M1903 Springfield rifle


M1903 Springfield rifle

Infobox Weapon|is_ranged=yes
name= Rifle, Caliber .30, M1903


origin=flagcountry|United States
type= Bolt-action rifle
designer= Springfield Armory
design_date= 1900
service= 1903–1957
users= See Users
wars= World War I, World War II, Korean War, Vietnam War (limited)
cartridge= .30-03 Springfield; .30-06 Springfield
action= Bolt-action
velocity= convert| 2800|ft/s|0|lk=on|sp=us|abbr=on
weight= ~convert|8.7|lb|kg|1|abbr=on|lk=on depending on wood density
length= convert|44.9|in|mm|0|abbr=on|lk=on
part_length= convert|24|in|mm|0|abbr=on|lk=on
feed= 5-round, 25-round(Air Service variant) stripper clip, internal box magazine
sights= Leaf rear sight, barleycorn-type front sight
"M1903A3": Aperture rear sight, barleycorn-type front sight
variants= See Variants
number= |
The Springfield M1903, formally the United States Rifle, Caliber .30, Model 1903, is an American magazine-fed, bolt-action rifle used primarily during the first half of the 20th century.

It was officially adopted as a United States military service rifle on June 19th 1903, and was officially replaced as a service rifle by the faster-firing, semi-automatic M1 Garand, starting in 1936. The M1903 saw notable use in World War I and World War II, and some cases in Vietnam. It was also used as a sniper rifle in World War II, Korea and Vietnam. Furthermore, it remains in use as a civilian firearm and among some drill teams.

History

Background

The 1903 adoption of the Springfield bolt-action was preceded by nearly 30 years of struggle and politics, as well as lessons learned from the recently adopted U.S. Models 1892-98 Krag and contemporary German Mauser bolt-action rifles. The M1903 not only replaced the various versions of the Krag, but also the Lee Model 1895 and M1885 Remington-Lee used by the U.S. Navy and Marine Corps, as well as the remaining trap-door Springfields (Model 1870). While the Krag had been issued in both a long rifle and carbine, there would be only one Springfield type; this was a break from the existing trend.

The two main problems usually cited with the Krag were its slow-to-load magazine and its inability to handle higher chamber pressures for higher-velocity rounds. Which of these was more important is a matter of debate, as is the impact of the Mausers encountered in the 1898 Spanish American War. What is known is that the Mauser design that competed in the 1890s competition with a stripper clip magazine was defeated by the Krag (as well as many other designs) with its rotary magazine reloaded one cartridge at a time. Note that a special sort of stripper clip for reloading the Krag magazine all at once came later. Also, the Mauser model in the trial had about the same muzzle velocity as the Krag.

After the Krag's adoption, however, there was a trend to greater cartridge power, such as the Model 1893 Spanish Mauser, which generated a flatter trajectory, and a higher muzzle velocity (about 2300 ft/s) from the 7 x 57 mm Spanish Mauser cartridge.

The ballistics of the .30-40 Krag and the 7 x 57 mm Mauser rounds were actually not that much different. Both cartridges had round-nosed bullets; pointed, streamlined bullets (spitzers) were later introduced by Germany. The smokeless powder used by both was an advantage over the older black-powder rifles still used in the war (on both sides of the conflict), such as issued to volunteers and the local militia.U.S. troops were greatly impressed, however, with the volume of fire that the Spanish troops could produce with their faster-loading Mausers, compared to the U.S. Krags.

The U.S. Army attempted to introduce a higher-velocity cartridge in 1899 for the existing Krags, but its single locking lug on the bolt could not handle the extra chamber pressure. A stripper-clip arrangement was also worked out for loading the Krag. It was around the same time that work on a new rifle began.

The fact that the U.S. was adopting a new rifle after only a few years was not actually much of an oddity, as many nations were switching to new firearms in this general period.

Late 1800s: the lead up to adoption

The situation from which the 1903 resulted itself stems from a previous period going back nearly thirty years. Since the late 1870s, the Army had been looking for a replacement for the existing service rifle of the average soldier, the trap-door Springfield (i.e. the Model 1873). The Army was rather underfunded during the period so the regular soldiers were usually stuck with model 1873, though a variety of bolt-action rifles and carbines were also used to varying degrees, and more wealthy soldiers often bought commercial weapons. The Army budget in 1865 was over a million dollars, but this had rapidly tapered down with the end of the U.S. Civil War; the Army budget in 1892 was less than $50,000 a year. The need for a new rifle had become apparent, especially with a switch to a smokeless powder going on (started by the French in 1886). The bolt action Lee rifle in 1879, which had a newly invented detachable box magazine, was adopted in the 1880s in limited numbers by the Navy. A few hundred 1882 Lee Models (M1882 Remington-Lee) were given a trial by the Army during the 1880s, though it was not formally adopted. The Navy went on to field the 1885 model, and later, a rather different style Lee 1895 Model (a straight pull type). Both the 1895 and 1885 would see service in the Spanish American War along with the Army weapons. The detachable box magazine used on the Lee rifle was invented by James Paris Lee, and would be very influential on later designs. Other advancements like the aforementioned smokeless powder had made it clear that a replacement was needed. This led to the 1890s' competitions that resulted in selection of the Krag over 40 other types (including the Mauser design). The Krag types entered production in 1894 after a delay, but would be officially replaced about ten years later by the M1903. The Krag rifles were slowly replaced during the next decade as 1903 rifles became available.

There are various reasons given about why development started on a Mauser based design; the rifle is often said to have been developed due to observations of actions during the Spanish American War, in which Spanish troops were armed with Mauser Model 93 rifles. As mentioned, these were deemed superior to the U.S. Krag-Jørgensen rifles, either attributed to their magazine design or the ballistics of the round. The Mausers were fed from a stripper clip, which tends to allow for faster reloading. While the U.S had actually fielded some removable magazine fed weapons earlier in 19th century (such as the Spencer, or the various Lee models), the Krag was the existing Army service rifle and its 5 round magazine had to be reloaded one cartridge at time. The other issue was that while the Mauser trialled in the 1890s had a muzzle velocity of about 2000 ft/s (600 m/s) (about the same as the Krag), the latest designs being adopted by other countries had gone to higher velocities and the Krag could not handle the increased loads for higher velocity. The extent of the actual effect of the Mausers on the war is a matter of debate, for example only the Spanish regulars had the Mauser 93, while other troops had older single-shot weapons. Whatever the extent, the Army leveraged the events to garner support for a new rifle.

Adoption

The basic time line is that work began on creating a rifle that could handle higher loads and adopted some of Mauser's features, began around the turn of the century by Springfield, with a prototype produced in 1900, and going into production in 1903, thus gaining its nomenclature. There was actually an interim rifle that almost entered production, the Model 1901. Springfield was sure enough that the Model 1901 would be accepted that they began making some parts, but it was not accepted and further changes were asked for. The design was further modified and accepted, type classified and entering production in 1903.

The War Department had exhaustively studied and dissected several examples of the Mauser Model 93 rifle captured during the Spanish-American War, and combined features of both the U.S. Krag Rifle Models 1894-1898, and the Mauser Model 93, to produce the new U.S. Springfield Rifle, Model 1903. Still, the 1903's used so many design features from the German Mauser that the U.S. government paid royalties to Mauserwerke.

By January 1905 over 80,000 of these rifles had been produced at the federally-owned Springfield Armory. However, President Theodore Roosevelt objected to the design of the bayonet used (a rod-type) as being too flimsy for combat. All the rifles to that point consequently had to be re-tooled for a knife-type bayonet, called the M1905. A new improved Model 1904 sight was also added.

The retooling was almost complete when it was decided another change would be made. It was to incorporate improvements discovered during experimentation in the interim, most notably the use of pointed ammunition, first adopted by the French in the 1890s and later other countries. The round itself was based on the .30-03, but rather than a 220-grain (14 g) round-tip bullet fired at 2,300 ft/s (700 m/s), it had a 150-grain (9.7 g) pointed bullet fired at 2,800 ft/s (810 m/s); the case neck was a fraction of an inch shorter as well. The new American cartridge was designated "Cartridge, Ball, Caliber .30, Model of 1906"; this M1906 cartridge is the famous .30-06 ammunition used in countless rifles and machine guns to the present day. The rifle's sights were again re-tooled to compensate for the speed and trajectory of the new cartridge. As further testing revealed that the M1906 cartridge was effective with a shorter, all-purpose barrel length of 24 inches (610 mm) in length, the decision was made to issue the Springfield with a 24" barrel length to both cavalry and infantry forces, an idea adopted by both the British and German armies.

As a whole, the new changes led to a much longer-ranged shoulder arm. Some dubbed it the "weapon of the silent death," since a person could be struck by its bullet before ever hearing the weapon's report.Fact|date=February 2008

World War I and Interwar Use

By the time of U.S. entry into World War I, 843,239 of these rifles had been produced at Springfield Armory and Rock Island Arsenal. Pre-war production utilized questionable metallurgy. Some receivers were improperly subjected to excessive temperatures during the forging process. The carbon could be "burnt" out of the steel producing a brittle receiver. ["Canfield, February 2008, p. 13] Towards the end of the war, Springfield turned out the Model 1903 Mark I. The Mark I has a cut on the left hand side of the receiver meant to act as an ejection port for the Pedersen device, a specialized insert that replaced the bolt and allowed the user to fire .30 caliber pistol cartridges semi-automatically from a detachable magazine. The stock was also slightly cut down on the left side to clear the ejection port. In all other respects, the Mark I is identical to the 1903. Temperature control during forging was improved prior to Mark I production. The receiver alloy was toughened by addition of nickel after Mark I production.

In 1926, after experiencing the effect of long-range German 7.92mm Mauser and machine-gun fire during the war, the U.S. Army adopted the heavy 174-grain boat-tail bullet for its .30-06 cartridge, standardized as 'Cartridge, Ball, caliber 30, M1'. [Barnes, Frank C., "Cartridges of the World", 6th ed., DBI Books Inc. (1989), p. 59] M1 ammunition, intended primarily for long-range machinegun use, soon became known by Army rifle competition teams and expert riflemen for its considerably greater accuracy over that of the M1906 round; the new M2 ammunition was issued to infantrymen with the Springfield rifle as well as to machinegun teams. [Dunlap, Roy, Ordnance Went Up Front, Samworth Press (1948), p. 303] However, during the late 1930s, it became apparent that, with the development of mortars, high-angle artillery, and the .50 caliber Browning M2 machine gun, the need for extreme long-range, rifle-caliber machine-gun fire was decreasing. In 1938, the U.S. army reverted to a .30-06 cartridge with a 152-grain flat-base bullet, now termed M2 Ball, for all rifles and machineguns. [Barnes, Frank C., "Cartridges of the World", 6th ed., DBI Books Inc. (1989), p. 59]

World War II

World War II saw new production of the Springfield at private manufacturers Remington Arms and Smith-Corona Typewriter. Remington began production of the M1903 in September 1941, at serial number 3,000,000, using old tooling from the Rock Island Arsenal which had been in storage since 1919. The very early rifles are almost indistinguishable from 1919-made Rock Island rifles. As the already worn tooling began to wear beyond use Remington began seeking Army approval for a continuously increasing number of changes and simplifications to both speed up manufacture and improve performance. The milled parts on the Remington M1903 were gradually replaced with stamped parts until, at about serial number 3,330,000, the Army and Remington recognized that a new model name was appropriate. Other features of the M1903, such as high-grade walnut stocks with finger grooves, were replaced with less expensive but serviceable substitutes. Most parts made by Remington, stamped or milled, were marked with an "R". M1903 and M1903A1 production was discontinued in favor of the M1903A3. The most noticeable visual difference in the M1903A3 was the replacement of the barrel-mounted rear sight with a smaller, simpler aperture rear sight mounted on the rear of the receiver; it was primarily adopted in order to speed familiarization by soldiers already trained on the M1 Garand, which had a similar sighting system. However, the leaf spring providing tension to the elevation adjustment on the new aperture sight tended to weaken with continued use over time, causing the rifle to lose its preset range elevation setting. [Dunlap, Roy, "Ordnance Went Up Front", Samworth Press (1948), p. 302] Other modifications included a new stamped cartridge follower; ironically, the rounded edges of the new design largely alleviated the 'fourth-round jam' complaints of the earlier machined part. [Dunlap, Roy, "Ordnance Went Up Front", Samworth Press (1948), p. 302] All stock furniture was also redesigned in stamped metal.

In early 1942, Smith-Corona Typewriter Company also began production of the M1903A3 at its plant in Rochester, NY. Smith/Corona parts are usually identified by the absence of markings (Smith/Corona bolts are sometimes marked with an "X" on top of the bolt handle root). To speed production output, two-groove rifled barrels were adopted, and steel alloy specifications were relaxed under 'War Emergency Steel' criteria for both rifle actions and barrels. [Dunlap, Roy, "Ordnance Went Up Front", Samworth Press (1948), p. 362] M1903A3 rifles with two-groove 'war emergency' barrels were shipped with a printed notation stating that the reduction in rifling grooves did not affect accuracy. [Dunlap, Roy, "Ordnance Went Up Front", Samworth Press (1948), p. 301] As the war progressed, various machining and finishing operations were eliminated on the M1903A3 in order to increase production levels. [Dunlap, Roy, "Ordnance Went Up Front", Samworth Press (1948), p. 301]

Original production rifles at Remington and Smith-Corona had a dark gray/black finish similar to the Parkerizing of late World War I. Beginning in late 1943 a lighter gray/green Parkerizing finish was used. This later finish was also used on arsenal repaired weapons.It is somewhat unusual to find a World War I or early World War II M1903 with its original dated barrel. Much, if not all, WW2 .30-06 ammunition used a corrosive primer which left corrosive salts in the barrel. If not removed by frequent and proper barrel cleaning these residues could cause pitting and excessive wear. In the jungle fighting on various Pacific islands cleaning was sometimes lax and the excessive moisture compounded the corrosive action of the residue. [Citation
last = Bishop
first = Chris
author-link =
last2 =
first2 =
author2-link =
title = The Encyclopedia of Weapons of World War II
place = New York
publisher = Orbis Publiishing Ltd
year = 1998
volume =
edition =
url =
doi =
id =
isbn = 0-7607-1022-8
.
]

The M1903 and the M1903A3 rifle were used in combat alongside the M1 Garand by the U.S. military during World War II and saw extensive use and action in the hands of U.S. troops in Europe, North Africa, and the Pacific. The US Marines were initially armed with M1903 rifles in early battles in the Pacific, such as the Battle of Guadalcanal, but the jungle battle environment generally favored self-loading rifles [George, John (Lt Col), "Shots Fired In Anger", NRA Press (1981), p. 391: "Nearly every one [Marine] I talked to [on Guadalcanal] who used the Springfield in combat-without a scope-would have much rather been using a Garand."] ; later Army units arriving to the island were armed with the M1 Garand. [George, John (Lt Col), "Shots Fired In Anger", NRA Press (1981), p. 391] The US Army Rangers were also a major user of the M1903 and the M1903A3 during World War II with the Springfield being preferred over the M1 Garand for certain commando missions. By mid-war, however, US combat troops had been re-equipped with the M1 Garand. However, some front-line infantry units in both the US Army and the US Marine Corps still used the M1903 and the M1903A3 despite large quantities of M1 Garands being made available to front-line troops during the later years of World War II. It remained in service for snipers (using the M1903A4), grenadiers (using a spigot type rifle grenade launcher) and "scout snipers", a type of infantry scout.

The M1903A4 was the U.S. Army's first attempt at a standardized sniper weapon. M1903A3 actions were fitted with a different stock and a Weaver Model 330 or 330C 2.2x telescopic sight in Redfield Jr. mounts; the front and rear iron sights were removed. [Dunlap, Roy, "Ordnance Went Up Front", Samworth Press (1948), p. 302] Barrel specifications were unchanged, and many M1903A4s were equipped with the two-groove 'war emergency' barrel. [George, John (Lt. Col.), "Shots Fired In Anger", NRA Press (1981), p. 392] By all accounts, the M19034 was inadequate as a sniper rifle. [George, John (Lt. Col.), "Shots Fired In Anger", NRA Press (1981), p. 392-393] The M1903A4 rifle magazine could only be singly loaded, one cartridge at a time, due to the mounting of the telescopic sight directly over the action (preventing charging the magazine with 5-round stripper clips). More important, the Weaver scopes (later standardized as the M73 and M73B1) were not only low-powered in magnification, they were not waterproofed, and frequently became waterlogged or fogged over during humidity changes. [George, John (Lt. Col.), "Shots Fired In Anger", NRA Press (1981), p. 392-393] [Dunlap, Roy, "Ordnance Went Up Front", Samworth Press (1948), p. 302] When this occurred, the M1904A4's lack of open front or rear sights rendered the weapon useless. However the rifle had more than adequete stopping power along with accuracy up to about 150 yards. This meant that in the hands of a talented marksmen the rifle was not only useful but quite deadly. Normally used with ordinary M2 ammunition with a 152-grain flat-base bullet, accuracy of the M1903A4 was generally disappointing [Dunlap, Roy, "Ordnance Went Up Front", Samworth Press (1948), p. 303] ; some Army snipers who came across Japanese or German sniper rifles quickly adopted the enemy weapons in place of the Springfield. [George, John (Lt. Col.), "Shots Fired In Anger", NRA Press (1981), p. 296-299] The Marine Corps declined to issue the M1903A4, favoring instead a modified M1903A1 rifle fitted with a Unertl 8x target-type telescopic sight. The U.S. Army Military Police (MP) and the U.S. Navy Shore Patrol also used M1903s and M1903A3s throughout the war. Various U.S. allies and friendly irregular forces were also equipped with the weapon. The 1st Brazilian Infantry Division, operating in the 5th Army in Italy was equipped with Springfield M1903 rifles. In August 1943, the Free French forces of General Charles de Gaulle were re-equipped by the United States primarily with Springfield M1903 and M1917 Enfield rifles. The M1903 became one of the primary rifles used by French forces until the end of the war, and was afterwards used by local militia and security forces in Indochina and French Algeria.

Springfield M1903 rifles captured by the Germans were designated Gewehr 249(a).

Post Korean War Service

After the Korean War, active service (as opposed to drill) use of the M1903 was rare. Still, some numbers of them remained in USMC sniper use as late as the Vietnam War. The U.S. Navy also continued to carry some stocks of M1903A3s on board ships, for use as anti mine rifles.

Today

Due to its balance, it is still popular with various military drill teams and color guards, most notably the U.S. Army Drill Team. M1903 rifles (along with the M1 Garand) are also common at high school Junior Reserve Officer Training Corps (JROTC) units to teach weapons handling and military drill procedures to the cadets. JROTC units use M1903s for regular and inter-school competition drills, including elaborate exhibition spinning routines similar to a majorette spinning a baton. Exhibition teams often use fiberglass stocks in place of wooden stocks, which are heavier and more prone to breakage when dropped. The M1903 is also the standard parade rifle of the Virginia Tech Corps of Cadets, which has over six hundred M1903s, a very small percentage of which are still fireable.

For safety reasons, JROTC M1903s are made permanently unable to fire by having a metal rod welded into the barrel, or having it filled with lead, soldering the bolt and welding the magazine cutoff switch in the ON position.

In 1977, the Army located a rather large cache of un-issued M1903A3 rifles which were then issued to JROTC units as a replacement for their previously issued M1 Garand and M14 rifles, which were then returned to Army custody due to concerns about potential break-ins at high school JROTC armories. After the creation of the privatized Civilian Marksmanship Program (CMP) in 1996, the Army has located additional M1903 and M1903A3 rifles which have been made available for sale to eligible CMP customers. Currently, the CMP does not sell M1903s, but they are planning a sale in January 2009.

pecifications

The US rifle, Model of 1903 was 44 7/8 inches (1.098 m) long and weighed 8 lb 11 oz (3.95 kg). A bayonet could be attached; the M1905 bayonet blade was 16 inches (406 mm) long and weighed 1 lb (0.45 kg). From 1906, the rifle was chambered to fire the .30-caliber M1906 cartridge (.30-06 cartridge), later the M1 (1926) and M2 Ball (1938) rounds. There were four standard types of cartridge:

*Ball— consisted of a brass case or shell, primer, a charge of smokeless powder, and the bullet. The bullet had a sharp point called a spitzer bullet, and was composed of a lead core and a jacket of cupro-nickel (later gilding metal), and in the M1906 design, weighed 150 grains (9.7 g). The bullet of the M1906 cartridge, when fired from the rifle, had an initial velocity of convert|2700|ft|m per second (820 m/s).
*Blank— contained a paper cup instead of a bullet. It is dangerous up to 33 yards (30 m).
*Guard— had a smaller charge of powder than the ball cartridge, and five cannelures encircle the body of the shell at about the middle to distinguish it from ball cartridges. It was intended for use on guard or in riot duty, and it gave good results up to 200 yards (180 m). The range of 100 yards (90 m) required a sight elevation of 450 yards (410 m), and the range of 200 yards (180 m) required an elevation of 645 yards (590 m).
*Dummy— this was tin-plated and the shell was provided with six longitudinal corrugations and three circular holes. The primer contains no percussion composition. It was intended for drill purposes to accustom the soldier to the operation of loading the rifle.

The rifle was sighted for 2,500 yd (2,300 m) and had a point-blank range of 500 yards (457 m). The maximum range of the ball cartridge, when elevated at an angle of 45°, was 4,890 yd (4.47 km), or 2.77 miles .

The rifle was a magazine-fed clip-loader and could fire at a rate of 20 shots per minute. Each stripper clip contained 5 cartridges, and standard issue consisted of 12 clips carried in a cloth bandolier. When full the bandolier weighed about 3 lb 14 oz (1.76 kg). Bandoliers were packed 20 in a box, for a total of 1,200 rounds. The full box weighed 100 pounds (45 kg).The following table gives the approximate maximum penetration in various materials.

150 rounds concentrated at one spot will break a 9 inch (23 cm) wall of brick masonry at 200 yd (180 m).

The bore of the rifle is 0.30 inches (7.62 mm) in diameter. It was then rifled 0.004 in (0.1 mm) deep, making the diameter from the bottom of one groove to the bottom of the opposite groove 0.30787 in (7.82 mm) of the barrel.

The 1903 rifle included a rear sight leaf that could be used to adjust for elevation. When the leaf was flat, the battle sight appeared on top. This sight was set for convert|546|yd|abbr=on., and was not adjustable. When the leaf was raised it could be adjusted to a maximum extreme range of convert|2875|yd|abbr=on. The rear sight could also be adjusted for windage.The 1903A3 rear sight was an aperture sight adjustable both for elevation and windage.

Variants

There were four main variants given official nomenclature, though there are a number of important sub-variants:
*M1903 (1903)— developed for the .30-03 (also known as the .30-45) cartridge. Used original Type S stock.
**M1903 (1905)— changed from a rod type bayonet to the knife type Model 1905 bayonet and to the improved Model 1905 sight.
**M1903 (1906)— modified again to specifically fire the new M1906 .30-06 cartridge ("Ball Cartridge, caliber 30, Model of 1906").
**M1903 Air Service (1914-1918) issued to aircrew with permanent 25 round magazine and modified Type S stock forend.
**M1903 Mark I (~1918)— modified for specific use with the Pedersen device.
*M1903A1 (1930-1939)— changed to a straight stock with different pistol stock grip (Type C stock).Fact|date=March 2007M1903A1 also manufactured by Remington Arms under contract in anticipation of WWII, with Remington producing an estimated 350,000 of these rifles in 1941
*M1903A2 (1930s–40s)— basically a stripped A1 or A3 used as a subcaliber rifle with artillery pieces.
*M1903A3 (1942)— modified for easier production with stamped metal parts and somewhat different grip and stock (late model Type S stock; no finger grooves).
*M1903A4 (1942)— an M1903A3 modified to be a sniper rifle using an M73 or M73B1 2.2X Weaver telescopic sight and different stock.
*M1903 Bushmaster carbine (1940s)— the barrel and stock were cut down convert|18|in|mm for easier use in Panama; 4,725 such rifles were made. It was a training rifle and saw no action. After WWII most were dumped into the ocean and surviving pieces are rare.

There are two main other types, various training types, and competition versions such as the National Match types. Aside from these there are some other civilian versions, experimental versions, and other miscellaneous types. Due to the duration of its service, there is also a range of smaller differences among ones from different periods and manufacturers. In regard to its military use, it is important to note that during WWI it was actually outnumbered by the M1917 Enfield for much of the war. Also, during WW2 many remained in use early on, especially in the Pacific (generally replaced as M1 Garands became available), in addition to service (along with other weapons) as a sniper rifle and to launch rifle grenades.

Literary allusions

The Springfield is the rifle that Francis Macomber uses in Ernest Hemingway's "The Short Happy Life of Francis Macomber". It is also used by the young Rudy Waltz in Kurt Vonnegut's "Deadeye Dick".It figures prominently in "From Here to Eternity" by James Jones as soldiers drill and train with it, and fire it at Japanese aircraft on December 7, 1941

Users

*flag|United States
*PHL
*flag|South Vietnam
*UK
*MEX
*JPN
*ROC

Notes

ee also

*Pedersen device
*Springfield rifle
*M14
*M1 Garand

References

*
*"Engineer Field Manual", War Department, Document No. 355, 1909.
*"Manual for Noncommissioned Officers and Privates of Infantry of The Army of the United States", War Department, Document No. 574, 1917.
*"Bushmaster '03 Carbine," "American Rifle" magazine, April 2005, p. 40.

External links

* [http://m1903.com/ M1903.com]
* [http://www.repligun.com/AirService03/AS-M1903.html M1903 Air Service variant]
* [http://www.snipercountry.com/Articles/SpringfieldM1903.asp SniperCountry.com article on the M1903]
* [http://world.guns.ru/rifle/rfl07-e.htm Springfield M1903 at Modern Firearms]
* [http://144.99.215.51/Data/tmp/objYAsFmXks3WgmXh9DXXTYBjpHeRrj0iQFg2LIUom7xlN3KX73dZtCgWfKNfYlu1xdct7Um1Zcs_uJKz4G3V5w%3D%3D.pdf FM 23-10 Basic Field Manual: U.S. Rifle Caliber .30, M1903, 20 September 1943]
* [http://www.90thidpg.us/Reference/Reference.html 90th Infantry Division Preservation Group] - Reference manual page including several M1903 manuals


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • M1903 Springfield rifle — …   Википедия

  • M1903 Springfield — Springfield M1903 Allgemeine Information Zivile Bezeichnung: Springfield M1903 Militärische Bezeichnung: US Rifle, .30 calibe …   Deutsch Wikipedia

  • M1903 Springfield —         Винтовка Springfield M1903 M1903A1 M1903A3 M1903A4 (США) винтовка M1903 выпуска Springfield armory (1944 год) та же винтовка, вид справа винтовка М1903 вид на ствольную коробку сверху хорошо видны задний боевой упор затвора, направляющие… …   Энциклопедия стрелкового оружия

  • M1903 — M1903, meaning Model of 1903, can refer to a number of different firearms:*M1903 Springfield rifle *FN Model 1903 *Colt Model 1903 Pocket Hammer *Colt Model 1903 Pocket Hammerless …   Wikipedia

  • Springfield Model 1892-99 — Infobox Weapon|is ranged=yes|nameSpringfield Model 1892 99 caption=Close up of the receiver, bolt assembly, and magazine door on a US M1898 Krag Jørgensen Rifle origin=flagcountry|USA type=Bolt action repeating rifle designer=O H J Krag and E… …   Wikipedia

  • Springfield Armory (Massachusetts) — Springfield Arsenal Die Springfield Armory in Massachusetts (Offizielle Bezeichnung National Armory, Springfield) war die wichtigste staatliche Waffenfabrik der USA, die später erstellte Harpers Ferry Armory war kleiner. Sie wurde auf dem Gelände …   Deutsch Wikipedia

  • Springfield M1903 — Тип: Винтовка Страна …   Википедия

  • M1903 — Springfield M1903 Un Springfield M1903 de la Première Guerre mondiale Le Springfield M1903 est un fusil à verrou américain, d abord fabriqué par l usine du même nom, il a été produit par d autres unités de fabrication (Remington, Rockisland). Il… …   Wikipédia en Français

  • Springfield 1903 — Springfield M1903 Un Springfield M1903 de la Première Guerre mondiale Le Springfield M1903 est un fusil à verrou américain, d abord fabriqué par l usine du même nom, il a été produit par d autres unités de fabrication (Remington, Rockisland). Il… …   Wikipédia en Français

  • Springfield M1903 — Allgemeine Information Zivile Bezeichnung: Springfield M1903 …   Deutsch Wikipedia