Signal conditioning

Signal conditioning

In electronics, signal conditioning means manipulating an analogue signal in such a way that it meets the requirements of the next stage for further processing. For example, the output of an electronic temperature sensor, which is probably in the millivolts range is probably too low for an Analog-to-digital converter (ADC) to process directly. In this case the signal conditioning is the amplification necessary to bring the voltage level up to that required by the ADC.

In control engineering applications, it is common to have a sensing stage (which consists of a sensor), a signal conditioning stage (where usually amplification of the signal is done) and a processing stage (normally carried out by an ADC and a micro-controller). Operational amplifiers (op-amps) are commonly employed to carry out the amplification of the signal in the signal conditioning stage.

More generally, signal conditioning can include amplification, filtering, converting, and any other processes required to make sensor output suitable for conversion to digital format. It is primarily utilized for data acquisition, in which sensor signals must be normalized and filtered to levels suitable for analog-to-digital conversion so they can be read by computerized devices.

Types of devices that use signal conditioning include signal filters, instrument amplifiers, sample-and-hold amplifiers, isolation amplifiers, signal isolators, multiplexers, bridge conditioners, analog-to-digital converters, digital-to-analog converters, frequency converters or translators, voltage converters or inverters, frequency-to-voltage converters, voltage-to-frequency converters, current-to-voltage converters, current loop converters, and charge converters.

Signal inputs accepted by signal conditioners include DC voltage and current, AC voltage and current, frequency and electric charge. Sensor inputs can be accelerometer, thermocouple, thermistor, RTD, strain gauge or bridge, and LVDT or RVDT. Specialized inputs include encoder, counter or tachometer, timer or clock, relay or switch, and other specialized inputs. Outputs for signal conditioning equipment can be voltage, current, frequency, timer or counter, relay, resistance or potentiometer, and other specialized outputs.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • conditioning — /keuhn dish euh ning/, n. Psychol. 1. Also called operant conditioning, instrumental conditioning. a process of changing behavior by rewarding or punishing a subject each time an action is performed until the subject associates the action with… …   Universalium

  • Signal Hill, California — Infobox Settlement official name = City of Signal Hill, California settlement type = City nickname = motto = imagesize = image caption = image imagesize = image caption = image mapsize = 250x200px map caption = Location of Signal Hill in Los… …   Wikipedia

  • conditioning — According to behaviourism in psychology, conditioning is the way in which new connections between stimulus and response are learned, and therefore forms the basic pattern of learning. It comes in two forms. In classical or Pavlovian conditioning… …   Philosophy dictionary

  • Operant conditioning — is a form of psychological learning during which an individual modifies the occurrence and form of its own behavior due to the association of the behavior with a stimulus. Operant conditioning is distinguished from classical conditioning (also… …   Wikipedia

  • Classical conditioning — This dog was fitted with a cannula to measure the amount of salivation when presented with a certain stimulus, Pavlov Museum, 2005 Classical conditioning (also Pavlovian or respondent conditioning, Pavlovian reinforcement) is a form of… …   Wikipedia

  • Operant conditioning chamber — Skinner box Skinner box with 2 respond levers, 2 cue lights …   Wikipedia

  • Fear conditioning — is the method by which organisms learn to fear new stimuli. It is a form of learning in which fear is associated with a particular neutral context (e.g., a room) or neutral stimulus (e.g., a tone). This can be done by pairing the neutral stimulus …   Wikipedia

  • D conditioning —    A type of conditioning that controls harmonic distortion and signal to noise ratio so that they reside within specified limits …   IT glossary of terms, acronyms and abbreviations

  • SCE — • Signal Conversion Equipment • Structure Chart Editor • Service Control Element • Situation Caused Error ( > IEEE Standard Dictionary ) • Southern California Edison • Signal Conditioning Equipment NASA • State College, PA, USA internationale… …   Acronyms

  • SCDU — Signal Conditioning & Display Unit NASA …   Acronyms

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”