Protecting group

Protecting group

A protecting group or protective group is introduced into a molecule by chemical modification of a functional group in order to obtain chemoselectivity in a subsequent chemical reaction. It plays an important role in multistep organic synthesis.

Acetal protection of a ketone during reduction of an ester, vs. reduction to a dialcohol when unprotected.

In many preparations of delicate organic compounds, some specific parts of their molecules cannot survive the required reagents or chemical environments. Then, these parts, or groups, must be protected. For example, lithium aluminium hydride is a highly reactive but useful reagent capable of reducing esters to alcohols. It will always react with carbonyl groups, and this cannot be discouraged by any means. When a reduction of an ester is required in the presence of a carbonyl, the attack of the hydride on the carbonyl has to be prevented. For example, the carbonyl is converted into an acetal, which does not react with hydrides. The acetal is then called a protecting group for the carbonyl. After the step involving the hydride is complete, the acetal is removed (by reacting it with an aqueous acid), giving back the original carbonyl. This step is called deprotection.

Protecting groups are more commonly used in small-scale laboratory work and initial development than in industrial production processes because their use adds additional steps and material costs to the process. However, the availability of a cheap chiral building block can overcome these additional costs (e.g. shikimic acid for oseltamivir).

Contents

Common protecting groups

Alcohol protecting groups

Protection of alcohols:

  • Acetyl (Ac) - Removed by acid or base (see Acetoxy group).
  • Benzoyl (Bz) - Removed by acid or base, more stable than Ac group.
  • Benzyl (Bn, Bnl) - Removed by hydrogenolysis. Bn group is widely used in sugar and nucleoside chemistry.
  • β-Methoxyethoxymethyl ether (MEM) - Removed by acid.
  • Dimethoxytrityl, [bis-(4-methoxyphenyl)phenylmethyl] (DMT) - Removed by weak acid. DMT group is widely used for protection of 5'-hydroxy group in nucleosides, particularly in oligonucleotide synthesis.
  • Methoxymethyl ether (MOM) - Removed by acid.
  • Methoxytrityl [(4-methoxyphenyl)diphenylmethyl, MMT) - Removed by acid and hydrogenolysis.
  • p-Methoxybenzyl ether (PMB) - Removed by acid, hydrogenolysis, or oxidation.
  • Methylthiomethyl ether - Removed by acid.
  • Pivaloyl (Piv) - Removed by acid, base or reductant agents. It is substantially more stable than other acyl protecting groups.
  • Tetrahydropyranyl (THP) - Removed by acid.
  • Trityl (triphenylmethyl, Tr) - Removed by acid and hydrogenolysis.
  • Silyl ether (most popular ones include trimethylsilyl (TMS), tert-butyldimethylsilyl (TBDMS), tri-iso-propylsilyloxymethyl (TOM), and triisopropylsilyl (TIPS) ethers) - Removed by acid or fluoride ion. (such as NaF, TBAF (Tetra-n-butylammonium fluoride, HF-Py, or HF-NEt3)). TBDMS and TOM groups are used for protection of 2'-hydroxy function in nucleosides, particularly in oligonucleotide synthesis.
  • Methyl Ethers - Cleavage is by TMSI in DCM or MeCN or Chloroform the other method to cleave methyl ethers is BBr3 in DCM
  • Ethoxyethyl ethers (EE) - Cleavage more trivial than simple ethers e.g. 1N Hydrochloric acid [1]

Amine protecting groups

Protection of amines:

  • Carbobenzyloxy (Cbz) group - Removed by hydrogenolysis
  • hydrogenolysis, more labile than Cbz
  • tert-Butyloxycarbonyl (BOC) group (Common in solid phase peptide synthesis) - Removed by concentrated, strong acid. (such as HCl or CF3COOH)
  • 9-Fluorenylmethyloxycarbonyl (FMOC) group (Common in solid phase peptide synthesis) - Removed by base, such as piperidine
  • Acetyl (Ac) group is common in oligonucleotide synthesis for protection of N4 in cytosine and N6 in adenine nucleic bases and is removed by treatment with a base, most often, with aqueous or gaseous ammonia or methylamine. Ac is too stable to be readily removed from aliphatic amides.
  • Benzoyl (Bz) group is common in oligonucleotide synthesis for protection of N4 in cytosine and N6 in adenine nucleic bases and is removed by treatment with a base, most often with aqueous or gaseous ammonia or methylamine. Bz is too stable to be readily removed from aliphatic amides.
  • Benzyl (Bn) group - Removed by hydrogenolysis
  • Carbamate group - Removed by acid and mild heating.
  • hydrogenolysis, more labile than Benzyl
  • 3,4-Dimethoxybenzyl (DMPM) - Removed by hydrogenolysis, more labile than p-methoxybenzyl
  • Ammonium cerium(IV) nitrate (CAN)
  • Tosyl (Ts) group - Removed by concentrated acid (HBr, H2SO4) & strong reducing agents (sodium in liquid ammonia or sodium naphthalenide)
  • Other Sulfonamides (Nosyl & Nps) groups - Removed by samarium iodide, tributyltin hydride[2]

Carbonyl protecting groups

Protection of carbonyl groups:

  • Acetals and Ketals - Removed by acid. Normally, the cleavage of acyclic acetals is easier than of cyclic acetals.
  • Acylals - Removed by Lewis acids.
  • Dithianes - Removed by metal salts or oxidizing agents.

Carboxylic acid protecting groups

Protection of carboxylic acids:

  • Methyl esters - Removed by acid or base.
  • Benzyl esters - Removed by hydrogenolysis.
  • tert-Butyl esters - Removed by acid, base and some reductants.
  • Silyl esters - Removed by acid, base and organometallic reagents.
  • Orthoesters - Removed by mild aqueous acid to form ester, which is removed according to ester properties.
  • Oxazoline - Removed by strong hot acid (pH < 1, T > 100 °C) or alkali (pH > 12, T > 100 °C), but not e.g. LiAlH4, organolithium reagents or Grignard (organomagnesium) reagents

Phosphate protecting groups

  • 2-cyanoethyl - removed by mild base. The group is widely used in oligonucleotide synthesis.
  • Methyl (Me) - removed by strong nucleophiles e.c. thiophenole/TEA.

Terminal alkyne protecting groups

Orthogonal protection

Orthogonal protection is a strategy allowing the deprotection of multiple protective groups one at a time each with a dedicated set of reaction conditions without affecting the other. It was introduced in the field of peptide synthesis by Robert Bruce Merrifield in 1977.[4] As a proof of concept orthogonal deprotection is demonstrated in a photochemical transesterification by trimethylsilyldiazomethane utilizing the kinetic isotope effect [5]:

Orthogonal protection Application In Photochemistry

Due to this effect the quantum yield for deprotection of the right-side ester group is reduced and it stays intact. Significantly by placing the deuterium atoms next to the left-side ester group or by changing the wavelength to 254 nm the other monoarene is obtained.

Criticism

In a 2007 paper [6] Phil Baran notes that even though the textbooks state that the use of protective groups is unavoidable and that they are ideally easily added and removed, in practical terms in organic synthesis their use adds two synthetic steps (protection-deprotection sequence) to a chemical sequence and sometimes dramatically lowers chemical yield. Crucially, added complexity impedes the use of synthetic total synthesis in drug discovery. In contrast biomimetic synthesis does not employ protective groups. As an alternative, Baran presented a novel protective-group free synthesis of the compound hapalindole U. The previously published synthesis [7][8][9] according to Baran, contained 20 steps with multiple protective group manipulations (two confirmed):

Ambiguine Synthesis Bagan 2007 Hapalindole U synthesis Muratake 1990
Hapalindole U Baran 2007 protective-group free Hapalindole U Muratake 1990 Ts protective groups in blue

Industrial applications

Although the use of protecting groups is not preferred in industrial syntheses, they are still used in industrial contexts, e.g.:

External links

References

  1. ^ Kamaya, Yasushi; T Higuchi (2006). "Metabolism of 3,4-dimethoxycinnamyl alcohol and derivatives by Coriolus versicolor". FEMS Microbiology Letters 24 (2-3): 225–229. doi:10.1111/j.1574-6968.1984.tb01309.x. 
  2. ^ Moussa, Ziad; D. Romo (2006). "Mild deprotection of primary N-(p-toluenesufonyl) amides with SmI2 following trifluoroacetylation". Synlett 2006 (19): 3294–3298. doi:10.1055/s-2006-951530. 
  3. ^ Clayden et al. Organic Chemistry, p. 1291
  4. ^ Merrifield, R. B.; Barany, G.; Cosand, W. L.; Engelhard, M.; Mojsov, S. Pept.: Proc. Am. Pept. Symp. 5th 1977
  5. ^ Isotope Effects in Photochemistry: Application to Chromatic Orthogonality Aurélien Blanc and Christian G. Bochet Org. Lett.; 2007; 9(14) pp 2649 - 2651; (Letter) doi: 10.1021/ol070820h
  6. ^ Total synthesis of marine natural products without using protecting groups Phil S. Baran, Thomas J. Maimone1 & Jeremy M. Richter Nature 446, 404-408 (22 March 2007) doi:10.1038/nature05569
  7. ^ Synthetic studies of marine alkaloids hapalindoles. Part 3 Total synthesis of (±)-hapalindoles H and U Tetrahedron, Volume 46, Issue 18, 1990, Pages 6351-6360 Hideaki Muratake, Harumi Kumagami and Mitsutaka Natsume doi:10.1016/S0040-4020(01)96007-7
  8. ^ Synthetic studies of marine alkaloids hapalindoles. Part I Total synthesis of (±)-hapalindoles J and M Tetrahedron, Volume 46, Issue 18, 1990, Pages 6331-6342 Hideaki Muratake and Mitsutaka Natsume doi:10.1016/S0040-4020(01)96005-3
  9. ^ Synthetic studies of marine alkaloids hapalindoles. Part 2. Lithium aluminum hydride reduction of the electron-rich carbon-carbon double bond conjugated with the indole nucleus Tetrahedron, Volume 46, Issue 18, 1990, Pages 6343-6350 Hideaki Muratake and Mitsutaka Natsume doi:10.1016/S0040-4020(01)96006-5


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • protecting group — noun Any chemical entity that is temporarily reacted with a functional group so as to protect it from a subsequent reaction …   Wiktionary

  • group — [gruːp] noun [countable] 1. also group of companies ORGANIZATIONS a large business organization that consists of several companies that all have the same owner: • Burmah Castrol, the lubricants group • the sale of the Rover Group to BMW …   Financial and business terms

  • Acetoxy group — The structure of the acetoxy group. Acetoxy group, abbreviated AcO or OAc, is a chemical functional group of the structure CH3 C(=O) O . It differs from the acetyl group CH3 C(=O) by the presence of one additional oxygen atom. The name acetoxy is …   Wikipedia

  • Special Tactics Group — Infobox Military Unit unit name= Armed Offenders Squad caption=Special Tactics Group Patch country= type= branch= New Zealand Police dates= 1964 Present specialization= Domestic Counter Terrorism and Law Enforcement command structure= Under… …   Wikipedia

  • Oceana (non-profit group) — Oceana Founded 2001 Location Washington, D.C. Key people Andrew Sharpless, CEO James Simon, Executive Vice President and General Counsel Michael Hirshfield, Senior Vice President, North America and Chief Scientist Keith Addis, Board Chairman …   Wikipedia

  • 253d Combat Communications Group — Infobox Military Unit unit name= 253d Combat Communications Group caption= 253d Combat Communications Group logo dates= 19xx–present country= United States allegiance= branch= United States Air Force type= role= size= command structure= current… …   Wikipedia

  • Victoria Police Special Operations Group — The Special Operations Group (SOG) is the Police Tactical Group of the Victoria Police.HistoryThe Special Operations Group was formed in 1977 [ [http://www.police.vic.gov.au/content.asp?Document ID=173 Victoria Police Special Operations Group… …   Wikipedia

  • Liberty (pressure group) — Liberty The National Council for Civil Liberties (NCCL) Motto To protect civil liberties and promote human rights for everyone Formation 1 January 1934 (1934 01 01) (77 years ago) Type Political pressure group …   Wikipedia

  • Gogo (ethnic group) — The Gogo (or Wagogo) are a Bantu ethnic and linguistic group based in the Dodoma Region of central Tanzania. In 1992 the Gogo population was estimated to number 1,300,000. [http://www.ethnologue.com/show language.asp?code=gog] The Gogo have… …   Wikipedia

  • U.S. Carrier Group tactics — Naval tactics have played a crucial role in modern battles and wars. The presence of land, changing water depths, weather, detection and electronic warfare, the speed at which actual combat occurs and other factors especially air power render… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”