Noise regulation

Noise regulation

Noise regulation includes statutes or guidelines relating to sound transmission established by national, state or provincial and municipal levels of government. After the watershed passage of the United States Noise Control Act of 1972,[1] other local and state governments passed further regulations. Although the UK and Japan enacted national laws in 1960 and 1967 respectively, these laws were not at all comprehensive or fully enforceable as to address generally rising ambient noise, enforceable numerical source limits on aircraft and motor vehicles or comprehensive directives to local government.


History of noise regulation

Sound level meter, a basic tool in measuring sound.

United States initial legislation

In the 1960s and earlier, few people recognized that citizens might be entitled to be protected from adverse sound level exposure. Most concerted actions consisted of citizens groups organized to oppose a specific highway or airport, and occasionally a nuisance lawsuit would arise. Things in the United States changed rapidly with passage of the National Environmental Policy Act (NEPA) in 1969 and the Noise Pollution and Abatement Act, more commonly called the Noise Control Act (NCA), in 1972. Passage of the NCA was remarkable considering the lack of historic organized citizen concern. However, the United States Environmental Protection Agency (EPA) had testified before Congress that 30 million Americans are exposed to non-occupational noise high enough to cause hearing loss and 44 million Americans live in homes impacted by aircraft or highway noise.[2] NEPA requires all federally funded major actions to be analyzed for all physical environmental impacts including noise pollution, and the NCA directed the EPA to promulgate regulations for a host of noise emissions. Many city ordinances prohibit sound above a threshold intensity from trespassing over property line at night, typically between 10 p.m. and 6 a.m., and during the day restricts it to a higher sound level; however, enforcement is uneven. Many municipalities do not follow up on complaints. Even where a municipality has an enforcement office, it may only be willing to issue warnings, since taking offenders to court is expensive. A notable exception to this rule is the City of Portland, Oregon, which has instituted an aggressive protection for its citizens with fines reaching as high at $5000 per infraction, with the ability to cite a responsible noise violator multiple times in a single day.[3]


Japan actually passed the first national noise control act, but its scope was much more limited than the U.S. law, addressing mainly workplace and construction noise.[4]

Follow-up on initial U.S. laws

Initially these laws had a significant effect on thoughtful study of transportation programs and also federally-funded housing programs in the United States. They also gave states and cities an impetus to consider environmental noise in their planning and zoning decisions, and led to a host of statutes below the federal level. Awareness of the need for noise control was rising. In fact, by 1973 a national poll of 60,000 U.S. residents found that sixty percent of people considered street noise to have a "disturbing, harmful or dangerous" impact.[5] This trend continued strongly throughout the 1970s in the U.S., with about half of the states and hundreds of cities passing substantive noise control laws. Noise regulation subsided sharply in 1981, when Congress ended funding for the NCA. EPA had pre-empted lower levels of government from regulating sources, so states could not legislate standards such as for truck noise emissions. Thus, in areas where the federal government had failed to promulgate clear standards (such as aircraft noise), no further progress could be made except by the Federal Aviation Administration (FAA), which has an inherent conflict of interest regarding noise regulation.

Nevertheless some states continued to act. California carried out an ambitious plan to require its cities to establish a "Noise Element of the General Plan," which provides guidance for land planning decisions to minimize noise impacts on the public. Many cities throughout the U.S. also have noise ordinances, which specifies the allowable sound level that can cross property lines. These ordinances can be enforced with local police powers.[6]

Europe and Asia

Several European countries emulated the U.S. national noise control law: Netherlands (1979), France (1985), Spain (1993), and Denmark (1994). In some cases unlegislated innovations have led to quieter products exceeding legal mandates (for example, hybrid vehicles or best available technology in washing machines). In any case, the legacy of the NCA has transformed irreversibly the way people think about noise and the intrinsic right to be protected from adverse sound levels.

Beyond the U.S. activities the European countries generally lag by 10 to 20 years. For example, Britain’s National Environmental Protection Act of 1990 is stimulating research in the year 2006 aimed at setting certain definitive noise standards. Russia, China and undeveloped countries lag even further behind.[citation needed]

National controls in the U.S. program

After the passage of the NCA, EPA promulgated regulations setting maximum noise limits on a gamut of motor vehicles, industrial machinery and household appliances. The Agency conducted extensive testing and consulted with industry on the practicality of manufacturing quieter devices. EPA's efforts had an influence on the future of a quieter generation of machines. However, roadway noise and aircraft noise account for the lion’s share of noise emissions, and the EPA standards for those vehicles pre-empted states from further regulating. In the case of aircraft noise, FAA had veto power over EPA recommendations, so those standards never pushed the envelope.

In the case of motor vehicles, states could not exact a greater standard for enforcement against an individual vehicle, and interstate commerce priorities meant that guidelines for total noise exposure along federally funded highways remained guidelines rather than strict standards. Despite these drawbacks, states and the public at large had a superb weapon in the review of proposed major transportation systems in the form of NEPA and the NCA. In many cases courts were able to enforce the intent of those laws to secure the redesign of roadways and transit systems to provide more noise mitigation or to select an alternative of lesser impact than the original project; in many other cases, the highway agencies simply listened to public input and acoustical scientists before finalizing highway and transit designs.

In the case of airport expansions, courts consistently upheld the sovereignty of the FAA over the EPA, in allowing air traffic needs to be met over environmental concerns. Thus airports were required to study impacts of air traffic and facilities expansions and provide detailed noise contour maps, but in the final analysis the EPA exposure guidelines only advisory in nature. To respond to the shortcomings of the voluntary guidelines, FAA created a well funded program to insulate thousands of homes in the vicinity of major airports. The program was based upon computer modeling of alternative insulation strategies, calculated on a house-by- house basis. While this program did nothing to mitigate exterior sound levels, it benefited residential interiors significantly.[citation needed]

U.S. State and local planning

States passed two different types of legislation starting in the 1970s, echoing the federal lead in noise control. First, many states, with California in the vanguard on a state level, began requiring each municipality and county to have a Noise Element of the General Plan, a substantial noise data base and blueprint for making land use decisions in that jurisdiction. The Noise Element became an integral part of the municipal or county General Plan, especially in California. This document compiled a comprehensive set of measurements setting forth existing sound levels, frequently in the form of sound level contour maps to illustrate where varying sound levels fall relative to land use categories. The Noise Element further states goals for each land use class and even numerical planning standards in order to evaluate future development proposals with regard to noise pollution. Technical analysis of urban highway noise had advanced by the early 1970s to allow intricate analysis of urban planning decisions in order to plan and design urban highways and support associated noise regulations.[7]

Cities and counties in the U.S., who either fell under state mandates or who voluntarily chose to control noise through land use decisions, were active in categorizing sound levels and seeking development strategies that would minimize the number of persons exposed to harmful levels of (primarily) motor vehicle noise. Portland, Oregon continues to innovate through its almost 35 year old Noise Control Office at the City's Bureau of Development Services. Today its code is still one of the only comprehensive codes in the U.S. that not only regulates based on a given decibel level, but also includes sound limitations based on the specific pitch or frequency of the given noise.[citation needed]

Local noise ordinances in U.S. and Europe

Local ordinances are principally aimed at construction noise, power equipment operated by individuals and unmuffled industrial noise penetrating residential areas. Thousands of U.S. cities have prepared noise ordinances that give noise control officers and police the power to investigate noise complaints and enforcement power to abate the offending noise source, through shutdowns and fines.[6] In the 1970s and early 1980s there was even a professional association for noise enforcement officers called NANCO, "National Association of Noise Control Officials." Today only a handful of properly trained Noise Control Officers remain in the United States. A typical noise ordinance sets forth clear definitions of acoustic nomenclature and defines categories of noise generation; then numerical standards are established, so that enforcement personnel can take the necessary steps of warnings, fines or other municipal police power to rectify unacceptable noise generation. Ordinances have achieved certain successes but they can be thorny to implement. Many European cities are still treating noise as the U.S. did in the 1960s, as a nuisance and not as a numerical standard to be achieved.[citation needed]

Building codes

In the case of construction of new (or remodeled) apartments, condominiums, hospitals and hotels, many U.S. states and cities have stringent building codes with requirements of acoustical analysis, in order to protect building occupants from exterior noise sources and sound generated within the building itself.[8]. With regard to exterior noise, the codes usually require measurement of the exterior acoustic environment in order to determine the performance standard required for exterior building skin design. The architect can work with the acoustical scientist to arrive at the best cost-effective means of creating a quiet interior (normally 45 dBA). The most important elements of design of the building skin are usually: glazing (glass thickness, double pane design, etc.), roof material, caulking standards, chimney baffles, exterior door design, mail slots, attic ventilation ports and mounting of through the wall air conditioners. A special case of building skin design arises in the case of aircraft noise, where the FAA has funded extensive work in residential retrofit.

Regarding sound generated inside the building, there are two principal types of transmission. First, airborne sound travels through walls or floor/ceiling assemblies and can emanate from either human activities in adjacent living spaces or from mechanical noise within the building systems. Human activities might include voice, amplified sound systems or animal noise. Mechanical systems are elevator systems, boilers, refrigeration or air conditioning systems, generators and trash compactors. Since many of these sounds are inherently loud, the principle of regulation is to require the wall or ceiling assembly to meet certain performance standards (typically Sound Transmission Class of 50), which allows considerable attenuation of the sound level reaching occupants.

The second type of interior sound is called Impact Insulation Class (IIC) transmission. This effect arises not from airborne transmission, but rather from transmission of sound through the building itself. The most common perception of IIC noise is from footfall of occupants in living spaces above. This type of noise is somewhat more difficult to abate, but consideration must be given to isolating the floor assembly above or hanging the lower ceiling on resilient channel. Commonly a performance standard of IIC equal to 50 is specified in building codes. California has generally led the U.S. in widespread application of building code requirements for sound transmission; accordingly, the level of protection for building occupants has increased markedly in the last several decades.

U.S. occupational safety regulations

The U.S. Occupational Safety and Health Administration has established maximum noise levels for occupational exposure, beyond which mitigation measures or personal protective equipment is required.[9]

See also


  1. ^ U.S. Noise Pollution and Abatement Act of 1972, P.L. 92-574, 86 Stat. 1234, 42 U.S.C. § 4901 - 42 U.S.C. § 4918
  2. ^ U.S. Senate Public Works Committee. "Noise Pollution and Abatement Act of 1972." S. Rep. No. 1160, 92nd Cong. 2nd session
  3. ^ "City of Portland Code and Charter." Title 18, Chapter 18.18 "Title 18 Noise Control"
  4. ^ Government of Japan. Ministry of Environment. Law No. 98 of 1968. Latest amendment by Law No. 91 of 2000.
  5. ^ U.S. Department of Housing and Urban Development survey. As reported by Kenneth Eldred at the Fifth International Congress on Noise as an International Problem, Sweden, 1988.
  6. ^ a b Noise Pollution Clearinghouse, Montpelier, VT. "Noise Regulations & Ordinances of U.S. Cities, Counties and Towns." Accessed 2010-08-19.
  7. ^ Hogan, C. Michael (09 1973). "Analysis of Highway Noise". Water, Air, & Soil Pollution (Springer) 2 (3): 387–392. doi:10.1007/BF00159677. ISSN 0049-6979. 
  8. ^ Harris, David A. (1997). Noise Control Manual for Residential Buildings. New York: McGraw-Hill Professional. ISBN 978-0070269422. 
  9. ^ U.S. Occupational Safety and Health Administration. Washington, D.C. "Occupational noise exposure." Code of Federal Regulations, 29 C.F.R. 1910.95

External links

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Noise mitigation — is a set of strategies to reduce noise pollution. The main areas of noise mitigation or abatement are: transportation noise control, architectural design, and occupational noise control. Roadway noise and aircraft noise are the most pervasive… …   Wikipedia

  • Noise health effects — are the health consequences of elevated sound levels. Elevated workplace or other noise can cause hearing impairment, hypertension, ischemic heart disease, annoyance, sleep disturbance, and decreased school performance. Changes in the immune… …   Wikipedia

  • Noise — This article is about noise as an unwanted phenomenon. For other uses, see Noise (disambiguation). NASA researchers at Glenn Research Center conducting tests on aircraft engine noise in 1967 In common use, the word noise means any unwanted …   Wikipedia

  • Regulation and monitoring of pollution — To protect the environment from the adverse effects of pollution, many nations worldwide have enacted legislation to regulate various types of pollution as well as to mitigate the adverse effects of pollution. Regulation and monitoring by… …   Wikipedia

  • Noise Control Act — The Noise Pollution and Abatement Act of 1972 is a statute of the United States initiating a federal program of regulating noise pollution with the intent of protecting human health and minimizing annoyance of noise to the general public.[1] The… …   Wikipedia

  • Noise pollution — A Boeing 747 400 passes close to houses shortly before landing at London Heathrow Airport Noise pollution is excessive, displeasing human, animal or machine created environmental noise that disrupts the activity or balance of human or animal life …   Wikipedia

  • Noise barrier — The sound tube in Melbourne, Australia, designed to reduce roadway noise without detracting from the area s aesthetics. A noise barrier (also called a soundwall, sound berm, sound barrier, or acoustical barrier) is an exterior structure designed… …   Wikipedia

  • Noise (acoustic) — Acoustic noise is any sound in the acoustic domain, either deliberate (music, speech, etc.) or unintended. It is important to recognise that the term noise is also used to refer to other, non audible forms, especially in electronics and in the… …   Wikipedia

  • Noise dosimeter — A noise dosimeter (American) or noise dosemeter (British) is a specialized sound level meter intended specifically to measure the noise exposure of a person integrated over a period of time; usually to comply with Health and Safety regulations… …   Wikipedia

  • List of noise topics — This is a list of noise topics. Contents 1 Engineering and physics 2 Environmental 3 Noise reduction 4 Music …   Wikipedia