Laser diode rate equations

Laser diode rate equations

The laser diode rate equations model the electrical and optical performance of a laser diode. This system of ordinary differential equations relates the number or density of photons and charge carriers (electrons) in the device to the injection current and to device and material parameters such as carrier lifetime, photon lifetime, and the optical gain.

The rate equations may be solved by numerical integration to obtain a time-domain solution, or used to derive a set of steady state or small signal equations to help in further understanding the static and dynamic characteristics of semiconductor lasers.

The laser diode rate equations can be formulated with more or less complexity to model different aspects of laser diode behavior with varying accuracy.

Multimode rate equations

In the multimode formulation, the rate equations model a laser with multiple optical modes. This formulation requires one equation for the carrier density, and one equation for the photon density in each of the optical cavity modes:

:frac{dN}{dt} = frac{I}{eV} - frac{N}{ au_n} - sum_{mu=1}^{mu=M}G_mu P_mu:frac{dP_mu}{dt} = Gamma_mu(G_mu - frac{1}{ au_p})P_mu + eta_mu frac{N}{ au_n}

where:

M is the number of modes modelled, μ is the mode number, and subscript μ has been added to G, Γ, and β to indicate these properties may vary for the different modes.

The modal gain

Gμ, the gain of the μth mode, can be modelled by a parabolic dependence of gainon wavelength as follows:

: G_mu = frac{alpha N [1-(2frac{lambda(t)-lambda_mu}{deltalambda_g})^2] - alpha N_0}{1 + epsilon sum_{mu=1}^{mu=M}P_mu}

where:α is the gain coefficient and ε is the gain compression factor (see below). λμ is the wavelength of the μth mode, δλg is the full width at half maximum (FWHM) of the gain curve, the centre of which is given by

:lambda(t)=lambda_0 + frac{k(N_{th} - N(t))}{N_{th

where λ0 is the centre wavelength for N = Nth and k is the spectral shift constant (see below). Nth is the carrier density at threshold and is given by

:N_{th}=N_{tr} + frac{1}{alpha au_pGamma}

where Ntr is the carrier density at transparency.

βμ is given by:eta_mu=frac{eta_0}{1+(2(lambda_s-lambda_mu)/deltalambda_s)^2}

where

β0 is the spontaneous emission factor, λs is the centre wavelength for spontaneous emission and δλs is the spontaneous emission FWHM. Finally, λμ is the wavelength of the μth mode and is given by

:lambda_mu=lambda_0 - mudeltalambda + frac{(n-1)deltalambda}{2}

where δλ is the mode spacing.

Gain Compression

The gain term, G, cannot be independent of the high power densities found insemiconductor laser diodes. There are several phenomena which cause the gain to'compress' which are dependent upon optical power. The two main phenomena are
spatial hole burning and spectral hole burning.

Spatial hole burning occurs as a result of the standing wave nature of the opticalmodes. Increased lasing power results in decreased carrier diffusion efficiency whichmeans that the stimulated recombination time becomes shorter relative to the carrierdiffusion time. Carriers are therefore depleted faster at the crest of the wave causing adecrease in the modal gain.

Spectral hole burning is related to the gain profile broadening mechanisms suchas short intraband scattering which is related to power density.

To account for gain compression due to the high power densities in semiconductor lasers, the gain equation is modified such that it becomes related to the inverse of the optical power. Hence, the following term in the denominator of the gain equation :

:1 + epsilon sum_{mu=1}^{mu=M}P_mu

pectral Shift

Dynamic wavelength shift in semiconductor lasers occurs as a result of the changein refractive index in the active region during intensity modulation. It is possible toevaluate the shift in wavelength by determining the refractive index change of the activeregion as a result of carrier injection. A complete analysis of spectral shift during directmodulation found that the refractive index of the active region varies proportionally to carrier density and hence the wavelength varies proportionally to injected current.

Experimentally, a good fit for the shift in wavelength is given by:

:deltalambda=kleft(sqrt{frac{I_0}{I_{th}-1 ight)

where I0 is the injected current and Ith is the lasing threshold current.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Laser diode — Top: a packaged laser diode shown with a penny for scale. Bottom: the laser diode chip is removed from the above package and placed on the eye of a needle for scale …   Wikipedia

  • List of mathematics articles (L) — NOTOC L L (complexity) L BFGS L² cohomology L function L game L notation L system L theory L Analyse des Infiniment Petits pour l Intelligence des Lignes Courbes L Hôpital s rule L(R) La Géométrie Labeled graph Labelled enumeration theorem Lack… …   Wikipedia

  • Physical Sciences — ▪ 2009 Introduction Scientists discovered a new family of superconducting materials and obtained unique images of individual hydrogen atoms and of a multiple exoplanet system. Europe completed the Large Hadron Collider, and China and India took… …   Universalium

  • Avalanche transistor — An Avalanche Transistor is a bipolar junction transistor designed for operation in the region of its collector current/collector to emitter voltage characteristics beyond the collector to emitter breakdown voltage, called avalanche breakdown… …   Wikipedia

  • Optical fiber — A bundle of optical fibers A TOSLINK fiber optic audio c …   Wikipedia

  • Photonics — Refraction of waves of photons (light) by a prism The science of photonics[1] includes the generation, emission, transmission, modulation, signal processing, switching …   Wikipedia

  • Carrier lifetime — A definition in semiconductor physics, carrier lifetime is defined as the average time it takes for a minority carrier to recombine. The process through which this is done is typically known as minority carrier recombination. The energy released… …   Wikipedia

  • computer — computerlike, adj. /keuhm pyooh teuhr/, n. 1. Also called processor. an electronic device designed to accept data, perform prescribed mathematical and logical operations at high speed, and display the results of these operations. Cf. analog… …   Universalium

  • Self-pulsation — takes place at the beginning of laser action.As the pump is switched on, the gainin the active medium rises and exceeds the steady state value. The number of photons in the cavity increases, depleting the gain below the steady state value, and so …   Wikipedia

  • light — light1 lightful, adj. lightfully, adv. /luyt/, n., adj., lighter, lightest, v., lighted or lit, lighting. n. 1. something that makes things visible or affords illumination: All colors depend on light. 2. Physics …   Universalium

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”