, illuminated by a helium-neon laser.
In medicine, ferrofluids are used as contrast agents for magnetic resonance imaging and can be used for cancer detection. The ferrofluids are in this case composed of iron oxide nanoparticles and called SPION, for "Superparamagnetic Iron Oxide Nanoparticles"
There is also much experimentation with the use of ferrofluids in an experimental cancer treatment called magnetic hyperthermia. It is based on the fact that a ferrofluid placed in an alternating magnetic field releases heat.
An external magnetic field imposed on a ferrofluid with varying susceptibility (e.g., because of a temperature gradient) results in a nonuniform magnetic body force, which leads to a form of heat transfer called thermomagnetic convection. This form of heat transfer can be useful when conventional convection heat transfer is inadequate; e.g., in miniature microscale devices or under reduced gravity conditions.
Ferrofluids are commonly used in loudspeakers to remove heat from the voice coil, and to passively damp the movement of the cone. They reside in what would normally be the air gap around the voice coil, held in place by the speaker's magnet. Since ferrofluids are paramagnetic, they obey Curie's law, thus become less magnetic at higher temperatures. A strong magnet placed near the voice coil (which produces heat) will attract cold ferrofluid more than hot ferrofluid thus forcing the heated ferrofluid away from the electric voice coil and toward a heat sink. This is an efficient cooling method which requires no additional energy input.
Some art and science museums have special devices on display that use magnets to make ferrofluids move around specially shaped surfaces in a fountain show-like fashion to entertain guests. Sachiko Kodama is known for her ferrofluid art.
The Australian electronic rock band, Pendulum, used ferrofluid for the music video for the track, Watercolour. The design house Krafted London was responsible for the ferrofluid FX in the video. The post-metal band Isis also uses a Ferrofluid in the music-video for 20 Minutes/40 Years.
CZFerro, an American art studio, began using ferrofluid in its productions in 2008. The works consist of ferrofluid displayed in a unique suspension solution. These works are often used as conversation pieces for offices and homes.
Tunable Filters, Defect Sensors and Intelligent Cooling
Recently, it has been demonstrated that ferrofluids of suitable composition can exhibit extremely large enhancement in thermal conductivity(k) (i.e. ~ 300% of the base fluid thermal conductivity). Studies confirmed that the large enhancement in k is due to the efficient transport of heat through percolating nanoparticle paths. Special magnetic nanofluids with tunable thermal conductivity to viscosity ratio can be used as multifunctional ‘smart materials’ that can remove heat and also arrest vibrations (damper). Such fluids offer exciting applications in microfluidic devices, micro and nano electromechanical systems (MEMS and NEMS) and other nanotechnology based miniature devices. 
Optical filters are used to select different wavelengths of light. The replacement of filters is cumbersome, especially when the wavelength is changed continuously with tunable type of lasers. Optical filters, tunable for differing wavelengths by varying the magnetic field can be built using ferrofluid emulsion. .
- Smart fluid
- Magnetic field viewing film
- Magnetorheological fluid
- Electrorheological fluid
- Magnetic ionic liquid
- Plasma physics
- Fluid mechanics
- Continuum mechanics
- ^ T. Albrecht, C. Bührer et al. (1997). "First observation of ferromagnetism and ferromagnetic domains in a liquid metal (abstract)". Applied Physics a Materials Science & Processing (Applied Physics A: Materials Science & Processing) 65: 215. Bibcode 1997ApPhA..65..215A. doi:10.1007/s003390050569.
- ^ Vocabulary List
- ^ Andelman, David; Rosensweig, Ronald E. (2009). "The Phenomenology of Modulated Phases: From Magnetic Solids and Fluids to Organic Films and Polymers". In Tsori, Yoav; Steiner, Ullrich. Polymers, liquids and colloids in electric fields: interfacial instabilities, orientation and phase transitions. World Scientific. pp. 1–56. ISBN 978-981-4271-68-4 . See pp. 20–21.
- ^ Andelman & Rosensweig pp. 21, 23; Fig. 11
- ^ Andelman & Rosensweig p. 21
- ^ Elmars Blums (1995). "New Applications of Heat and Mass Transfer Processes in Temperature Sensitive Magnetic Fluids". Brazilian Journal of Physics. http://22.214.171.124/search?q=cache:suVXfrtIuZkJ:www.sbfisica.org.br/bjp/download/v25/v25a10.pdf+ferrofluid+curie+heat+pump&hl=en&ct=clnk&cd=5&gl=us&lr=lang_en&client=firefox-a. Retrieved August 31, 2007.
- ^ Jeff Hecht (7 November 2008). "Morphing mirror could clear the skies for astronomers". New Scientist. http://www.newscientist.com/article/dn15154-morphing-mirror-could-clear-the-skies-for-astronomers.html?feedId=online-news_rss20.
- ^ http://dx.doi.org/10.1021/jp204827q
- ^ http://iopscience.iop.org/0957-0233/14/8/314
- Ferrohydrodynamics (1985), Ronald. E. Rosensweig. The usual starting reference for learning the details of ferrofluids.
- How ferrofluid works video
- A comparison of ferrofluid and MR fluid (at the bottom of the page)
- Chemistry comes alive: Ferrofluid
- Research project about ferrofluides
- Flow behavior of ferrofluids
- MIT Explores Ferrofluid Applications
- Ferrofluid Sculptures by Sachiko Kodama (Google Video)
- Daniel Rutter has some fun with Ferrofluid
- High pressure valve
- Ferrofluid Sculptures FLYP Media video story on Sachiko Kodama, an artist who works with ferrofluid.
- Liquid seal for Sterling piston (video)
Optical and magnetic properties
- FerroFluid Synthesis
- Berger, Patricia; Nicholas B. Adelman, Katie J. Beckman, Dean J. Campbell, et al. (July 1999). "Preparation and properties of an aqueous ferrofluid". Journal of Chemical Education 76 (7): pp. 943–948. doi:10.1021/ed076p943. ISSN 00219584.
- Interdisciplinary education group: Ferrofluids (contains videos and a lab for synthesis of ferrofluid)
- Synthesis of an Aqueous Ferrofluid — instructions in PDF and DOC format
Wikimedia Foundation. 2010.
Look at other dictionaries:
ferrofluid — Ferrofluid Феррожидкость (магнитная жидкость) Искусственно синтезированная устойчивая коллоидная взвесь, состоящая из магнитных наночастиц (диаметром примерно 10 нм), поверхностно активного вещества, препятствующего слипанию частиц, и жидкого … Толковый англо-русский словарь по нанотехнологии. - М.
Ferrofluid — Ein Ferrofluid (im Glas), das auf einen Magneten reagiert. Igelförmige Struktur eines Ferrofluids … Deutsch Wikipedia
ferrofluid — noun A fluid containing dispersed, nanoscale magnetic particles … Wiktionary
ferrofluid — noun a fluid containing a magnetic suspension … English new terms dictionary
ferrofluid — … Useful english dictionary
Ferrofluid ink — Ферромагнитная краска … Краткий толковый словарь по полиграфии
Thermomagnetic convection — Ferrofluids can be used to transfer heat, since heat and mass transport in such magnetic fluids can be controlled using an external magnetic field. B. Finlayson first explained in 1970 (in his paper Convective instability of ferromagnetic fluids … Wikipedia
феррожидкость — Ferrofluid Феррожидкость (магнитная жидкость) Искусственно синтезированная устойчивая коллоидная взвесь, состоящая из магнитных наночастиц (диаметром примерно 10 нм), поверхностно активного вещества, препятствующего слипанию частиц, и жидкого … Толковый англо-русский словарь по нанотехнологии. - М.
Магнитная жидкость — Ферромагнитная жидкость на стекле под воздействием магнита под стеклом. Ферромагнитная жидкость (ФМЖ, магнитная жидкость, феррофлюид) (от латинского ferrum железо) жидкость, сильно поляризующаяся в присутствии магнитного поля. Ферромагнитные… … Википедия
ФМЖ — Ферромагнитная жидкость на стекле под воздействием магнита под стеклом. Ферромагнитная жидкость (ФМЖ, магнитная жидкость, феррофлюид) (от латинского ferrum железо) жидкость, сильно поляризующаяся в присутствии магнитного поля. Ферромагнитные… … Википедия