Balanced line

Balanced line

In telecommunications and professional audio, a balanced line or balanced signal pair is a transmission line consisting of two conductors of the same type, and equal impedance to ground and other circuits. [Young EC, "The Penguin Dictionary of Electronics", 1988, ISBN 0140511873]

Balanced lines are often operated with differential signals, one of which is the inverse of the other. External interfering sources, when present, tend to induce a common mode signal on the line.

The balanced impedances to ground minimizes interference pickup. The conductors are sometimes twisted together to ensure that each conductor is equally exposed to any external magnetic fields that would induce unwanted noise. The line is capable of being operated in such a way that when the impedances of the two conductors at all transverse planes are equal in magnitude and opposite in polarity with respect to ground, the currents in the two conductors are equal in magnitude and opposite in direction.

Transmission lines are generally unbalanced or balanced. "Unbalanced" are usually coaxial cable while "balanced" are twin-lead for radio frequency signals or twisted pair for lower frequencies. A balun may be used to connect the two kinds.


Some balanced lines also have electromagnetic shielding to reduce the amount of noise introduced.


Classically, both dynamic and condenser microphones used transformers to provide a differential-mode signal. While transformers are still used in the large majority of modern dynamic microphones, more recent condenser microphones are more likely to use electronic drive circuitry. Each leg, irrespective of any signal, should have an identical impedance to ground. Pair cable (or a pair-derivative such as star-quad) is used to maintain the balanced impedances and close twisting of the cores ensures that any interference is common to both conductors. Providing that the receiving end (usually a mixing console) does not disturb the line balance, and is able to ignore common-mode (noise) signals, and can extract differential ones, then the system will have excellent immunity to induced interference.


Compared to single-wire earth return circuits, balanced lines reduce the amount of noise per distance, allowing a longer cable run to be practical. This is because electromagnetic interference will affect both signals the same way. Similarities between the two signals are automatically removed at the end of the transmission path when one signal is subtracted from the other.

Examples of application

Telephone lines are the most numerous balanced lines.

A rarer example is a microphone connected to a mixer. Typical professional audio sources, such as microphones, have three-pin XLR connectors. One is the ground or common, while the other two are signal connections. These signal wires carry two copies of the same signal, but with opposite polarity. (They are often termed "hot" and "cold," but these are entirely nominal and useful only for keeping a consistent polarity.) Since these conductors travel the same path from source to destination, the assumption is that any interference is induced upon both conductors equally. The appliance receiving the signals compares the difference between the two signals (often with disregard to electrical ground) allowing the appliance to ignore any induced electrical noise. Any induced noise would be present in equal amounts and in identical polarity on each of the balanced signal conductors, so the two signals’ difference from each other would be unchanged. The successful rejection of induced noise from the desired signal depends in part on the balanced signal conductors receiving the same amount and type of interference. This typically leads to twisted, braided, or co-jacketed cables for use in balanced signal transmission.

Balanced and differential

Most explanations of balanced lines assume symmetrical (antiphase) signals but this is an unfortunate confusion - signal symmetry and balanced lines are quite independent of each other. There are balanced drive circuits that have excellent common-mode impedance matching between "legs" but do "not" provide symmetrical signals. [cite web
title=Audio Balancing Issues
author=Graham Blyth
work=Professional Audio Learning Zone
quote=Let’s be clear from the start here: if the source impedance of each of these signals was not identical i.e. balanced, the method would fail completely, the matching of the differential audio signals being irrelevant, though desirable for headroom considerations.
] [cite book
title = Sound system equipment
accessdate = 2007-05-24
edition = Third edition
year = 2000
publisher = International Electrotechnical Commission
location = Geneva
id = IEC 602689-3:2001
pages = p. 111
chapter = Part 3: Amplifiers
quote = Only the common-mode impedance balance of the driver, line, and receiver play a role in noise or interference rejection. This noise or interference rejection property is independent of the presence of a desired differential signal.


* UTP category 5 cable (when used for Ethernet)
* RS-422
* Low-voltage differential signalling (LVDS)
* Microphone cables (only on professional-level systems)


To convert a signal from balanced to unbalanced requires a balun. For example, baluns can be used to send line level audio or E-carrier level 1 signals over coaxial cable (which is unbalanced) through convert|300|ft|m of Category 5 cable by using a pair of baluns at each end of the CAT5 run. The balun takes the unbalanced signal, and creates an inverted copy of that signal. It then sends these 2 signals across the CAT5 cable as a balanced signal. Upon reception at the other end, the balun adds the signals together, thus removing any noise picked up along the way and recreating the unbalanced signal.

See also

* Balanced audio
* Balanced circuit
* Differential pair
* Insert (effects processing)
* Ladder line (balanced transmission line for radio frequencies)

External links

* [ Balanced Lines, Phantom Powering, Grounding, and Other Arcane Mysteries] — from Mackie;
* [ The behaviour of RF balanced transmission lines in a progressive wave regime] ;


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Balanced Line —   [engl.], symmetrische Verbindung …   Universal-Lexikon

  • balanced line — Elect. a transmission line in which the oppositely directed components are symmetrical with respect to each other and to the ground. * * * …   Universalium

  • balanced line — Elect. a transmission line in which the oppositely directed components are symmetrical with respect to each other and to the ground …   Useful english dictionary

  • balanced line — TV Audio cables that have three wires: one for positive, one for negative and one for ground …   Audio and video glossary

  • Balanced audio — is a method of interconnecting audio equipment using impedance balanced lines. This type of connection is very important in sound recording and production because it allows for the use of long cables while reducing susceptibility to external… …   Wikipedia

  • Balanced circuit — See also Balanced line A balanced circuit is a common method of transmitting many types of communication signals between two points on two wires. In a balanced circuit the individual signals on each wire are inverses of each other as referenced… …   Wikipedia

  • Balanced flow — In atmospheric science, balanced flow is an idealisation of atmospheric motion. The idealisation consists in considering the behaviour of one isolated parcel of air having constant density, its motion on a horizontal plane subject to selected… …   Wikipedia

  • Balanced scorecard — The Balanced Scorecard (BSC) is a performance management tool which began as a concept for measuring whether the smaller scale operational activities of a company are aligned with its larger scale objectives in terms of vision and strategy. By… …   Wikipedia

  • Balanced set — In linear algebra and related areas of mathematics a balanced set, circled set or disk in a vector space (over a field K with an absolute value |.|) is a set S so that for all scalars α with |α| ≤ 1 with The balanced hull or balanced envelope for …   Wikipedia

  • balanced control surface — i. A control surface that is aerodynamically balanced to reduce the force necessary to displace it by providing some area ahead of the hinge line. ii. A control surface balanced by weights ahead of its hinge line to reduce possible flutter …   Aviation dictionary

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.