Pulse-code modulation

Pulse-code modulation

Pulse-code modulation (PCM) is a method used to digitally represent sampled analog signals. It is the standard form for digital audio in computers and various Blu-ray, Compact Disc and DVD formats, as well as other uses such as digital telephone systems. A PCM stream is a digital representation of an analog signal, in which the magnitude of the analogue signal is sampled regularly at uniform intervals, with each sample being quantized to the nearest value within a range of digital steps.

PCM streams have two basic properties that determine their fidelity to the original analog signal: the sampling rate, which is the number of times per second that samples are taken; and the bit depth, which determines the number of possible digital values that each sample can take.

Contents

History

In the history of electrical communications, the earliest reason for sampling a signal was to interlace samples from different telegraphy sources, and convey them over a single telegraph cable. Telegraph time-division multiplexing (TDM) was conveyed as early as 1853, by the American inventor Moses G. Farmer. The electrical engineer W. M. Miner, in 1903, used an electro-mechanical commutator for time-division multiplex of multiple telegraph signals, and also applied this technology to telephony. He obtained intelligible speech from channels sampled at a rate above 3500–4300 Hz: below this was unsatisfactory. This was TDM, but pulse-amplitude modulation (PAM) rather than PCM.

In 1926, Paul M. Rainey of Western Electric patented a facsimile machine which transmitted its signal using 5-bit PCM, encoded by an opto-mechanical analog-to-digital converter.[1] The machine did not go into production. British engineer Alec Reeves, unaware of previous work, conceived the use of PCM for voice communication in 1937 while working for International Telephone and Telegraph in France. He described the theory and advantages, but no practical use resulted. Reeves filed for a French patent in 1938, and his U.S. patent was granted in 1943.

The first transmission of speech by digital techniques was the SIGSALY encryption equipment used for high-level Allied communications during World War II. In 1943, the Bell Labs researchers who designed the SIGSALY system became aware of the use of PCM binary coding as already proposed by Alec Reeves. In 1949 for the Canadian Navy's DATAR system, Ferranti Canada built a working PCM radio system that was able to transmit digitized radar data over long distances.[2]

PCM in the late 1940s and early 1950s used a cathode-ray coding tube with a plate electrode having encoding perforations.[3][4] As in an oscilloscope, the beam was swept horizontally at the sample rate while the vertical deflection was controlled by the input analog signal, causing the beam to pass through higher or lower portions of the perforated plate. The plate collected or passed the beam, producing current variations in binary code, one bit at a time. Rather than natural binary, the grid of Goodall's later tube was perforated to produce a glitch-free Gray code, and produced all bits simultaneously by using a fan beam instead of a scanning beam.

The National Inventors Hall of Fame has honored Bernard M. Oliver[5] and Claude Shannon[6] as the inventors of PCM,[7] as described in 'Communication System Employing Pulse Code Modulation,' U.S. Patent 2,801,281 filed in 1946 and 1952, granted in 1956. Another patent by the same title was filed by John R. Pierce in 1945, and issued in 1948: U.S. Patent 2,437,707. The three of them published "The Philosophy of PCM" in 1948.[8]

Pulse-code modulation (PCM) was used in Japan by Denon in 1972 for the mastering and production of analogue phonograph records, using a 2-inch Quadruplex-format videotape recorder for its transport, but this was not developed into a consumer product.

Modulation

Sampling and quantization of a signal (red) for 4-bit PCM

In the diagram, a sine wave (red curve) is sampled and quantized for pulse code modulation. The sine wave is sampled at regular intervals, shown as ticks on the x-axis. For each sample, one of the available values (ticks on the y-axis) is chosen by some algorithm. This produces a fully discrete representation of the input signal (shaded area) that can be easily encoded as digital data for storage or manipulation. For the sine wave example at right, we can verify that the quantized values at the sampling moments are 7, 9, 11, 12, 13, 14, 14, 15, 15, 15, 14, etc. Encoding these values as binary numbers would result in the following set of nibbles: 0111 (23×0+22×1+21×1+20×1=0+4+2+1=7), 1001, 1011, 1100, 1101, 1110, 1110, 1111, 1111, 1111, 1110, etc. These digital values could then be further processed or analyzed by a digital signal processor. Several PCM streams could also be multiplexed into a larger aggregate data stream, generally for transmission of multiple streams over a single physical link. One technique is called time-division multiplexing (TDM) and is widely used, notably in the modern public telephone system.

The PCM process is commonly implemented on a single integrated circuit and is generally referred to as an analog-to-digital converter (ADC).

Demodulation

To produce output from the sampled data, the procedure of modulation is applied in reverse. After each sampling period has passed, the next value is read and the output signal is shifted to the new value. As a result of these transitions, the signal will have a significant amount of high-frequency energy. To smooth out the signal and remove these undesirable aliasing frequencies, the signal is passed through analog filters that suppress energy outside the expected frequency range (that is, greater than the Nyquist frequency fs / 2).[note 1] The sampling theorem suggests that practical PCM devices, provided a sampling frequency that is sufficiently greater than that of the input signal, can operate without introducing significant distortions within their designed frequency bands.

The electronics involved in producing an accurate analog signal from the discrete data are similar to those used for generating the digital signal. These devices are Digital-to-analog converters (DACs), and operate similarly to ADCs. They produce on their output a voltage or current (depending on type) that represents the value presented on their digital inputs. This output would then generally be filtered and amplified for use.

Limitations

There are potential sources of impairment implicit in any PCM system:

  • Choosing a discrete value near the analog signal for each sample leads to quantization error.[note 2]
  • Between samples no measurement of the signal is made; the sampling theorem guarantees non-ambiguous representation and recovery of the signal only if it has no energy at frequency fs/2 or higher (one half the sampling frequency, known as the Nyquist frequency); higher frequencies will generally not be correctly represented or recovered.
  • As samples are dependent on time, an accurate clock is required for accurate reproduction. If either the encoding or decoding clock is not stable, its frequency drift will directly affect the output quality of the device.[note 3]

Digitization as part of the PCM process

In conventional PCM, the analog signal may be processed (e.g., by amplitude compression) before being digitized. Once the signal is digitized, the PCM signal is usually subjected to further processing (e.g., digital data compression).

PCM with linear quantization is known as Linear PCM (LPCM).[9]

Some forms of PCM combine signal processing with coding. Older versions of these systems applied the processing in the analog domain as part of the analog-to-digital process; newer implementations do so in the digital domain. These simple techniques have been largely rendered obsolete by modern transform-based audio compression techniques.

  • DPCM encodes the PCM values as differences between the current and the predicted value. An algorithm predicts the next sample based on the previous samples, and the encoder stores only the difference between this prediction and the actual value. If the prediction is reasonable, fewer bits can be used to represent the same information. For audio, this type of encoding reduces the number of bits required per sample by about 25% compared to PCM.
  • Adaptive DPCM (ADPCM) is a variant of DPCM that varies the size of the quantization step, to allow further reduction of the required bandwidth for a given signal-to-noise ratio.
  • Delta modulation is a form of DPCM which uses one bit per sample.

In telephony, a standard audio signal for a single phone call is encoded as 8,000 analog samples per second, of 8 bits each, giving a 64 kbit/s digital signal known as DS0. The default signal compression encoding on a DS0 is either μ-law (mu-law) PCM (North America and Japan) or A-law PCM (Europe and most of the rest of the world). These are logarithmic compression systems where a 12 or 13-bit linear PCM sample number is mapped into an 8-bit value. This system is described by international standard G.711. An alternative proposal for a floating point representation, with 5-bit mantissa and 3-bit radix, was abandoned.

Where circuit costs are high and loss of voice quality is acceptable, it sometimes makes sense to compress the voice signal even further. An ADPCM algorithm is used to map a series of 8-bit µ-law or A-law PCM samples into a series of 4-bit ADPCM samples. In this way, the capacity of the line is doubled. The technique is detailed in the G.726 standard.

Later it was found that even further compression was possible and additional standards were published. Some of these international standards describe systems and ideas which are covered by privately owned patents and thus use of these standards requires payments to the patent holders.

Some ADPCM techniques are used in Voice over IP communications.

Encoding for serial transmission

Pulse-code modulation can be either return-to-zero (RZ) or non-return-to-zero (NRZ). For a NRZ system to be synchronized using in-band information, there must not be long sequences of identical symbols, such as ones or zeroes. For binary PCM systems, the density of 1-symbols is called ones-density.[10]

Ones-density is often controlled using precoding techniques such as Run Length Limited encoding, where the PCM code is expanded into a slightly longer code with a guaranteed bound on ones-density before modulation into the channel. In other cases, extra framing bits are added into the stream which guarantee at least occasional symbol transitions.

Another technique used to control ones-density is the use of a scrambler polynomial on the raw data which will tend to turn the raw data stream into a stream that looks pseudo-random, but where the raw stream can be recovered exactly by reversing the effect of the polynomial. In this case, long runs of zeroes or ones are still possible on the output, but are considered unlikely enough to be within normal engineering tolerance.

In other cases, the long term DC value of the modulated signal is important, as building up a DC offset will tend to bias detector circuits out of their operating range. In this case special measures are taken to keep a count of the cumulative DC offset, and to modify the codes if necessary to make the DC offset always tend back to zero.

Many of these codes are bipolar codes, where the pulses can be positive, negative or absent. In the typical alternate mark inversion code, non-zero pulses alternate between being positive and negative. These rules may be violated to generate special symbols used for framing or other special purposes.

Nomenclature

The word pulse in the term Pulse-Code Modulation refers to the "pulses" to be found in the transmission line. This perhaps is a natural consequence of this technique having evolved alongside two analog methods, pulse width modulation and pulse position modulation, in which the information to be encoded is in fact represented by discrete signal pulses of varying width or position, respectively. In this respect, PCM bears little resemblance to these other forms of signal encoding, except that all can be used in time division multiplexing, and the binary numbers of the PCM codes are represented as electrical pulses. The device that performs the coding and decoding function in a telephone circuit is called a codec.

See also

Notes

  1. ^ Some systems use digital filtering to remove some of the aliasing, converting the signal from digital to analog at a higher sample rate such that the analog filter required for anti-aliasing is much simpler. In some systems, no explicit filtering is done at all; as it's impossible for any system to reproduce a signal with infinite bandwidth, inherent losses in the system compensate for the artifacts — or the system simply does not require much precision.
  2. ^ Quantization error swings between -q/2 and q/2. In the ideal case (with a fully linear ADC) it is uniformly distributed over this interval, with zero mean and variance of q2/12.
  3. ^ A slight difference between the encoding and decoding clock frequencies is not generally a major concern; a small constant error is not noticeable. Clock error does become a major issue if the clock is not stable, however. A drifting clock, even with a relatively small error, will cause very obvious distortions in audio and video signals, for example.

References

  1. ^ U.S. patent number 1,608,527; also see p. 8, Data conversion handbook, Walter Allan Kester, ed., Newnes, 2005, ISBN 0750678410.
  2. ^ Porter, Arthur. So Many Hills to Climb (2004) Beckham Publications Group
  3. ^ R. W. Sears, "Electron Beam Deflection Tube for Pulse Code Modulation," Bell Sys. Tech. J., Vol. 27 pp. 44–57
  4. ^ W. M. Goodall, "Television by Pulse Code Modulation," Bell Sys. Tech. J., Vol. 30 pp. 33–49, 1951.
  5. ^ "Bernard Oliver". National Inventor's Hall of Fame. http://www.invent.org/hall_of_fame/211.html. Retrieved 6 Feb. 2011. 
  6. ^ "Claude Shannon". National Inventor's Hall of Fame. http://www.invent.org/hall_of_fame/212.html. Retrieved 6 Feb. 2011. 
  7. ^ "National Inventors Hall of Fame announces 2004 class of inventors". Science Blog. February 11, 2004. http://www.scienceblog.com/community/older/2004/6/20045378.shtml. Retrieved 6 Feb. 2011. 
  8. ^ B. M. Oliver, J. R. Pierce, and C. E. Shannon (Nov. 1948). "The Philosophy of PCM". Proceeding of the IRE 36 (11): 1324–1331. doi:10.1109/JRPROC.1948.231941. ISSN 0096-8390. http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1697556. 
  9. ^ "Linear Pulse Code Modulated Audio (LPCM)". The Library of Congress. http://www.digitalpreservation.gov/formats/fdd/fdd000011.shtml. Retrieved 2010-03-21. 
  10. ^ Stallings, William, Digital Signaling Techniques, December 1984, Vol. 22, No. 12, IEEE Communications Magazine

Further reading

  • Franklin S. Cooper; Ignatius Mattingly (1969). "Computer-controlled PCM system for investigation of dichotic speech perception". Journal of the Acoustical Society of America 46: 115. doi:10.1121/1.1972688. 
  • Ken C. Pohlmann (1985). Principles of Digital Audio (2nd ed.). Carmel, Indiana: Sams/Prentice-Hall Computer Publishing. ISBN 0-672-22634-0. 
  • D. H. Whalen, E. R. Wiley, Philip E. Rubin, and Franklin S. Cooper (1990). "The Haskins Laboratories pulse code modulation (PCM) system". Behavior Research Methods, Instruments, and Computers 22 (6): 550–559. doi:10.3758/BF03204440. 
  • Bill Waggener (1995). Pulse Code Modulation Techniques (1st ed.). New York, NY: Van Nostrand Reinhold. ISBN 0-442-01436-8. 
  • Bill Waggener (1999). Pulse Code Modulation Systems Design (1st ed.). Boston, MA: Artech House. ISBN 0-89006-776-7. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Pulse Code Modulation — Modulation d impulsion codée Pour les articles homonymes, voir PCM. La modulation d impulsion codée ou MIC, (en anglais Pulse Code Modulation, généralement abrégé en PCM) est une représentation numérique non compressée d un signal analogique via… …   Wikipédia en Français

  • Pulse Code Modulation — Pulse Code Modulation,   PCM Verfahren …   Universal-Lexikon

  • Pulse-Code-Modulation — Pulse Code Modulation,   Abkürzung PCM [englisch, pʌlskəʊdmdjʊ leɪʃn], grundlegendes Verfahren für die digitale Klangspeicherung (Compact Disc, Compact Disc, Digital Audiotape, HD Recording, Klangsynthese, Sampling). Nach einer festgelegten Norm… …   Universal-Lexikon

  • Pulse Code Modulation — Die Puls Code Modulation ist ein Verfahren, um ein analoges Signal in ein digitales Signal bzw. Binärcode umzusetzen. Es wird für Audio und Video Signale verwendet. Die Umsetzung erfolgt in folgenden Schritten: Abtastung des analogen Signals… …   Deutsch Wikipedia

  • pulse-code modulation — /puls kohd /, Telecommunications. a form of modulation that transforms a wave form, as an audio signal, into a binary signal in which information is conveyed by a coded order of pulses for transmission, storage on a disk, or processing by a… …   Useful english dictionary

  • pulse-code modulation — kodinis impulsinis moduliavimas statusas T sritis automatika atitikmenys: angl. pulse code modulation vok. Pulskodemodulation, f rus. импульсно кодовая модуляция, f; кодово импульсная модуляция, f pranc. modulation par impulsions codées, f;… …   Automatikos terminų žodynas

  • pulse-code modulation telephone exchange — impulsinio kodinio moduliavimo telefono stotis statusas T sritis radioelektronika atitikmenys: angl. pulse code modulation telephone exchange vok. Puls Kode Modulation Vermittlungsstelle, f rus. телефонная станция с импульсно кодовой модуляцией,… …   Radioelektronikos terminų žodynas

  • pulse-code modulation —    (PCM)    Modulation of an analog signal in accordance with a specific code …   IT glossary of terms, acronyms and abbreviations

  • pulse code modulation — noun : modulation of a radio wave or signal in which the intelligence is conveyed by a code or order of pulses of the wave that are usually all of the same size and shape and that are transmitted at multiples of a standard time interval …   Useful english dictionary

  • pulse-code modulation — /puls kohd /, Telecommunications. a form of modulation that transforms a wave form, as an audio signal, into a binary signal in which information is conveyed by a coded order of pulses for transmission, storage on a disk, or processing by a… …   Universalium

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”