Magneto-optic effect

Magneto-optic effect

A magneto-optic effect is any one of a number of phenomena in which an electromagnetic wave propagates through a medium that has been altered by the presence of a quasistatic magnetic field. In such a material, which is also called gyrotropic or gyromagnetic, left- and right-rotating elliptical polarizations can propagate at different speeds, leading to a number of important phenomena. When light is transmitted through a layer of magneto-optic material, the result is called the Faraday effect: the plane of polarization can be rotated, forming a Faraday rotator. The results of reflection from a magneto-optic material are known as the magneto-optic Kerr effect (not to be confused with the nonlinear Kerr effect).

In general, magneto-optic effects break time reversal symmetry locally (i.e. when only the propagation of light, and not the source of the magnetic field, is considered) as well as Lorentz reciprocity, which is a necessary condition to construct devices such as optical isolators (through which light passes in one direction but not the other). (The other, less useful, way to break time reversal symmetry is to rely upon absorption loss.)

Two gyrotropic materials with reversed rotation directions of the two principal polarizations, corresponding to complex-conjugate ε tensors for lossless media, are called optical isomers.

Contents

Gyrotropic permittivity

In particular, in a magneto-optic material the presence of a magnetic field (either externally applied or because the material itself is ferromagnetic) can cause a change in the permittivity tensor ε of the material. The ε becomes anisotropic, a 3×3 matrix, with complex off-diagonal components, depending of course on the frequency ω of incident light. If the absorption losses can be neglected, ε is a Hermitian matrix. The resulting principal axes become complex as well, corresponding to elliptically-polarized light where left- and right-rotating polarizations can travel at different speeds (analogous to birefringence).

More specifically, for the case where absorption losses can be neglected, the most general form of Hermitian ε is:

\varepsilon = \begin{pmatrix}
\varepsilon_{xx}' & \varepsilon_{xy}' + i g_z & \varepsilon_{xz}' - i g_y \\
\varepsilon_{xy}' - i g_z & \varepsilon_{yy}' & \varepsilon_{yz}' + i g_x \\
\varepsilon_{xz}' + i g_y & \varepsilon_{yz}' - i g_x & \varepsilon_{zz}' \\
\end{pmatrix}

or equivalently the relationship between the displacement field D and the electric field E is:

\mathbf{D} = \varepsilon \mathbf{E} = \varepsilon' \mathbf{E} + i \mathbf{E} \times \mathbf{g}

where ε' is a real symmetric matrix and \mathbf{g} = (g_x,g_y,g_z) is a real pseudovector called the gyration vector, whose magnitude is generally small compared to the eigenvalues of ε'. The direction of g is called the axis of gyration of the material. To first order, g is proportional to the applied magnetic field:

\mathbf{g} = \varepsilon_0 \chi^{(m)} \mathbf{H}

where \chi^{(m)} \! is the magneto-optical susceptibility (a scalar in isotropic media, but more generally a tensor). If this susceptibility itself depends upon the electric field, one can obtain a nonlinear optical effect of magneto-optical parametric generation (somewhat analogous to a Pockels effect whose strength is controlled by the applied magnetic field).

The simplest case to analyze is the one in which g is a principal axis (eigenvector) of ε', and the other two eigenvalues of ε' are identical. Then, if we let g lie in the z direction for simplicity, the ε tensor simplifies to the form:

\varepsilon = \begin{pmatrix}
\varepsilon_1 & + i g_z & 0 \\
 - i g_z & \varepsilon_1 & 0 \\
0 & 0 & \varepsilon_2 \\
\end{pmatrix}

Most commonly, one considers light propagating in the z direction (parallel to g). In this case the solutions are elliptically polarized electromagnetic waves with phase velocities 1 / \sqrt{\mu(\varepsilon_1 \pm g_z)} (where μ is the magnetic permeability). This difference in phase velocities leads to the Faraday effect.

For light propagating purely perpendicular to the axis of gyration, the properties are known as the Cotton-Mouton effect and used for a Circulator.

Kerr Rotation and Kerr Ellipticity

Kerr Rotation and Kerr Ellipticity are changes in the polarization of incident light which comes in contact with a gyromagnetic material. Kerr Rotation is a rotation in the angle of transmitted light, and Kerr Ellipticity is the ratio of the major to minor axis of the ellipse traced out by elliptically polarized light on the plane through which it propagates. Changes in the orientation of polarized incident light can be quantified using these two properties.

Circular Polarized Light

According to classical physics, the speed of light varies with the permittivity of a material:

v_p = \frac{1}{\sqrt{\epsilon \mu}}

where vp is the velocity of light through the material, \epsilon is the material permittivity, and μ is the material permeability. Because the permittivity is anisotropic, polarized light of different orientations will travel at different speeds.

This can be better understood if we consider a wave of light that is circularly polarized (seen to the right). If this wave interacts with a material at which the horizontal component (green sinusoid) travels at a different speed than the vertical component (blue sinusoid), the two components will fall out of the 90 degree phase difference (required for circular polarization) changing the Kerr Ellipticity.

A change in Kerr Rotation is most easily recognized in linearly polarized light, which can be separated into two Circularly polarized components: Left-Handed Circular Polarized (LCP) light and Right-Handed Circular Polarized (RCP) light. The anisotropy of the Magneto Optic material permittivity causes a difference in the speed of LCP and RCP light, which will cause a change in the angle of polarized light. Materials that exhibit this property are known as Birefringent

From this rotation, we can calculate the difference in orthogonal velocity components, find the anisotropic permittivity, find the gyration vector, and calculate the applied magnetic field \mathbf{H}.

See also

References

  • Federal Standard 1037C and from MIL-STD-188
  • L. D. Landau and E. M. Lifshitz, Electrodynamics of Continuous Media (Addison-Wesley: Reading, MA, 1960). §82.
  • J. D. Jackson, Classical Electrodynamics (3rd. ed) (Wiley: New York, 1998). §6.10.
  • F. Jonsson and C. Flytzanis, "Optical parametric generation and phase matching in magneto-optic media," Optics Letters 24 (21), 1514-1516 (1999).
  • P. S. Pershan, "Magneto-optical effects," J. Applied Physics 38 (3), 1482–1490 (1967). (Review article.)
  • Marvin J. Freiser, "A survey of magnetooptic effects," IEEE Transactions on Magnetics MAG-4 (2), 152–161 (1968). (Review article.)

 This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C".


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • magneto-optic effect — magnetooptinis reiškinys statusas T sritis fizika atitikmenys: angl. magneto optic effect; magneto optical effect vok. magnetooptischer Effekt, m rus. магнитооптический эффект, m pranc. effet magnéto optique, m …   Fizikos terminų žodynas

  • magneto-optical effect — magnetooptinis reiškinys statusas T sritis fizika atitikmenys: angl. magneto optic effect; magneto optical effect vok. magnetooptischer Effekt, m rus. магнитооптический эффект, m pranc. effet magnéto optique, m …   Fizikos terminų žodynas

  • Magneto-optic Kerr effect — (MOKE) is one of the magneto optic effects. It describes the changes of light reflected from magnetized media. Several grains of NdFeB with magnetic domains made visible via contrast with a Kerr microscope. Contents …   Wikipedia

  • magneto-optic —  ̷ ̷| ̷ ̷ ̷ ̷| ̷ ̷ ̷ ̷ adjective also magneto optical  ̷ ̷| ̷ ̷ ̷ ̷| ̷ ̷ ̷ ̷ ̷ ̷ Etymology: magnet + optic, optical : relating to the influence of a magnetic field upon light (as in the Faraday effect and the Kerr effect) …   Useful english dictionary

  • Magneto-optischer Kerr-Effekt — Der Magnetooptische Kerr Effekt (MOKE) aus der Magnetooptik beschreibt eine Drehung der Polarisationsebene von Licht, das an ferromagnetischen Metalloberflächen reflektiert wird. Der Drehwinkel ist abhängig von der Magnetisierung der Probe. Der… …   Deutsch Wikipedia

  • Magneto-optical drive — A Magneto optical disc and the numerous rectangles on its surface. A magneto optical drive is a kind of optical disc drive capable of writing and rewriting data upon a magneto optical disc. Both 130 mm (5.25 in) and 90 mm… …   Wikipedia

  • QMR effect — Quadratic Magnetic Rotation of Polarization of Light is called also QMR or QMR effect.QMR is a type of magneto optic effect, discovered in the mid 1980 s by a team of Ukrainian physicists. QMR, like the Faraday effect, establishes a relationship… …   Wikipedia

  • effet magnéto-optique — magnetooptinis reiškinys statusas T sritis fizika atitikmenys: angl. magneto optic effect; magneto optical effect vok. magnetooptischer Effekt, m rus. магнитооптический эффект, m pranc. effet magnéto optique, m …   Fizikos terminų žodynas

  • Kerr effect — This article is about the Kerr nonlinear optical effect. For the magneto optic phenomenon of the same name, see magneto optic Kerr effect. The Kerr effect, also called the quadratic electro optic effect (QEO effect), is a change in the refractive …   Wikipedia

  • Faraday effect — In physics, the Faraday effect or Faraday rotation is a magneto optical phenomenon, or an interaction between light and a magnetic field in a dielectric material. The rotation of the plane of polarization is proportional to the intensity of the… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”