Production theory basics


Production theory basics

In microeconomics, Production is simply the conversion of inputs into outputs. It is an economic process that uses resources to create a commodity that is suitable for exchange. This can include manufacturing, storing, shipping, and packaging. Some economists define production broadly as all economic activity other than consumption. They see every commercial activity other than the final purchase as some form of production.

Production is a process, and as such it occurs through time and space. Because it is a flow concept, production is measured as a “rate of output per period of time”. There are three aspects to production processes:

# the quantity of the commodity produced,
# the form of the good created,
# the temporal and spatial distribution of the commodity produced.

A production process can be defined as any activity that increases the similarity between the pattern of demand for goods, and the quantity, form, and distribution of these goods available to the market place.

Efficiency and cross-efficiency

A production process is efficient if a given quantity of outputs cannot be produced with any less inputs. It is said to be inefficient when there exists another feasible process that, for any given output, uses less inputs. Some economists (in particular Leibenstein) use the term X-efficiency to indicate that production processes tend to be inherently inefficient due to satisficing behaviour. The “rate of efficiency” is simply the amount of (or value of) outputs divided by the amount of (or value of) inputs. If a production process uses 50 units of input (or $5000 worth of inputs) to produce one unit of output it is more efficient than a process that uses 55 units of input (or $5500 worth of inputs) to produce the same level of output. It is said to be 10% more efficient ({55-50}/50=1/10=10%).

Factors of production

The inputs or resources used in the production process are called "factors of production" by economists. The myriad of possible inputs are usually grouped into six categories. These factors are:
* Raw materials
* Machinery
* Labour services
* Capital goods
* Land
* Entrepreneur

In the “long run”, all of these factors of production can be adjusted by management. The “short run”, however, is defined as a period in which at least one of the factors of production is fixed.

A fixed factor of production is one whose quantity cannot readily be changed. Examples include major pieces of equipment, suitable factory space, and key managerial personnel.

A variable factor of production is one whose usage rate can be changed easily. Examples include electrical power consumption, transportation services, and most raw material inputs. In the short run, a firm’s “scale of operations” determines the maximum number of outputs that can be produced. In the long run, there are no scale limitations.

Total, average, and marginal product

The total product (or total physical product) of a variable factor of production identifies what outputs are possible using various levels of the variable input. This can be displayed in either a chart that lists the output level corresponding to various levels of input, or a graph that summarizes the data into a “total product curve”. The diagram shows a typical total product curve. In this example, output increases as more inputs are employed up until point A. The maximum output possible with this production process is Qm. (If there are other inputs used in the process, they are assumed to be fixed.)

The average physical product is the total product divided by the number of units of variable input employed. It is the output of each unit of input. If there are 10 employees working on a production process that manufactures 50 units per day, then the average product of variable labour input is 5 units per day.

The average product typically varies as more of the input is employed, so this relationship can also be expressed as a chart or as a graph. A typical average physical product curve is shown (APP). It can be obtained by drawing a vector from the origin to various points on the total product curve and plotting the slopes of these vectors.

The marginal physical product of a variable input is the change in total output due to a one unit change in the variable input (called the discrete marginal product) or alternatively the rate of change in total output due to an infinitesimally small change in the variable input (called the continuous marginal product). The discrete marginal product of capital is the additional output resulting from the use of an additional unit of capital (assuming all other factors are fixed). The continuous marginal product of a variable input can be calculated as the derivative of quantity produced with respect to variable input employed. The marginal physical product curve is shown (MPP). It can be obtained from the slope of the total product curve.

Because the marginal product "drives" changes in the average product, we know that when the average physical product is falling, the marginal physical product must be less than the average. Likewise, when the average physical product is rising, it must be due to a marginal physical product greater than the average. For this reason, the marginal physical product curve must intersect the maximum point on the average physical product curve.

Notes: MPP keeps increasing until it reaches its maximum. Up until this point every additional unit has been adding more value to the total product than the previous one. From this point onwards, every additional unit adds less to the total product compared to the previous one – MPP is decreasing. But the average product is still increasing till MPP touches APP. At this point, an additional unit is adding the same value as the average product. From this point onwards, APP starts to reduce because every additional unit is adding less to APP than the average product. But the total product is still increasing because every additional unit is still contributing positively. Therefore, during this period, both, the average as well as marginal products, are decreasing, but the total product is still increasing. Finally we reach a point when MPP crosses the x-axis. At this point every additional unit starts to diminish the product of previous units, possibly by getting into their way. Therefore the total product starts to decrease at this point. This is point A on the total product curve. (Courtesy: Dr. Shehzad Inayat Ali).

Diminishing returns

Diminishing returns can be divided into three categories: 1. Diminishing Total returns, which implies reduction in total product with every additional unit of input. This occurs after point A in the graph. 2. Diminishing Average returns, which refers to the portion of the APP curve after its intersection with MPP curve. 3. Diminishing Marginal returns, refers to the point where the MPP curve starts to slope down and travels all the way down to the x-axis and beyond. Putting it in a chronological order, at first the marginal returns start to diminish, then the average returns, followed finally by the total returns.

Diminishing marginal returns

These curves illustrate the principle of diminishing marginal returns to a variable input (not to be confused with diseconomies of scale which is a long term phenomenon in which all factors are allowed to change). This states that as you add more and more of a variable input, you will reach a point beyond which the resulting increase in output starts to diminish. This point is illustrated as the maximum point on the marginal physical product curve. It assumes that other factor inputs (if they are used in the process) are held constant. An example is the employment of labour in the use of trucks to transport goods. Assuming the number of available trucks (capital) is fixed, then the amount of the variable input labour could be varied and the resultant efficiency determined. At least one labourer (the driver) is necessary. Additional workers per vehicle could be productive in loading, unloading, navigation, or around the clock continuous driving. But at some point the returns to investment in labour will start to diminish and efficiency will decrease. The most efficient distribution of labour per piece of equipment will likely be one driver plus an additional worker for other tasks (2 workers per truck would be more efficient than 5 per truck).

Resource allocations and distributive efficiencies in the mix of capital and labour investment will vary per industry and according to available technology. Trains are able to transport much more in the way of goods with fewer "drivers" but at the cost of greater investment in infrastructure. With the advent of mass production of motorized vehicles, the economic niche occupied by trains (compared with transport trucks) has become more specialized and limited to long haul delivery.

P.S.: There is an argument that if the theory is holding everything constant, the production method should not be changed, i.e., division of labour should not be practiced. However, the rise in marginal product means that the workers use other means of production method, such as in loading, unloading, navigation, or around the clock continuous driving. For this reason, some economists think that the “keeping other things constant” should not be used in this theory.

Many ways of expressing the production relationship

The total, average, and marginal physical product curves mentioned above are just one way of showing production relationships. They express the quantity of output relative to the amount of variable input employed while holding fixed inputs constant. Because they depict a short run relationship, they are sometimes called short run production functions. If all inputs are allowed to be varied, then the diagram would express outputs relative to total inputs, and the function would be a long run production function. If the mix of inputs is held constant, then output would be expressed relative to inputs of a fixed composition, and the function would indicate long run economies of scale.

Rather than comparing inputs to outputs, it is also possible to assess the mix of inputs employed in production. An isoquant (see below) relates the quantities of one input to the quantities of another input. It indicates all possible combinations of inputs that are capable of producing a given level of output.

Rather than looking at the inputs used in production, it is possible to look at the mix of outputs that are possible for any given production process. This is done with a production possibilities frontier. It indicates what combinations of outputs are possible given the available factor endowment and the prevailing production technology.

Isoquants

There are many ways of producing a given level of output. You can use a lot of labour with a minimal amount of capital, or you could invest heavily in capital equipment that requires a minimal amount of labour to operate, or any combination in between. For most goods, there are more than just two inputs. For example in agriculture, the amount of land, water, and fertilizer can all be varied to produce different amounts of a crop. An isoquant, in the two input case, is a curve that shows all the ways of combining two inputs so as to produce a given level of output.

The marginal rate of technical substitution

Isoquants are typically convex to the origin reflecting the fact that the two factors are substitutable for each other at varying rates. This rate of substitutability is called the “marginal rate of technical substitution” (MRTS) or occasionally the “marginal rate of substitution in production”. It measures the reduction in one input per unit increase in the other input that is just sufficient to maintain a constant level of production. For example, the marginal rate of substitution of labour for capital gives the amount of capital that can be replaced by one unit of labour while keeping output unchanged.


"Marginal Rate of Technical Substitution"
To move from point A to point B in the diagram, the amount of capital is reduced from Ka to Kb while the amount of labour is increased only from La to Lb. To move from point C to point D, the amount of capital is reduced from Kc to Kd while the amount of labour is increased from Lc to Ld. The marginal rate of technical substitution of labour for capital is equivalent to the absolute slope of the isoquant at that point (change in capital divided by change in labour). It is equal to 0 where the isoquant becomes horizontal, and equal to infinity where it becomes vertical.

The opposite is true when going in the other direction (from D to C to B to A). In this case we are looking at the marginal rate of technical substitution capital for labour (which is the reciprocal of the marginal rate of technical substitution labour for capital).

It can also be shown that the marginal rate of substitution labour for capital, is equal to the marginal physical product of labour divided by the marginal physical product of capital.

In the unusual case of two inputs that are perfect substitutes for each other in production, the isoquant would be linear (linear, a straight line, with a function y = a - bx). If, on the other hand, there is only one production process available, factor proportions would be fixed, and these zero-substitutability isoquants would be shown as horizontal or vertical lines.

External links

* [http://students.washington.edu/fuleky/anatomy/anatomy.html Anatomy of Cobb-Douglas Type Production Functions in 3D]
* [http://students.washington.edu/fuleky/anatomy/anatomy2.html Anatomy of CES Type Production Functions in 3D]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Production function — Graph of Total, Average, and Marginal Product In microeconomics and macroeconomics, a production function is a function that specifies the output of a firm, an industry, or an entire economy for all combinations of inputs. This function is an… …   Wikipedia

  • Production-possibility frontier — In economics, a production possibility frontier (PPF) or “transformation curve” is a graph that shows the different rates of production of two goods that an economy (or agent) could efficiently produce with limited productive resources. Points… …   Wikipedia

  • List of production topics — Production Contents 1 Overview 2 History 3 General concepts 3.1 Manufacturing and manufacturing systems …   Wikipedia

  • Factors of production — In economics, factors of production means inputs and finished goods means output. Input determines the quantity of output i.e. output depends upon input. Input is the starting point and output is the end point of production process and such input …   Wikipedia

  • Cobb–Douglas production function — A two input Cobb–Douglas production function In economics, the Cobb–Douglas f form of production functions is widely used to represent the relationship of an output to inputs. Similar functions were originally used by Knut Wicksell (1851–1926),… …   Wikipedia

  • Dependency theory — International relations theory  • Idealism  Liberalism   …   Wikipedia

  • Marx's theory of human nature — Part of a series on Marxism …   Wikipedia

  • Toyota Production System — The Toyota Production System (TPS) combines management philosophy and practices to form an integrated socio technical system at Toyota. The TPS organizes manufacturing and logistics for the automobile manufacturer, including interaction with… …   Wikipedia

  • String theory — This article is about the branch of theoretical physics. For other uses, see String theory (disambiguation). String theory …   Wikipedia

  • List of types of systems theory — This list of types of systems theory gives an overview of different types of systems theory, which are mentioned in scientific book titles or articles. [Their are a lot of book titles named ... systems: theory and applications . This leaves the… …   Wikipedia