Electromagnetic interference control
- Electromagnetic interference control
In telecommunication, electromagnetic interference control (EMI) is the control of radiated and conducted energy such that emissions that are unnecessary for system, subsystem, or equipment operation are reduced, minimized, or eliminated.
"Note:" Electromagnetic radiated and conducted emissions are controlled regardless of their origin within the system, subsystem, or equipment. Successful EMI control with effective susceptibility control leads to electromagnetic compatibility.
Source: From Federal Standard 1037C and from MIL-STD-188
ee also
* Radio resource management
Wikimedia Foundation.
2010.
Look at other dictionaries:
Electromagnetic interference — RIV redirects here. For other uses, see RIV (disambiguation). Electromagnetic interference in analog TV signal Electromagnetic interference (or EMI, also called radio frequency interference or RFI) is disturbance that affects an electrical… … Wikipedia
Electromagnetic compatibility — (EMC) is the branch of electrical sciences which studies the unintentional generation, propagation and reception of electromagnetic energy with reference to the unwanted effects (Electromagnetic Interference, or EMI) that such energy may induce.… … Wikipedia
IEEE Electromagnetic Compatibility Society — Infobox Organization name = IEEE Electromagnetic Compatibility Society image border = size = caption = formation = 1957 type = location = membership = language = English leader title = leader name = key people = num staff = budget = website =… … Wikipedia
Electromagnetic radiation and health — Electromagnetic radiation can be classified into ionizing radiation and non ionizing radiation, based on whether it is capable of ionizing atoms and breaking chemical bonds. Ultraviolet and higher frequencies, such as X rays or gamma rays are… … Wikipedia
Electromagnetic radiation — Electromagnetism Electricity · … Wikipedia
Interference (wave propagation) — Two point interference in a ripple tank. In physics, interference is the phenomenon in which two waves superpose each other to form a resultant wave of greater or lower amplitude. Interference usually refers to the interaction of waves that are… … Wikipedia
Television interference (electrical interference) — Television interference is a particular case of electromagnetic interference which affects television reception. Many natural and man made phenomena can disrupt the reception of television signals. These include naturally occurring and artificial … Wikipedia
Aircraft flight control systems — consist of flight control surfaces, the respective cockpit controls, connecting linkages, and the necessary operating mechanisms to control an aircraft s direction in flight. Aircraft engine controls are also considered as flight controls as they … Wikipedia
Tone control circuits — are electronic circuits used to modify an audio signal before it is fed to speakers, headphones or recording devices by way of an amplifier. They are akin to and sometimes called filters. In their most basic form, they elevate or attenuate the… … Wikipedia
Process control network — A Process Control Network (PCN) is a communications network that is used to transmit instructions and data between control and measurement units and Supervisory Control and Data Acquisition (SCADA) equipment.These networks have, over the years,… … Wikipedia
