Complex logarithm

Complex logarithm
A single branch of the complex logarithm. The hue of the color is used to show the arg (polar coordinate angle) of the complex logarithm. The saturation (intensity) of the color is used to show the modulus of the complex logarithm. The page with the large version of this picture has an image that shows the encoding of colors as a function of their complex values.

In complex analysis, a complex logarithm function is an "inverse" of the complex exponential function, just as the natural logarithm ln x is the inverse of the real exponential function ex. Thus, a logarithm of z is a complex number w such that ew = z.[1] The notation for such a w is log z. But because every nonzero complex number z has infinitely many logarithms,[1] care is required to give this notation an unambiguous meaning.

If z = re with r > 0 (polar form), then w = ln r +  is one logarithm of z; adding integer multiples of 2πi gives all the others.[1]

Contents

Problems with inverting the complex exponential function

For a function to have an inverse, it must map distinct values to distinct values. But the complex exponential function does not have this property: ew+2πi = ew for any w, since adding to w has the effect of rotating ew counterclockwise θ radians. Even worse, the infinitely many numbers

\ldots,\;w-4\pi i, \;w-2\pi i, \;w, \;w + 2\pi i, \;w+4\pi i, \;\ldots,

forming a sequence of equally spaced points along a vertical line, are all mapped to the same number by the exponential function. So the exponential function does not have an inverse function in the standard sense.[2][3]

There are two solutions to this problem.

One is to restrict the domain of the exponential function to a region that does not contain any two numbers differing by an integer multiple of 2πi: this leads naturally to the definition of branches of log z, which are certain functions that single out one logarithm of each number in their domains. This is analogous to the definition of sin−1x on [−1,1] as the inverse of the restriction of sin θ to the interval [−π/2,π/2]: there are many real numbers θ with sin θ = x, but one (somewhat arbitrarily) chooses the one in [−π/2,π/2].

Another way to resolve the indeterminacy is to view the logarithm as a function whose domain is not a region in the complex plane, but a Riemann surface that covers the punctured complex plane in an infinite-to-1 way.

Branches have the advantage that they can be evaluated at complex numbers. On the other hand, the function on the Riemann surface is elegant in that it packages together all branches of log z and does not require any choice for its definition.

Definition of principal value

For each nonzero complex number z, the principal value Log z is the logarithm whose imaginary part lies in the interval (−π,π]. The expression Log 0 is left undefined since there is no complex number w satisfying ew = 0.

The principal value can be described also in a few other ways.

To give a formula for Log z, begin by expressing z in polar form, z = re. Given z, the polar form is not quite unique, because of the possibility of adding an integer multiple of 2π to θ, but it can be made unique by requiring θ to lie in the interval (−π,π]; this θ is called the principal value of the argument, and is sometimes written Arg z. Then the principal value of the logarithm[1] can be defined by

Log z: = ln r + iθ = ln  | z | + iArg z.

For example, Log(-3i) = ln 3 − πi/2.

Another way to describe Log z is as the inverse of a restriction of the complex exponential function, as in the previous section. The horizontal strip S consisting of complex numbers w = x+yi such that −π < y ≤ π is an example of a region not containing any two numbers differing by an integer multiple of 2πi, so the restriction of the exponential function to S has an inverse. In fact, the exponential function maps S bijectively to the punctured complex plane \mathbb{C}^* = \mathbb{C} - \{0\}, and the inverse of this restriction is \text{Log}\colon \mathbb{C}^* \to S. The conformal mapping section below explains the geometric properties of this map in more detail.

When the notation log z appears without any particular logarithm having been specified, it is generally best to assume that the principal value is intended. In particular, this gives a value consistent with the real value of ln z when z is a positive real number. The capitalization in the notation Log is used by some authors[1] to distinguish the principal value from other logarithms of z.

A common source of errors in dealing with complex logarithms is to assume that identities satisfied by ln extend to complex numbers. It is true that eLog z = z for all z ≠ 0 (this is what it means for Log z to be a logarithm of z), but the identity Log ez = z fails for z outside the strip S. For this reason, one cannot always apply Log to both sides of an identity ez = ew to deduce z = w. Also, the identity Log(z1z2) = Log z1 + Log z2 can fail: the two sides can differ by an integer multiple of 2πi : for instance,

\text{Log}(-i) = -\frac{\pi i}{2} \ne \frac{\pi i}{2} + \pi i = \text{Log}(i) + \text{Log}(-1).

The function Log z is discontinuous at each negative real number, but continuous everywhere else in \mathbb{C}^*. To explain the discontinuity, consider what happens to Arg z as z approaches a negative real number a. If z approaches a from above, then Arg z approaches π, which is also the value of Arg a itself. But if z approaches a from below, then Arg z approaches −π. So Arg z "jumps" by 2π as z crosses the negative real axis, and similarly Log z jumps by 2πi.

Branches of the complex logarithm

Is there a different way to choose a logarithm of each nonzero complex number so as to make a function L(z) that is continuous on all of \mathbb{C}^*? Unfortunately, the answer is no. To see why, imagine tracking such a logarithm function along the unit circle, by evaluating L at e as θ increases from 0 to 2π. For simplicity, suppose that the starting value L(1) is 0. Then for L(z) to be continuous, L(e) must agree with as θ increases (the difference is a continuous function of θ taking values in the discrete set 2\pi i \mathbb{Z}). In particular, L(e2πi) = 2πi, but e2πi = 1, so this contradicts L(1) = 0.

To obtain a continuous logarithm defined on complex numbers, it is hence necessary to restrict the domain to a smaller subset U of the complex plane. Because one of the goals is to be able to differentiate the function, it is reasonable to assume that the function is defined on a neighborhood of each point of its domain; in other words, U should be an open set. Also, it is reasonable to assume that U is connected, since otherwise the function on different components of U would be unrelated to each other. All this motivates the following definition:

A branch of log z is a continuous function L(z) defined on a connected open subset U of the complex plane such that L(z) is a logarithm of z for each z in U.[1]

For example, the principal value defines a branch on the open set where it is continuous, which is the set \mathbb{C}-\mathbb{R}_{\le 0} obtained by removing 0 and all negative real numbers from the complex plane.

Another example: The Mercator series


\log(1+u)=\sum_{n=1}^\infty \frac{(-1)^{n+1}}{n} u^n
= u - \frac{u^2}{2} + \frac{u^3}{3} - \cdots \,

converges locally uniformly for |u| < 1, so setting z = 1+u defines a branch of log z on the open disk of radius 1 centered at 1. (Actually, this is just a restriction of Log z, as can be shown by differentiating the difference and comparing values at 1.)

Once a branch is fixed, it may be denoted "log z" if no confusion can result. Different branches can give different values for the logarithm of a particular complex number, however, so a branch must be fixed in advance (or else the principal branch must be understood) in order for "log z" to have a precise unambiguous meaning.

Branch cuts

The argument above involving the unit circle generalizes to show that no branch of log z exists on an open set U containing a closed curve that winds around 0. To foil this argument, U is typically chosen as the complement of a ray or curve in the complex plane going from 0 (inclusive) to infinity in some direction. In this case, the curve is known as a branch cut. For example, the principal branch has a branch cut along the negative real axis.

If the function L(z) is extended to be defined at a point of the branch cut, it will necessarily be discontinuous there; at best it will be continuous "on one side", like Log z at a negative real number.

The derivative of the complex logarithm

Each branch L(z) of log z on an open set U is an inverse of a restriction of the exponential function, namely the restriction to the image of U under L. Since the exponential function is holomorphic (i.e., complex differentiable) with nonvanishing derivative, the complex analogue of the inverse function theorem applies. It shows that L(z) is holomorphic at each z in U, and L′(z) = 1/z.[1] Another way to prove this is to check the Cauchy-Riemann equations in polar coordinates.[1]

Constructing branches via integration

The function ln x for x > 0 can be constructed by the formula

\ln x = \int_1^x \frac{1}{u}\,du.

If the range of integration started at a positive number a other than 1, the formula would have to be

\ln x = \ln a + \int_a^x \frac{1}{u}\,du

instead.

In developing the analogue for the complex logarithm, there is an additional complication: the definition of the complex integral requires a choice of path. Fortunately, if the integrand is holomorphic, then the value of the integral is unchanged by deforming the path (while holding the endpoints fixed), and in a simply connected region U (a region with "no holes") any path from a to z inside U can be continuously deformed inside U into any other. All this leads to the following:

If U is a simply connected open subset of \mathbb{C} not containing 0, then a branch of log z defined on U can be constructed by choosing a starting point a in U, choosing a logarithm b of a, and defining
L(z) := b + \int_a^z \frac{1}{w}\,dw.
for each z in U.[4]

The complex logarithm as a conformal map

The circles Re(Log z) = constant and the rays Im(Log z) = constant in the complex z-plane.

Any holomorphic map f\colon U \to \mathbb{C} satisfying f'(z) \ne 0 for all z \in U is a conformal map, which means that if two curves passing through a point a of U form an angle α (in the sense that the tangent lines to the curves at a form an angle α), then the images of the two curves form the same angle α at f(a). Since a branch of log z is holomorphic, and since its derivative 1/z is never 0, it defines a conformal map.

For example, the principal branch w = Log z, viewed as a mapping from \mathbb{C}-\mathbb{R}_{\le 0} to the horizontal strip defined by |Im z| < π, has the following properties, which are direct consequences of the formula in terms of polar form:

  • Circles[5] in the z-plane centered at 0 are mapped to vertical segments in the w-plane connecting a − πi to a + πi, where a is a real number depending on the radius of the circle.
  • Rays emanating from 0 in the z-plane are mapped to horizontal lines in the w-plane.

Each circle and ray in the z-plane as above meet at a right angle. Their images under Log are a vertical segment and a horizontal line (respectively) in the w-plane, and these too meet at a right angle. This is an illustration of the conformal property of Log.

The associated Riemann surface

A visualization of the Riemann surface of log z. The surface appears to spiral around a vertical line corresponding to the origin of the complex plane. The actual surface extends arbitrarily far both horizontally and vertically, but is cut off in this image.

Construction

The various branches of log z cannot be glued to give a single function \log \colon \mathbb{C}^* \to \mathbb{C} because two branches may give different values at a point where both are defined. Compare, for example, the principal branch Log(z) on \mathbb{C}-\mathbb{R}_{\le 0} with imaginary part θ in (−π,π) and the branch L(z) on \mathbb{C}-\mathbb{R}_{\ge 0} whose imaginary part θ lies in (0,2π). These agree on the upper half plane, but not on the lower half plane. So it makes sense to glue the domains of these branches only along the copies of the upper half plane. The resulting glued domain is connected, but it has two copies of the lower half plane. Those two copies can be visualized as two levels of a parking garage, and one can get from the Log level of the lower half plane up to the L level of the lower half plane by going 360° counterclockwise around 0, first crossing the positive real axis (of the Log level) into the shared copy of the upper half plane and then crossing the negative real axis (of the L level) into the L level of the lower half plane.

One can continue by gluing branches with imaginary part θ in (π,3π), in (2π,4π), and so on, and in the other direction, branches with imaginary part θ in (−2π,0), in (−3π,−π), and so on. The final result is a connected surface that can be viewed as a spiralling parking garage with infinitely many levels extending both upward and downward. This is the Riemann surface R associated to log z.

A point on R can be thought of as a pair (z,θ) where θ is a possible value of the argument of z. In this way, R can be embedded in \mathbb{C} \times \mathbb{R} \approx \mathbb{R}^3.

The logarithm function on the Riemann surface

Because the domains of the branches were glued only along open sets where their values agreed, the branches glue to give a single well-defined function \log_R \colon R \to \mathbb{C}.[6] It maps each point (z,θ) on R to ln |z| + . This process of extending the original branch Log by gluing compatible holomorphic functions is known as analytic continuation.

There is a "projection map" from R down to \mathbb{C}^* that "flattens" the spiral, sending (z,θ) to z. For any z \in \mathbb{C}^*, if one takes all the points (z,θ) of R lying "directly above" z and evaluates logR at all these points, one gets all the logarithms of z.

Gluing all branches of log z

Instead of gluing only the branches chosen above, one can start with all branches of log z, and simultaneously glue every pair of branches L_1\colon U_1 \to \mathbb{C} and L_2\colon U_2 \to \mathbb{C} along the largest open subset of U_1 \cap U_2 on which L1 and L2 agree. This yields the same Riemann surface R and function logR as before. This approach, although slightly harder to visualize, is more natural in that it does not require selecting any particular branches.

If U′ is an open subset of R projecting bijectively to its image U in \mathbb{C}^*, then the restriction of logR to U′ corresponds to a branch of log z defined on U. Every branch of log z arises in this way.

The Riemann surface as a universal cover

The projection map R \to \mathbb{C}^* realizes R as a covering space of \mathbb{C}^*. In fact, it is a Galois covering with deck transformation group isomorphic to \mathbb{Z}, generated by the homeomorphism sending (z,θ) to (z,θ+2π).

As a complex manifold, R is biholomorphic with \mathbb{C} via logR. (The inverse map sends z to (ez,Im z).) This shows that R is simply connected, so R is the universal cover of \mathbb{C}^*.

Applications

  • The complex logarithm is needed to define exponentation in which the base is a complex number. Namely, if a and b are complex numbers with a ≠ 0, one can use the principal value to define ab = eb Log a. One can also replace Log a by other logarithms of a to obtain other values of ab.
  • Since the mapping w = Log z transforms circles centered at 0 into vertical straight line segments, it is useful in engineering applications involving an annulus.[citation needed]

Generalizations

Logarithms to other bases

Just as for real numbers, one can define logab = (log b)/(log a) for complex numbers a and b, the only caveat being that its value depends on the choice of a branch of log defined at a and b (with log a ≠ 0). For example, using the principal value gives

\log_i e = \frac{\log e}{\log i} = \frac{1}{\pi i/2} = -\frac{2i}{\pi}.

Logarithms of holomorphic functions

If f is a holomorphic function on a connected open subset U of \mathbb{C}, then a branch of log f on U is a continuous function g on U such that eg(z) = f(z) for all z in U. Such a function g is necessarily holomorphic with g′(z) = f′(z)/f(z) for all z in U.

If U is a simply connected open subset of \mathbb{C}, and f is a nowhere-vanishing holomorphic function on U, then a branch of log f defined on U can be constructed by choosing a starting point a in U, choosing a logarithm b of f(a), and defining

g(z) := b + \int_a^z \frac{f'(w)}{f(w)}\,dw.

for each z in U.[1]

Plots of the complex logarithm function (principal branch)

See also

Notes

  1. ^ a b c d e f g h i Donald Sarason, Complex function theory, 2nd ed., Amer. Math. Society, 2007, Section IV.9.
  2. ^ John B. Conway, Functions of one complex variable, second edition, Springer, 1978, p. 39.
  3. ^ Another interpretation of this is that the "inverse" of the complex exponential function is a multivalued function taking each nonzero complex number z to the set of all logarithms of z.
  4. ^ Serge Lang, Complex analysis, 3rd edition, Springer-Verlag, 1993, p. 121.
  5. ^ Strictly speaking, the point on each circle on the negative real axis should be discarded, or the principal value should be used there.
  6. ^ The notations R and logR are not standard.

References

  • Gino Moretti, Functions of a Complex Variable, Prentice-Hall, Inc., 1964.
  • E. T. Whittaker and G. N. Watson, A Course in Modern Analysis, fourth edition, Cambridge University Press, 1927.

Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Logarithm — The graph of the logarithm to base 2 crosses the x axis (horizontal axis) at 1 and passes through the points with coordinates (2, 1), (4, 2), and (8, 3) …   Wikipedia

  • Complex number — A complex number can be visually represented as a pair of numbers forming a vector on a diagram called an Argand diagram, representing the complex plane. Re is the real axis, Im is the imaginary axis, and i is the square root of –1. A complex… …   Wikipedia

  • Complex argument (continued fraction) — In analysis, the complex argument theta; = arg( z ) is commonly defined as an angle, often in terms of the inverse tangent function, or the inverse cosine. In a purely formal and perfectly rigorous treatment of the complex numbers, such reliance… …   Wikipedia

  • Complex plane — Geometric representation of z and its conjugate in the complex plane. The distance along the light blue line from the origin to the point z is the modulus or absolute value of z. The angle φ is the argument of z. In mathematics …   Wikipedia

  • Logarithm of a matrix — In mathematics, a logarithm of a matrix is another matrix such that the matrix exponential of the latter matrix equals the original matrix. It is thus a generalization of the scalar logarithm and in some sense an inverse function of the matrix… …   Wikipedia

  • Complex analysis — Plot of the function f(x)=(x2 1)(x 2 i)2/(x2 + 2 + 2i). The hue represents the function argument, while the brightness represents the magnitude. Complex analysis, traditionally known as the theory of functions of a complex variable, is the branch …   Wikipedia

  • Complex network — In the context of network theory, a complex network is a graph (network) with non trivial topological features features that do not occur in simple networks such as lattices or random graphs but often occur in real graphs. The study of complex… …   Wikipedia

  • Natural logarithm — Base e redirects here. For the numbering system which uses e as its base, see Non integer representation#Base e. Graph of the natural logarithm function. The function slowly grows to positive infinity as x increases and rapidly goes to negative… …   Wikipedia

  • Super-logarithm — In mathematics, the super logarithm is one of the two inverse functions of tetration. Just as exponentiation has two inverse functions: roots and logarithms, likewise tetration has two inverse functions: super roots and super logarithms. There… …   Wikipedia

  • Common logarithm — The common logarithm. The common logarithm is the logarithm with base 10. It is also known as the decadic logarithm, named after its base. It is indicated by log10(x), or sometimes Log(x) with a capital L (however, this notation is ambiguous… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”