Eddy current


Eddy current

Eddy currents (also called Foucault currents[1]) are currents induced in conductors when a conductor is exposed to a changing magnetic field; due to relative motion of the field source and conductor or due to variations of the field with time. This can cause a circulating flow of electrons, or current, within the body of the conductor. These circulating eddies of current have inductance and thus induce magnetic fields. These fields can cause repulsive, attractive,[2] propulsion and drag effects. The stronger the applied magnetic field, or the greater the electrical conductivity of the conductor, or the faster the field changes, then the greater the currents that are developed and the greater the fields produced.

The term eddy current comes from analogous currents seen in water when dragging an oar breadthwise: localised areas of turbulence known as eddies give rise to persistent vortices. Somewhat analogously, eddy currents can take time to build up and can persist for very short times in conductors due to their inductance.

Eddy currents, like all electric currents, generate heat as well as electromagnetic forces. The heat can be harnessed for induction heating. The electromagnetic forces can be used for levitation, creating movement, or to give a strong braking effect. Eddy currents can also have undesirable effects, for instance power loss in transformers. In this application, they are minimised with thin plates, by lamination of conductors or other details of conductor shape.

Self-induced eddy currents are responsible for the skin effect in conductors.[3] The latter can be used for non-destructive testing of materials for geometry features, like micro-cracks.[4] A similar effect is the proximity effect, which is caused by externally-induced eddy currents.[5]

Contents

History

The first person to observe current eddies was François Arago (1786–1853), the 25th Prime Minister of France, who was also a mathematician, physicist and astronomer. In 1824 he observed what has been called rotatory magnetism, and the fact that most conductive bodies could be magnetized; these discoveries were completed and explained by Michael Faraday (1791–1867).

In 1834, Heinrich Lenz stated Lenz's law, which says that the direction of induced current flow in an object will be such that its magnetic field will oppose the magnetic field that caused the current flow. Eddy currents develop secondary flux that cancels a part of the external flux.

French physicist Léon Foucault (1819–1868) is credited with having discovered Eddy currents. In September, 1855, he discovered that the force required for the rotation of a copper disc becomes greater when it is made to rotate with its rim between the poles of a magnet, the disc at the same time becoming heated by the eddy current induced in the metal. The first use of eddy current for Non-destructive testing occurred in 1879 when D. E. Hughes used the principles to conduct metallurgical sorting tests.[6]

Explanation

As the circular plate moves down through a small region of constant magnetic field directed into the page, eddy currents are induced in the plate. The direction of those currents is given by Lenz's law, i.e. so that the plate's movement is hindered.

When a conductor moves relative to the field generated by a source, electromotive forces (EMFs) can be generated around loops within the conductor. These EMFs acting on the resistivity of the material generate a current around the loop, in accordance with Faraday's law of induction. These currents dissipate energy, and create a magnetic field that tends to oppose changes in the current- they have inductance.

Eddy currents are created when a conductor experiences changes in the magnetic field. If either the conductor is moving through a steady magnetic field, or the magnetic field is changing around a stationary conductor, eddy currents will occur in the conductor. Both effects are present when a conductor moves through a varying magnetic field, as is the case at the top and bottom edges of the magnetized region shown in the diagram. Eddy currents will be generated wherever a conducting object experiences a change in the intensity or direction of the magnetic field at any point within it, and not just at the boundaries.

The swirling current set up in the conductor is due to electrons experiencing a Lorentz force that is perpendicular to their motion. Hence, they veer to their right, or left, depending on the direction of the applied field and whether the strength of the field is increasing or declining. The resistivity of the conductor acts to damp the amplitude of the eddy currents, as well as straighten their paths. Lenz's law encapsulates the fact that the current swirls in such a way as to create an induced magnetic field that opposes the phenomenon that created it. In the case of a varying applied field, the induced field will always be in the opposite direction to that applied. The same will be true when a varying external field is increasing in strength. However, when a varying field is falling in strength, the induced field will be in the same direction as that originally applied, in order to oppose the decline.

An object or part of an object experiences steady field intensity and direction where there is still relative motion of the field and the object (for example in the center of the field in the diagram), or unsteady fields where the currents cannot circulate due to the geometry of the conductor. In these situations charges collect on or within the object and these charges then produce static electric potentials that oppose any further current. Currents may be initially associated with the creation of static potentials, but these may be transitory and small.

Eddy currents generate resistive losses that transform some forms of energy, such as kinetic energy, into heat. This Joule heating reduces efficiency of iron-core transformers and electric motors and other devices that use changing magnetic fields. Eddy currents are minimized in these devices by selecting magnetic core materials that have low electrical conductivity (e.g., ferrites) or by using thin sheets of magnetic material, known as laminations. Electrons cannot cross the insulating gap between the laminations and so are unable to circulate on wide arcs. Charges gather at the lamination boundaries, in a process analogous to the Hall effect, producing electric fields that oppose any further accumulation of charge and hence suppressing the eddy currents. The shorter the distance between adjacent laminations (i.e., the greater the number of laminations per unit area, perpendicular to the applied field), the greater the suppression of eddy currents.

The conversion of input energy to heat is not always undesirable, however, as there are some practical applications. One is in the brakes of some trains known as eddy current brakes. During braking, the metal wheels are exposed to a magnetic field from an electromagnet, generating eddy currents in the wheels. The eddy currents meet resistance as charges flow through the metal, thus dissipating energy as heat, and this acts to slow the wheels down. The faster the wheels are spinning, the stronger the effect, meaning that as the train slows the braking force is reduced, producing a smooth stopping motion. Induction heating makes use of eddy currents to provide heating of metal objects.

Strength of eddy currents

Under certain assumptions (uniform material, uniform magnetic field, no skin effect, etc.) the power lost due to eddy currents can be calculated from the following equations:[7]

For thin sheets: P = \frac{\pi^2 B_p^2 d^2 f^2 }{6 \rho D}.

For thin wires: P = \frac{\pi^2 B_p^2 d^2 f^2 }{12 \rho D}

where: P - power dissipation (W/kg), Bp - peak flux density (T), d - thickness of the sheet or diameter of the wire (m), f - frequency (Hz), ρ - resistivity (Ωm), D - specific density (kg/m3).

It should be borne in mind that these equations are valid only under the so-called "quasi-static" conditions, where the frequency of magnetisation does not result in the skin effect, i.e. the electromagnetic wave fully penetrates the material.

Therefore, the following things usually increase the size and effects of eddy currents:

  • stronger magnetic fields - increases flux density B
  • faster changing fields (due to faster relative speeds or otherwise) - increases the frequency f
  • thicker materials - increases the thickness d
  • lower resistivity materials (aluminium, copper, silver etc.)

Some things reduce the effects:

  • weaker magnets - lower B
  • slower changing fields (slower relative speeds) - lower f
  • thinner materials - lower d
  • slotted materials so that currents cannot circulate - reduced d or coefficient in the denominator (6, 12, etc.)
  • laminated materials so that currents cannot circulate - reduced d
  • higher resistance materials (silicon rich iron etc.)

Skin effect

In very fast changing fields due to skin effect the equations shown above are not valid because the magnetic field does not penetrate the material uniformly. However, in any case increased frequency of the same value of field will always increase eddy currents, even with non-uniform field penetration.

The penetration depth can be calculated from the following equation:

\delta = \frac{1}{\sqrt{\pi f \mu \sigma}}[8]

where: δ - penetration depth (m),[9] f - frequency (Hz), μ - magnetic permeability (H/m), σ - electrical conductivity (S/m)

Applications

Repulsive effects and levitation

In a fast varying magnetic field the induced currents, in good conductors, particularly copper and aluminium, frequently exhibit diamagnetic-like repulsion effects on the magnetic field, and hence on the magnet and can create repulsive effects and even stable levitation, albeit with reasonably high power dissipation due to the high currents this entails.

They can thus be used to induce a magnetic field in aluminum cans, which allows them to be separated easily from other recyclables (see also eddy current separator). With a very strong handheld magnet, such as those made from neodymium, one can easily observe a very similar effect by rapidly sweeping the magnet over a coin with only a small separation. Depending on the strength of the magnet, identity of the coin, and separation between the magnet and coin, one may induce the coin to be pushed slightly ahead of the magnet - even if the coin contains no magnetic elements, such as the US penny. Another example involves dropping a strong magnet down a tube of copper[10] -- the magnet falls at a dramatically slow pace.

Perfect conductors allow lossless conduction that allows eddy currents to form on the surface of the conductor that exactly cancel any changes in the magnetic field applied to the object after the material's resistance went to zero, thus allowing magnetic levitation. Superconductors are a subclass of perfect conductors in that they also exhibit the Meissner Effect, an inherently quantum mechanical phenomenon that is responsible for expelling any magnetic field lines present during the superconducting transition, thus making the magnetic field zero in the bulk of the superconductor.

Attractive effects

In some geometries the overall force of eddy currents can be attractive, for example, where the flux lines are past 90 degrees to a surface, the induced currents in a nearby conductor cause a force that pushes a conductor towards an electromagnet.[2]

Identification of metals

In coin operated vending machines, eddy currents are used to detect counterfeit coins, or slugs. The coin rolls past a stationary magnet, and eddy currents slow its speed. The strength of the eddy currents, and thus the retardation, depends on the conductivity of the coin's metal. Slugs are slowed to a different degree than genuine coins, and this is used to send them into the rejection slot.

Vibration | Position Sensing

Eddy currents are used in certain types of proximity sensors to observe the vibration and position of rotating shafts within their bearings. This technology was originally pioneered in the 1930s by researchers at General Electric using vacuum tube circuitry. In the late 1950s, solid-state versions were developed by Donald E. Bently at Bently Nevada Corporation. These sensors are extremely sensitive to very small displacements making them well suited to observe the minute vibrations (on the order of several thousandths of an inch) in modern turbomachinery. A typical proximity sensor used for vibration monitoring has a scale factor of 200 mV/mil. Widespread use of such sensors in turbomachinery has led to development of industry standards that prescribe their use and application. Examples of such standards are American Petroleum Institute (API) Standard 670 and ISO 7919.

Electromagnetic braking

Braking forces resulting from eddy currents in a metal plate moving through an external magnetic field

Eddy currents are used for braking at the end of some roller coasters. This mechanism has no mechanical wear and produces a very precise braking force. Typically, heavy copper plates extending from the car are moved between pairs of very strong permanent magnets. Electrical resistance within the plates causes a dragging effect analogous to friction, which dissipates the kinetic energy of the car. The same technique is used in electromagnetic brakes in railroad cars and to quickly stop the blades in power tools such as circular saws.

Structural testing

Eddy current techniques are commonly used for the nondestructive examination (NDE) and condition monitoring of a large variety of metallic structures, including heat exchanger tubes, aircraft fuselage, and aircraft structural components..

Side effects

Eddy currents are the root cause of the skin effect in conductors carrying AC current.

Similarly, in magnetic materials of finite conductivity eddy currents cause the confinement of the majority of the magnetic fields to only a couple skin depths of the surface of the material. This effect limits the flux linkage in inductors and transformers having magnetic cores.

Other applications

Diffusion Equation

The derivation of a useful equation for modeling the effect of eddy currents in a material starts with the differential, magnetostatic form of Ampère's Law,[14] providing an expression for the magnetic field H surrounding a current density J,

\nabla \times \mathbf{H} = \mathbf{J}.

The curl is taken on both sides of the equation,

\nabla \times \left(\nabla \times \mathbf{H} \right) = \nabla \times \mathbf{J},

and using a common vector calculus identity for the curl of the curl results in

\nabla \left( \nabla \cdot \mathbf{H} \right) - \nabla^2\mathbf{H} = \nabla \times \mathbf{J}.

From Gauss's law for magnetism, \nabla \cdot \mathbf{H} = 0, which drops a term from the expression and gives

-\nabla^2\mathbf{H}=\nabla\times\mathbf{J}.

Using Ohm's law, \mathbf{J}=\sigma \boldsymbol{\Epsilon}, which relates current density J to electric field Ε in terms of a material's conductivity σ, and assuming isotropic homogeneous conductivity, the equation can be written as

-\nabla^2\mathbf{H}=\sigma\nabla\times\boldsymbol{\Epsilon}.

The differential form of Faraday's law, \nabla \times \boldsymbol{\Epsilon} = -\frac{\partial \mathbf{B}}{\partial t}, provides an equivalence for the change in magnetic flux B in place of the curl of the electric field, so that the equation can be simplified to

\nabla^2\mathbf{H} = \sigma \frac{\partial \mathbf{B}}{\partial t}.

By definition, \mathbf{B}=\mu_0\left(\mathbf{H}+\mathbf{M}\right), where M is the magnetization of a material, μ0 is the vacuum permeability, and the diffusion equation finally appears as

\nabla^2\mathbf{H} = \mu_0 \sigma \left( \frac{\partial \mathbf{M} }{\partial t}+\frac{\partial \mathbf{H}}{\partial t} \right).

References

  1. ^ http://books.google.com/books?id=6w5TAAAAMAAJ&q=foucault+currents&dq=foucault+currents&hl=en&ei=AFKbTLm0G47KjAf7uYnyCQ&sa=X&oi=book_result&ct=result&resnum=5&ved=0CDYQ6AEwBDgK
  2. ^ a b linear Electric Machines- A Personal View ERIC R. LAITHWAITE
  3. ^ http://books.google.com/books?id=E8caSplsF28C&pg=PA73
  4. ^ http://books.google.com/books?id=ZvscLzOlkNgC&pg=PA570
  5. ^ http://books.google.com/books?id=mMJxcWqm_1oC&pg=PA80
  6. ^ Short research about the history of eddy current
  7. ^ F. Fiorillo, Measurement and characterisation of magnetic materials, Elsevier Academic Press, 2004, ISBN 0-12-257251-3, page. 31
  8. ^ http://www.ndt-ed.org/EducationResources/CommunityCollege/EddyCurrents/Physics/depthcurrentdensity.htm
  9. ^ Seong-Soo Cho, Sang-Beom Kim, Joon-Young Soh, Sang-Ok Han, Effect of Tension Coating on Iron Loss at Frequencies Below 1 kHz in Thin-Gauged 3% Si-Fe Sheets, IEEE Transactions on Magnetics, Vol. 45, No. 10, October 2009, p. 4165-4168
  10. ^ http://www.youtube.com/watch?v=nrw-i5Ku0mI
  11. ^ Hand-Held Instruments - eddy current test method
  12. ^ Measure Sheet Resistance of conductive thin coatings on non-conductive substrates (metallization/ wafers/ ITO / CVD / PVD
  13. ^ Eddy current separator
  14. ^ G. Hysteresis in Magnetism: For Physicists, Materials Scientists, and Engineers, San Diego: Academic Press, 1998.
  • Fitzgerald, A. E.; Kingsley, Charles Jr. and Umans, Stephen D. (1983). Electric Machinery (4th ed. ed.). Mc-Graw-Hill, Inc.. pp. 20. ISBN 0-07-021145-0. 
  • Sears, Francis Weston; Zemansky, Mark W. (1955). University Physics (2nd ed. ed.). Addison-Wesley. pp. 616–618. 

Further reading

  • Stoll, R. L. (1974). The analysis of eddy currents. Oxford University Press. 
  • Krawczyk, Andrzej; J. A. Tegopoulos. Numerical modelling of eddy currents. 

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Eddy current — Ed dy cur rent (Elec.) An induced electric current circulating wholly within a mass of metal; called also {Foucault current}. [Webster 1913 Suppl.] …   The Collaborative International Dictionary of English

  • eddy current — sūkurinė srovė statusas T sritis fizika atitikmenys: angl. eddy current; Foucault current vok. Foucault Strom, m; Wirbelstrom, m rus. вихревой ток, m; ток Фуко, m pranc. courant de Foucault, m; courant tourbillonnaire, m; courant tourbillon, m …   Fizikos terminų žodynas

  • eddy current — an electric current in a conducting material that results from induction by a moving or varying magnetic field. [1590 1600, for an earlier sense] * * * ▪ electronics       in electricity, motion of electric charge induced entirely within a… …   Universalium

  • eddy current — noun An induced electric current formed within the body of a conductor when it is exposed to a time varying magnetic field; utilized in induction heating and in some braking and damping systems. Syn: Foucault current …   Wiktionary

  • eddy current — Foucault current, localized current that develops within a conductor that is moving through a varying magnetic field (Electromagnetism) …   English contemporary dictionary

  • eddy current — /ˈɛdi kʌrənt/ (say edee kuruhnt) noun an electric current induced in a mass of conducting material, especially the iron cores of electromagnets, by a varying magnetic field; Foucault current …   Australian English dictionary

  • eddy current — noun : an electric current induced by an alternating magnetic field in a massive conductor (as the core of an armature or a transformer) called also Foucault current …   Useful english dictionary

  • eddy current — noun Date: 1886 an electric current induced by an alternating magnetic field …   New Collegiate Dictionary

  • eddy current — noun a localized electric current induced in a conductor by a varying magnetic field …   English new terms dictionary

  • Eddy-current testing — uses electromagnetic induction to detect flaws in conductive materials. There are several limitations, among them: only conductive materials can be tested, the surface of the material must be accessible, the finish of the material may cause bad… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.