Fabrication and testing of optical components


Fabrication and testing of optical components

Optical fabrication and testing spans an enormous range of manufacturing procedures and optical test configurations.

The manufacture of a conventional spherical lens typically begins with the generation of the optic's rough shape by grinding a glass blank.[1] This can be done, for example, with ring tools. Next, the lens surface is polished to its final form. Typically this is done by lapping—rotating and rubbing the rough lens surface against a tool with the desired surface shape, with a mixture of abrasives and fluid in between.

During polishing, the lens may be tested to confirm that the desired shape is being produced, and to ensure that the final shape has the correct form to within the allowed precision. The deviation of an optical surface from the correct shape is typically expressed in fractions of a wavelength, for some convenient wavelength of light (perhaps the wavelength at which the lens is to be used, or a visible wavelength for which a source is available). Inexpensive lenses may have deviations of form as large as several wavelengths (λ, 2λ, etc.). More typical industrial lenses would have deviations no larger than a quarter wavelength (λ/4). Precision lenses for use in applications such as lasers, interferometers, and holography have surfaces with a tenth of a wavelength (λ/10) tolerance or better. In addition to surface profile, a lens must meet requirements for surface quality (scratches, pits, specks, etc.) and accuracy of dimensions.

Contents

Overview of techniques used in optical fabrication

I. Glass blank manufacturing

  • Batch mixing
  • Pouring and casting techniques
  • Annealing schedules and equipment
  • Physical characterization techniques
  • Index of refraction measurements and calculation of melt pedigree

II. Diamond shaping techniques

  • Diamond wheel curve generation processes and equipment
  • Diamond edging processes and equipment

III. Loose grit fabrication techniques:

IV. Single-point diamond turning processes and equipment

V. Glass moulding techniques

  • Precision glass moulding

Optical testing techniques

  • Direct surface profile measurement
  • Direct surface surveying (no intervening optics, for example Foucault knife-edge test, Ronchi test, Caustic test)
  • Auxiliary optics (null correctors, computer-generated holograms, etc.)
  • Interferometric testing

See also

Notes and references

  1. ^ Shorey, Aric B.; Golini, Don; Kordonski, William (October 2007). "Surface finishing of complex optics". Optics and Photonics News (Optical Society of America) 18 (10): 14–16. 
  • Malacara, D., Optical Shop Testing - 2nd Edition, John Wiley and Sons, 1992, ISBN 0-471-52232-5

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Optical lens design — refers to the calculation of lens construction parameters (variables) that will meet a set of performance requirements and constraints, including cost and schedule limitations. Construction parameters include surface profile types (spherical,… …   Wikipedia

  • List of optical topics — Probably some Wikipedia articles on topics in optics are not yet listed on this page. If you cannot find the topic you are interested in on this page, the article may nonetheless exist; you can try to find it using the Search box, or look in and… …   Wikipedia

  • Business and Industry Review — ▪ 1999 Introduction Overview        Annual Average Rates of Growth of Manufacturing Output, 1980 97, Table Pattern of Output, 1994 97, Table Index Numbers of Production, Employment, and Productivity in Manufacturing Industries, Table (For Annual… …   Universalium

  • Mathematics and Physical Sciences — ▪ 2003 Introduction Mathematics       Mathematics in 2002 was marked by two discoveries in number theory. The first may have practical implications; the second satisfied a 150 year old curiosity.       Computer scientist Manindra Agrawal of the… …   Universalium

  • Nondestructive testing — or Non destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage.[1] The terms Nondestructive examination (NDE),… …   Wikipedia

  • Optics — For the book by Sir Isaac Newton, see Opticks. Optical redirects here. For the musical artist, see Optical (artist). Optics includes study of dispersion of light. Optics is the branch of …   Wikipedia

  • Glass — This article is about the material. For other uses, see Glass (disambiguation). Moldavite, a natural glass formed by meteorite impact, from Besednice, Bohemia …   Wikipedia

  • Diamond turning — Diamond flycutting Diamond turning is a process of mechanical machining of precision elements using lathes or derivative machine tools (e.g., turn mills, rotary transfers) equipped with natural or synthetic diamond tipped tool bits. The term… …   Wikipedia

  • Index of optics articles — Optics is the branch of physics which involves the behavior and properties of light, including its interactions with matter and the construction of instruments that use or detect it.[1] Optics usually describes the behavior of visible,… …   Wikipedia

  • Fizeau-Interferometer — Ein Fizeau Interferometer[1] (benannt nach seinem Erfinder Hippolyte Fizeau) ist ein spezielles Interferometer, das unter anderem für die Beurteilung der optischen Qualität von Oberflächen und Optiken genutzt wird. Dazu wird eine definierte… …   Deutsch Wikipedia