- Circuit switching
Circuit switching is a methodology of implementing a telecommunications network in which two network nodes establish a dedicated communications channel (circuit) through the network before the nodes may communicate. The circuit guarantees the full bandwidth of the channel and remains connected for the duration of the communication session. The circuit functions as if the nodes were physically connected as with an electrical circuit.
Circuit switching contrasts with packet switching which divides the data to be transmitted into packets transmitted through the network independently. Packet switching shares available network bandwidth between multiple communication sessions.
In circuit switching, the bit delay is constant during a connection, as opposed to packet switching, where packet queues may cause varying packet transfer delay. Each circuit cannot be used by other callers until the circuit is released and a new connection is set up. Even if no actual communication is taking place, the channel remains unavailable to other users. Channels that are available for new calls are said to be idle.
Virtual circuit switching is a packet switching technology that emulates circuit switching, in the sense that the connection is established before any packets are transferred, and packets are delivered in order.
While circuit switching is commonly used for connecting voice circuits, the concept of a dedicated path persisting between two communicating parties or nodes can be extended to signal content other than voice. Its advantage is that it provides for continuous transfer without the overhead associated with packets making maximal use of available bandwidth for that communication. The disadvantage is inflexibility; the connection and the bandwidth associated with it are reserved and unavailable for other uses.
TDM · FDM · SDM
Spatial multiplexing (MIMO)
Packet mode · Dynamic TDM
FHSS · DSSS
OFDMA · SC-FDM · MC-SS
Related topics Channel access methods
Media Access Control (MAC)
For call setup and control (and other administrative purposes), it is possible to use a separate dedicated signalling channel from the end node to the network. ISDN is one such service that uses a separate signalling channel while plain old telephone service (POTS) does not.
The method of establishing the connection and monitoring its progress and termination through the network may also utilize a separate control channel as in the case of links between telephone exchanges which use CCS7 packet-switched signalling protocol to communicate the call setup and control information and use TDM to transport the actual circuit data.
Early telephone exchanges are a suitable example of circuit switching. The subscriber would ask the operator to connect to another subscriber, whether on the same exchange or via an inter-exchange link and another operator. In any case, the end result was a physical electrical connection between the two subscribers' telephones for the duration of the call. The copper wire used for the connection could not be used to carry other calls at the same time, even if the subscribers were in fact not talking and the line was silent.
Compared to datagram packet switching
Circuit switching contrasts with packet switching which divides the data to be transmitted into small units, called packets, transmitted through the network independently. Packet switching shares available network bandwidth between multiple communication sessions.
Multiplexing multiple telecommunications connections over the same physical conductor has been possible for a long time, but nonetheless each channel on the multiplexed link was either dedicated to one call at a time, or it was idle between calls.
In circuit switching, and virtual circuit switching, a route and bandwidth is reserved from source to destination. Circuit switching can be relatively inefficient because capacity is guaranteed on connections which are set up but are not in continuous use, but rather momentarily. However, the connection is immediately available while established.
Packet switching is the process of segmenting a message/data to be transmitted into several smaller packets. Each packet is labeled with its destination and a sequence number for ordering related packets, precluding the need for a dedicated path to help the packet find its way to its destination. Each packet is dispatched independently and each may be routed via a different path. At the destination, the original message is reassembled in the correct order, based on the packet number. Datagram packet switching networks do not require a circuit to be established and allow many pairs of nodes to communicate concurrently over the same channel.
Examples of circuit-switched networks
- public switched telephone network (PSTN)
- ISDN B-channel
- Circuit Switched Data (CSD) and High-Speed Circuit-Switched Data (HSCSD) service in cellular systems such as GSM
- X.21 (Used in the German DATEX-L and Scandinavian DATEX circuit switched data network)
- Packet switching
- Message switching
- Call (telecommunications)
- Clos network
- Time-Driven Switching
- Netheads vs Bellheads by Steve Steinberg
- University of Virginia
- RFC 3489 Some Internet Architectural Guidelines and Philopsophy
Channel access methods and Media access control (MAC)/Multiple-access protocols Channel basedSDMA·· Packet basedDelay & disruption tolerant Duplexing methods
Wikimedia Foundation. 2010.
Look at other dictionaries:
Circuit Switching — [engl.], Leitungsvermittlung … Universal-Lexikon
circuit switching — A temporary communications connection established as required between the sending and receiving nodes. Circuit switching is often used in modem communications over dial up telephone lines. It is also used in some privately maintained… … Dictionary of networking
Circuit switching — Die Leitungsvermittlung (auch Durchschaltevermittlung, engl. circuit switching, line switching) in der Telekommunikation ist ein Verfahren der Vermittlungstechnik, bei dem einer Nachrichtenverbindung zeitweilig ein durchgeschalteter… … Deutsch Wikipedia
circuit switching — grandinių perjungimas statusas T sritis automatika atitikmenys: angl. circuit switching vok. Durchschaltetechnik, f; Leitungsvermittlung, f rus. коммутация цепей, f pranc. commutation de circuits, f … Automatikos terminų žodynas
circuit switching — A communications switching system that completes a circuit from sender to receiver at the time the call for message transmission is initiated. Used when there is a requirement for instantaneous, direct two way communications between terminal… … IT glossary of terms, acronyms and abbreviations
circuit switching — method of communication in which a channel is maintained between the broadcaster and the receiver … English contemporary dictionary
circuit switching network — network which has a dedicated communication path between the sender and receiver … English contemporary dictionary
Switching center — A switching center is a node in a telecommunications Circuit switching network which is connected to either another switching center and/or to end user devices. Switching centers are aware of other centers and possible routes between them such… … Wikipedia
Switching Control Center System — The Switching Control Center System was an Operations Support System developed by Bell Laboratories and deployed during the early 1970s. This computer system was first based on the PDP 11 product line from Digital Equipment Corporation and used… … Wikipedia
switching circuit — perjungimo schema statusas T sritis automatika atitikmenys: angl. commutation circuit; switching circuit; switching network vok. Schaltkreis, m; Schaltnetzwerk, n rus. переключательная схема, f; переключающая схема, f pranc. circuit de… … Automatikos terminų žodynas