Telescoping bolt

Telescoping bolt
External view of Uzi and MP40 submachineguns, both 9mm submachineguns with a 10" (250mm) barrel, showing size advantage that telescoping mechanism allows
Internal mechanisms of a telescoping bolt and conventional submachinegun. Barrels are blue, bolts are green.

A weapon with a telescoping bolt (also known as an overhung bolt) is one with a bolt which telescopes over, that is, wraps around and past, the breech end of the barrel. This feature reduces the required length of a weapon such as a submachine gun significantly, and it allows rifle designs to be balanced around the pistol grip in a way that gives "pointability" similar to a pistol's.

While it would be simpler and easier to shorten the bolt to fit completely behind the breech, the bolt must have a certain amount of mass in order to operate reliably with a given caliber. The telescoping bolt moves some of that mass forward of the bolt face, resulting in a bolt which is longer overall, but is shorter behind the bolt face.

Though technically a different, distinct concept, nearly all telescoping bolt submachineguns do use an ammunition magazine located in the pistol grip which is used to hold the weapon.

Contents

History

The telescoping bolt concept first appeared on semi-automatic handguns designed by John Browning, such as the M1911-series pistol produced for the U.S. Army. These pistols feature a slide, which acts as both a barrel shroud and the bolt. This allowed Browning to design compact pistols for high-powered cartridges.

The first production model submachinegun using the telescoping bolt concept was the Czechslovakian Cz 23 aka Sa.23 or vz.48b series, first produced in 1948. These submachineguns use a cylindrical telescoping bolt with centered barrel. While widely exported in the third world, the Cz 23 series were not well known in the west. [1]

The popularly well known first example was the Uzi submachine gun, designed in Israel by a designer inspired by the Cz 23 series. This gun has become probably the best known submachinegun of all time. It uses a rectangular bolt, with a barrel which is offset toward the bottom of the bolt. This configuration places the axis of recoil lower, increasing the controllability of the weapon in full-automatic fire. The Uzi was designed in 1948 after first models of the Cz 23 were seen, and entered service in 1951.

Subsequently, the telescoping bolt has been used in a wide variety of submachinegun designs.

Comparisons

As the image diagrams demonstrate, the basic concept of telescoping bolt and magazine well in handgrip produce significantly more compact weapons. These diagrams show the 1938 design (1939 service) MP-40 submachinegun, which is 630 mm (25 inch) long, weighed around 4 kilograms (8.8 pounds) and has a 251 mm (10 inch) barrel, and the similar materials and production technology Uzi, a 1948 design (1951 service), which is 470 mm (19 inch) long with stock folded and weighed 3.5 kilograms (7.7 pounds) and uses a 251 mm (10 inch) barrel.

Utilizing nothing more than a configuration change, and the same materials and fabrication technologies, the Uzi is 500 grams (1 pound) lighter and 160 mm (6 inches) shorter.

Examples

References

  1. ^ Back to the Roots, Monty Mendenhall, at [1], accessed Jan 10, 2007

Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • telescoping bolt —   n.    the bolt of a locking device which extends and retracts by successive overlapping sections …   Locksmith dictionary

  • Blowback (firearms) — Blowback is a system of operation for self loading firearms that obtains energy from the motion of the cartridge case as it is pushed to the rear by expanding gases created by the ignition of the propellant charge.[1] Several types of blowback… …   Wikipedia

  • Uzi — For other uses, see Uzi (disambiguation). IMI Uzi The IMI Uzi submachine gun. Type Submachine Gun Place of  …   Wikipedia

  • MAC-10 — Ingram MAC 10 MAC 10 (.45 ACP) with suppressor and without magazine. Type Machine Pistol Place of origin …   Wikipedia

  • Advanced Primer Ignition — is used in open bolt submachine guns in which the chamber depth is made a few thousands of an inch shorter than the cartridge case s length. This causes the forward moving bolt s fixed firing pin to ignite the primer a moment before the bolt… …   Wikipedia

  • small arm — small armed, adj. Usually, small arms. a firearm designed to be held in one or both hands while being fired: in the U.S. the term is applied to weapons of a caliber of up to one in. (2.5 cm). [1680 90] * * * ▪ military technology Introduction… …   Universalium

  • Beretta M12 — Infobox Weapon name=Berretta Model 12 caption=A Beretta M12 (without magazine) in the hands of a U.S. Marine origin=flag|Italy type=Submachine gun is ranged=yes is UK= service=1961 present used by=See Users wars=Vietnam War, Afghan War, Iraq War… …   Wikipedia

  • Minebea PM-9 — JGSDF MP soldier armed with PM 9. Type Machine pistol Place of origin …   Wikipedia

  • Sa vz. 23 — Infobox Weapon name= CZ Model 25 caption= origin=flagcountry|Czechoslovakia, later flagcountry|Czech Republic type= Submachine gun is ranged=yes service= used by= wars= designer= design date= manufacturer= production date= number= weight= 3.27 kg …   Wikipedia

  • Ruger MP9 — Infobox Weapon is ranged=yes caption= name=Ruger MP9 type=Submachine gun/Machine pistol origin=flagcountry|United States design date= 1995 production date= 1995 service= used by= United States wars= caliber= part length= cartridge=9x19mm… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”