Sedimentation (water treatment)


Sedimentation (water treatment)

Sedimentation is a physical water treatment process used to settle out suspended solids in water under the influence of gravity.[1]

Contents

Basics

Suspended solids (or SS), is the mass of dry solids retained by a filter of a given porosity related to the volume of the water sample. This includes particles of a size not lower than 10 μm.

Colloids are particles of a size between 0.001 µm and 1 µm depending on the method of quantification. Due to electrostatic forces balancing the gravity, they are not likely to settle naturally.

The limit sedimentation velocity of a particle is its theoretical descending speed in clear and still water. In settling process theory, a particle will settle only if:

  1. In a vertical ascending flow, the ascending water velocity is lower than the limit sedimentation velocity.
  2. In a longitudinal flow, the ratio of the length of the tank to the height of the tank is higher than the ratio of the water velocity to the limit sedimentation velocity.

There are four types of sedimentation processes:

  • Type 1 - Dilutes, non-flocculent, free-settling. (Every particle settles independently.)
  • Type 2 - Dilute, flocculent. (Particles can flocculate as they settle.)
  • Type 3 - Concentrated Suspensions, Zone Settling (Sludge Thickening).
  • Type 4 - Concentrated Suspensions, Compression (Sludge Thickening).

Applications

Potable Water Treatment

Sedimentation in potable water treatment generally follows a step of chemical coagulation and flocculation, which allows grouping particles together into flocs of a bigger size. This increases the settling speed of suspended solids and allows settling colloids.

Waste Water Treatment

Sedimentation tanks are used to treat wastewater since several millenniums (Chatzakis et al., 2006)[2].

Sedimentation is often used as a primary stage in modern waste water treatment plant, reducing the content of suspended solids as well as the pollutant embedded in the suspended solids.[3]:5-9 Due to the large amount of reagent necessary to treat domestic wastewater, preliminary chemical coagulation and flocculation are generally not used, remaining suspended solids being reduced by following stages of the system. However, coagulation and flocculation can be used for building a compact treatment plant (also called a "package treatment plant"), or for further polishing of the treated water.[4]

In the Activated Sludge treatment process, flocs being created through biological activity are collected in sedimentation tanks, generally referred to as Secondary Clarifiers or Secondary Sedimentation Tanks.[3]:13

Technology

Sedimentation tanks can be of different shapes, often rectangular or circular. They are sized in order to have an optimal sedimentation speed. If sedimentation speed is too high, most particles will not have sufficient time to settle, and will be carried with the treated water. If the speed is too low, the tanks will be of an excessive size.

As turbulence is a damaging factor leading settled particles to go back in suspension, several devices are used to ensure a quiet flow, such as carefully designed water inlet with baffles.

Sedimentation may be made more efficient by the use of stacks of flat pieces that slope slightly upwards in the direction of flow, called lamellar separators. They are parallel and separated by a small distance. These structures work in two ways:

  1. They provide a very large surface area onto which particles may fall and become stabilized.
  2. Because flow is temporarily accelerated between the plates and then immediately slows down, this helps to aggregate very fine particles that can settle as the flow exits the plates.

The use of lamellar separators may allow the use of a smaller sedimentation tank and may enable finer particles to be separated. Typically such structures are used for difficult-to-treat waters, especially those containing colloidal materials.

See also

References

  1. ^ "IngentaConnect Coagulation and sedimentation in lakes, reservoirs and water treatment". www.ingentaconnect.com. http://www.ingentaconnect.com/content/els/02731223/1998/00000037/00000002/art00018. Retrieved 2008-03-27. 
  2. ^ Chatzakis, M.K., Lyrintzis, A.G., Mara, D.D., and Angelakis, A.N., 2006, Sedimentation Tanks through the Ages, Proceedings of the 1st IWA International Symposium on Water and Wastewater Technologies in Ancient Civilizations, Iraklio, Greece, 28-30 October 2006, pp. 757-762
  3. ^ a b U.S. Environmental Protection Agency (EPA). Washington, DC (2004). "Primer for Municipal Wastewater Treatment Systems." Document no. EPA 832-R-04-001.
  4. ^ EPA. Washington, DC (2000). "Package Plants." Wastewater Technology Fact Sheet. Document no. EPA 832-F-00-016.

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • List of waste water treatment technologies — The following page consist of a list of waste water treatment technologies: * Activated sludge systems [ [http://www.oost vlaanderen.be/docs/nl/gc/35447.%20afvalwaterzuivering%20op%20landbouwbedrijven.pdf Overview of activated sludge system with… …   Wikipedia

  • Water cleaning — may refer to: Contents 1 Wastewater treatment 2 Purification 3 Other meanings 4 See also Wastewater treatment …   Wikipedia

  • Water purification — This article is about large scale, municipal water purification. For portable/emergency water purification, see portable water purification. For industrial water purification, see deionized water. For distilled water, see distilled water. Water… …   Wikipedia

  • Water supply and sanitation in Pakistan — Drinking water qualityGenerally, water pressure is low in Pakistani supply systems. Together with leaky pipes, this has led to infiltration of contaminated water. As a result of sewage and industrial waste, which leaked into drinking water… …   Wikipedia

  • water-supply system — Facilities for the collection, treatment, storage, and distribution of water. Ancient systems included wells, storage reservoirs, canals and aqueducts, and water distribution systems. Highly advanced systems appeared с 2500 BC and reached their… …   Universalium

  • water purification — ▪ public health  treatment of water to make it safe and acceptable for human use. Such treatment grew vastly in importance in the 20th century because of the growth of cities and development of industry and, consequently, of pollution.       A… …   Universalium

  • Water supply in Hong Kong — Providing an adequate water supply for Hong Kong has always been difficult because there are few natural lakes, rivers or substantial groundwater sources and of its high population density. Although the annual rainfall averages 2 214.3… …   Wikipedia

  • Water resources management in Peru — Source : INRENAtorage capacity and infrastructureIn 1980, INRENA established an inventory of Peru s water storage capacity, including lakes and dams. Peru has 12,201 lakes, 3,896 of which are located in the Pacific basin, 7,441 in the Atlantic… …   Wikipedia

  • sedimentation tank — ▪ sewage treatment also called  Settling Tank,         component of a modern sewage treatment system. In a large metropolitan system, waste water is passed through a series of tanks following coarse screening to remove large objects. Grit… …   Universalium

  • Industrial wastewater treatment — covers the mechanisms and processes used to treat waters that have been contaminated in some way by anthropogenic industrial or commercial activities prior to its release into the environment or its re use.Most industries produce some wet waste… …   Wikipedia